Texas Instruments

THS4222DGN - Dual High-Speed Rail-to-Rail Op Amp | Texas Instruments

MPN: THS4222DGN ✓ Aktif
3 V to 15 V Vdss 14 mA Id HVSSOP-8 (DGN) Package
MOQ: 1 |

THS4222DGN Ringkasan

Texas Instruments THS4222DGN is a dual-channel, voltage-feedback operational amplifier designed for low-voltage, high-output-swing, low-distortion signal paths. It operates from a single 3 V supply up to a single 15 V supply, consumes 14 mA of quiescent current, and provides rail-to-rail output operation in an 8-pin HVSSOP package. The DGN package is specified for operation from -40 °C to +85 °C.

A high-speed operational amplifier is a voltage-feedback amplifier optimized for rapid signal propagation, wide bandwidth, accurate slew behavior, and low output distortion. These characteristics place the device within the broader hierarchy of analog amplifiers, operational amplifier ICs, and power-management-dependent signal-chain components. The THS4222 family is particularly suited to applications requiring high output swing and low distortion while operating from low-voltage single supplies.

The THS4222DGN provides two amplifier channels in one package, reducing board area compared with separate single-channel devices. Its rail-to-rail output stage is intended to maximize usable signal range near the supply rails, while voltage-feedback architecture supports precise closed-loop gain configurations. The 14 mA quiescent-current specification provides a defined baseline for power budgeting when the amplifier operates with its output quiescent and feedback network.

The manufacturer identifies data-converter drive, video switching, and other low-distortion applications as primary use cases. Its 3 V to 15 V operating range supports low-voltage portable systems, industrial interface circuits, instrumentation, video signal conditioning, and communications equipment. Two channels can be used for differential signal conditioning, dual-ended filtering, active balancing, or independent analog paths when board space is constrained.

A key implementation consideration is supply decoupling. High-frequency operation requires short, low-inductance connections from the power pins to ground-plane bypass capacitance. Feedback components should also be placed close to the relevant input and output pins to minimize parasitic inductance and preserve the intended high-speed response. Input and output signal paths should be kept short and away from sources of switching noise.

For design decisions involving the THS4222DGN, engineers should compare bandwidth, slew rate, output-current capability, noise, distortion, and operating-range details against application requirements. This page combines the manufacturer ordering information, package details, functional positioning, sourcing workflow, and verified replacement information to support faster component selection and PCB planning.

Pilihan pengganti yang segera untuk THS4222DGN — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.

THS4222DGNR

✅ Masuk Drop-In
📦 HVSSOP-8 (DGN)
Same 2-channel THS4222 configuration and 8-pin DGN footprint; ordering format changes from tube to tape-and-reel, with 0% difference in confirmed channel count and pin count.

📋 Alternatif rujukan (tidak dalam katalog)

THS4042IDGN

✅ Masuk Drop-In
📦 HVSSOP-8 (DGN)
Same 2-channel voltage-feedback architecture and 8-pin HVSSOP package; amplifier-family performance emphasis differs, with 0% difference in confirmed channel count and pin count.

📋 Alternatif rujukan (tidak dalam katalog)

THS4041CDGNR

✅ Masuk Drop-In
📦 HVSSOP-8 (DGN)
Same manufacturer and 8-pin HVSSOP DGN footprint; the THS4041 family has a different amplifier specification set, while confirmed package-pin count differs by 0%.

📋 Alternatif rujukan (tidak dalam katalog)

THS4222DGN Penilaian maksimum & Ciri-ciri Elektrik

Amplifier Type Voltage-feedback operational amplifier
Number of Channels 2 channels
Supply Voltage Range 3 V to 15 V
Arus Dalam Tentera 14 mA
Jenis Output Rail-to-rail output
Low-Distortion Architecture High-output-swing, low-distortion
Package Type HVSSOP-8 (DGN)
Kiraan Pin 8 pins
Gambaran Suhu Operasi -40 °C to +85 °C
Jenis Pemasangan Surface mount

Panduan Konfigurasi Pin THS4222DGN hvssop-8 (dgn)

Konfigurasi pin untuk THS4222DGN (hvssop-8 (dgn) pakai). Komponen analog ini mempunyai pin masukan, keluaran, dan kuasa. Rujuk dokumen pengeluar untuk konfigurasi pengecualian, pemulihan, dan pin aktifkan. Ideal untuk pengawasan isyarat dan litar pengukur.

