TS942IPT - 10kHz Dual RRO Op Amp | STMicroelectronics
MPN: TS942IPT ✓ فعالTS942IPT نمای کلی
An operational amplifier is an analog integrated circuit that amplifies the voltage difference between its two inputs while using negative feedback to establish gain and bandwidth. A rail-to-rail input stage accepts signals close to the positive and negative supply rails, while a rail-to-rail output stage can approach those limits under suitable load conditions. The TS942IPT therefore belongs to the rail-to-rail operational-amplifier family within the broader amplifier and analog IC hierarchy.
Key characteristics include two amplifier circuits in one package, 10 kHz gain-bandwidth product, rail-to-rail operation, and approximately 1.2 µA supply current per channel. Its listed typical output current is 5 mA. These characteristics make it suitable for low-power sensor interfaces, portable instrumentation, and signal-conditioning circuits where device count, board area, and energy use are important constraints.
The TS942IPT uses an 8-TSSOP package measuring approximately 0.173 inch, or 4.40 mm, in width. Tape-and-reel packaging supports high-volume automated assembly. The manufacturer specifies an operating-temperature range of -40 °C to +85 °C. As a general-purpose dual amplifier, it can reduce component count in designs that need two nearly identical signal-conditioning channels.
Typical uses include low-level sensor signal conditioning, battery-powered measurement modules, industrial control interfaces, portable medical instruments, and low-voltage audio or communication front ends. Two independent amplifier sections can handle separate channels in a dual-axis sensor, differential receiver, filter, or gain stage, provided each channel's stability, common-mode range, and output-drive requirements are satisfied.
Designers should verify input and output headroom, capacitive-load behavior, noise performance, and output-current demand against the manufacturer datasheet. Decoupling capacitors should be placed close to the supply pins, and unused amplifier inputs should be biased to a defined common-mode voltage. The low 10 kHz bandwidth favors precision and low-power operation rather than high-speed signal handling.
This page combines the exact TS942IPT package and operating characteristics with application guidance, same-family drop-in alternatives, a parameter comparison, and practical layout considerations. It helps engineers evaluate the amplifier's role in low-power analog designs without confusing it with higher-bandwidth or higher-current rail-to-rail amplifiers.
جایگزینهای drop-in برای TS942IPT — همان پکیج، سازگار پینبهپین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.
TS942IDT
✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده📋 جایگزین مرجع (خارج از کاتالوگ)
TS942ILT
✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده📋 جایگزین مرجع (خارج از کاتالوگ)
TS942IYT
✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده📋 جایگزین مرجع (خارج از کاتالوگ)
TS942IPT حداکثر مقادیر مجاز و مشخصات الکتریکی
| Number of Amplifier Circuits | 2 circuits |
| Amplifier Type | General-purpose operational amplifier |
| Input and Output Characteristic | Rail-to-rail |
| Gain-Bandwidth Product | 10 kHz |
| Supply Current per Channel | 1.2 uA typical |
| Total Supply Current | 2.4 uA typical for 2 channels |
| Output Current | 5 mA typical |
| بستهبندی | 8-TSSOP |
| Package Width | 0.173 inch (4.40 mm) |
| محدوده دمای کاری | -40 °C to +85 °C |
| نوع نصب | Surface mount |
| Shipping Package | Tape and reel |
راهنمای پیکربندی پین TS942IPT tape and reel
پیکربندی پین برای TS942IPT (پکیج tape and reel). این قطعه آنالوگ دارای پینهای ورودی، خروجی و تغذیه است. برای پیکربندیهای پین offset null، جبرانسازی و فعالسازی به دیتاشیت سازنده مراجعه کنید. ایدهآل برای مدارهای شرطیسازی سیگنال و تقویتکننده.
داده پینآوت تفصیلی موجود نیست برای TS942IPT.
به دیتاشیت برای پیکربندی کامل پینها.
کاربردهای معمول
TS942IPT مناسب است برای 6 کاربردs: Battery-Powered Sensor Conditioning, Portable Medical Monitoring, Industrial Control Signal Conditioning, Low-Voltage Communication Interface, Portable Audio Front End, Precision Current and Voltage Measurement.
Battery-Powered Sensor Conditioning
The TS942IPT fits low-energy sensor front ends because each amplifier channel draws approximately 1.2 µA of supply current and supports rail-to-rail signal operation. A typical circuit uses one channel to amplify a transducer output and the second for buffering or filtering before conversion by an ADC. The 10 kHz gain-bandwidth product is suitable for slow sensor signals, while the 8-TSSOP package conserves board area. Designers should verify the sensor output range, amplifier input-offset requirements, and common-mode operating region before fixing the gain.
