AMD

XC4VFX40-11FF672I - 90nm Virtex-4 FX FPGA | AMD

부품 번호: XC4VFX40-11FF672I ✓ 활성
1.2 V Vdss 672-pin FCBGA Package 1,028 MHz Speed
MOQ: 1 |

XC4VFX40-11FF672I 개요

The AMD XC4VFX40-11FF672I is a Virtex-4 FX field-programmable gate array built on a 90 nm CMOS process, with 4,656 logic cells and a listed internal frequency of 1,028 MHz. It is offered in a 672-pin FCBGA package measuring 27 mm by 27 mm, with an operating-temperature range of 0°C to 85°C. The -11 suffix denotes the device speed grade, while the final I identifies the specified temperature class.

A field-programmable gate array is a semiconductor whose digital logic, interconnect, and I/O behavior are configured after manufacture. FPGA devices sit within the broader programmable-logic hierarchy alongside CPLDs, and are used when designers need parallel processing, flexible interfaces, high-speed serial connectivity, or application-specific hardware acceleration. The Virtex-4 FX platform combines general-purpose logic resources with integrated capabilities intended for demanding embedded, communications, and signal-processing systems.

The XC4VFX40 family provides 4,656 logic cells in the configuration listed for this device. Its CMOS implementation supports a 1.2 V core supply, while user I/O and auxiliary supply requirements are defined by the family documentation. The 672-pin FCBGA package provides a substantial connection count for external memory, parallel buses, clocks, configuration signals, and high-speed I/O. The reported 1,028 MHz internal frequency represents a device-level performance figure rather than a guarantee that every I/O interface can operate at that frequency.

Configuration and system integration are central to this device’s implementation. Designers must observe the power sequencing, configuration-interface, clocking, decoupling, and I/O-standard requirements in the AMD Virtex-4 family documentation. A 27 mm by 27 mm BGA also demands careful PCB planning because solder escape routing, thermal management, and assembly process controls become more restrictive as pin pitch decreases.

Typical applications include telecommunications equipment, industrial control, test and measurement, high-speed communications, embedded signal processing, and custom accelerator logic. The large FCBGA package is most appropriate for systems that can support a complex multilayer PCB and controlled assembly process rather than low-complexity prototype boards.

The principal design trade-off is capability versus implementation effort. This FPGA offers substantial programmable logic and a high pin count, but requires careful BGA layout, robust multi-rail power delivery, thermal analysis, and validated configuration logic. Verify all speed-grade, temperature, voltage, and package details before releasing a production PCB.

This page combines device-level specifications, engineering guidance, application analysis, and same-footprint upgrade options to support FPGA selection and board design. It also highlights where changes in speed grade, temperature class, or package marking affect replacement decisions.

드롭인 대체품: XC4VFX40-11FF672I — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

이 시리즈의 변형

다음과 드롭인 호환되는 동일 시리즈 모델: XC4VFX40-11FF672I (동일 폼 팩터 및 풋프린트) — 차이점: Logic Cells, Logic Family, Package Type, Speed Grade.

AMD
Logic Cells: 41,904 cells
Logic Family: Virtex-4 FX
Package Type: 672-BBGA, FCBGA
비교 대상: XC4VFX40-11FF672I →

XC4VFX40-11FFG672I

✅ 드롭인 ⚠️ 사양 미검증
📦 FCBGA-672
Same Virtex-4 FX device, -11 speed grade, and 672-pin FCBGA; G package marking differs, while core voltage and listed logic resources are unchanged

📋 참조 대체품 (카탈로그에 없음)

XC4VFX40-12FF672I

✅ 드롭인 ⚠️ 사양 미검증
📦 FCBGA-672
Same device and 672-pin FCBGA, but -12 is one speed grade faster than -11; timing margin may improve while power can increase

📋 참조 대체품 (카탈로그에 없음)

XC4VFX40-10FF672I

✅ 드롭인 ⚠️ 사양 미검증
AMD
📦 FCBGA-672
Virtex-4 FX field-programmable gate array · 41,904 cells · 90 nm CMOS · 1.2 V · 1,028 MHz · -10 · Industrial · 672-BBGA, FCBGA

가격 문의

데이터시트 보기 →

XC4VFX40-11FF672C

✅ 드롭인 ⚠️ 사양 미검증
📦 FCBGA-672
Same Virtex-4 FX device, -11 speed grade, and 672-pin FCBGA; the C ordering suffix differs from the I suffix