Garis bentuk pengecah pakai hvssop-8 (dgn) untuk THS4222DGN

Tiada data garisan pin yang diperoleh untuk THS4222DGN.

Rujuk kepada lembaran data untuk konfigurasi pin penuh.

Aplikasi Biasa

THS4222DGN patut untuk 6 aplikasis: Data-Converter Drive, Video Signal Switching, Low-Voltage Instrumentation, Communications Signal Conditioning, Precision Filter and Active Balance, Portable and Embedded Analog Front End.

⚡

Data-Converter Drive

The THS4222DGN fits high-speed data-converter input stages because Texas Instruments identifies the THS4222 family for low-distortion converter drive. Its two amplifier channels can provide single-ended drive, differential excitation, or complementary signal paths while operating from a 3 V to 15 V supply. The rail-to-rail output stage offers more usable range than a conventional amplifier whose output is restricted by a fixed saturation boundary. Engineering validation should compare converter input bandwidth, settling behavior, output swing, capacitive loading, and the THS4222 distortion characteristics over the required signal range.

📺

Video Signal Switching

The THS4222DGN is suitable for video-switching buffers because the family combines high output swing, rail-to-rail output operation, and low distortion in a dual-channel 8-pin HVSSOP package. The two channels can support active routing, gain adjustment, impedance conversion, or buffering around a video switch. Its single-supply range of 3 V to 15 V accommodates multiple portable and embedded video architectures. The design should still verify video bandwidth, output-current capability, channel-to-channel behavior, settling time, and distortion at the actual line amplitude and load.

🏭

Low-Voltage Instrumentation

The dual THS4222DGN can be used in low-voltage instrumentation where compactness, rail-to-rail output, and low distortion are important. Common roles include sensor conditioning, gain-stage implementation, active filtering, and buffered measurement outputs. The 14 mA quiescent-current figure provides a defined starting point for a portable power budget, while the 3 V minimum supply supports battery-powered instrumentation. Before finalizing the gain network, engineers should confirm small-signal bandwidth, offset and bias behavior, noise performance, common-mode range, and output drive against the sensor source impedance.

🌐

Communications Signal Conditioning

The THS4222DGN is applicable to communications signal-conditioning paths that require a high-speed voltage-feedback amplifier and ample output swing. Its dual-channel configuration can process two related signals or implement differential circuitry with fewer packages than discrete single amplifiers. Operating from one 3 V to 15 V rail simplifies compatibility with mixed-signal systems, although the amplifier remains dependent on clean power and careful layout. Check the device's complete bandwidth, slew rate, distortion, output-current capability, and noise specifications against modulation bandwidth, adjacent-channel rejection, and required signal amplitude.

🔧

Precision Filter and Active Balance

The two channels of the THS4222DGN can implement active filtering, impedance buffering, line-driver functions, or active balancing when the application requires low distortion and rail-to-rail output. Voltage feedback provides a conventional topology for precise resistor-defined gains and frequency responses. The DGN package helps preserve board density, while the 14 mA quiescent current supports moderate-power portable systems. Component selection should account for resistor tolerance, gain error, noise gain, output loading, and the stability behavior of the selected feedback network across the intended frequency range.

📱

Portable and Embedded Analog Front End

The THS4222DGN supports low-voltage embedded analog front ends where two high-speed channels are useful but a larger multi-amplifier package is undesirable. Its 3 V single-supply operation and 14 mA quiescent current suit battery-powered measurement, control, and communication modules. The rail-to-rail output improves utilization of the available signal range, while the 8-pin HVSSOP package supports compact layouts. Validate the full signal chain at the lowest expected supply voltage because the usable swing and performance limits can vary with supply voltage, load current, output frequency, and temperature.

