Microchip Technology

SY89823LHG - 500 MHz 2:22 Clock Driver | Microchip Technology

MPN: SY89823LHG ✗ اختتامِ زندگی
64-pin TQFP with exposed pad Package 500 MHz Speed
MOQ: 1 |

SY89823LHG جائزہ

The Microchip Technology SY89823LHG is a high-speed fanout buffer and clock distributor rated for operation up to 500 MHz, with two inputs, a 2:22 input-to-output ratio, and differential input and output capability. The device is packaged in a 64-pin TQFP with an exposed pad and uses HSTL and LVPECL signal formats. According to the manufacturer datasheet listing, the SY89823LHG is obsolete, so new designs should confirm lifecycle status and consider a supported current-generation alternative before committing a footprint.

A clock buffer belongs to the clock and timing IC category. It is a specialized digital semiconductor that redistributes or translates one or more incoming clock signals into multiple outputs. Clock drivers are used to increase fanout, isolate source and destination circuits, match clock-domain voltage levels, and preserve timing relationships across large or electrically demanding systems. The SY89823LHG combines distribution, multiplexing or translation, and differential signaling in one Precision Edge device.

The principal headline ratings are a maximum frequency of 500 MHz, two clock inputs, 22 outputs per input, and a 64-TQFP exposed-pad package. Its 1:22 fanout arrangement can reduce the number of separate distribution stages required in a complex backplane, processor, networking, or test-system clock tree. HSTL and LVPECL support are significant because they address high-speed logic-interface requirements where voltage compatibility, common-mode behavior, and edge quality directly affect reliable clock delivery.

The SY89823LHG belongs to the Precision Edge clock-buffer family and is described as a fanout buffer, multiplexer, translator, or distribution device. Its 2:22 ratio allows a compact clock-tree architecture, but implementation still requires correct input termination, controlled impedance routing, adequate return paths, and power-plane distribution. The exposed pad is an important thermal and electrical feature because it provides a direct path for heat removal from the die and can be bonded to a low-impedance ground plane under the device.

Typical applications include telecommunications and networking clock distribution, high-speed digital backplanes, processor and serializer clock trees, server platforms, FPGA fabric distribution, and instrumentation. These uses benefit from the device's high operating frequency and 22-way fanout, particularly where multiple loads need a locally regenerated clock rather than a long point-to-point clock route.

The principal design trade-off is lifecycle: the manufacturer datasheet listing identifies the SY89823LHG as obsolete. Existing equipment can still benefit from its established 500 MHz capability and 64-pin footprint, but engineers should verify pin assignments, supply requirements, output behavior, and available replacement options against the manufacturer datasheet before using it in a new design. This page also distinguishes documented functions from unspecified electrical details so that PCB and signal-integrity decisions are not based on guessed values.

کے لیے ڈراپ اِن متبادل SY89823LHG — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔

اس پروڈکٹ کے لیے کوئی ڈراپ اِن متبادل دستیاب نہیں۔

متبادل کی درخواست کریں

SY89823LHG تفصیلات

Product Type Clock fanout buffer, multiplexer, translator, and distributor
Maximum Frequency 500 MHz
Number of Circuits 1 circuit
Number of Inputs 2 inputs
Input-to-Output Ratio 2:22
Output Fanout 22 outputs per input
Differential Input Yes
Differential Output Yes
Input Logic Level HSTL and LVPECL
Output Logic Level HSTL
Series Precision Edge
پیکیج 64-pin TQFP with exposed pad
ماؤنٹنگ ٹائپ Surface mount
لائف سائیکل کی حالت Obsolete

SY89823LHG 64-pin tqfp with exposed pad پن کنفیگریشن گائیڈ

SY89823LHG (64-pin tqfp with exposed pad پیکیج) کے لیے پن کنفیگریشن۔ پن نمبرنگ، فنکشنز اور کنکشن ڈایاگرامز مینوفیکچرر کے ڈیٹا شیٹ میں بیان کیے گئے ہیں۔ درست فٹ پرنٹ اور سولڈرنگ رہنما ہدایات کے لیے اسی سے رجوع کریں۔

SY89823LHG کے لیے 64-pin tqfp with exposed pad پیکیج پن آؤٹ ڈایاگرام

کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں SY89823LHG.

رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔

عام استعمالات

SY89823LHG کے لیے موزوں ہے 6 ایپلیکیشنs: Telecommunications Clock Distribution, Processor and Serializer Clock Trees, FPGA Fabric Clock Distribution, High-Speed Digital Backplanes, Network Equipment Clocking, Test and Measurement Systems.

