XC4VFX40-11FF672I - 90nm Virtex-4 FX FPGA | AMD
料号: XC4VFX40-11FF672I ✓ 量产中XC4VFX40-11FF672I 概述
A field-programmable gate array is a semiconductor whose digital logic, interconnect, and I/O behavior are configured after manufacture. FPGA devices sit within the broader programmable-logic hierarchy alongside CPLDs, and are used when designers need parallel processing, flexible interfaces, high-speed serial connectivity, or application-specific hardware acceleration. The Virtex-4 FX platform combines general-purpose logic resources with integrated capabilities intended for demanding embedded, communications, and signal-processing systems.
The XC4VFX40 family provides 4,656 logic cells in the configuration listed for this device. Its CMOS implementation supports a 1.2 V core supply, while user I/O and auxiliary supply requirements are defined by the family documentation. The 672-pin FCBGA package provides a substantial connection count for external memory, parallel buses, clocks, configuration signals, and high-speed I/O. The reported 1,028 MHz internal frequency represents a device-level performance figure rather than a guarantee that every I/O interface can operate at that frequency.
Configuration and system integration are central to this device’s implementation. Designers must observe the power sequencing, configuration-interface, clocking, decoupling, and I/O-standard requirements in the AMD Virtex-4 family documentation. A 27 mm by 27 mm BGA also demands careful PCB planning because solder escape routing, thermal management, and assembly process controls become more restrictive as pin pitch decreases.
Typical applications include telecommunications equipment, industrial control, test and measurement, high-speed communications, embedded signal processing, and custom accelerator logic. The large FCBGA package is most appropriate for systems that can support a complex multilayer PCB and controlled assembly process rather than low-complexity prototype boards.
The principal design trade-off is capability versus implementation effort. This FPGA offers substantial programmable logic and a high pin count, but requires careful BGA layout, robust multi-rail power delivery, thermal analysis, and validated configuration logic. Verify all speed-grade, temperature, voltage, and package details before releasing a production PCB.
This page combines device-level specifications, engineering guidance, application analysis, and same-footprint upgrade options to support FPGA selection and board design. It also highlights where changes in speed grade, temperature class, or package marking affect replacement decisions.
直接替换替代料: XC4VFX40-11FF672I ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: XC4VFX40-11FF672I (相同外形与封装尺寸) ——差异在于 Logic Cells, Logic Family, Package Type, Speed Grade.
XC4VFX40-11FFG672I
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料(不在目录中)
XC4VFX40-12FF672I
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料(不在目录中)
XC4VFX40-10FF672I
✅ 直接替换 ⚠️ 规格未核验联系询价
查看数据手册 →XC4VFX40-11FF672C
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料(不在目录中)
XC4VFX40-11FFG672C
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料(不在目录中)
XC4VFX40-11FF672I 最大额定值与电气特性
| Device Type | Virtex-4 FX field-programmable gate array |
| Logic Cells | 4,656 cells |
| Process Technology | 90 nm CMOS |
| Internal Frequency | 1,028 MHz |
| Core Supply Voltage | 1.2 V |
| Logic Family | CMOS |
| Package Type | 672-pin FCBGA |
| Package Dimensions | 27 mm x 27 mm |
| 引脚数量 | 672 pins |
| 工作温度 | 0°C to 85°C |
| Speed Grade | -11 |
| 安装类型 | Surface mount |
| Programmability | User-programmable FPGA |
| Family | Virtex-4 FX |
XC4VFX40-11FF672I 27 mm x 27 mm 引脚配置指南
XC4VFX40-11FF672I(27 mm x 27 mm 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据: XC4VFX40-11FF672I.
请参阅 数据手册 以查看完整引脚配置。
典型应用
XC4VFX40-11FF672I 适用于 6 应用s: Industrial Control Systems, Telecommunications Equipment, Test and Measurement, Communications and Network Processing, Embedded Signal Processing, High-Performance Instrumentation.
Industrial Control Systems
The XC4VFX40-11FF672I fits industrial controllers requiring deterministic parallel logic, multiple external interfaces, and programmable signal routing. Its 4,656 logic cells can implement protocol handling, sequencing, motion-control functions, and supervisory logic, while the 672-pin FCBGA provides extensive connections for buses, sensors, and actuators. The listed 0°C to 85°C range suits many indoor industrial environments. Designers should use the Virtex-4 family documentation to define I/O standards and power rails, and should validate system heat rise because the -11 speed grade may change dynamic power relative to a lower grade.
推荐
Telecommunications Equipment
The XC4VFX40-11FF672I is appropriate for telecommunications line-card and interface-control designs that combine parallel packet processing with programmable hardware. The 4,656-cell Virtex-4 FX implementation supports protocol engines, buffering, framing, and test logic, while its high-pin-count FCBGA supports memory and external transceiver connections. The 1.2 V core supply requires a carefully partitioned power tree, and the 1,028 MHz listed internal frequency should be treated as a device capability rather than an I/O timing guarantee. Signal-integrity and power-integrity simulations are essential before PCB release.
