STMicroelectronics

TS522IDT - 15MHz Dual Low-Noise Op Amp | STMicroelectronics

MPN: TS522IDT ✓ Aktif
4.5 nV/√Hz Vdss 8-pin SOIC Package
MOQ: 1 |

TS522IDT Ringkasan

STMicroelectronics TS522IDT is a dual precision operational amplifier with a 15 MHz gain-bandwidth product, 4.5 nV/√Hz low-voltage noise, and a 7 V/µs slew rate. The device operates from 2.5 V to 15 V and is packaged in an 8-pin SOIC for dual-amplifier signal-conditioning applications.

An operational amplifier is a voltage-controlled, high-gain analog building block that compares an input signal with a feedback-defined reference. The TS522IDT contains two amplifiers in one package, placing it within the operational-amplifier hierarchy of analog ICs and broader semiconductor signal-processing components. Its dual configuration reduces package count when a board requires two closely related analog channels.

The primary benefits are low input offset voltage, low voltage noise, and high dynamic performance. A 4.5 nV/√Hz noise density supports accurate amplification of small signals, while the 15 MHz gain-bandwidth product provides useful bandwidth for audio, instrumentation, filtering, and general-purpose analog stages. The 7 V/µs slew rate allows the amplifiers to follow changing signals with limited distortion.

Each amplifier can operate with supply voltages between 2.5 V and 15 V, allowing operation from low-voltage analog systems through higher-voltage industrial analog rails. The monolithic dual-amplifier construction is intended to provide matching behavior between the two channels, although circuit-level offset and noise measurements should still be checked in the final design. The 8-pin SOIC package supports conventional surface-mount assembly and is convenient for prototypes as well as production boards.

Typical uses include low-noise audio preamplification, microphone signal conditioning, active filtering, instrumentation amplifiers, sensor interfaces, and analog buffering. Two independent amplifier channels can process stereo audio, implement a differential input stage, or combine filtering with output buffering. Supply-headroom planning remains important because the usable output range depends on the selected rail voltages and output load.

For low-noise layouts, use short feedback paths, keep input and ground connections away from switching nodes, and place input bypass capacitance close to the supply pins. Decoupling requirements and compensation limits should be confirmed in the STMicroelectronics TS522IDT datasheet. Stable operation also depends on following the prescribed capacitive-load limits and providing suitable output-current margin for the connected load.

This product page combines the verified TS522IDT specifications, package information, replacement considerations, comparison parameters, and application guidance. It is intended to help engineers determine whether the dual amplifier fits a specific voltage, bandwidth, noise, and PCB-layout requirement before completing a prototype or production design.

Pilihan pengganti yang segera untuk TS522IDT — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.

Varietas dalam siri ini

Model serupa yang kompatibel dengan pengganti yang segera TS522IDT (sama faktor bentuk dan kaki) — berbeza dalam Amplifier Type, Mounting Type, Package, Slew Rate, Maximum Input Offset Voltage.

STMicroelectronics
Amplifier Type: Precision low-noise operational amplifier
Maximum Input Offset Voltage: 850 µV
Bandingkan Dengan TS522IDT →
STMicroelectronics
Mounting Type: Through-hole
Package: 8-pin mini-DIP
Slew Rate: 7 V/us
Bandingkan Dengan TS522IDT →

TS522ID

✅ Masuk Drop-In
STMicroelectronics
📦 SOIC-8
2 amplifiers · Precision low-noise operational amplifier · 15 MHz · 7 V/µs · 4.5 nV/√Hz · 850 µV · 0.002% · 2 kV

Hubungi untuk harga

Lihat Datasheet →

TS522IN

✅ Masuk Drop-In
STMicroelectronics
📦 SOIC-8
Dual precision operational amplifier · 2 channels · Audio applications · 15 MHz · 7 V/us · 4.5 nV/sqrt(Hz) · 850 uV · 0.002%

Hubungi untuk harga

Lihat Datasheet →

OP221GSZ

✅ Masuk Drop-In
📦 SOIC-8
Dual 15 MHz-class amplifier in an 8-pin SOIC; nominal gain-bandwidth-product difference is 0%, while offset, noise, bias-current, and supply details require comparison.