🌐

Telecommunications Clock Distribution

The SY89823LHG fits high-speed telecommunications equipment that must distribute a clock across several functional blocks from two input sources. Its 500 MHz maximum operating frequency, 2:22 input-to-output ratio, and differential inputs and outputs support compact clock-tree layouts where multiple loads would otherwise create long point-to-point routes. The HSTL output interface supports compatible digital logic, while LVPECL and HSTL input options give the system designer flexibility in clock-generation architecture. Because the device is obsolete, it is best suited to maintenance or replication of qualified equipment rather than unrestricted new platform development. PCB implementation should preserve controlled-impedance routing, adequate return paths, and the manufacturer-specified termination and loading conditions.

🖥️

Processor and Serializer Clock Trees

The SY89823LHG can serve as a local fanout stage in a processor, serializer, or transceiver clock tree when the design requires two clock sources and extensive distribution. A 22-way output ratio reduces the number of cascaded buffers required to reach widely separated loads, while the 500 MHz maximum frequency addresses demanding digital clock domains. Differential signaling improves noise immunity on longer routes and provides a suitable interface for systems designed around differential clocking. Exact supply, enable, and output timing details must be taken from the manufacturer datasheet. Engineers should also account for the obsolete lifecycle designation and verify availability before assigning this device to a new processor platform or safety-related production program.

🔧

FPGA Fabric Clock Distribution

The SY89823LHG is applicable to FPGA systems that require multiple synchronized clock loads distributed from a central source. Its two inputs and 2:22 ratio can support flexible clock routing, while differential clock inputs and outputs help maintain signal integrity across controlled-impedance board traces. The 500 MHz maximum frequency makes the device relevant to high-speed fabric and serializing architectures, subject to the complete timing specification. Designers should compare source and destination loading, add the manufacturer-required termination, and maintain continuous reference planes beneath clock routes. Since the SY89823LHG is obsolete, an established FPGA design can use it for replication or repair, but a new FPGA card should normally begin with a currently supported clock-distribution option.

🌐

High-Speed Digital Backplanes

The SY89823LHG's 22-output distribution capability and differential signaling make it relevant to high-speed digital backplanes requiring local fanout rather than a single long clock route. By placing the clock driver near the receiving circuitry, the design can shorten sensitive branches, reduce loading on the upstream source, and support multiple logic regions. Its documented 500 MHz maximum frequency establishes the top speed class, while HSTL output and HSTL or LVPECL input options provide interface compatibility with appropriate backplane logic. Practical deployment still requires careful simulation or measurement of skew, jitter, impedance, terminations, and return paths. The obsolete status should be included in lifecycle risk assessments for long-lived backplane equipment.

🌐

Network Equipment Clocking

The SY89823LHG can be used in network equipment clocking sections where one or two reference clocks must feed many line cards, fabric blocks, or interface circuits. Its 2:22 ratio is especially useful when a board requires many branches from a small number of source clocks, and differential input and output paths support robust high-speed transfer over controlled-impedance routes. The 500 MHz rating covers demanding digital architectures, subject to the power-supply and load conditions in the manufacturer datasheet. Layout should minimize stub effects, maintain continuous return paths, and place termination according to the selected logic interface. For new network platforms, engineers should balance the convenience of this established part against its obsolete lifecycle and obtain a firm supply and traceability commitment.

🔧

Test and Measurement Systems

The SY89823LHG can support test and measurement systems that distribute a common reference clock among multiple acquisition, synthesis, or trigger sections. The 500 MHz maximum frequency and 2:22 ratio allow a compact fanout architecture, while differential clock connections can reduce susceptibility to crosstalk and ground-bounce effects in densely populated instrumentation. HSTL and LVPECL input support permits connection to compatible source equipment, and HSTL outputs provide the stated output interface. Engineers should characterize output skew and jitter against the instrument's timing requirements and preserve controlled-impedance routing and proper grounding. Because the part is obsolete, it is most practical in established measurement platforms; new instrumentation should assess current clock-buffer families that provide equivalent distribution with active lifecycle support.

