SN75124N - Triple Line Receiver | Texas Instruments
MPN: SN75124N ✓ 啟用中SN75124N 概覽
A line receiver is an interface IC that restores valid logic levels from signals degraded by distance, capacitance, crosstalk, or transmission-line reflections. Within the interface hierarchy, the SN75124N belongs to the receiver family of TTL-compatible logic and bus-interface components, where it sits between a noisy physical communication link and digital processing logic. Differential reception is especially useful when a system must distinguish a valid transition from common-mode noise.
The principal benefits of the SN75124N are its three-channel architecture, single 5 V operation, TTL compatibility, and integrated input hysteresis. Combining three receivers in one 16-pin PDIP reduces component count and board area in equipment requiring several independent communication channels. The hysteresis helps a receiver ignore small voltage disturbances near its switching threshold, improving dependable operation in systems with noisy interconnects.
According to the Texas Instruments datasheet, the SN75124 was specifically designed to meet the input/output interface specifications for IBM System 360. It is also compatible with standard TTL logic and supply voltage levels. These details position the device as a legacy-compatible interface solution rather than a modern multi-gigabit transceiver, making it most appropriate for established TTL or IBM System 360 equipment.
Typical applications include IBM-compatible computer peripherals, industrial control interfaces, legacy storage equipment, telecommunications equipment, and embedded systems that receive differential signals with TTL-level outputs. It can also be evaluated in instrumentation or test systems where a short cable or backplane connection introduces noise but remains within the receiver's supported signal and supply conditions.
The primary design consideration is verifying that the connected signal amplitude, common-mode range, bus loading, and system thresholds satisfy the SN75124N requirements. Designers should also account for TTL input and output levels, supply decoupling, unused receiver channels, and any protection needed for externally accessible connectors. The 16-pin PDIP format favors through-hole assembly and repairability rather than compact surface-mount production.
This page combines the manufacturer interface description, package information, application guidance, verified-equivalent checks, and practical selection considerations. It also distinguishes a genuine pin-to-pin replacement from a merely similar line receiver, helping engineers avoid substitutions that change channel count, pin assignment, logic polarity, or electrical requirements.
直接替換替代品,適用於 SN75124N — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: SN75124N (相同外形與佔位) — 差異在於 Logic Compatibility, Output State, Product Type.
此產品無可直接替換的替代品。
申請替代品SN75124N 規格
| Product Type | Triple differential line receiver |
| Receiver Channel Count | 3 channels |
| 供應電壓 | 5 V |
| Logic Compatibility | TTL compatible |
| Input Threshold Hysteresis | Built in |
| Interface Standard | IBM System 360 input/output interface |
| 封裝 | 16-pin PDIP |
| 安裝類型 | Through-hole |
| 工作溫度範圍 | 0 °C to 70 °C |
| Output State | 0 or 3 receiver output states |
SN75124N 16-pin pdip 腳位配置指南
SN75124N(16-pin pdip 封裝)的腳位配置。 腳位編號、功能與連接圖定義於製造商資料手冊中。請參閱該手冊以取得確切的封裝尺寸與焊接指引。
無詳細腳位定義資料: SN75124N.
請參閱 資料表 以查看完整腳位配置。
典型應用
SN75124N 適用於 6 應用s: IBM System 360 Peripheral Interfaces, Legacy TTL Bus Reception, Industrial Control Signal Conditioning, Telecommunications Equipment Interfaces, Legacy Storage and Peripheral Equipment, Laboratory and Test Equipment.
IBM System 360 Peripheral Interfaces
The SN75124N fits legacy IBM System 360 input/output interfaces because Texas Instruments designed the triple receiver to meet their interface requirements. Its three differential channels provide independent receive paths in one 16-pin PDIP device, reducing the number of separate receiver packages required on an interface card. The 5 V supply and TTL-compatible levels simplify connection to established digital logic, while built-in input-threshold hysteresis helps suppress small disturbances on affected lines. Before implementation, verify the actual connector, signal levels, termination, grounding, and timing against the system and manufacturer electrical-characteristics tables.
推薦
Legacy TTL Bus Reception
The SN75124N is useful in legacy TTL bus receivers where noisy interconnect lines must produce stable standard logic outputs. Each of its three receiver channels can help reject disturbances near the switching threshold, and the integrated design reduces the board area required for three discrete receiver functions. The single 5 V supply aligns with established TTL system rails, while the through-hole PDIP package supports repairable and prototype-oriented assemblies. Engineers should confirm signal amplitude, common-mode limits, output loading, and propagation timing before replacing an existing receiver or extending a cable connection.