📋 Alternatif rujukan (tidak dalam katalog)

OPA2131UAE4

✅ Masuk Drop-In
📦 SOIC-8
Dual precision FET-input operational amplifier in an 8-pin SOIC; bandwidth and noise differences are not stated in the comparison listing and must be checked against the 15 MHz TS522IDT.

📋 Alternatif rujukan (tidak dalam katalog)

TS522IDT Penilaian maksimum & Ciri-ciri Elektrik

Amplifier Type Dual precision operational amplifier
Number of Amplifiers 2 amplifiers
Gain-Bandwidth Product 15 MHz
Input Voltage Noise Density 4.5 nV/√Hz
Slew Rate 7 V/µs
Minimum Supply Voltage 2.5 V
Maximum Supply Voltage 15 V
Slew Rate 7 V/µs
Kemasan 8-pin SOIC
Jenis Pemasangan Surface Mount
Tegangan Pemberi Arus 2.5 V to 15 V
Status RoHS unknown
REACH Status unknown
AEC-Q100 Qualification not_applicable

Panduan Konfigurasi Pin TS522IDT 8-pin soic

Konfigurasi pin untuk TS522IDT (8-pin soic pakai). Komponen analog ini mempunyai pin masukan, keluaran, dan kuasa. Rujuk dokumen pengeluar untuk konfigurasi pengecualian, pemulihan, dan pin aktifkan. Ideal untuk pengawasan isyarat dan litar pengukur.

Garis bentuk pengecah pakai 8-pin soic untuk TS522IDT

Tiada data garisan pin yang diperoleh untuk TS522IDT.

Rujuk kepada lembaran data untuk konfigurasi pin penuh.

Aplikasi Biasa

TS522IDT patut untuk 6 aplikasis: Low-Noise Audio Preamplifier, Stereo Audio Buffering, Instrumentation Signal Conditioning, Active Audio Filtering, Sensor Interface Amplification, General-Purpose Analog Buffering.

🎧

Low-Noise Audio Preamplifier

The TS522IDT fits low-level audio preamplification because its 4.5 nV/√Hz input-voltage noise density minimizes the amplifier-added noise floor, while the 15 MHz gain-bandwidth product provides bandwidth above the audible band. Place each channel in a noninverting or inverting amplifier stage, and keep the feedback resistors and input traces away from digital and switching-current paths. The 7 V/µs slew rate supports accurate reproduction of moderate-level transients. Confirm output swing, input bias current, and stable capacitive loading for the selected 2.5 V to 15 V supply arrangement.

🎧

Stereo Audio Buffering

The TS522IDT can buffer left and right stereo signals in a single 8-pin SOIC, reducing board area compared with two separate single-amplifier packages. Its 4.5 nV/√Hz voltage-noise density is suitable for preserving quiet source signals, and the 15 MHz gain-bandwidth product is substantially above the 20 kHz audio band. Use the amplifiers as unity-gain buffers when driving a higher-impedance downstream stage. Check the datasheet's output-current capability and capacitive-load limits for the exact receiving circuit, and route each channel symmetrically to reduce channel-to-channel timing differences.

🏭

Instrumentation Signal Conditioning

The TS522IDT is suitable for conditioning outputs from sensors and instrumentation blocks that contain small signals. Its 4.5 nV/√Hz input-voltage noise density supports low-noise amplification, and the 15 MHz gain-bandwidth product accommodates moderate-bandwidth filters and measurement front ends. The dual package can implement a differential amplifier, a gain stage, and an output buffer. Before selecting it, verify input bias current against sensor impedance, input offset voltage against the required measurement accuracy, and common-mode range against the sensor's output voltage.

🎵

Active Audio Filtering

The TS522IDT can implement active low-pass or band-pass sections around audio signals while combining a 15 MHz gain-bandwidth product with a 7 V/µs slew rate. These characteristics support useful closed-loop bandwidth and signal-transition capability beyond the audible range. Build the dual device as two filter channels or use one section for filtering and the other for gain compensation. Use stable resistor and capacitor values, keep feedback loops compact, and observe the manufacturer's capacitive-load guidance because excessive loading can alter phase margin and cause oscillation.

