STMicroelectronics

TS942IPT - 10kHz Dual RRO Op Amp | STMicroelectronics

MPN: TS942IPT ✓ Aktif
1.2 uA typical Vdss 2.4 uA typical for 2 channels Id 8-TSSOP Package
MOQ: 1 |

TS942IPT Ringkasan

The STMicroelectronics TS942IPT is a dual-circuit, rail-to-rail operational amplifier with a 10 kHz gain-bandwidth product, supplied in an 8-pin TSSOP package. The device combines rail-to-rail input and output capability with low supply current and is intended for compact, low-power analog signal-processing systems.

An operational amplifier is an analog integrated circuit that amplifies the voltage difference between its two inputs while using negative feedback to establish gain and bandwidth. A rail-to-rail input stage accepts signals close to the positive and negative supply rails, while a rail-to-rail output stage can approach those limits under suitable load conditions. The TS942IPT therefore belongs to the rail-to-rail operational-amplifier family within the broader amplifier and analog IC hierarchy.

Key characteristics include two amplifier circuits in one package, 10 kHz gain-bandwidth product, rail-to-rail operation, and approximately 1.2 µA supply current per channel. Its listed typical output current is 5 mA. These characteristics make it suitable for low-power sensor interfaces, portable instrumentation, and signal-conditioning circuits where device count, board area, and energy use are important constraints.

The TS942IPT uses an 8-TSSOP package measuring approximately 0.173 inch, or 4.40 mm, in width. Tape-and-reel packaging supports high-volume automated assembly. The manufacturer specifies an operating-temperature range of -40 °C to +85 °C. As a general-purpose dual amplifier, it can reduce component count in designs that need two nearly identical signal-conditioning channels.

Typical uses include low-level sensor signal conditioning, battery-powered measurement modules, industrial control interfaces, portable medical instruments, and low-voltage audio or communication front ends. Two independent amplifier sections can handle separate channels in a dual-axis sensor, differential receiver, filter, or gain stage, provided each channel's stability, common-mode range, and output-drive requirements are satisfied.

Designers should verify input and output headroom, capacitive-load behavior, noise performance, and output-current demand against the manufacturer datasheet. Decoupling capacitors should be placed close to the supply pins, and unused amplifier inputs should be biased to a defined common-mode voltage. The low 10 kHz bandwidth favors precision and low-power operation rather than high-speed signal handling.

This page combines the exact TS942IPT package and operating characteristics with application guidance, same-family drop-in alternatives, a parameter comparison, and practical layout considerations. It helps engineers evaluate the amplifier's role in low-power analog designs without confusing it with higher-bandwidth or higher-current rail-to-rail amplifiers.

Pilihan pengganti yang segera untuk TS942IPT — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.

TS942IDT

✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan
📦 TSSOP-8
Same 8-TSSOP footprint, dual rail-to-rail topology, and listed 10 kHz gain-bandwidth class; suffix-specific temperature and trim details differ by 0% in the confirmed gain-bandwidth value.

📋 Alternatif rujukan (tidak dalam katalog)

TS942ILT

✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan
📦 TSSOP-8
Same 8-TSSOP footprint and dual rail-to-rail amplifier architecture; the alternate family trim changes device-specific parameters while retaining the 10 kHz gain-bandwidth class.

📋 Alternatif rujukan (tidak dalam katalog)

TS942IYT

✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan
📦 TSSOP-8
Same 8-TSSOP footprint, dual-channel rail-to-rail configuration, and 10 kHz gain-bandwidth class; the alternative ordering code covers a different grade or trim configuration.

📋 Alternatif rujukan (tidak dalam katalog)

TS942IPT Penilaian maksimum & Ciri-ciri Elektrik

Number of Amplifier Circuits 2 circuits
Amplifier Type General-purpose operational amplifier
Input and Output Characteristic Rail-to-rail
Gain-Bandwidth Product 10 kHz
Supply Current per Channel 1.2 uA typical
Total Supply Current 2.4 uA typical for 2 channels
Output Current 5 mA typical
Kemasan 8-TSSOP
Package Width 0.173 inch (4.40 mm)
Gambaran Suhu Operasi -40 °C to +85 °C
Jenis Pemasangan Surface mount
Shipping Package Tape and reel

Panduan Konfigurasi Pin TS942IPT tape and reel

Konfigurasi pin untuk TS942IPT (tape and reel pakai). Komponen analog ini mempunyai pin masukan, keluaran, dan kuasa. Rujuk dokumen pengeluar untuk konfigurasi pengecualian, pemulihan, dan pin aktifkan. Ideal untuk pengawasan isyarat dan litar pengukur.

Garis bentuk pengecah pakai tape and reel untuk TS942IPT

Tiada data garisan pin yang diperoleh untuk TS942IPT.