📋 참조 대체품 (카탈로그에 없음)

XC4VFX40-11FFG672C

✅ 드롭인 ⚠️ 사양 미검증
📦 FCBGA-672
Same Virtex-4 FX device, -11 speed grade, and 672-pin FCBGA; G and C ordering suffixes differ from the target code

📋 참조 대체품 (카탈로그에 없음)

XC4VFX40-11FF672I 최대 정격 & 전기적 특성

Device Type Virtex-4 FX field-programmable gate array
Logic Cells 4,656 cells
Process Technology 90 nm CMOS
Internal Frequency 1,028 MHz
Core Supply Voltage 1.2 V
Logic Family CMOS
Package Type 672-pin FCBGA
Package Dimensions 27 mm x 27 mm
핀 수 672 pins
동작 온도 0°C to 85°C
Speed Grade -11
실장 유형 Surface mount
Programmability User-programmable FPGA
Family Virtex-4 FX

XC4VFX40-11FF672I 27 mm x 27 mm 핀 구성 가이드

XC4VFX40-11FF672I(27 mm x 27 mm 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.

XC4VFX40-11FF672I의 27 mm x 27 mm 패키지 핀아웃 다이어그램

다음에 대한 상세 핀아웃 데이터 없음: XC4VFX40-11FF672I.

다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.

일반적인 애플리케이션

XC4VFX40-11FF672I 적합 용도: 6 애플리케이션s: Industrial Control Systems, Telecommunications Equipment, Test and Measurement, Communications and Network Processing, Embedded Signal Processing, High-Performance Instrumentation.

🏭

Industrial Control Systems

The XC4VFX40-11FF672I fits industrial controllers requiring deterministic parallel logic, multiple external interfaces, and programmable signal routing. Its 4,656 logic cells can implement protocol handling, sequencing, motion-control functions, and supervisory logic, while the 672-pin FCBGA provides extensive connections for buses, sensors, and actuators. The listed 0°C to 85°C range suits many indoor industrial environments. Designers should use the Virtex-4 family documentation to define I/O standards and power rails, and should validate system heat rise because the -11 speed grade may change dynamic power relative to a lower grade.

🌐

Telecommunications Equipment

The XC4VFX40-11FF672I is appropriate for telecommunications line-card and interface-control designs that combine parallel packet processing with programmable hardware. The 4,656-cell Virtex-4 FX implementation supports protocol engines, buffering, framing, and test logic, while its high-pin-count FCBGA supports memory and external transceiver connections. The 1.2 V core supply requires a carefully partitioned power tree, and the 1,028 MHz listed internal frequency should be treated as a device capability rather than an I/O timing guarantee. Signal-integrity and power-integrity simulations are essential before PCB release.

🔧

Test and Measurement

The XC4VFX40-11FF672I can implement parallel acquisition, pattern generation, digital stimulus, and analysis logic in modular test equipment. Its programmable logic resources permit reusable instrument architectures, while 672 FCBGA connections provide access to converters, memory, trigger circuitry, and communication links. The 1.2 V core and auxiliary I/O supplies must be sequenced according to the family guidelines, with dense ceramic decoupling placed close to the relevant balls. For precision analog measurements, keep FPGA digital switching separated from sensitive analog paths and use the device’s programmable I/O resources only within their specified voltage and timing limits.

📡

Communications and Network Processing

The XC4VFX40-11FF672I supports custom communications infrastructure by combining parallel datapath logic, control functions, and high-speed external connectivity. Its 4,656 logic cells are useful for packet classification, buffering, protocol translation, and hardware-assisted control, while the 672-ball package permits direct connection to memory and network transceivers. Designers should base interface performance on the selected I/O standard and timing constraints, not solely on the listed 1,028 MHz internal frequency. Constraint definition, clock topology, and board-level signal integrity can determine whether the design closes reliably.

⚙️

Embedded Signal Processing

The XC4VFX40-11FF672I is useful for embedded DSP and custom accelerator designs requiring flexible parallel arithmetic, local storage interfaces, and deterministic control. Its 4,656 logic cells can support fixed-point filtering, correlation, modulation, or custom video-processing pipelines, with the exact resource requirement determined by architecture and implementation. The -11 speed grade provides additional timing headroom relative to the -10 option, but that benefit must be balanced against switching power and thermal rise. Partition the design into registered pipeline stages and verify each clock domain against the Virtex-4 timing constraints.

