SN75124N - Triple Line Receiver | Texas Instruments
MPN: SN75124N ✓ AktifSN75124N Ringkasan
A line receiver is an interface IC that restores valid logic levels from signals degraded by distance, capacitance, crosstalk, or transmission-line reflections. Within the interface hierarchy, the SN75124N belongs to the receiver family of TTL-compatible logic and bus-interface components, where it sits between a noisy physical communication link and digital processing logic. Differential reception is especially useful when a system must distinguish a valid transition from common-mode noise.
The principal benefits of the SN75124N are its three-channel architecture, single 5 V operation, TTL compatibility, and integrated input hysteresis. Combining three receivers in one 16-pin PDIP reduces component count and board area in equipment requiring several independent communication channels. The hysteresis helps a receiver ignore small voltage disturbances near its switching threshold, improving dependable operation in systems with noisy interconnects.
According to the Texas Instruments datasheet, the SN75124 was specifically designed to meet the input/output interface specifications for IBM System 360. It is also compatible with standard TTL logic and supply voltage levels. These details position the device as a legacy-compatible interface solution rather than a modern multi-gigabit transceiver, making it most appropriate for established TTL or IBM System 360 equipment.
Typical applications include IBM-compatible computer peripherals, industrial control interfaces, legacy storage equipment, telecommunications equipment, and embedded systems that receive differential signals with TTL-level outputs. It can also be evaluated in instrumentation or test systems where a short cable or backplane connection introduces noise but remains within the receiver's supported signal and supply conditions.
The primary design consideration is verifying that the connected signal amplitude, common-mode range, bus loading, and system thresholds satisfy the SN75124N requirements. Designers should also account for TTL input and output levels, supply decoupling, unused receiver channels, and any protection needed for externally accessible connectors. The 16-pin PDIP format favors through-hole assembly and repairability rather than compact surface-mount production.
This page combines the manufacturer interface description, package information, application guidance, verified-equivalent checks, and practical selection considerations. It also distinguishes a genuine pin-to-pin replacement from a merely similar line receiver, helping engineers avoid substitutions that change channel count, pin assignment, logic polarity, or electrical requirements.
Pilihan pengganti yang segera untuk SN75124N — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.
Varietas dalam siri ini
Model serupa yang kompatibel dengan pengganti yang segera SN75124N (sama faktor bentuk dan kaki) — berbeza dalam Logic Compatibility, Output State, Product Type.
Tiada pilihan pengganti yang segera untuk produk ini.
Minta AlternatifSN75124N Spesifikasi
| Product Type | Triple differential line receiver |
| Receiver Channel Count | 3 channels |
| Tegangan Pemberi Arus | 5 V |
| Logic Compatibility | TTL compatible |
| Input Threshold Hysteresis | Built in |
| Interface Standard | IBM System 360 input/output interface |
| Kemasan | 16-pin PDIP |
| Jenis Pemasangan | Through-hole |
| Gambaran Suhu Operasi | 0 °C to 70 °C |
| Output State | 0 or 3 receiver output states |
Panduan Konfigurasi Pin SN75124N 16-pin pdip
Konfigurasi pin untuk SN75124N (16-pin pdip pakai). Penomeran pin, fungsi, dan garis bentuk koneksi ditakrifkan dalam dokumen pengeluar. Rujuk dokumen untuk kebentuk dan pedoman pengasman.
Tiada data garisan pin yang diperoleh untuk SN75124N.
Rujuk kepada lembaran data untuk konfigurasi pin penuh.
Aplikasi Biasa
SN75124N patut untuk 6 aplikasis: IBM System 360 Peripheral Interfaces, Legacy TTL Bus Reception, Industrial Control Signal Conditioning, Telecommunications Equipment Interfaces, Legacy Storage and Peripheral Equipment, Laboratory and Test Equipment.
IBM System 360 Peripheral Interfaces
The SN75124N fits legacy IBM System 360 input/output interfaces because Texas Instruments designed the triple receiver to meet their interface requirements. Its three differential channels provide independent receive paths in one 16-pin PDIP device, reducing the number of separate receiver packages required on an interface card. The 5 V supply and TTL-compatible levels simplify connection to established digital logic, while built-in input-threshold hysteresis helps suppress small disturbances on affected lines. Before implementation, verify the actual connector, signal levels, termination, grounding, and timing against the system and manufacturer electrical-characteristics tables.
Disebarkan
Legacy TTL Bus Reception
The SN75124N is useful in legacy TTL bus receivers where noisy interconnect lines must produce stable standard logic outputs. Each of its three receiver channels can help reject disturbances near the switching threshold, and the integrated design reduces the board area required for three discrete receiver functions. The single 5 V supply aligns with established TTL system rails, while the through-hole PDIP package supports repairable and prototype-oriented assemblies. Engineers should confirm signal amplitude, common-mode limits, output loading, and propagation timing before replacing an existing receiver or extending a cable connection.