Rujuk kepada lembaran data untuk konfigurasi pin penuh.

Aplikasi Biasa

TS942IPT patut untuk 6 aplikasis: Battery-Powered Sensor Conditioning, Portable Medical Monitoring, Industrial Control Signal Conditioning, Low-Voltage Communication Interface, Portable Audio Front End, Precision Current and Voltage Measurement.

🧩

Battery-Powered Sensor Conditioning

The TS942IPT fits low-energy sensor front ends because each amplifier channel draws approximately 1.2 µA of supply current and supports rail-to-rail signal operation. A typical circuit uses one channel to amplify a transducer output and the second for buffering or filtering before conversion by an ADC. The 10 kHz gain-bandwidth product is suitable for slow sensor signals, while the 8-TSSOP package conserves board area. Designers should verify the sensor output range, amplifier input-offset requirements, and common-mode operating region before fixing the gain.

💊

Portable Medical Monitoring

TS942IPT is suitable for compact medical-monitoring modules that amplify low-amplitude sensor signals while emphasizing low power consumption. The two amplifier channels can condition separate inputs from a biopotential or wearable sensor, or one channel can provide gain while the other supplies an active-filter or reference-buffer function. Rail-to-rail operation helps use the available supply range efficiently. The design must still account for offset, noise, isolation requirements, and applicable medical-system qualification processes before clinical deployment.

🏭

Industrial Control Signal Conditioning

The TS942IPT can condition slow industrial-control signals in compact sensor and actuator modules. Its dual-channel configuration allows independent amplification of two related inputs, such as a sensor measurement and a temperature reference, while the approximately 1.2 µA per-channel supply current supports low-power field equipment. Rail-to-rail inputs and outputs improve utilization of a low-voltage rail. Engineers should confirm common-mode limits, output-current demand, operating temperature, and protection requirements for the factory environment.

🌐

Low-Voltage Communication Interface

TS942IPT can support receive and transmit-side signal conditioning in low-speed, low-power communication equipment. One channel may amplify a receiver output while the other shapes or buffers a feedback or level-shifting signal. Its 10 kHz gain-bandwidth product favors baseband and control signals rather than high-speed data paths, and the dual TSSOP-8 package reduces component count. Layout should preserve a short return path and place supply bypass capacitance close to the amplifier.

🎧

Portable Audio Front End

The TS942IPT can serve as a low-level audio preamplifier or buffer in a battery-powered audio module. Rail-to-rail input and output behavior allows the amplifier to operate from a compact supply, and two channels can support stereo or microphone-related signal paths. The 5 mA typical output current and 10 kHz gain-bandwidth product indicate a device intended for modest signal levels and bandwidth. The circuit designer should verify output swing, distortion, noise, and capacitive-load behavior for the selected gain configuration.

⚡

Precision Current and Voltage Measurement

TS942IPT is appropriate for low-power precision measurement circuits where two amplifier channels can process voltage and current information. Rail-to-rail operation provides flexibility when signals occupy much of the available input range, while the approximately 1.2 µA per-channel supply current limits the amplifier's contribution to total system consumption. The 10 kHz bandwidth is appropriate for many slowly changing measurements. Offset voltage, input bias current, drift, resistor matching, and ADC acquisition timing remain the principal design considerations.

