Texas Instruments

SN75124N - Triple Line Receiver | Texas Instruments

MPN: SN75124N ✓ فعال
5 V Vdss 16-pin PDIP Package
حداقل سفارش: 1 |

SN75124N نمای کلی

Texas Instruments SN75124N is a triple differential line receiver designed for IBM System 360 input/output interfaces and compatible with standard TTL logic. It operates from a single 5 V supply, provides three receiver channels in a 16-pin PDIP package, and includes built-in input-threshold hysteresis for improved noise immunity.

A line receiver is an interface IC that restores valid logic levels from signals degraded by distance, capacitance, crosstalk, or transmission-line reflections. Within the interface hierarchy, the SN75124N belongs to the receiver family of TTL-compatible logic and bus-interface components, where it sits between a noisy physical communication link and digital processing logic. Differential reception is especially useful when a system must distinguish a valid transition from common-mode noise.

The principal benefits of the SN75124N are its three-channel architecture, single 5 V operation, TTL compatibility, and integrated input hysteresis. Combining three receivers in one 16-pin PDIP reduces component count and board area in equipment requiring several independent communication channels. The hysteresis helps a receiver ignore small voltage disturbances near its switching threshold, improving dependable operation in systems with noisy interconnects.

According to the Texas Instruments datasheet, the SN75124 was specifically designed to meet the input/output interface specifications for IBM System 360. It is also compatible with standard TTL logic and supply voltage levels. These details position the device as a legacy-compatible interface solution rather than a modern multi-gigabit transceiver, making it most appropriate for established TTL or IBM System 360 equipment.

Typical applications include IBM-compatible computer peripherals, industrial control interfaces, legacy storage equipment, telecommunications equipment, and embedded systems that receive differential signals with TTL-level outputs. It can also be evaluated in instrumentation or test systems where a short cable or backplane connection introduces noise but remains within the receiver's supported signal and supply conditions.

The primary design consideration is verifying that the connected signal amplitude, common-mode range, bus loading, and system thresholds satisfy the SN75124N requirements. Designers should also account for TTL input and output levels, supply decoupling, unused receiver channels, and any protection needed for externally accessible connectors. The 16-pin PDIP format favors through-hole assembly and repairability rather than compact surface-mount production.

This page combines the manufacturer interface description, package information, application guidance, verified-equivalent checks, and practical selection considerations. It also distinguishes a genuine pin-to-pin replacement from a merely similar line receiver, helping engineers avoid substitutions that change channel count, pin assignment, logic polarity, or electrical requirements.

جایگزین‌های drop-in برای SN75124N — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.

گونه‌ها در این سری

مدل‌های هم‌سری که جایگزین مستقیم هستند برای SN75124N (همان فرم‌فاکتور و فوت‌پرینت) — متفاوت در Logic Compatibility, Output State, Product Type.

Texas Instruments
Logic Compatibility: Standard TTL
Output State: Uncommitted output
Product Type: Dual line driver
مقایسه با SN75124N →

هیچ جایگزین مستقیمی برای این محصول موجود نیست.

درخواست جایگزین

SN75124N مشخصات

Product Type Triple differential line receiver
Receiver Channel Count 3 channels
ولتاژ تغذیه 5 V
Logic Compatibility TTL compatible
Input Threshold Hysteresis Built in
Interface Standard IBM System 360 input/output interface
بسته‌بندی 16-pin PDIP
نوع نصب Through-hole
محدوده دمای کاری 0 °C to 70 °C
Output State 0 or 3 receiver output states

راهنمای پیکربندی پین SN75124N 16-pin pdip

پیکربندی پین برای SN75124N (پکیج 16-pin pdip). شماره‌گذاری پایه‌ها، عملکردها و نمودارهای اتصال در دیتاشیت سازنده تعریف شده است. برای footprint دقیق و دستورالعمل‌های لحیم‌کاری به آن مراجعه کنید.

نمودار پین‌آوت پکیج 16-pin pdip برای SN75124N

داده پین‌آوت تفصیلی موجود نیست برای SN75124N.

به دیتاشیت برای پیکربندی کامل پین‌ها.

کاربردهای معمول

SN75124N مناسب است برای 6 کاربردs: IBM System 360 Peripheral Interfaces, Legacy TTL Bus Reception, Industrial Control Signal Conditioning, Telecommunications Equipment Interfaces, Legacy Storage and Peripheral Equipment, Laboratory and Test Equipment.