📟

High-Performance Instrumentation

The XC4VFX40-11FF672I can serve as the digital control core in high-performance instrumentation, combining acquisition control, data movement, local-memory interfaces, and programmable logic in one 672-pin FCBGA. The device’s 1.2 V core supply supports dense logic integration, although careful rail partitioning and decoupling are needed to control supply noise. The 27 mm by 27 mm BGA also requires multilayer routing, via-in-pad considerations where appropriate, and assembly controls suitable for fine-pitch devices. Environmental and calibration requirements should be handled at the instrument level rather than inferred from the FPGA’s listed operating range.

추천 제품 요약

XC4VFX40-11FFG672I Same-family device with equivalent package and speed grade 사용처: Industrial Control Systems, Telecommunications Equipment, Communications and Network Processing, High-Performance Instrumentation XC4VFX40-11FF672C Same-family ordering option for design review 사용처: Industrial Control Systems, Embedded Signal Processing XC4VFX60-11FF672I AMD 사용처: Telecommunications Equipment, Communications and Network Processing XC4VFX40-12FF672I Same-package faster speed grade for timing review 사용처: Test and Measurement, Embedded Signal Processing XC4VFX40-10FF672I AMD 사용처: Test and Measurement, High-Performance Instrumentation
What is the AMD XC4VFX40-11FF672I?
The AMD XC4VFX40-11FF672I is a Virtex-4 FX FPGA manufactured on a 90 nm CMOS process and configured in a 672-pin FCBGA package. The device listing identifies 4,656 logic cells, a 1,028 MHz internal frequency, a 1.2 V core supply, and an operating range of 0°C to 85°C. AMD documentation DS112 describes the Virtex-4 family and its programmable-logic, connectivity, and signal-processing architecture.
What are the key specifications of XC4VFX40-11FF672I that engineers should know?
The XC4VFX40-11FF672I combines 4,656 logic cells, a 90 nm CMOS process, and a listed 1,028 MHz internal frequency in a 27 mm by 27 mm, 672-pin FCBGA. Its core supply is 1.2 V, its speed grade is -11, and its listed operating-temperature range is 0°C to 85°C. These characteristics position it as a high-density programmable-logic device for communications, industrial, test, and embedded signal-processing systems.
Where can I download the XC4VFX40-11FF672I datasheet PDF?
The official AMD Virtex-4 family overview is available through AMD Documentation DS112 at https://docs.amd.com/v/u/en-US/ds112. Use the Virtex-4 data sheet and product-selection tables to confirm the XC4VFX40 device resources, package pinout, speed-grade limits, recommended power rails, configuration requirements, and AC/DC characteristics. The device’s exact ordering information must be checked against the 672-pin package drawing before PCB release.
Where is the XC4VFX40-11FF672I pinout located?
The XC4VFX40-11FF672I pinout is located in the pinout section of the AMD Virtex-4 data-sheet documentation, with the package drawing and ball assignment corresponding to the 672-pin FCBGA. The package SVG library supplied for this product uses a generic diagram because a canonical 672-ball BGA drawing is not available. Use the AMD package drawing and pin-definition tables for all PCB escape-routing and power assignments.
How many logic cells and pins does XC4VFX40-11FF672I have?
The XC4VFX40-11FF672I has 4,656 logic cells and 672 package pins according to its device specifications. The 672-ball FCBGA supports external memory, parallel data paths, clocks, configuration signals, and other system interfaces. These counts describe device resources and physical connections; achievable user I/O count still depends on the selected I/O standards, voltage banks, clocking requirements, and pin assignments.
What is the operating temperature range of XC4VFX40-11FF672I?
The listed operating-temperature range for the XC4VFX40-11FF672I is 0°C to 85°C. This figure identifies the temperature class used for the exact ordering code. Because the suffix and published listings can be inconsistent, engineers should confirm the final ordering code, grade marking, and production temperature requirements in the AMD Virtex-4 documentation before committing the component to a field, automotive, or industrial deployment.