Ringkasan Produk Disebarkan

THS4062IDR Texas Instruments Dipergunakan di: Data-Converter Drive, Video Signal Switching MCP3565R-E/SFX Microchip Technology Dipergunakan di: Data-Converter Drive MCP3562RT-E/ST Microchip Technology Dipergunakan di: Data-Converter Drive SI8641-A-B-F Digital-interface companion for video-control systems Dipergunakan di: Video Signal Switching MCP6001-I/SN Low-power operational amplifier for instrumentation Dipergunakan di: Low-Voltage Instrumentation, Portable and Embedded Analog Front End MCP6074-E/ST Microchip Technology Dipergunakan di: Low-Voltage Instrumentation MCP6041-E/MS Microchip Technology Dipergunakan di: Low-Voltage Instrumentation, Precision Filter and Active Balance ADF4351BKUP Clock and synthesizer signal-chain component Dipergunakan di: Communications Signal Conditioning ADF4360-6BCPZ RF synthesizer requiring disciplined low-distortion clocking Dipergunakan di: Communications Signal Conditioning MCP3561RT-E/ST Microchip Technology Dipergunakan di: Communications Signal Conditioning MCP6021-I/SN Low-noise amplifier for precision analog networks Dipergunakan di: Precision Filter and Active Balance MCP6072-E/MC Rail-to-rail amplifier for compact filtering stages Dipergunakan di: Precision Filter and Active Balance MCP604T-I/ST Microchip Technology Dipergunakan di: Portable and Embedded Analog Front End MCP6071-E/CH Compact amplifier for low-voltage analog systems Dipergunakan di: Portable and Embedded Analog Front End
What is the THS4222DGN?
The THS4222DGN is a dual-channel voltage-feedback operational amplifier with rail-to-rail output, low distortion, and high output swing. According to the Texas Instruments product page, it belongs to the THS4222 family and is intended for data-converter drive, video switching, and other low-distortion applications. The device operates from a single 3 V supply up to a single 15 V supply while consuming 14 mA of quiescent current.
What are the key specifications of THS4222DGN that engineers should know?
The THS4222DGN provides two voltage-feedback amplifier channels, rail-to-rail output, and a 3 V to 15 V single-supply operating range. Texas Instruments specifies 14 mA quiescent current, an 8-pin HVSSOP package with the DGN designator, and a -40 °C to +85 °C operating range. Its combination of high output swing, low distortion, and dual-channel integration supports data-converter drive, video switching, and low-voltage analog signal conditioning.
Where can I download the THS4222DGN datasheet PDF?
The THS4222DGN datasheet can be obtained from Texas Instruments through the official THS4222 product page or the linked manufacturer part-details page. A directly accessible PDF copy is also available through the DiGi-Electronics document link on this page. Use the manufacturer PDF as the controlling reference for pin assignments, electrical characteristics, recommended operating conditions, and application-circuit details.
Where can I find the THS4222DGN pinout?
The THS4222DGN pinout is documented in the Texas Instruments THS4222 family datasheet under the pin configuration and pin-description sections. This exact orderable device is an 8-pin HVSSOP with the DGN package designator. Because the complete pin-name sequence is not reproduced on the product landing page, use the datasheet pin table when assigning PCB nets and checking exposed-pad or thermal-pad requirements.
What is the supply voltage range of THS4222DGN?
The THS4222DGN operates from a single 3 V supply to a single 15 V supply. According to the Texas Instruments THS4222 family description, this wide single-supply range supports low-voltage designs while also accommodating higher-amplitude analog systems. The operating rails must remain within the limits detailed in the manufacturer datasheet, including any minimum supply requirements for the selected output-swing conditions.
What is the quiescent current of THS4222DGN?
The specified quiescent current for the THS4222 family is 14 mA. This is the baseline supply demand for the dual-amplifier device under its specified quiescent conditions. Actual board current also depends on output activity, load current, supply voltage, feedback configuration, and the operating mode of each amplifier channel. Texas Instruments states the 14 mA figure in its family-level product description.
Where can I buy THS4222DGN and check its current price?
Use the Request a Quote form on this page to request the current price, stock position, and lead time for THS4222DGN. The quote request can include the exact 8-pin HVSSOP DGN orderable MPN, required quantity, and target delivery schedule. Current commercial terms should be confirmed through that form because availability and pricing can change with market conditions and production schedules.
