SY89823LHG - 500 MHz 2:22 Clock Driver | Microchip Technology
MPN: SY89823LHG ✗ Akhir HayatSY89823LHG Ringkasan
A clock buffer belongs to the clock and timing IC category. It is a specialized digital semiconductor that redistributes or translates one or more incoming clock signals into multiple outputs. Clock drivers are used to increase fanout, isolate source and destination circuits, match clock-domain voltage levels, and preserve timing relationships across large or electrically demanding systems. The SY89823LHG combines distribution, multiplexing or translation, and differential signaling in one Precision Edge device.
The principal headline ratings are a maximum frequency of 500 MHz, two clock inputs, 22 outputs per input, and a 64-TQFP exposed-pad package. Its 1:22 fanout arrangement can reduce the number of separate distribution stages required in a complex backplane, processor, networking, or test-system clock tree. HSTL and LVPECL support are significant because they address high-speed logic-interface requirements where voltage compatibility, common-mode behavior, and edge quality directly affect reliable clock delivery.
The SY89823LHG belongs to the Precision Edge clock-buffer family and is described as a fanout buffer, multiplexer, translator, or distribution device. Its 2:22 ratio allows a compact clock-tree architecture, but implementation still requires correct input termination, controlled impedance routing, adequate return paths, and power-plane distribution. The exposed pad is an important thermal and electrical feature because it provides a direct path for heat removal from the die and can be bonded to a low-impedance ground plane under the device.
Typical applications include telecommunications and networking clock distribution, high-speed digital backplanes, processor and serializer clock trees, server platforms, FPGA fabric distribution, and instrumentation. These uses benefit from the device's high operating frequency and 22-way fanout, particularly where multiple loads need a locally regenerated clock rather than a long point-to-point clock route.
The principal design trade-off is lifecycle: the manufacturer datasheet listing identifies the SY89823LHG as obsolete. Existing equipment can still benefit from its established 500 MHz capability and 64-pin footprint, but engineers should verify pin assignments, supply requirements, output behavior, and available replacement options against the manufacturer datasheet before using it in a new design. This page also distinguishes documented functions from unspecified electrical details so that PCB and signal-integrity decisions are not based on guessed values.
Pilihan pengganti yang segera untuk SY89823LHG — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.
Tiada pilihan pengganti yang segera untuk produk ini.
Minta AlternatifSY89823LHG Spesifikasi
| Product Type | Clock fanout buffer, multiplexer, translator, and distributor |
| Maximum Frequency | 500 MHz |
| Number of Circuits | 1 circuit |
| Number of Inputs | 2 inputs |
| Input-to-Output Ratio | 2:22 |
| Output Fanout | 22 outputs per input |
| Differential Input | Yes |
| Differential Output | Yes |
| Input Logic Level | HSTL and LVPECL |
| Output Logic Level | HSTL |
| Series | Precision Edge |
| Kemasan | 64-pin TQFP with exposed pad |
| Jenis Pemasangan | Surface mount |
| Status Lingkungan Hidup | Obsolete |
Panduan Konfigurasi Pin SY89823LHG 64-pin tqfp with exposed pad
Konfigurasi pin untuk SY89823LHG (64-pin tqfp with exposed pad pakai). Penomeran pin, fungsi, dan garis bentuk koneksi ditakrifkan dalam dokumen pengeluar. Rujuk dokumen untuk kebentuk dan pedoman pengasman.
Tiada data garisan pin yang diperoleh untuk SY89823LHG.
Rujuk kepada lembaran data untuk konfigurasi pin penuh.
Aplikasi Biasa
SY89823LHG patut untuk 6 aplikasis: Telecommunications Clock Distribution, Processor and Serializer Clock Trees, FPGA Fabric Clock Distribution, High-Speed Digital Backplanes, Network Equipment Clocking, Test and Measurement Systems.
Telecommunications Clock Distribution
The SY89823LHG fits high-speed telecommunications equipment that must distribute a clock across several functional blocks from two input sources. Its 500 MHz maximum operating frequency, 2:22 input-to-output ratio, and differential inputs and outputs support compact clock-tree layouts where multiple loads would otherwise create long point-to-point routes. The HSTL output interface supports compatible digital logic, while LVPECL and HSTL input options give the system designer flexibility in clock-generation architecture. Because the device is obsolete, it is best suited to maintenance or replication of qualified equipment rather than unrestricted new platform development. PCB implementation should preserve controlled-impedance routing, adequate return paths, and the manufacturer-specified termination and loading conditions.