推荐
Test and Measurement
The XC4VFX40-11FF672I can implement parallel acquisition, pattern generation, digital stimulus, and analysis logic in modular test equipment. Its programmable logic resources permit reusable instrument architectures, while 672 FCBGA connections provide access to converters, memory, trigger circuitry, and communication links. The 1.2 V core and auxiliary I/O supplies must be sequenced according to the family guidelines, with dense ceramic decoupling placed close to the relevant balls. For precision analog measurements, keep FPGA digital switching separated from sensitive analog paths and use the device’s programmable I/O resources only within their specified voltage and timing limits.
推荐
Communications and Network Processing
The XC4VFX40-11FF672I supports custom communications infrastructure by combining parallel datapath logic, control functions, and high-speed external connectivity. Its 4,656 logic cells are useful for packet classification, buffering, protocol translation, and hardware-assisted control, while the 672-ball package permits direct connection to memory and network transceivers. Designers should base interface performance on the selected I/O standard and timing constraints, not solely on the listed 1,028 MHz internal frequency. Constraint definition, clock topology, and board-level signal integrity can determine whether the design closes reliably.
推荐
Embedded Signal Processing
The XC4VFX40-11FF672I is useful for embedded DSP and custom accelerator designs requiring flexible parallel arithmetic, local storage interfaces, and deterministic control. Its 4,656 logic cells can support fixed-point filtering, correlation, modulation, or custom video-processing pipelines, with the exact resource requirement determined by architecture and implementation. The -11 speed grade provides additional timing headroom relative to the -10 option, but that benefit must be balanced against switching power and thermal rise. Partition the design into registered pipeline stages and verify each clock domain against the Virtex-4 timing constraints.
推荐
High-Performance Instrumentation
The XC4VFX40-11FF672I can serve as the digital control core in high-performance instrumentation, combining acquisition control, data movement, local-memory interfaces, and programmable logic in one 672-pin FCBGA. The device’s 1.2 V core supply supports dense logic integration, although careful rail partitioning and decoupling are needed to control supply noise. The 27 mm by 27 mm BGA also requires multilayer routing, via-in-pad considerations where appropriate, and assembly controls suitable for fine-pitch devices. Environmental and calibration requirements should be handled at the instrument level rather than inferred from the FPGA’s listed operating range.
推荐
推荐产品汇总
工程参考数据: XC4VFX40-11FF672I ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | XC4VFX40-11FFG672I | XC4VFX40-12FF672I | XC4VFX40-10FF672I | XC4VFX40-11FF672C |
|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD |
| Package | 672-pin FCBGA, 27 mm x 27 mm | 672-pin FCBGA, 27 mm x 27 mm | 672-pin FCBGA | 672-pin FCBGA | 672-pin FCBGA |
| Speed Grade | -11 | -11 | -12 | -10 | -11 |
| Process Technology | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS |
| Core Supply Voltage | 1.2 V | 1.2 V | 1.2 V | 1.2 V | 1.2 V |
| Special Ordering Feature | FF672I suffix | G-marked FF672I suffix | -12 speed grade | -10 speed grade | C-marked FF672 suffix |
关键差异点
- Provides a direct -11-grade option without changing the listed package architecture (对比 XC4VFX40-12FF672I)
- Matches the same device resources and 672-pin FCBGA while changing only the ordering suffix (对比 XC4VFX40-11FFG672I)
- Retains the -11 performance class without moving to the lower -10 grade (对比 XC4VFX40-10FF672I)
设计说明
Partition the 1.2 V core rail from user I/O and auxiliary supplies, and follow the Virtex-4 recommended power topology. Place the smallest bypass capacitors directly at the relevant supply balls and provide bulk capacitance near the regulator output. Validate the core rail under maximum clocking and I/O activity because switching current varies with speed grade, logic utilization, output state, and termination.
Estimate junction temperature from total FPGA dissipation, package thermal characteristics, board copper, airflow, and the actual -11 switching activity. The larger -12 grade can provide timing margin but may increase dynamic power, so it should not be substituted solely for convenience. Perform corner-case thermal analysis at the highest expected ambient temperature and account for neighboring heat sources on the 27 mm by 27 mm BGA assembly.
Design the 672-pin FCBGA layout as a high-density controlled-impedance assembly rather than treating it as a conventional perimeter package. Confirm escape-routing strategy, via geometry, solder-mask and paste apertures, assembly process support, and test access against the AMD package drawing. Keep sensitive analog or clock inputs away from high-switching FPGA outputs, and use return paths that do not cross split power planes.
Assign clocks, chip selects, high-speed buses, and configuration signals in the PCB constraints before routing. Use the -11 speed-grade timing constraints consistently in implementation and static timing analysis. If replacing the device with the -10 or -12 grade, rerun timing, power, thermal, and signal-integrity checks rather than assuming that the same PCB preserves equivalent performance or reliability.
Do not treat XC4VFX40-11FFG672I, XC4VFX40-11FF672C, or another same-footprint ordering suffix as an unconditional substitution. Check package marking, temperature class, speed grade, assembly requirements, and procurement constraints. Likewise, the listed 1,028 MHz internal frequency does not establish the operating frequency of every I/O path; each interface must satisfy its own timing and signal-integrity limits.
合规信息
The FFG package-marked family variant is associated with RoHS information, but exact compliance for the target FF672I ordering code must be confirmed from its current product documentation. AEC-Q100 is not indicated for this industrial FPGA.