پیشنهادی
Portable Medical Monitoring
TS942IPT is suitable for compact medical-monitoring modules that amplify low-amplitude sensor signals while emphasizing low power consumption. The two amplifier channels can condition separate inputs from a biopotential or wearable sensor, or one channel can provide gain while the other supplies an active-filter or reference-buffer function. Rail-to-rail operation helps use the available supply range efficiently. The design must still account for offset, noise, isolation requirements, and applicable medical-system qualification processes before clinical deployment.
پیشنهادی
Industrial Control Signal Conditioning
The TS942IPT can condition slow industrial-control signals in compact sensor and actuator modules. Its dual-channel configuration allows independent amplification of two related inputs, such as a sensor measurement and a temperature reference, while the approximately 1.2 µA per-channel supply current supports low-power field equipment. Rail-to-rail inputs and outputs improve utilization of a low-voltage rail. Engineers should confirm common-mode limits, output-current demand, operating temperature, and protection requirements for the factory environment.
پیشنهادی
Low-Voltage Communication Interface
TS942IPT can support receive and transmit-side signal conditioning in low-speed, low-power communication equipment. One channel may amplify a receiver output while the other shapes or buffers a feedback or level-shifting signal. Its 10 kHz gain-bandwidth product favors baseband and control signals rather than high-speed data paths, and the dual TSSOP-8 package reduces component count. Layout should preserve a short return path and place supply bypass capacitance close to the amplifier.
پیشنهادی
Portable Audio Front End
The TS942IPT can serve as a low-level audio preamplifier or buffer in a battery-powered audio module. Rail-to-rail input and output behavior allows the amplifier to operate from a compact supply, and two channels can support stereo or microphone-related signal paths. The 5 mA typical output current and 10 kHz gain-bandwidth product indicate a device intended for modest signal levels and bandwidth. The circuit designer should verify output swing, distortion, noise, and capacitive-load behavior for the selected gain configuration.
پیشنهادی
Precision Current and Voltage Measurement
TS942IPT is appropriate for low-power precision measurement circuits where two amplifier channels can process voltage and current information. Rail-to-rail operation provides flexibility when signals occupy much of the available input range, while the approximately 1.2 µA per-channel supply current limits the amplifier's contribution to total system consumption. The 10 kHz bandwidth is appropriate for many slowly changing measurements. Offset voltage, input bias current, drift, resistor matching, and ADC acquisition timing remain the principal design considerations.
پیشنهادی
خلاصه محصولات پیشنهادی
دادههای مرجع مهندسی برای TS942IPT — مقایسه، راهنمای طراحی و اطلاعات انطباق.
راهنمای انتخاب
مقایسه با جایگزینها
| پارامتر | این محصول | TS942IDT | TS942ILT | TS942IYT |
|---|---|---|---|---|
| Package | TSSOP-8 | TSSOP-8 | TSSOP-8 | TSSOP-8 |
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Number of Amplifier Circuits | 2 circuits | 2 circuits | 2 circuits | 2 circuits |
| Gain-Bandwidth Product | 10 kHz | 10 kHz | 10 kHz | 10 kHz |
| Input and Output Characteristic | Rail-to-rail | Rail-to-rail | Rail-to-rail | Rail-to-rail |
| Mounting Type | Surface mount | Surface mount | Surface mount | Surface mount |
| Shipping Format | Tape and reel | Tape and reel | Tape and reel | Tape and reel |
تفاوتهای کلیدی
- Combines two rail-to-rail amplifier channels in one compact package (در مقابلTS942IDT)
- Low power is suitable for continuously operating compact systems (در مقابلTS942ILT)
- Provides enough bandwidth for low-frequency analog signal conditioning (در مقابلTS942IYT)
یادداشتهای طراحی
Place the supply bypass capacitor directly between the TS942IPT supply and ground pins, with a short ground return and minimal loop area. Because the amplifier supports rail-to-rail operation, component tolerances, input bias current, and output loading can become more important than in a conventional mid-supply signal stage. Route sensitive input and feedback traces away from switching nodes and high-current return paths to reduce coupled noise.
Do not assume that two channels in the same package have identical layouts for every feedback configuration. Each channel requires its own stable compensation network and must meet the output-voltage, input common-mode, and capacitive-load conditions stated by STMicroelectronics. A 10 kHz gain-bandwidth product also means that attempting high closed-loop gain on fast signals can introduce substantial phase shift, so verify stability with the intended source and load impedances.
Estimated power dissipation can be calculated from the actual supply voltage and total channel supply current: P = VIN × IQUIESCENT. Using 3.3 V and the listed 2.4 uA total typical supply current for both channels gives approximately 7.92 uW. This estimate excludes load current and switching losses, but it shows why TS942IPT is suitable for aggressively power-managed systems when its bandwidth and output-current capability meet the signal requirements.
اطلاعات انطباق
No specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statement appears in the product records. AEC-Q100 is not applicable because this is a general-purpose analog amplifier rather than an automotive-qualified device.