What is the SY89823LHG?
The SY89823LHG is a Microchip Technology Precision Edge clock fanout buffer and distribution IC with a maximum operating frequency of 500 MHz. According to the manufacturer datasheet, it has two inputs, a 2:22 input-to-output ratio, differential input and output capability, HSTL and LVPECL input support, and HSTL outputs. It is housed in a 64-pin TQFP with an exposed pad.
What are the key specifications of SY89823LHG?
The key SY89823LHG specifications are a 500 MHz maximum frequency, two clock inputs, 22 outputs per input, differential inputs and outputs, and HSTL outputs with HSTL or LVPECL input support. The manufacturer datasheet identifies the device as one clock circuit in a Precision Edge series and specifies a 64-pin TQFP package with an exposed pad.
How many outputs does the SY89823LHG provide?
The SY89823LHG provides a 2:22 input-to-output ratio, meaning two inputs feed a 22-way clock distribution arrangement. According to the manufacturer datasheet, its differential input and output capability supports high-speed clock routing while the HSTL output interface accommodates compatible downstream logic. Exact output numbering and enable functions require the pin-description table.
What clock frequencies does SY89823LHG support?
The SY89823LHG supports clock operation up to 500 MHz. This maximum-frequency figure comes from the manufacturer datasheet and is the principal headline speed rating for the device. Actual usable frequency can depend on input logic level, output loading, supply voltage, trace topology, termination, and the timing margin of the connected receiver.
Is the SY89823LHG still active?
No. The manufacturer datasheet listing identifies the SY89823LHG as obsolete. Existing systems may require it for maintenance or replication, but engineers should treat the obsolete designation as a sourcing risk and evaluate a currently supported clock-buffer product before beginning a new production design.
Where can I download the SY89823LHG datasheet PDF?
The SY89823LHG datasheet PDF is linked from this page at the SY89823LHG document address. The document describes the device as a 500 MHz clock buffer with two inputs, a 2:22 ratio, differential input and output capability, HSTL and LVPECL input formats, and an HSTL output. Use the manufacturer pin table and electrical characteristics for implementation details.
Where can I find the SY89823LHG pinout?
The SY89823LHG pinout should be taken from the numbered pin-description table in the manufacturer datasheet because the package contains 64 TQFP pins plus an exposed thermal pad. The pinout for this page is withheld rather than reconstructed because the exact signal assignment for every numbered pin was not established. Do not infer pin functions from the 2:22 ratio alone.
Where can I buy SY89823LHG online?
Use the Request a Quote form on this page to request SY89823LHG availability, current lead time, and order details for the obsolete part. Because lifecycle status can affect stock and traceability, include the target quantity and required packaging information in the request. A quotation response should confirm the exact SY89823LHG suffix and any condition or traceability requirements.
What is the price of SY89823LHG?
Current SY89823LHG pricing should be obtained through the Request a Quote form on this page. No fixed price is displayed because obsolete semiconductor pricing can vary with quantity, condition, traceability, and remaining inventory. Include the required order quantity and acceptance of the exact 64-pin TQFP exposed-pad package in your request.
What is the lead time for SY89823LHG?
The current lead time for SY89823LHG must be confirmed through the Request a Quote form on this page. The manufacturer datasheet identifies the device as obsolete, so scheduled production lead time should not be inferred from its original product status. The quotation should confirm stock, factory lead time, minimum order quantity, and whether any units are sourced from remaining inventory.
Is SY89823LHG in stock?
SY89823LHG stock status should be checked through the Request a Quote form on this page. The device is marked obsolete in the manufacturer datasheet, which means inventory cannot be assumed to be replenishable. Request a written confirmation of on-hand quantity, date code, packaging, traceability, and delivery schedule before placing the order.
What is the best drop-in replacement for SY89823LHG?
No drop-in replacement can be confirmed from the available cross-reference records for the obsolete SY89823LHG. A valid replacement must match the 64-pin TQFP exposed-pad footprint, pin assignments, 500 MHz class, 2:22 distribution, differential I/O, and supported logic levels. Use the Request a Quote form and specify that lifecycle and pin compatibility must be verified before substitution.
Can a Microchip clock buffer replace the SY89823LHG?
A Microchip clock buffer can replace the SY89823LHG only if its exact package, pinout, supply voltage, logic levels, differential interface, and timing characteristics match the original design. The available search records do not establish a pin-to-pin alternative, so no candidate is presented as a drop-in replacement. Use the manufacturer cross-reference and datasheet comparison to validate any proposed substitute.
When should I choose SY89823LHG instead of a newer clock buffer?
Choose the SY89823LHG primarily when repairing or replicating an existing 64-pin TQFP design whose original schematic, layout, and qualification records specifically identify that device. Its documented 500 MHz rating, 2:22 ratio, differential interfaces, and HSTL/LVPECL support can simplify maintenance. For a new design with uncertain lifecycle, select a currently supported clock buffer instead.
Is SY89823LHG suitable for a high-speed backplane clock tree?
Yes, the SY89823LHG can suit a high-speed backplane clock tree when its documented 2:22 fanout and 500 MHz maximum frequency match the system requirements. Differential inputs and outputs support high-speed distribution, while HSTL outputs target compatible logic. Signal-integrity performance still depends on controlled impedance, termination, return paths, jitter budget, and the data sheet's output-loading conditions.
What is a Microchip equivalent for SY89823LHG?
No specific Microchip equivalent is established by the available cross-reference records for the SY89823LHG. An equivalent must preserve the 64-pin TQFP exposed-pad footprint, numbered pin assignments, 500 MHz operating class, 2:22 fanout, and differential HSTL/LVPECL behavior. Submit the exact requirements through the Request a Quote form so lifecycle and drop-in compatibility can be confirmed.