🖥️

IBM System 360 Peripheral Interfaces

The SN75124N fits legacy IBM System 360 input/output interfaces because Texas Instruments designed the triple receiver to meet their interface requirements. Its three differential channels provide independent receive paths in one 16-pin PDIP device, reducing the number of separate receiver packages required on an interface card. The 5 V supply and TTL-compatible levels simplify connection to established digital logic, while built-in input-threshold hysteresis helps suppress small disturbances on affected lines. Before implementation, verify the actual connector, signal levels, termination, grounding, and timing against the system and manufacturer electrical-characteristics tables.

🔧

Legacy TTL Bus Reception

The SN75124N is useful in legacy TTL bus receivers where noisy interconnect lines must produce stable standard logic outputs. Each of its three receiver channels can help reject disturbances near the switching threshold, and the integrated design reduces the board area required for three discrete receiver functions. The single 5 V supply aligns with established TTL system rails, while the through-hole PDIP package supports repairable and prototype-oriented assemblies. Engineers should confirm signal amplitude, common-mode limits, output loading, and propagation timing before replacing an existing receiver or extending a cable connection.

🏭

Industrial Control Signal Conditioning

The SN75124N can support commercial-temperature industrial equipment that receives noisy differential signals from control or peripheral subsystems. Three receiver channels in one 16-pin PDIP package provide a practical way to condition multiple logic connections, while the built-in hysteresis improves stability when input levels cross the threshold slowly or contain low-level noise. The design must still validate the industrial environment: the listed 0 °C to 70 °C range may be insufficient, and external surge, ESD, and common-mode protection may be required according to the interface and enclosure requirements.

🌐

Telecommunications Equipment Interfaces

The SN75124N is applicable to telecommunications and data-processing equipment that uses TTL-compatible differential receive channels. Its three-channel arrangement supports several incoming communications lines from one package, and the 5 V operating supply simplifies integration into conventional logic boards. Input hysteresis can improve tolerance of small disturbances introduced by internal wiring, backplanes, or imperfect connectors. For field-connected or long-distance interfaces, however, the design must include suitable protection and verify that cable transients remain within the receiver's permitted input and common-mode conditions.

🖥️

Legacy Storage and Peripheral Equipment

The SN75124N can be used as the receive element in legacy storage peripherals, printer interfaces, and computer support equipment that relies on IBM-style or TTL-compatible signaling. Three independent receivers make the part suitable for multi-line command, status, or acknowledgment paths, while the PDIP footprint favors repairable through-hole circuit boards. System integration should focus on confirming channel assignment, logic polarity, receiver enable requirements, and timing. If the board also uses bidirectional bus functions, a transceiver such as MC74F243M may be needed alongside or instead of a receive-only device.

🧪

Laboratory and Test Equipment

The SN75124N is suitable for test and laboratory equipment that needs to recover digital information from a noisy differential link. Three receiver channels allow several instrument-control or status signals to share one package, and the built-in threshold hysteresis reduces susceptibility to small voltage fluctuations around the decision point. The 16-pin PDIP format is practical for breadboards, prototypes, and repair-oriented instruments. Before connecting equipment to external leads, engineers should establish grounding, add appropriate transient protection, and confirm that the signal amplitude and common-mode level remain compatible with the manufacturer's specified operating conditions.