What is the lead time for THS4222DGN?
The current lead time for THS4222DGN should be obtained through the Request a Quote form on this page. Include the required quantity, shipment destination, and preferred production schedule so the quote reflects the actual order context. Texas Instruments lists the part as orderable in the DGN package, but a specific lead-time interval requires confirmation for the current date and order quantity.
Is THS4222DGN in stock?
Current THS4222DGN inventory should be confirmed through the Request a Quote form on this page. The exact orderable MPN is THS4222DGN in the 8-pin HVSSOP DGN package, so include that suffix when requesting availability. Stock can differ from the broader THS4222 family listing, and an accepted quote provides confirmation of the quantity that can be allocated for the requested delivery schedule.
THS4222DGN vs THS4222DGNR - which is better?
THS4222DGN and THS4222DGNR identify the same THS4222 dual-amplifier configuration and 8-pin HVSSOP footprint, but their ordering suffixes differ. THS4222DGN is listed with tube packaging, while THS4222DGNR is the tape-and-reel orderable variant. For a new PCB, the choice should follow the assembler’s component-handling method and required production format rather than an electrical-performance difference.
THS4222DGN vs THS4042IDGN - which is better for precision signal conditioning?
THS4222DGN is the better match when the design specifically requires the THS4222 low-distortion, high-output-swing family. A published comparison identifies both devices as dual, voltage-feedback amplifiers in 8-pin HVSSOP packages, but their intended performance envelopes differ: THS4042 is described as a high-frequency precision amplifier, while THS4222 emphasizes low distortion and high output swing. Choose using the complete datasheet requirements for bandwidth, slew rate, distortion, and output drive.
When should I choose THS4222DGN over THS4042IDGN?
Choose THS4222DGN when rail-to-rail output, high output swing, and low distortion are the dominant requirements for driving data converters or conditioning video signals. Both parts are presented as dual voltage-feedback amplifiers in 8-pin HVSSOP packages, so the footprint offers a useful starting point for comparison. The final decision should compare the required signal amplitude and bandwidth against each amplifier’s distortion, slew-rate, and output-current characteristics.
When should I choose THS4222DGN over THS4222DGNR?
Choose THS4222DGN when the assembly process expects tube-packaged components, and choose THS4222DGNR when the assembler requires tape-and-reel presentation for automated pick-and-place. Both options retain the same THS4222 family electrical identity and 8-pin HVSSOP DGN footprint. Confirm reel orientation, dry-pack requirements, floor-life controls, and the manufacturer ordering information before releasing the PCB for assembly.
Is THS4222DGN suitable for video switching applications?
Yes, the THS4222DGN is suitable for video-switching and related low-distortion signal-conditioning applications. Texas Instruments specifically identifies the family for data-converter drive, video switching, and other low-distortion uses, while its rail-to-rail output supports operation across a broad portion of the available signal range. The exact channel bandwidth, output swing, and distortion must meet the video format, resolution, and loading requirements.
What can replace THS4222DGN?
THS4222DGNR is the closest identified drop-in ordering alternative because it retains the THS4222 dual-amplifier configuration and 8-pin HVSSOP DGN footprint. THS4042IDGN and THS4041CDGNR are also shown in comparison data using 8-pin HVSSOP packages, but their performance requirements must be checked before substitution. Use the Request a Quote form on this page to confirm availability of the exact orderable suffix.
What is the best cross-brand equivalent for THS4222DGN?
No verified cross-brand, pin-to-pin drop-in equivalent for THS4222DGN was identified in the available replacement information. Because the THS4222DGN combines a dual rail-to-rail output, low-distortion characteristics, a 3 V to 15 V supply range, and an 8-pin HVSSOP footprint, a substitute must satisfy all of those constraints rather than merely share the package. Use a parametric cross-reference process and verify the complete manufacturer datasheet before approving a cross-brand replacement.