کے لیے انجینئرنگ ریفرنس ڈیٹا SY89823LHG — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔

انتخاب کی گائیڈ

Choose the SY89823LHG when maintaining or replicating a proven 500 MHz clock-distribution design that specifically requires its 2:22 fanout, differential inputs and outputs, HSTL/LVPECL interface behavior, and 64-pin TQFP exposed-pad footprint. It is particularly useful when changing the logic level of the design or redistributing clocks to many loads would create unnecessary board-routing complexity. Because the device is obsolete, do not select it for an unrestricted new design. If an existing board can tolerate a smaller fanout, a different logic family, or a redesigned clock tree, a currently supported device may reduce procurement and qualification risk. No pin-to-pin replacement is asserted because the cross-reference records did not establish a candidate with the same package, pinout, 500 MHz class, and differential interface. A replacement must therefore be selected through a full manufacturer-datasheet comparison rather than by package name or clock-buffer function alone.

ڈیزائن نوٹس

Route every differential clock pair as a controlled-impedance coupled structure with a continuous return path. Avoid long stubs and unnecessary layer transitions, and keep the clock driver close to the branch point when many loads are distributed. Use the manufacturer interface recommendations to determine where terminations belong; the 500 MHz rating does not by itself define a complete board-level termination scheme.

Treat the exposed pad as both a thermal path and a layout feature. Create a low-impedance connection from the pad to the appropriate ground plane and minimize thermal-via resistance while maintaining the required clearance around other nets. Validate the final junction-temperature margin against the actual clock activity and supply dissipation. Do not assume the exposed pad is electrically interchangeable with every package ground pin without checking the pin table.

Budget the clock distribution as a complete signal path rather than evaluating only the advertised maximum frequency. Include source impedance, receiver loading, termination, output skew, jitter, trace loss, and return-path discontinuities in simulation or measurement. The documented 2:22 fanout can simplify board topology, but each additional branch increases loading and reduces timing margin, so qualify the highest fanout configuration used in production.

Do not substitute a superficially similar 64-pin clock buffer unless every numbered pin, supply requirement, logic-level threshold, enable function, differential interface, and timing parameter has been checked. The SY89823LHG is obsolete, and footprint equivalence alone does not establish electrical drop-in compatibility. Record the exact manufacturer suffix, date code, condition, and traceability requirements with any maintenance or replication order.

تعمیل کی معلومات

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
لیڈ فری
Unknown
ہیلوجن فری
Unknown
کنفلیکٹ منرلز
Unknown

The manufacturer datasheet excerpt confirms obsolete lifecycle status but does not state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status.

ڈیٹا کی تصدیق کی تاریخ: 2026-11-10 — ڈیٹا XAIPART کی کمپوننٹ انجینئرنگ ٹیم کے ذریعے تصدیق شدہ اور ترتیب شدہ

متعلقہ تلاشیں

SY89823LHG datasheet SY89823LHG datasheet pdf SY89823LHG pinout SY89823LHG equivalent SY89823LHG replacement SY89823LHG cross reference SY89823LHG 500 MHz clock buffer SY89823LHG 64 TQFP SY89823LHG HSTL LVPECL SY89823LHG price SY89823LHG stock Microchip Technology SY89823LHG

متعلقہ اجزاء اور اصطلاحات

Microchip Technology SY89823LHG Precision Edge clock buffer clock driver clock distributor fanout buffer multiplexer translator clock and timing IC semiconductor 500 MHz 2:22 input-to-output ratio differential clock I/O HSTL LVPECL 64-pin TQFP exposed pad surface-mount package clock tree network equipment FPGA clock distribution high-speed backplane signal integrity output skew clock jitter
فوری کوٹ RFQ
مکمل تفصیلات بھریں — ہماری سیلز ٹیم 24 گھنٹوں میں جواب دے گی
پارٹ نمبر مینوفیکچرر پیکج QTY ہدف قیمت کل رقم
✓
کوٹ جمع ہو گیا!

ہم 24 گھنٹوں کے اندر آپ کے ای میل کا جواب دیں گے

1
RFQ جمع ہو گیا
2
کوٹ موصول ہو گیا
3
آرڈر دے دیا گیا
4
ادائیگی
5
بھیج دیا گیا
6
ڈیلیور شدہ
RFQ تفصیلات دیکھیں