What is the SN75124N?
The SN75124N is a Texas Instruments triple differential line receiver designed for IBM System 360 input/output interfaces and standard TTL-compatible systems. According to the Texas Instruments datasheet, the device provides three receiver channels, operates from a single 5 V supply, and includes built-in input-threshold hysteresis. It is packaged in a 16-pin PDIP for through-hole industrial and legacy electronic assemblies.
What are the key specifications of SN75124N that engineers should know?
The SN75124N combines three differential receiver channels, a single 5 V supply, TTL-compatible operation, and built-in input-threshold hysteresis in a 16-pin PDIP package. According to the Texas Instruments datasheet, it was designed around IBM System 360 input/output interface requirements. Its operating range is listed as 0 °C to 70 °C, making it primarily suitable for commercial-temperature legacy and industrial equipment rather than extended-temperature systems.
Where can I download the SN75124N datasheet PDF?
The official SN75124N datasheet PDF is available from Texas Instruments at https://www.ti.com/lit/ds/symlink/sn75124.pdf. The manufacturer document describes the triple line receiver, its IBM System 360 interface application, TTL compatibility, single 5 V operation, input hysteresis, electrical characteristics, and package information. Use this document as the controlling reference for pin functions, input thresholds, output levels, and application circuitry.
Where can I find the SN75124N pinout?
The SN75124N pinout is shown in the Texas Instruments SN75124 datasheet at https://www.ti.com/lit/ds/symlink/sn75124.pdf. The device uses a 16-pin PDIP package, and its pin configuration includes three differential receiver channels, power connections, ground, and enable or control functions as documented by the manufacturer. Assign PCB nets from the datasheet pin-description table rather than inferring connections from a generic line-receiver symbol.
Is SN75124N compatible with TTL logic?
Yes, the SN75124N is compatible with standard TTL logic and supply voltage levels. According to the Texas Instruments SN75124 datasheet, the receiver is designed for IBM System 360 input/output interfaces while also supporting conventional TTL systems. Its three channels convert received differential signals into digital receiver outputs, while built-in threshold hysteresis helps reject small disturbances near the logic transition region.
What is the supply voltage of SN75124N?
The SN75124N operates from a single 5 V supply. According to the Texas Instruments datasheet, the device is compatible with standard TTL logic and supply voltage levels. When placing it in a design, confirm the input and output thresholds, output loading, and system power tolerances against the manufacturer's electrical-characteristics table before treating the nominal 5 V rail as sufficient for every application.
Why does the SN75124N use input-threshold hysteresis?
The SN75124N uses built-in input-threshold hysteresis to reduce sensitivity to small voltage disturbances around a logic transition. The Texas Instruments datasheet identifies this feature as part of the receiver's operating characteristics. Hysteresis creates separate lower and upper transition regions, helping the receiver maintain its previous output when a noisy differential signal passes near the threshold.
Is SN75124N suitable for IBM System 360 equipment?
Yes, the SN75124N is specifically suitable for IBM System 360 input/output interface applications. According to the Texas Instruments datasheet, the triple receiver was designed to meet the relevant input/output interface specifications and is also compatible with standard TTL logic and supply voltage levels. System integration still requires checking signal amplitude, timing, loading, and protection against the actual interface implementation.
What can replace the SN75124N?
The SN75124N should be replaced only by a part with the same 16-pin PDIP footprint, identical receiver-channel pinout, compatible 5 V and TTL electrical levels, and suitable differential-input behavior. The SN75174N is a related receiver family member, but it is not established here as a pin-to-pin replacement. Use the Request a Quote form on this page to identify a source for the original part or request a reviewed alternative.
What is the best cross-brand equivalent for SN75124N?
No cross-brand drop-in equivalent for the SN75124N has been established. A valid substitute must preserve all 16 pins, three receiver functions, 5 V operation, TTL-compatible thresholds, output polarity, and differential-input characteristics. Products described only as triple or quad line receivers may differ in channel count, enable architecture, input common-mode range, or pin assignment, so they require engineering review rather than automatic substitution.
SN75124N versus SN75174N: which receiver fits the design?
The SN75124N is a triple line receiver, while the SN75174N belongs to a different member of the TI receiver family and should not be assumed to be pin-compatible. The SN75124N targets IBM System 360 and TTL-compatible interfaces in a 16-pin PDIP package. Choose the SN75124N when its documented three-channel pinout and electrical characteristics match the existing PCB; otherwise, redesign around a verified equivalent rather than relying on family similarity.
When should I choose SN75124N over a similar line receiver?
Choose the SN75124N when the existing PCB expects a 16-pin PDIP triple differential receiver operating from 5 V with TTL-compatible logic levels. It is particularly appropriate for IBM System 360 or legacy TTL interfaces requiring built-in input hysteresis. Select a different receiver only after confirming footprint, channel count, pin functions, threshold behavior, enable requirements, output polarity, and propagation timing against the system requirements.
Is SN75124N suitable for industrial control systems?
The SN75124N can be suitable for commercial-temperature industrial control equipment that uses a compatible legacy differential interface. Its listed 0 °C to 70 °C operating range and 16-pin PDIP package support through-hole industrial assemblies, but system qualification must address temperature, noise, grounding, and protection requirements. The device should not be assumed suitable for extended-temperature, automotive, or safety-critical applications without separate qualification.
How should the SN75124N be protected against external cable noise?
Protect externally accessible SN75124N connections according to the interface's actual electrical limits and system grounding plan. The receiver's built-in threshold hysteresis improves noise immunity, but it does not replace correct termination, common-mode control, surge protection, or isolation. Check the datasheet for allowed input voltage and common-mode conditions, and place any required protection where it will not distort valid receiver transitions.
Where to buy SN75124N online and what is its lead time?
Use the Request a Quote form on this page to request SN75124N availability, current lead time, minimum order quantity, and shipment details. The component is a 16-pin PDIP triple line receiver from Texas Instruments, and current supply conditions should be confirmed for the exact orderable MPN. This page does not publish a static price or promise same-day shipment because commercial terms can change with inventory and order volume.

داده‌های مرجع مهندسی برای SN75124N — مقایسه، راهنمای طراحی و اطلاعات انطباق.