Where can I buy XC4VFX40-11FF672I and what is its price?
Use the Request a Quote form on this page to request XC4VFX40-11FF672I pricing, stock confirmation, minimum order quantity, and lead time. The request should specify the exact 672-pin package, -11 speed grade, and required temperature class. Because FPGA availability and lifecycle planning can vary by production volume, confirm whether new or factory-recycled material is acceptable before placing a production order.
What is the lead time for XC4VFX40-11FF672I?
The current lead time for XC4VFX40-11FF672I should be requested through the Request a Quote form on this page. Include the annual and near-term forecast, desired package form, target inspection requirements, and whether an authorized new-device supply or factory-recycled device is acceptable. Those details allow procurement to distinguish manufacturing availability from market allocation and provide a meaningful schedule.
Is XC4VFX40-11FF672I in stock?
Stock status for the exact XC4VFX40-11FF672I ordering code must be confirmed through the Request a Quote form on this page. The component is a large 672-pin FCBGA with a -11 speed grade, so inventory should be matched against the exact suffix rather than a broader Virtex-4 FX family listing. A confirmed allocation should also include lot-traceability and assembly-quality requirements.
What can replace XC4VFX40-11FF672I?
The closest same-footprint choices are XC4VFX40-11FFG672I, XC4VFX40-11FF672C, XC4VFX40-11FFG672C, XC4VFX40-12FF672I, and XC4VFX40-10FF672I. Each uses the 672-pin FCBGA family package, but speed grade, temperature class, or package marking may differ. Confirm timing closure, power characteristics, temperature requirements, and procurement constraints before treating any of them as a drop-in substitution.
Can XC4VFX40-11FFG672I replace XC4VFX40-11FF672I?
The XC4VFX40-11FFG672I uses the same Virtex-4 FX device family, -11 speed grade, and 672-pin FCBGA construction as the XC4VFX40-11FF672I. The principal visible difference is the G package marking associated with lead-free assembly. It is therefore a strong same-footprint candidate when procurement requirements permit that marking, although current compliance and sourcing conditions should be confirmed.
Is XC4VFX40-11FF672I suitable for industrial control systems?
The XC4VFX40-11FF672I is suitable for industrial control applications when its listed 0°C to 85°C operating range covers the target enclosure temperature. Its 4,656 logic cells, 672-pin FCBGA, 1.2 V core supply, and programmable I/O resources support parallel control logic, communications interfaces, and timing functions. Confirm noise immunity, isolation, surge requirements, and industrial qualification separately at the system level.
XC4VFX40-11FF672I vs XC4VFX40-12FF672I — which is better for timing-critical designs?
The XC4VFX40-12FF672I is the higher -12 speed grade and may provide better timing margin than the -11 XC4VFX40-11FF672I. The selection should follow static timing analysis of the actual design rather than the grade number alone. Confirm power dissipation, temperature margin, availability, and cost. Existing -11 designs may require re-timing, while -12 designs may require additional power and thermal analysis.
When should I choose XC4VFX40-11FF672I over a lower speed-grade option?
Choose the XC4VFX40-11FF672I when a design needs a balanced combination of Virtex-4 FX logic capacity, the -11 speed grade, and an established 672-pin FCBGA implementation. A lower -10 grade may simplify power or sourcing plans, but it can reduce timing margin. Retain the -11 device when the implemented clocks, I/O timing, and external interfaces depend on that performance level.
What is the best AMD equivalent for XC4VFX40-11FF672I?
The best AMD equivalent depends on which attribute must remain unchanged. XC4VFX40-11FFG672I preserves the family, -11 grade, and 672-pin FCBGA while changing the package marking; XC4VFX40-12FF672I and XC4VFX40-10FF672I change the speed grade; the C-marked options change the ordering classification. For a drop-in production decision, timing, temperature, PCB footprint, and assembly marking must all match.