🧩

Sensor Interface Amplification

The TS522IDT can amplify low-level sensor outputs when its input characteristics match the sensor's source impedance and signal bandwidth. The 4.5 nV/√Hz voltage-noise density reduces the noise contribution from the amplifier, while the 15 MHz gain-bandwidth product leaves headroom for moderate-frequency conditioning stages. A differential sensor connection can use both amplifiers to amplify and reject common-mode voltage, subject to the verified common-mode range. Check offset and drift for precision measurements, and place high-impedance inputs on guarded or minimally exposed PCB traces.

🔧

General-Purpose Analog Buffering

The TS522IDT is appropriate for buffering a higher-impedance source into a lower-impedance load when the selected supply voltage and output-current requirements are met. Its 7 V/µs slew rate provides a practical dynamic-performance margin, and the 15 MHz gain-bandwidth product is suitable for many control, measurement, and communication-related analog blocks. Configure the unused channel for a stable reference or test point rather than leaving it floating. Confirm output swing, stability with the intended load, and thermal behavior using the electrical characteristics and application guidance in the manufacturer datasheet.

What is the TS522IDT?
The TS522IDT is a dual precision operational amplifier with a 15 MHz gain-bandwidth product, 4.5 nV/√Hz input-voltage noise density, and a 7 V/µs slew rate. According to the STMicroelectronics TS522IDT datasheet, it accepts a 2.5 V to 15 V supply and comes in an 8-pin SOIC package. Its two amplifiers are suited to audio, filtering, instrumentation, buffering, and other low-noise analog signal-conditioning circuits.
What are the key specifications of TS522IDT that engineers should know?
The TS522IDT's headline specifications are dual-amplifier configuration, 15 MHz gain-bandwidth product, 4.5 nV/√Hz input-voltage noise density, 7 V/µs slew rate, and a 2.5 V to 15 V operating-supply range. The STMicroelectronics TS522IDT datasheet identifies an 8-pin SOIC package. These ratings place the device between general-purpose op amps and higher-speed precision amplifiers, making it relevant to low-noise audio and instrumentation designs.
Where can I download the TS522IDT datasheet PDF?
The official TS522IDT datasheet is available through the STMicroelectronics product page at https://www.st.com/en/analog/amplifiers/op-amps/ts522.html. The TS522IDT datasheet PDF should be used for the authoritative pin description, electrical characteristics, recommended operating conditions, package drawings, and application information. Use that document to confirm input offset, bias current, output swing, and capacitive-load limits before finalizing a circuit.
Where can I find the TS522IDT pinout?
The TS522IDT pinout is identified by the manufacturer as an 8-pin SOIC dual operational amplifier. Use the pin-description table and package drawing in the STMicroelectronics TS522IDT datasheet when assigning PCB nets. Request a Quote on this page for the exact TS522IDT ordering information; the pin diagram should be cross-checked against the selected package and amplifier-channel orientation before routing begins.
Is TS522IDT suitable for audio preamplifier applications?
Yes, the TS522IDT is suitable for low-noise audio preamplification because it combines a 4.5 nV/√Hz input-voltage noise density with a 15 MHz gain-bandwidth product and 7 V/µs slew rate. According to the STMicroelectronics TS522IDT datasheet, its dual configuration can support two signal channels in one 8-pin SOIC. Actual headroom and distortion must be checked against the selected rail voltage and load.
What can replace the TS522IDT?
The closest documented replacement candidates are TS522ID, TS522IN, OP221GSZ, and OPA2131UAE4, but each requires package and electrical verification before substitution. TS522ID and TS522IN are the closest same-family choices, while OP221GSZ and OPA2131UAE4 are cross-brand options listed in comparison results. Confirm pinout, supply range, noise, offset, bandwidth, and compensation requirements using each candidate's manufacturer datasheet.
Is TS522IDT the same as OP221GSZ?
The TS522IDT and OP221GSZ are not necessarily identical even though both are dual operational amplifiers associated with 15 MHz-class performance. The TS522IDT is specified at 4.5 nV/√Hz noise density and 7 V/µs slew rate, while complete OP221GSZ characteristics must be checked separately. Treat OP221GSZ as a candidate replacement, not an unconditional substitute, until pinout and every critical electrical parameter have been matched.
When should I choose TS522IDT over OP221GSZ?
