XC4VFX40-11FF672I - 90nm Virtex-4 FX FPGA | AMD
MPN: XC4VFX40-11FF672I ✓ AktifXC4VFX40-11FF672I Ringkasan
A field-programmable gate array is a semiconductor whose digital logic, interconnect, and I/O behavior are configured after manufacture. FPGA devices sit within the broader programmable-logic hierarchy alongside CPLDs, and are used when designers need parallel processing, flexible interfaces, high-speed serial connectivity, or application-specific hardware acceleration. The Virtex-4 FX platform combines general-purpose logic resources with integrated capabilities intended for demanding embedded, communications, and signal-processing systems.
The XC4VFX40 family provides 4,656 logic cells in the configuration listed for this device. Its CMOS implementation supports a 1.2 V core supply, while user I/O and auxiliary supply requirements are defined by the family documentation. The 672-pin FCBGA package provides a substantial connection count for external memory, parallel buses, clocks, configuration signals, and high-speed I/O. The reported 1,028 MHz internal frequency represents a device-level performance figure rather than a guarantee that every I/O interface can operate at that frequency.
Configuration and system integration are central to this device’s implementation. Designers must observe the power sequencing, configuration-interface, clocking, decoupling, and I/O-standard requirements in the AMD Virtex-4 family documentation. A 27 mm by 27 mm BGA also demands careful PCB planning because solder escape routing, thermal management, and assembly process controls become more restrictive as pin pitch decreases.
Typical applications include telecommunications equipment, industrial control, test and measurement, high-speed communications, embedded signal processing, and custom accelerator logic. The large FCBGA package is most appropriate for systems that can support a complex multilayer PCB and controlled assembly process rather than low-complexity prototype boards.
The principal design trade-off is capability versus implementation effort. This FPGA offers substantial programmable logic and a high pin count, but requires careful BGA layout, robust multi-rail power delivery, thermal analysis, and validated configuration logic. Verify all speed-grade, temperature, voltage, and package details before releasing a production PCB.
This page combines device-level specifications, engineering guidance, application analysis, and same-footprint upgrade options to support FPGA selection and board design. It also highlights where changes in speed grade, temperature class, or package marking affect replacement decisions.
Pilihan pengganti yang segera untuk XC4VFX40-11FF672I — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.
Varietas dalam siri ini
Model serupa yang kompatibel dengan pengganti yang segera XC4VFX40-11FF672I (sama faktor bentuk dan kaki) — berbeza dalam Logic Cells, Logic Family, Package Type, Speed Grade.
XC4VFX40-11FFG672I
✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif rujukan (tidak dalam katalog)
XC4VFX40-12FF672I
✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif rujukan (tidak dalam katalog)
XC4VFX40-10FF672I
✅ Masuk Drop-In ⚠️ Spesifikasi Tidak DisahkanHubungi untuk harga
Lihat Datasheet →XC4VFX40-11FF672C
✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif rujukan (tidak dalam katalog)
XC4VFX40-11FFG672C
✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif rujukan (tidak dalam katalog)
XC4VFX40-11FF672I Penilaian maksimum & Ciri-ciri Elektrik
| Device Type | Virtex-4 FX field-programmable gate array |
| Logic Cells | 4,656 cells |
| Process Technology | 90 nm CMOS |
| Internal Frequency | 1,028 MHz |
| Core Supply Voltage | 1.2 V |
| Logic Family | CMOS |
| Package Type | 672-pin FCBGA |
| Package Dimensions | 27 mm x 27 mm |
| Kiraan Pin | 672 pins |
| Suhu Operasi | 0°C to 85°C |
| Speed Grade | -11 |
| Jenis Pemasangan | Surface mount |
| Programmability | User-programmable FPGA |
| Family | Virtex-4 FX |
Panduan Konfigurasi Pin XC4VFX40-11FF672I 27 mm x 27 mm
Konfigurasi pin untuk XC4VFX40-11FF672I (27 mm x 27 mm pakai). IC digital ini termasuk GPIO, antaramuka komunikasi (UART, SPI, I2C), dan pin kuasa. Rujuk dokumen pengeluar untuk fungsi pin alternatif dan opsi konfigurasi. Biasa digunakan dalam rancangan sistem ter嵌入式 dan PCB.
Tiada data garisan pin yang diperoleh untuk XC4VFX40-11FF672I.
Rujuk kepada lembaran data untuk konfigurasi pin penuh.
Aplikasi Biasa
XC4VFX40-11FF672I patut untuk 6 aplikasis: Industrial Control Systems, Telecommunications Equipment, Test and Measurement, Communications and Network Processing, Embedded Signal Processing, High-Performance Instrumentation.
Industrial Control Systems
The XC4VFX40-11FF672I fits industrial controllers requiring deterministic parallel logic, multiple external interfaces, and programmable signal routing. Its 4,656 logic cells can implement protocol handling, sequencing, motion-control functions, and supervisory logic, while the 672-pin FCBGA provides extensive connections for buses, sensors, and actuators. The listed 0°C to 85°C range suits many indoor industrial environments. Designers should use the Virtex-4 family documentation to define I/O standards and power rails, and should validate system heat rise because the -11 speed grade may change dynamic power relative to a lower grade.
Disebarkan
Telecommunications Equipment
The XC4VFX40-11FF672I is appropriate for telecommunications line-card and interface-control designs that combine parallel packet processing with programmable hardware. The 4,656-cell Virtex-4 FX implementation supports protocol engines, buffering, framing, and test logic, while its high-pin-count FCBGA supports memory and external transceiver connections. The 1.2 V core supply requires a carefully partitioned power tree, and the 1,028 MHz listed internal frequency should be treated as a device capability rather than an I/O timing guarantee. Signal-integrity and power-integrity simulations are essential before PCB release.