엔지니어링 참조 데이터: XC4VFX40-11FF672I — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose the XC4VFX40-11FF672I when a Virtex-4 FX design specifically requires the -11 speed grade, 4,656 logic cells, a 1.2 V core, and the 672-pin FCBGA implementation. XC4VFX40-11FFG672I is the closest same-footprint candidate when the G package marking is acceptable, but assembly and compliance requirements must match. Use XC4VFX40-12FF672I when additional timing margin justifies revalidating power and thermal performance. Consider XC4VFX40-10FF672I only when lower power or sourcing conditions outweigh the reduction in timing margin. The C-marked variants require careful ordering-code review because their published classifications differ. In every case, verify the final pinout, temperature grade, speed-grade timing constraints, BGA assembly process, and long-term availability before approving a substitution.

대체품과의 비교

파라미터 이 제품 XC4VFX40-11FFG672I XC4VFX40-12FF672I XC4VFX40-10FF672I XC4VFX40-11FF672C
Brand AMD AMD AMD AMD AMD
Package 672-pin FCBGA, 27 mm x 27 mm 672-pin FCBGA, 27 mm x 27 mm 672-pin FCBGA 672-pin FCBGA 672-pin FCBGA
Speed Grade -11 -11 -12 -10 -11
Process Technology 90 nm CMOS 90 nm CMOS 90 nm CMOS 90 nm CMOS 90 nm CMOS
Core Supply Voltage 1.2 V 1.2 V 1.2 V 1.2 V 1.2 V
Special Ordering Feature FF672I suffix G-marked FF672I suffix -12 speed grade -10 speed grade C-marked FF672 suffix

주요 차별점

  • Provides a direct -11-grade option without changing the listed package architecture (vs XC4VFX40-12FF672I)
  • Matches the same device resources and 672-pin FCBGA while changing only the ordering suffix (vs XC4VFX40-11FFG672I)
  • Retains the -11 performance class without moving to the lower -10 grade (vs XC4VFX40-10FF672I)

설계 노트

Partition the 1.2 V core rail from user I/O and auxiliary supplies, and follow the Virtex-4 recommended power topology. Place the smallest bypass capacitors directly at the relevant supply balls and provide bulk capacitance near the regulator output. Validate the core rail under maximum clocking and I/O activity because switching current varies with speed grade, logic utilization, output state, and termination.

Estimate junction temperature from total FPGA dissipation, package thermal characteristics, board copper, airflow, and the actual -11 switching activity. The larger -12 grade can provide timing margin but may increase dynamic power, so it should not be substituted solely for convenience. Perform corner-case thermal analysis at the highest expected ambient temperature and account for neighboring heat sources on the 27 mm by 27 mm BGA assembly.

Design the 672-pin FCBGA layout as a high-density controlled-impedance assembly rather than treating it as a conventional perimeter package. Confirm escape-routing strategy, via geometry, solder-mask and paste apertures, assembly process support, and test access against the AMD package drawing. Keep sensitive analog or clock inputs away from high-switching FPGA outputs, and use return paths that do not cross split power planes.

Assign clocks, chip selects, high-speed buses, and configuration signals in the PCB constraints before routing. Use the -11 speed-grade timing constraints consistently in implementation and static timing analysis. If replacing the device with the -10 or -12 grade, rerun timing, power, thermal, and signal-integrity checks rather than assuming that the same PCB preserves equivalent performance or reliability.

Do not treat XC4VFX40-11FFG672I, XC4VFX40-11FF672C, or another same-footprint ordering suffix as an unconditional substitution. Check package marking, temperature class, speed grade, assembly requirements, and procurement constraints. Likewise, the listed 1,028 MHz internal frequency does not establish the operating frequency of every I/O path; each interface must satisfy its own timing and signal-integrity limits.

규정 준수 정보

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
무연
Unknown
무할로겐
Unknown
분쟁 광물
Unknown

The FFG package-marked family variant is associated with RoHS information, but exact compliance for the target FF672I ordering code must be confirmed from its current product documentation. AEC-Q100 is not indicated for this industrial FPGA.

관련 검색

XC4VFX40-11FF672I datasheet XC4VFX40-11FF672I specifications XC4VFX40-11FF672I pinout XC4VFX40-11FF672I datasheet pdf AMD XC4VFX40-11FF672I XC4VFX40-11FF672I equivalent XC4VFX40-11FF672I replacement XC4VFX40-11FF672I cross reference XC4VFX40-11FF672I price XC4VFX40-11FF672I stock XC4VFX40-11FF672I vs XC4VFX40-12FF672I XC4VFX40-11FF672I FCBGA-672 footprint XC4VFX40 90nm FPGA application circuit

관련 부품 & 용어

AMD XC4VFX40-11FF672I XC4VFX40-11FFG672I XC4VFX40-12FF672I XC4VFX40-10FF672I XC4VFX40-11FF672C XC4VFX40-11FFG672C XC4VFX60-11FF672I Virtex-4 FX field-programmable gate array FPGA programmable logic device CPLD semiconductor 90 nm CMOS 4,656 logic cells 1,028 MHz 1.2 V core supply FCBGA-672 BGA package family surface-mount package lead-free package marking industrial control signal processing AMD Documentation DS112
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기