Choose the TS522IDT when its documented 4.5 nV/√Hz noise density, 7 V/µs slew rate, 2.5 V to 15 V supply range, and 8-pin SOIC construction match the design requirement. Choose OP221GSZ instead when its manufacturer specifications provide a better fit for offset, current, bandwidth, supply, or packaging requirements. Neither part should be selected solely from amplifier count and nominal bandwidth.
When should I choose TS522IDT over TS522ID?
Choose TS522IDT when the required ordering suffix, package, temperature grade, and lifecycle intent match that exact variant. TS522ID is listed as a directly comparable STMicroelectronics dual amplifier, but the two order codes may differ in package or ordering conventions even when their core amplifier ratings are similar. Verify the manufacturer package drawings and operating-temperature markings before treating TS522ID as a drop-in replacement.
Is TS522IDT suitable for instrumentation and sensor interfaces?
The TS522IDT can suit instrumentation and sensor-interface stages when the source impedance, noise bandwidth, and required accuracy align with its input characteristics. Its 4.5 nV/√Hz noise density and 15 MHz gain-bandwidth product are useful for low-level signals, while two channels can reduce component count. Bias current, input offset, common-mode range, and output swing must be confirmed in the datasheet for the exact operating point.
What is the power-supply voltage range of TS522IDT?
The TS522IDT operates from 2.5 V to 15 V, according to the STMicroelectronics TS522IDT datasheet. The selected rails determine headroom for input and output signals as well as usable output swing. For dual-rail systems, power each supply rail within the permitted limits, keep total supply voltage within the device rating, and decouple each rail close to the package.
What power and thermal considerations apply to TS522IDT?
TS522IDT power dissipation depends on supply voltage, quiescent current, output current, and the amplifier's operating mode, which are not fully characterized by the basic 2.5 V to 15 V range. Estimate dissipation from the actual rail voltage and load current, then compare the resulting junction-temperature rise with the package thermal limits in the manufacturer datasheet. Keep copper and thermal vias close to the SOIC for higher-duty-cycle analog stages.
Where can I buy TS522IDT online?
The TS522IDT can be requested through the Request a Quote form on this page. The device is identified as an 8-SOIC dual amplifier with a 15 MHz gain-bandwidth product and 2.5 V to 15 V supply range. Submit the required quantity, target sourcing date, and approved destination details to obtain current commercial availability, lead time, and quotation terms.
What is the price of TS522IDT?
Use the Request a Quote form on this page for the current TS522IDT quotation and volume terms. The platform renders current commercial pricing separately because prices and availability can change with quantity, market conditions, and requested delivery terms. For technical screening, the verified device description specifies a dual 15 MHz operational amplifier in an 8-pin SOIC with a 2.5 V to 15 V supply range.
What is the lead time and stock status of TS522IDT?
Current lead time, minimum order quantity, and stock allocation should be confirmed through the Request a Quote form on this page. The TS522IDT is an STMicroelectronics 8-pin SOIC dual operational amplifier rated for 2.5 V to 15 V supplies and 15 MHz gain-bandwidth product. Include your production forecast and required shipment date so the quotation can reflect a realistic supply commitment.

Data referensi kejuruteraan untuk TS522IDT — perbandingan, panduan rancangan, dan maklumat kesediaan

Panduan Pilihan

Choose the TS522IDT when the application benefits from two matched general-purpose precision amplifiers in one 8-pin SOIC and its verified 15 MHz bandwidth, 4.5 nV/√Hz noise density, 7 V/µs slew rate, and 2.5 V to 15 V supply range satisfy the design. TS522ID is the first same-family candidate to examine when a second ordering code is acceptable, but verify its exact package and temperature marking. Consider OP221GSZ when its complete electrical characteristics provide a closer match for offset, bias current, supply, or output-drive requirements. OPA2131UAE4 may suit designs needing a FET-input dual amplifier, but its bandwidth, noise, input characteristics, and electrical limits must be compared with the TS522IDT. For every substitute, confirm pin assignments, absolute maximum ratings, common-mode range, output swing, capacitive-load behavior, and temperature grade before treating it as a drop-in replacement.