Disebarkan
Processor and Serializer Clock Trees
The SY89823LHG can serve as a local fanout stage in a processor, serializer, or transceiver clock tree when the design requires two clock sources and extensive distribution. A 22-way output ratio reduces the number of cascaded buffers required to reach widely separated loads, while the 500 MHz maximum frequency addresses demanding digital clock domains. Differential signaling improves noise immunity on longer routes and provides a suitable interface for systems designed around differential clocking. Exact supply, enable, and output timing details must be taken from the manufacturer datasheet. Engineers should also account for the obsolete lifecycle designation and verify availability before assigning this device to a new processor platform or safety-related production program.
Disebarkan
FPGA Fabric Clock Distribution
The SY89823LHG is applicable to FPGA systems that require multiple synchronized clock loads distributed from a central source. Its two inputs and 2:22 ratio can support flexible clock routing, while differential clock inputs and outputs help maintain signal integrity across controlled-impedance board traces. The 500 MHz maximum frequency makes the device relevant to high-speed fabric and serializing architectures, subject to the complete timing specification. Designers should compare source and destination loading, add the manufacturer-required termination, and maintain continuous reference planes beneath clock routes. Since the SY89823LHG is obsolete, an established FPGA design can use it for replication or repair, but a new FPGA card should normally begin with a currently supported clock-distribution option.
Disebarkan
High-Speed Digital Backplanes
The SY89823LHG's 22-output distribution capability and differential signaling make it relevant to high-speed digital backplanes requiring local fanout rather than a single long clock route. By placing the clock driver near the receiving circuitry, the design can shorten sensitive branches, reduce loading on the upstream source, and support multiple logic regions. Its documented 500 MHz maximum frequency establishes the top speed class, while HSTL output and HSTL or LVPECL input options provide interface compatibility with appropriate backplane logic. Practical deployment still requires careful simulation or measurement of skew, jitter, impedance, terminations, and return paths. The obsolete status should be included in lifecycle risk assessments for long-lived backplane equipment.
Disebarkan
Network Equipment Clocking
The SY89823LHG can be used in network equipment clocking sections where one or two reference clocks must feed many line cards, fabric blocks, or interface circuits. Its 2:22 ratio is especially useful when a board requires many branches from a small number of source clocks, and differential input and output paths support robust high-speed transfer over controlled-impedance routes. The 500 MHz rating covers demanding digital architectures, subject to the power-supply and load conditions in the manufacturer datasheet. Layout should minimize stub effects, maintain continuous return paths, and place termination according to the selected logic interface. For new network platforms, engineers should balance the convenience of this established part against its obsolete lifecycle and obtain a firm supply and traceability commitment.
Disebarkan
Test and Measurement Systems
The SY89823LHG can support test and measurement systems that distribute a common reference clock among multiple acquisition, synthesis, or trigger sections. The 500 MHz maximum frequency and 2:22 ratio allow a compact fanout architecture, while differential clock connections can reduce susceptibility to crosstalk and ground-bounce effects in densely populated instrumentation. HSTL and LVPECL input support permits connection to compatible source equipment, and HSTL outputs provide the stated output interface. Engineers should characterize output skew and jitter against the instrument's timing requirements and preserve controlled-impedance routing and proper grounding. Because the part is obsolete, it is most practical in established measurement platforms; new instrumentation should assess current clock-buffer families that provide equivalent distribution with active lifecycle support.
Disebarkan
Data referensi kejuruteraan untuk SY89823LHG — perbandingan, panduan rancangan, dan maklumat kesediaan
Panduan Pilihan
Catatan Desain
Route every differential clock pair as a controlled-impedance coupled structure with a continuous return path. Avoid long stubs and unnecessary layer transitions, and keep the clock driver close to the branch point when many loads are distributed. Use the manufacturer interface recommendations to determine where terminations belong; the 500 MHz rating does not by itself define a complete board-level termination scheme.
Treat the exposed pad as both a thermal path and a layout feature. Create a low-impedance connection from the pad to the appropriate ground plane and minimize thermal-via resistance while maintaining the required clearance around other nets. Validate the final junction-temperature margin against the actual clock activity and supply dissipation. Do not assume the exposed pad is electrically interchangeable with every package ground pin without checking the pin table.
Budget the clock distribution as a complete signal path rather than evaluating only the advertised maximum frequency. Include source impedance, receiver loading, termination, output skew, jitter, trace loss, and return-path discontinuities in simulation or measurement. The documented 2:22 fanout can simplify board topology, but each additional branch increases loading and reduces timing margin, so qualify the highest fanout configuration used in production.
Do not substitute a superficially similar 64-pin clock buffer unless every numbered pin, supply requirement, logic-level threshold, enable function, differential interface, and timing parameter has been checked. The SY89823LHG is obsolete, and footprint equivalence alone does not establish electrical drop-in compatibility. Record the exact manufacturer suffix, date code, condition, and traceability requirements with any maintenance or replication order.
Maklumat Kesediaan
The manufacturer datasheet excerpt confirms obsolete lifecycle status but does not state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status.