Ringkasan Produk Disebarkan

TS942IPT STMicroelectronics Dipergunakan di: Battery-Powered Sensor Conditioning, Portable Medical Monitoring, Industrial Control Signal Conditioning, Low-Voltage Communication Interface, Portable Audio Front End, Precision Current and Voltage Measurement TS942IDT Same-family sensor-interface alternative Dipergunakan di: Battery-Powered Sensor Conditioning, Low-Voltage Communication Interface TS942ILT Same-family dual-channel alternative Dipergunakan di: Portable Medical Monitoring, Portable Audio Front End TS942IYT Same-family alternate ordering code Dipergunakan di: Industrial Control Signal Conditioning, Precision Current and Voltage Measurement
What is the TS942IPT?
The TS942IPT is a dual-circuit, rail-to-rail, micropower operational amplifier from STMicroelectronics. According to the STMicroelectronics datasheet, it provides a 10 kHz gain-bandwidth product, approximately 1.2 µA of supply current per channel, and a typical output current of 5 mA in an 8-pin TSSOP package. It is intended for general-purpose low-power analog signal conditioning.
What are the key specifications of TS942IPT that engineers should know?
The TS942IPT combines two amplifier channels, rail-to-rail input and output behavior, a 10 kHz gain-bandwidth product, and approximately 1.2 µA of supply current per channel. The STMicroelectronics datasheet also lists a 5 mA typical output current, an 8-TSSOP package, and an operating range of -40 °C to +85 °C. These figures position it as a low-power, general-purpose analog amplifier.
Where to download the TS942IPT datasheet PDF?
The TS942IPT datasheet PDF is available from STMicroelectronics through the official TS942 product-document link associated with this page. The document describes the rail-to-rail micropower operational amplifier, its electrical characteristics, pin configuration, typical applications, and package information. Use the manufacturer's document for circuit design, decoupling, stability, and absolute-maximum-rating decisions.
Where can I find the TS942IPT pinout and package details?
The TS942IPT uses an 8-pin TSSOP package, and its complete pin assignment should be taken from the pin-description table in the STMicroelectronics datasheet. The package width is listed as approximately 0.173 inch, or 4.40 mm. Confirm supply, ground, input, and output assignments against the exact ordering code before laying out a PCB or replacing an existing amplifier.
Where to buy TS942IPT online?
The TS942IPT can be requested through the Request a Quote form on this page. The form allows buyers to specify the required quantity, packaging, and delivery requirements without relying on static catalog pricing. Because the exact MPN is an 8-pin TSSOP ordering code, include TS942IPT in the quote request and specify whether factory tape-and-reel presentation is required.
What is the price of TS942IPT?
Current pricing for TS942IPT is not displayed as a static value and is handled through the Request a Quote form on this page. Submit the exact MPN, required quantity, and preferred delivery terms for a quote tied to the requested order. The part's original tape-and-reel presentation and the 8-TSSOP package should be stated when requesting quotation.
What is the lead time for TS942IPT?
The current lead time for TS942IPT should be confirmed through the Request a Quote form on this page. Provide the required quantity and delivery destination so the supplier can respond against the exact 8-pin TSSOP ordering code. For production planning, also state whether partial shipments are acceptable and whether reels, cut tape, or another packing format is needed.
Is TS942IPT in stock?
Stock status for TS942IPT should be checked through the Request a Quote form on this page because availability can change with order volume and packaging requirements. Quote requests should identify the exact TS942IPT MPN and quantity. If an existing design uses a different TS942 temperature or ordering suffix, identify that suffix separately rather than treating it as an exact TS942IPT request.
TS942IPT vs TS942IDT - which is better for a temperature-controlled design?
The TS942IPT and TS942IDT belong to the same dual rail-to-rail amplifier family and use the same 8-TSSOP footprint, but their ordering codes must be checked for temperature-grade and electrical-detail differences. The STMicroelectronics TS942 datasheet provides the authoritative comparison. Choose the suffix whose temperature range, trim, and electrical limits exactly match the production environment.
What is the difference between TS942IPT and TS942ILT?
The TS942IPT and TS942ILT use the same dual rail-to-rail, 8-TSSOP amplifier format, while their ordering codes identify different member variants within the TS942 family. The available TS942 listing identifies the target as a 10 kHz general-purpose amplifier. Confirm gain, offset, temperature range, and suffix-specific limits in the STMicroelectronics datasheet before treating either device as a substitute.
When should I choose TS942IPT over another TS942 family variant?
Choose TS942IPT when the system requires the exact STMicroelectronics ordering code specified for the 10 kHz dual rail-to-rail amplifier in 8-TSSOP packaging. The main selection criteria are electrical behavior, temperature grade, package, production configuration, and qualification requirements rather than generic amplifier function. Use another TS942 suffix only after confirming the relevant table in the manufacturer datasheet.
Is TS942IPT suitable for low-power sensor interfaces?
The TS942IPT is well suited to many low-power sensor-interface circuits because it combines rail-to-rail operation with approximately 1.2 µA of supply current per channel and a 10 kHz gain-bandwidth product. Its suitability depends on sensor output range, required noise performance, common-mode limits, and signal frequency. The STMicroelectronics datasheet should confirm input offset, bias current, and noise requirements.
What can replace TS942IPT?
The closest supported replacements are verified drop-in members of the STMicroelectronics TS942 family that retain the same 8-TSSOP footprint and compatible electrical architecture. TS942IDT, TS942ILT, and TS942IYT are listed as same-family candidates, but each must be checked for suffix-specific temperature, trim, and gain differences. A cross-brand substitute should be accepted only after a pin and parameter review.
What is the best cross-brand equivalent for TS942IPT?
No cross-brand drop-in equivalent can be confirmed from the available component records because the TS942IPT cross-reference search did not identify a pin-compatible substitute with matching electrical parameters. The TS942IDT, TS942ILT, and TS942IYT alternatives are same-family STMicroelectronics devices. For an outside-manufacturer replacement, verify the 8-TSSOP pinout, supply range, bandwidth, offset, bias current, and stability before approving it.
How should TS942IPT be used in a dual-channel low-voltage design?
Use each TS942IPT channel as an independent voltage amplifier or active-filter section, with its supply pins connected to the same low-voltage rail and its ground pins connected to the circuit common. Place local bypass capacitors close to the supply connections and bias unused inputs at a defined voltage. According to the STMicroelectronics datasheet, the operating range is -40 °C to +85 °C.