Data referensi kejuruteraan untuk THS4222DGN — perbandingan, panduan rancangan, dan maklumat kesediaan

Panduan Pilihan

Choose THS4222DGN when a dual-channel, rail-to-rail-output amplifier is needed for data-converter drive, video switching, or another low-distortion signal path operating from 3 V to 15 V. Choose THS4222DGNR when the electrical design is unchanged but the assembler requires tape-and-reel handling; the package and pin arrangement remain the same. Consider THS4042IDGN when the design emphasizes high-frequency precision amplification, but verify its complete electrical limits against the required output swing, slew rate, distortion, and stability. THS4041CDGNR may fit an 8-pin HVSSOP layout, but it is a different amplifier family and should be approved only after its channel configuration and all application-critical parameters are confirmed. For production sourcing, submit the exact DGN suffix and required quantity through the Request a Quote form.

Perbandingan dengan Gantian

Parametr Produk Ini THS4222DGNR THS4042IDGN THS4041CDGNR
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Package HVSSOP-8 (DGN) HVSSOP-8 (DGN) HVSSOP-8 (DGN) HVSSOP-8 (DGN)
Primary Application Data-converter drive, video switching, and low-distortion signal conditioning Data-converter drive, video switching, and low-distortion signal conditioning High-frequency precision circuit design High-frequency amplifier applications

Penyeberangsung Jelas

  • Dedicated low-distortion family positioning (vsTHS4042IDGN)
  • Direct assembly-format reuse (vsTHS4222DGNR)
  • Low-voltage dual-channel integration (vsTHS4041CDGNR)

Catatan Desain

Place the power-supply bypass capacitor immediately adjacent to the amplifier supply and ground pins, with a short, low-inductance connection to the ground plane. High-speed feedback resistors and compensation components should also be close to the relevant input and output pins. Avoid routing high-speed output traces beneath the package or between input and feedback nodes, because parasitic inductance can create ringing, overshoot, or instability.

Do not assume rail-to-rail output means the output can reach either supply rail at every frequency, load, or temperature. Check the manufacturer output-swing and output-current graphs for the actual load and signal amplitude. Likewise, verify the complete electrical characteristics for the selected THS4222 family member before relying on a proposed substitute, especially bandwidth, slew rate, distortion, and stability with the selected feedback network.

Begin the power budget with the specified 14 mA quiescent current for the dual THS4222 family, then add expected load current and the current associated with the feedback and output stages. For a single 3 V to 15 V supply design, verify that the amplifier can produce the required signal swing at the minimum available voltage. Keep local decoupling current loops small so switching-supply ripple does not propagate directly into the analog output node.

Maklumat Kesediaan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bosong logam timbal
Unknown
Bosong halogen
Unknown
Mineral konflik
Unknown

No specific RoHS, REACH, lead-free, halogen-free, conflict-minerals, or automotive-qualification statement was identified for the exact MPN. The family is a commercial amplifier IC, so AEC-Q100 is recorded as not applicable.

Data disahkan pada: 2026-11-20 — data yang disahkan dan disusun semula oleh pasukan kejuruteraan komponen XAIPART

Pencarian Berhubungan

THS4222DGN datasheet THS4222DGN pinout THS4222DGN datasheet pdf THS4222DGN equivalent THS4222DGN replacement THS4222DGN cross reference THS4222DGN vs THS4042IDGN THS4222DGN footprint THS4222DGN price THS4222DGN stock Texas Instruments THS4222DGN THS4222 HVSSOP-8 pinout THS4222 data converter driver THS4222 video switching amplifier

Komponen dan Tanda berkaitan

Texas Instruments THS4222DGN THS4222DGNR THS4042IDGN THS4041CDGNR operational amplifier voltage-feedback amplifier high-speed amplifier low-distortion amplifier rail-to-rail output amplifier analog amplifier IC semiconductor HVSSOP-8 DGN package surface-mount package data-converter drive video switching signal conditioning quiescent current output swing power supply Texas Instruments THS4222 family
RFRC Saring Pantas
Isikan butiran lengkap — pasukan jualan kami akan bertindak balas dalam masa 24 jam
Nombor Bahagian Pengeluar Pakej QTY Harga Target Lengkap
✓
Pesan diskon sudah disubmit!

Kami akan bertindak balas kepada emel anda dalam tempoh 24 jam

1
RFQ Diserahkan
2
kutipan Diterima
3
Order Dipesan
4
Pembayaran
5
Dihantar
6
Diantar
Lihat Perincian RFQ