راهنمای انتخاب

Choose the SN75124N when repairing or reproducing an established 16-pin PDIP interface that requires three differential receiver channels, a single 5 V supply, TTL-compatible outputs, and IBM System 360-compatible behavior. Its built-in input hysteresis is useful on noisy legacy interconnects. Do not treat another line receiver as interchangeable without checking every pin, threshold, polarity, enable state, common-mode limit, and timing parameter. The related SN75174N may be useful for comparison, but it is not established here as a pin-to-pin replacement. For a new design, first determine whether a modern powered bus transceiver or differential logic device would provide safer signal conditioning, lower power, smaller size, or broader operating-temperature support.

مقایسه با جایگزین‌ها

پارامتر این محصول
Product Type Triple differential line receiver
Brand Texas Instruments
Package 16-pin PDIP
Receiver Channel Count 3 channels
Supply Voltage 5 V
Logic Compatibility TTL compatible
Input Threshold Hysteresis Built in
Interface Target IBM System 360 input/output interface
Operating Temperature Range 0 °C to 70 °C
Mounting Type Through-hole

تفاوت‌های کلیدی

  • Purpose-built IBM System 360 receive interface (در مقابلGeneric triple line receivers)
  • Three receiver functions in one package (در مقابلSingle-channel receiver implementations)
  • Integrated input-threshold hysteresis (در مقابلReceivers without threshold hysteresis)
  • Straightforward legacy-system integration (در مقابلModern multi-voltage interface devices)

یادداشت‌های طراحی

Place the SN75124N in the same logic-ground domain as the receiver's downstream TTL circuitry. Keep the package, input traces, and decoupling connections compact, and route differential inputs away from switching nodes and unrelated clock or relay-control lines. Because this is a 16-pin PDIP device, check drilling, lead spacing, socket clearance, and component height during PCB layout rather than substituting a surface-mount footprint.

Validate the complete receiver path with the intended source impedance, cable length, connector, and termination arrangement. Built-in input hysteresis improves rejection of small disturbances, but it does not compensate for excessive loading, reflections, or out-of-range common-mode voltage. Confirm the manufacturer's input threshold, allowed voltage range, output loading, and timing limits before changing the existing interface network.

Do not substitute a receiver merely because it is labeled a triple or differential line receiver. Pin compatibility requires matching channel assignments, enable and ground connections, differential input polarity, 5 V supply expectations, and TTL output levels. Also verify how unused channels are handled and whether enable pins must be tied to defined logic states, as incorrect connection can prevent the receiver from operating reliably.

Use a stable 5 V supply and place suitable bypass capacitance close to the device's supply and ground pins. The SN75124N is a digital interface IC rather than a power-conversion component, so its principal supply concern is clean rail delivery and correct grounding. Size and place bypass capacitance according to the manufacturer's application guidance and the switching characteristics of surrounding equipment rather than treating the line receiver as a local regulator.

اطلاعات انطباق

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
بدون سرب
Unknown
بدون هالوژن
Unknown
مواد معدنی درگیری
Unknown

The manufacturer datasheet identifies legacy IBM System 360 and TTL-compatible applications. Explicit RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations were not established, so those fields remain unknown.

تاریخ تأیید داده‌ها: 2026-11-09 — داده‌ها توسط تیم مهندسی قطعات XAIPART تأیید و گردآوری شده است

جستجوهای مرتبط

SN75124N datasheet SN75124N datasheet pdf SN75124N pinout SN75124N specifications SN75124N 16-PDIP SN75124N TTL receiver SN75124N equivalent SN75124N replacement SN75124N cross reference SN75124N vs SN75174N Texas Instruments SN75124N SN75124N price SN75124N stock SN75124N IBM System 360 interface

قطعات و اصطلاحات مرتبط

Texas Instruments SN75124N SN75124 SN75174N triple differential line receiver differential receiver line receiver interface IC bus transceiver TTL IBM System 360 input-threshold hysteresis single 5 V supply 16-pin PDIP through-hole package commercial-temperature device logic interface signal conditioning common-mode voltage digital logic
استعلام قیمت سریع RFQ
جزئیات کامل را پر کنید — تیم فروش ما ظرف 24 ساعت پاسخ خواهد داد
شماره قطعه سازنده بسته‌بندی QTY قیمت هدف قیمت کل
✓
استعلام قیمت ارسال شد!

ظرف ۲۴ ساعت به ایمیل شما پاسخ خواهیم داد

1
درخواست قیمت ارسال شد
2
استعلام دریافت شد
3
سفارش ثبت شد
4
پرداخت
5
ارسال شد
6
تحویل داده شد
مشاهده جزئیات RFQ