推薦
Industrial Control Signal Conditioning
The SN75124N can support commercial-temperature industrial equipment that receives noisy differential signals from control or peripheral subsystems. Three receiver channels in one 16-pin PDIP package provide a practical way to condition multiple logic connections, while the built-in hysteresis improves stability when input levels cross the threshold slowly or contain low-level noise. The design must still validate the industrial environment: the listed 0 °C to 70 °C range may be insufficient, and external surge, ESD, and common-mode protection may be required according to the interface and enclosure requirements.
推薦
Telecommunications Equipment Interfaces
The SN75124N is applicable to telecommunications and data-processing equipment that uses TTL-compatible differential receive channels. Its three-channel arrangement supports several incoming communications lines from one package, and the 5 V operating supply simplifies integration into conventional logic boards. Input hysteresis can improve tolerance of small disturbances introduced by internal wiring, backplanes, or imperfect connectors. For field-connected or long-distance interfaces, however, the design must include suitable protection and verify that cable transients remain within the receiver's permitted input and common-mode conditions.
推薦
Legacy Storage and Peripheral Equipment
The SN75124N can be used as the receive element in legacy storage peripherals, printer interfaces, and computer support equipment that relies on IBM-style or TTL-compatible signaling. Three independent receivers make the part suitable for multi-line command, status, or acknowledgment paths, while the PDIP footprint favors repairable through-hole circuit boards. System integration should focus on confirming channel assignment, logic polarity, receiver enable requirements, and timing. If the board also uses bidirectional bus functions, a transceiver such as MC74F243M may be needed alongside or instead of a receive-only device.
推薦
Laboratory and Test Equipment
The SN75124N is suitable for test and laboratory equipment that needs to recover digital information from a noisy differential link. Three receiver channels allow several instrument-control or status signals to share one package, and the built-in threshold hysteresis reduces susceptibility to small voltage fluctuations around the decision point. The 16-pin PDIP format is practical for breadboards, prototypes, and repair-oriented instruments. Before connecting equipment to external leads, engineers should establish grounding, add appropriate transient protection, and confirm that the signal amplitude and common-mode level remain compatible with the manufacturer's specified operating conditions.
推薦
推薦產品摘要
工程參考資料,適用於 SN75124N — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 |
|---|---|
| Product Type | Triple differential line receiver |
| Brand | Texas Instruments |
| Package | 16-pin PDIP |
| Receiver Channel Count | 3 channels |
| Supply Voltage | 5 V |
| Logic Compatibility | TTL compatible |
| Input Threshold Hysteresis | Built in |
| Interface Target | IBM System 360 input/output interface |
| Operating Temperature Range | 0 °C to 70 °C |
| Mounting Type | Through-hole |
主要差異化特點
- Purpose-built IBM System 360 receive interface (對比Generic triple line receivers)
- Three receiver functions in one package (對比Single-channel receiver implementations)
- Integrated input-threshold hysteresis (對比Receivers without threshold hysteresis)
- Straightforward legacy-system integration (對比Modern multi-voltage interface devices)
設計說明
Place the SN75124N in the same logic-ground domain as the receiver's downstream TTL circuitry. Keep the package, input traces, and decoupling connections compact, and route differential inputs away from switching nodes and unrelated clock or relay-control lines. Because this is a 16-pin PDIP device, check drilling, lead spacing, socket clearance, and component height during PCB layout rather than substituting a surface-mount footprint.
Validate the complete receiver path with the intended source impedance, cable length, connector, and termination arrangement. Built-in input hysteresis improves rejection of small disturbances, but it does not compensate for excessive loading, reflections, or out-of-range common-mode voltage. Confirm the manufacturer's input threshold, allowed voltage range, output loading, and timing limits before changing the existing interface network.
Do not substitute a receiver merely because it is labeled a triple or differential line receiver. Pin compatibility requires matching channel assignments, enable and ground connections, differential input polarity, 5 V supply expectations, and TTL output levels. Also verify how unused channels are handled and whether enable pins must be tied to defined logic states, as incorrect connection can prevent the receiver from operating reliably.
Use a stable 5 V supply and place suitable bypass capacitance close to the device's supply and ground pins. The SN75124N is a digital interface IC rather than a power-conversion component, so its principal supply concern is clean rail delivery and correct grounding. Size and place bypass capacitance according to the manufacturer's application guidance and the switching characteristics of surrounding equipment rather than treating the line receiver as a local regulator.
合規資訊
The manufacturer datasheet identifies legacy IBM System 360 and TTL-compatible applications. Explicit RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations were not established, so those fields remain unknown.