Perbandingan dengan Gantian

Parametr Produk Ini TS522ID TS522IN OP221GSZ OPA2131UAE4
Package SOIC-8 SOIC-8 SOIC-8 SOIC-8 SOIC-8
Brand STMicroelectronics STMicroelectronics STMicroelectronics Analog Devices Texas Instruments
Amplifier Configuration Dual Dual Dual Dual Dual

Penyeberangsung Jelas

  • Documented low-noise performance (vsOP221GSZ)
  • Same-family STMicroelectronics sourcing path (vsOPA2131UAE4)
  • Wide single-supply operating range (vsOP221GSZ)

Catatan Desain

Route each high-impedance input directly to its amplifier pin and keep the loop area small. High-value feedback resistors should have short grounded guard geometry where practical, and sensitive analog traces should remain separated from switching nodes, inductors, and high-current return paths. The TS522IDT's 4.5 nV/√Hz noise density can reduce circuit noise, but poor PCB routing can still allow interference and parasitic currents to dominate the result.

Place the required bypass capacitors immediately adjacent to the supply pins and provide a low-impedance ground return. Keep the total voltage applied across the amplifier within the 2.5 V to 15 V operating range. When using dual supplies, confirm the absolute maximum and common-mode limits for each pin. Because the numerical quiescent current and output-current limits are not stated in the available product information, calculate dissipation from the final operating point before production release.

Do not assume that every dual SOIC-8 amplifier has interchangeable channel assignments, supply pins, or stability behavior. Compare the TS522IDT pin description and package drawing against the footprint of the intended alternative, then verify output swing, input bias current, common-mode range, and capacitive-load limits. Excessive capacitive loading or incorrect feedback compensation can cause oscillation even when the nominal 15 MHz bandwidth and 7 V/µs slew rate appear adequate.

For audio or instrumentation stages, evaluate the complete signal chain rather than only the closed-loop gain. The 15 MHz gain-bandwidth product limits the range over which useful low-noise closed-loop gain can be maintained, while the 7 V/µs slew rate influences large-signal behavior. Use short traces, maintain symmetrical channel layout for stereo circuits, and verify settling and distortion in the finished board with realistic source and load impedances.

Maklumat Kesediaan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bosong logam timbal
Unknown
Bosong halogen
Unknown
Mineral konflik
Unknown

No explicit environmental or automotive compliance statements were identified for this ordering code. AEC-Q100 is not applicable to this general-purpose analog amplifier based on its stated product class.

Pencarian Berhubungan

TS522IDT datasheet TS522IDT pinout TS522IDT datasheet pdf TS522IDT specifications TS522IDT SOIC-8 amplifier STMicroelectronics TS522IDT TS522IDT equivalent TS522IDT replacement TS522IDT vs OP221GSZ TS522IDT price TS522IDT stock TS522IDT audio preamplifier TS522IDT 15MHz amplifier TS522IDT 4.5nV amplifier TS522IDT application circuit

Komponen dan Tanda berkaitan

STMicroelectronics TS522IDT TS522ID TS522IN OP221GSZ OPA2131UAE4 dual operational amplifier precision operational amplifier operational amplifier amplifier IC analog IC semiconductor low-noise amplifier gain-bandwidth product input-voltage noise density slew rate feedback common-mode voltage input offset voltage SOIC-8 SOIC package family surface mount SMD audio preamplifier instrumentation amplifier sensor interface active filter signal conditioning RoHS REACH
RFRC Saring Pantas
Isikan butiran lengkap — pasukan jualan kami akan bertindak balas dalam masa 24 jam
Nombor Bahagian Pengeluar Pakej QTY Harga Target Lengkap
✓
Pesan diskon sudah disubmit!

Kami akan bertindak balas kepada emel anda dalam tempoh 24 jam

1
RFQ Diserahkan
2
kutipan Diterima
3
Order Dipesan
4
Pembayaran
5
Dihantar
6
Diantar
Lihat Perincian RFQ