Data referensi kejuruteraan untuk TS942IPT — perbandingan, panduan rancangan, dan maklumat kesediaan

Panduan Pilihan

Choose TS942IPT when the design needs a dual, rail-to-rail, general-purpose operational amplifier with a 10 kHz gain-bandwidth product, approximately 1.2 µA of supply current per channel, and an 8-TSSOP package. It is particularly appropriate for battery-powered sensor interfaces, low-speed industrial measurement, portable instrumentation, and compact control systems. TS942IDT, TS942ILT, or TS942IYT may be considered when a different ordering code provides the required grade or trim, but suffix-specific temperature and electrical details must be checked. No cross-brand device should be selected solely because it also uses eight pins; supply range, offset, bias current, bandwidth, stability, and input/output behavior must match. If either amplifier channel is unused, bias its inputs to a defined voltage and account for the complete package supply current.

Perbandingan dengan Gantian

Parametr Produk Ini TS942IDT TS942ILT TS942IYT
Package TSSOP-8 TSSOP-8 TSSOP-8 TSSOP-8
Brand STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics
Number of Amplifier Circuits 2 circuits 2 circuits 2 circuits 2 circuits
Gain-Bandwidth Product 10 kHz 10 kHz 10 kHz 10 kHz
Input and Output Characteristic Rail-to-rail Rail-to-rail Rail-to-rail Rail-to-rail
Mounting Type Surface mount Surface mount Surface mount Surface mount
Shipping Format Tape and reel Tape and reel Tape and reel Tape and reel

Penyeberangsung Jelas

  • Combines two rail-to-rail amplifier channels in one compact package (vsTS942IDT)
  • Low power is suitable for continuously operating compact systems (vsTS942ILT)
  • Provides enough bandwidth for low-frequency analog signal conditioning (vsTS942IYT)

Catatan Desain

Place the supply bypass capacitor directly between the TS942IPT supply and ground pins, with a short ground return and minimal loop area. Because the amplifier supports rail-to-rail operation, component tolerances, input bias current, and output loading can become more important than in a conventional mid-supply signal stage. Route sensitive input and feedback traces away from switching nodes and high-current return paths to reduce coupled noise.

Do not assume that two channels in the same package have identical layouts for every feedback configuration. Each channel requires its own stable compensation network and must meet the output-voltage, input common-mode, and capacitive-load conditions stated by STMicroelectronics. A 10 kHz gain-bandwidth product also means that attempting high closed-loop gain on fast signals can introduce substantial phase shift, so verify stability with the intended source and load impedances.

Estimated power dissipation can be calculated from the actual supply voltage and total channel supply current: P = VIN × IQUIESCENT. Using 3.3 V and the listed 2.4 uA total typical supply current for both channels gives approximately 7.92 uW. This estimate excludes load current and switching losses, but it shows why TS942IPT is suitable for aggressively power-managed systems when its bandwidth and output-current capability meet the signal requirements.

Maklumat Kesediaan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bosong logam timbal
Unknown
Bosong halogen
Unknown
Mineral konflik
Unknown

No specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statement appears in the product records. AEC-Q100 is not applicable because this is a general-purpose analog amplifier rather than an automotive-qualified device.

Data disahkan pada: 2026-11-16 — data yang disahkan dan disusun semula oleh pasukan kejuruteraan komponen XAIPART

Pencarian Berhubungan

TS942IPT datasheet TS942IPT datasheet pdf TS942IPT pinout TS942IPT specifications TS942IPT price TS942IPT stock TS942IPT replacement TS942IPT equivalent TS942IPT vs TS942IDT STMicroelectronics TS942IPT TS942IPT TSSOP-8 footprint TS942IPT micropower op amp

Komponen dan Tanda berkaitan

STMicroelectronics TS942IPT TS942IDT TS942ILT TS942IYT operational amplifier dual amplifier rail-to-rail input rail-to-rail output low-dropout signal path analog integrated circuit amplifier IC TSSOP-8 TSSOP package family surface-mount package gain-bandwidth product supply current common-mode voltage active filter sensor signal conditioning battery-powered electronics industrial control portable medical monitoring
RFRC Saring Pantas
Isikan butiran lengkap — pasukan jualan kami akan bertindak balas dalam masa 24 jam
Nombor Bahagian Pengeluar Pakej QTY Harga Target Lengkap
✓
Pesan diskon sudah disubmit!

Kami akan bertindak balas kepada emel anda dalam tempoh 24 jam

1
RFQ Diserahkan
2
kutipan Diterima
3
Order Dipesan
4
Pembayaran
5
Dihantar
6
Diantar
Lihat Perincian RFQ