Disebarkan
Industrial Control Signal Conditioning
The SN75124N can support commercial-temperature industrial equipment that receives noisy differential signals from control or peripheral subsystems. Three receiver channels in one 16-pin PDIP package provide a practical way to condition multiple logic connections, while the built-in hysteresis improves stability when input levels cross the threshold slowly or contain low-level noise. The design must still validate the industrial environment: the listed 0 °C to 70 °C range may be insufficient, and external surge, ESD, and common-mode protection may be required according to the interface and enclosure requirements.
Disebarkan
Telecommunications Equipment Interfaces
The SN75124N is applicable to telecommunications and data-processing equipment that uses TTL-compatible differential receive channels. Its three-channel arrangement supports several incoming communications lines from one package, and the 5 V operating supply simplifies integration into conventional logic boards. Input hysteresis can improve tolerance of small disturbances introduced by internal wiring, backplanes, or imperfect connectors. For field-connected or long-distance interfaces, however, the design must include suitable protection and verify that cable transients remain within the receiver's permitted input and common-mode conditions.
Disebarkan
Legacy Storage and Peripheral Equipment
The SN75124N can be used as the receive element in legacy storage peripherals, printer interfaces, and computer support equipment that relies on IBM-style or TTL-compatible signaling. Three independent receivers make the part suitable for multi-line command, status, or acknowledgment paths, while the PDIP footprint favors repairable through-hole circuit boards. System integration should focus on confirming channel assignment, logic polarity, receiver enable requirements, and timing. If the board also uses bidirectional bus functions, a transceiver such as MC74F243M may be needed alongside or instead of a receive-only device.
Disebarkan
Laboratory and Test Equipment
The SN75124N is suitable for test and laboratory equipment that needs to recover digital information from a noisy differential link. Three receiver channels allow several instrument-control or status signals to share one package, and the built-in threshold hysteresis reduces susceptibility to small voltage fluctuations around the decision point. The 16-pin PDIP format is practical for breadboards, prototypes, and repair-oriented instruments. Before connecting equipment to external leads, engineers should establish grounding, add appropriate transient protection, and confirm that the signal amplitude and common-mode level remain compatible with the manufacturer's specified operating conditions.
Disebarkan
Ringkasan Produk Disebarkan
Data referensi kejuruteraan untuk SN75124N — perbandingan, panduan rancangan, dan maklumat kesediaan
Panduan Pilihan
Perbandingan dengan Gantian
| Parametr | Produk Ini |
|---|---|
| Product Type | Triple differential line receiver |
| Brand | Texas Instruments |
| Package | 16-pin PDIP |
| Receiver Channel Count | 3 channels |
| Supply Voltage | 5 V |
| Logic Compatibility | TTL compatible |
| Input Threshold Hysteresis | Built in |
| Interface Target | IBM System 360 input/output interface |
| Operating Temperature Range | 0 °C to 70 °C |
| Mounting Type | Through-hole |
Penyeberangsung Jelas
- Purpose-built IBM System 360 receive interface (vsGeneric triple line receivers)
- Three receiver functions in one package (vsSingle-channel receiver implementations)
- Integrated input-threshold hysteresis (vsReceivers without threshold hysteresis)
- Straightforward legacy-system integration (vsModern multi-voltage interface devices)
Catatan Desain
Place the SN75124N in the same logic-ground domain as the receiver's downstream TTL circuitry. Keep the package, input traces, and decoupling connections compact, and route differential inputs away from switching nodes and unrelated clock or relay-control lines. Because this is a 16-pin PDIP device, check drilling, lead spacing, socket clearance, and component height during PCB layout rather than substituting a surface-mount footprint.
Validate the complete receiver path with the intended source impedance, cable length, connector, and termination arrangement. Built-in input hysteresis improves rejection of small disturbances, but it does not compensate for excessive loading, reflections, or out-of-range common-mode voltage. Confirm the manufacturer's input threshold, allowed voltage range, output loading, and timing limits before changing the existing interface network.
Do not substitute a receiver merely because it is labeled a triple or differential line receiver. Pin compatibility requires matching channel assignments, enable and ground connections, differential input polarity, 5 V supply expectations, and TTL output levels. Also verify how unused channels are handled and whether enable pins must be tied to defined logic states, as incorrect connection can prevent the receiver from operating reliably.
Use a stable 5 V supply and place suitable bypass capacitance close to the device's supply and ground pins. The SN75124N is a digital interface IC rather than a power-conversion component, so its principal supply concern is clean rail delivery and correct grounding. Size and place bypass capacitance according to the manufacturer's application guidance and the switching characteristics of surrounding equipment rather than treating the line receiver as a local regulator.
Maklumat Kesediaan
The manufacturer datasheet identifies legacy IBM System 360 and TTL-compatible applications. Explicit RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations were not established, so those fields remain unknown.