Disebarkan
Test and Measurement
The XC4VFX40-11FF672I can implement parallel acquisition, pattern generation, digital stimulus, and analysis logic in modular test equipment. Its programmable logic resources permit reusable instrument architectures, while 672 FCBGA connections provide access to converters, memory, trigger circuitry, and communication links. The 1.2 V core and auxiliary I/O supplies must be sequenced according to the family guidelines, with dense ceramic decoupling placed close to the relevant balls. For precision analog measurements, keep FPGA digital switching separated from sensitive analog paths and use the device’s programmable I/O resources only within their specified voltage and timing limits.
Disebarkan
Communications and Network Processing
The XC4VFX40-11FF672I supports custom communications infrastructure by combining parallel datapath logic, control functions, and high-speed external connectivity. Its 4,656 logic cells are useful for packet classification, buffering, protocol translation, and hardware-assisted control, while the 672-ball package permits direct connection to memory and network transceivers. Designers should base interface performance on the selected I/O standard and timing constraints, not solely on the listed 1,028 MHz internal frequency. Constraint definition, clock topology, and board-level signal integrity can determine whether the design closes reliably.
Disebarkan
Embedded Signal Processing
The XC4VFX40-11FF672I is useful for embedded DSP and custom accelerator designs requiring flexible parallel arithmetic, local storage interfaces, and deterministic control. Its 4,656 logic cells can support fixed-point filtering, correlation, modulation, or custom video-processing pipelines, with the exact resource requirement determined by architecture and implementation. The -11 speed grade provides additional timing headroom relative to the -10 option, but that benefit must be balanced against switching power and thermal rise. Partition the design into registered pipeline stages and verify each clock domain against the Virtex-4 timing constraints.
Disebarkan
High-Performance Instrumentation
The XC4VFX40-11FF672I can serve as the digital control core in high-performance instrumentation, combining acquisition control, data movement, local-memory interfaces, and programmable logic in one 672-pin FCBGA. The device’s 1.2 V core supply supports dense logic integration, although careful rail partitioning and decoupling are needed to control supply noise. The 27 mm by 27 mm BGA also requires multilayer routing, via-in-pad considerations where appropriate, and assembly controls suitable for fine-pitch devices. Environmental and calibration requirements should be handled at the instrument level rather than inferred from the FPGA’s listed operating range.
Disebarkan
Ringkasan Produk Disebarkan
Data referensi kejuruteraan untuk XC4VFX40-11FF672I — perbandingan, panduan rancangan, dan maklumat kesediaan
Panduan Pilihan
Perbandingan dengan Gantian
| Parametr | Produk Ini | XC4VFX40-11FFG672I | XC4VFX40-12FF672I | XC4VFX40-10FF672I | XC4VFX40-11FF672C |
|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD |
| Package | 672-pin FCBGA, 27 mm x 27 mm | 672-pin FCBGA, 27 mm x 27 mm | 672-pin FCBGA | 672-pin FCBGA | 672-pin FCBGA |
| Speed Grade | -11 | -11 | -12 | -10 | -11 |
| Process Technology | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS |
| Core Supply Voltage | 1.2 V | 1.2 V | 1.2 V | 1.2 V | 1.2 V |
| Special Ordering Feature | FF672I suffix | G-marked FF672I suffix | -12 speed grade | -10 speed grade | C-marked FF672 suffix |
Penyeberangsung Jelas
- Provides a direct -11-grade option without changing the listed package architecture (vsXC4VFX40-12FF672I)
- Matches the same device resources and 672-pin FCBGA while changing only the ordering suffix (vsXC4VFX40-11FFG672I)
- Retains the -11 performance class without moving to the lower -10 grade (vsXC4VFX40-10FF672I)
Catatan Desain
Partition the 1.2 V core rail from user I/O and auxiliary supplies, and follow the Virtex-4 recommended power topology. Place the smallest bypass capacitors directly at the relevant supply balls and provide bulk capacitance near the regulator output. Validate the core rail under maximum clocking and I/O activity because switching current varies with speed grade, logic utilization, output state, and termination.
Estimate junction temperature from total FPGA dissipation, package thermal characteristics, board copper, airflow, and the actual -11 switching activity. The larger -12 grade can provide timing margin but may increase dynamic power, so it should not be substituted solely for convenience. Perform corner-case thermal analysis at the highest expected ambient temperature and account for neighboring heat sources on the 27 mm by 27 mm BGA assembly.
Design the 672-pin FCBGA layout as a high-density controlled-impedance assembly rather than treating it as a conventional perimeter package. Confirm escape-routing strategy, via geometry, solder-mask and paste apertures, assembly process support, and test access against the AMD package drawing. Keep sensitive analog or clock inputs away from high-switching FPGA outputs, and use return paths that do not cross split power planes.
Assign clocks, chip selects, high-speed buses, and configuration signals in the PCB constraints before routing. Use the -11 speed-grade timing constraints consistently in implementation and static timing analysis. If replacing the device with the -10 or -12 grade, rerun timing, power, thermal, and signal-integrity checks rather than assuming that the same PCB preserves equivalent performance or reliability.
Do not treat XC4VFX40-11FFG672I, XC4VFX40-11FF672C, or another same-footprint ordering suffix as an unconditional substitution. Check package marking, temperature class, speed grade, assembly requirements, and procurement constraints. Likewise, the listed 1,028 MHz internal frequency does not establish the operating frequency of every I/O path; each interface must satisfy its own timing and signal-integrity limits.
Maklumat Kesediaan
The FFG package-marked family variant is associated with RoHS information, but exact compliance for the target FF672I ordering code must be confirmed from its current product documentation. AEC-Q100 is not indicated for this industrial FPGA.