XC7A100T-1FGG676C - 101,440-Cell Artix-7 FPGA | AMD
MPN: XC7A100T-1FGG676C ✓ AktifXC7A100T-1FGG676C Ringkasan
An Artix-7 FPGA belongs to the FPGA and CPLD hierarchy, combining programmable logic fabric, configurable logic blocks, block RAM, DSP slices, programmable I/O, and dedicated configuration resources on one semiconductor. This integration allows engineers to implement control logic, interfaces, packet processing, image pipelines, and fixed-function digital systems without combining separate programmable logic and supporting devices.
The XC7A100T provides 7,925 logic array blocks, 240 DSP slices, and nearly 5 Mb of block RAM. Its 300 user I/O pins support high external connectivity for parallel buses, high-speed interfaces, and mixed signal connectivity. The 28 nm Artix-7 architecture is optimized for low power and high performance per watt, while the -1 speed grade provides a defined performance target for commercial-temperature designs.
Three package variants use the FGG676 designation, but their ordering codes can identify different speed grades, temperature grades, or lifecycle classifications. The target suffix C denotes the commercial-temperature option, while the leading -1 identifies the speed grade. Pin compatibility must be checked against the exact package pinout file, and configuration-bitstream compatibility must be confirmed before treating another ordering code as a drop-in replacement.
Typical uses include industrial image acquisition, video processing, robotics, communications infrastructure, test equipment, and embedded control systems with extensive parallel I/O. The FPGA can support simultaneous control, buffering, filtering, and protocol conversion while centralizing programmable logic in one package. External memory and high-speed transceiver or interface components may still be required when the design exceeds the device's internal resources.
PCB design should allocate a continuous ground plane, route dedicated configuration pins according to the AMD package guidance, and use the package-specific ball map when defining escape routing. Because the BGA-676 footprint is dense and ball pitches are fine, component placement, solder-mask design, via-in-pad treatment, and assembly capability should be reviewed early in the board architecture.
This product record combines the exact device identity, architecture-level resources, package details, configuration considerations, drop-in alternatives, and practical PCB guidance needed to evaluate the XC7A100T-1FGG676C before schematic capture and prototype production.
Pilihan pengganti yang segera untuk XC7A100T-1FGG676C — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.
Varietas dalam siri ini
Model serupa yang kompatibel dengan pengganti yang segera XC7A100T-1FGG676C (sama faktor bentuk dan kaki) — berbeza dalam Core Supply Voltage, Package, Temperature Grade.
XC7A100T-1FGG676I
✅ Masuk Drop-In ⚠️ Spesifikasi Tidak DisahkanHubungi untuk harga
Lihat Datasheet →XC7A100T-2FGG676C
✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif rujukan (tidak dalam katalog)
XC7A100T-1FGG676E
✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif rujukan (tidak dalam katalog)
XC7A100T-2FGG676E
✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif rujukan (tidak dalam katalog)
XC7A100T-1FGG676C Penilaian maksimum & Ciri-ciri Elektrik
| FPGA Family | Artix-7 |
| Logic Cells | 101,440 cells |
| Logic Array Blocks | 7,925 LABs |
| Block RAM | 4,976,640 bits |
| DSP Slices | 240 slices |
| User I/O Pins | 300 pins |
| Kemasan | 676-ball FGG676 BGA, 27 mm x 27 mm |
| Process Technology | 28 nm |
| Speed Grade | -1 |
| Temperature Grade | Commercial |
| Suhu Hubungan Operasi | 0 °C to 85 °C |
| Core Supply Voltage | 0.95 V to 1.05 V |
| Configuration Memory | 4,976,640 bits |
| I/O Type | User-programmable |
| Jenis Pemasangan | Surface-mount BGA |
| Package Ball Count | 676 balls |
Panduan Konfigurasi Pin XC7A100T-1FGG676C 676 balls
Konfigurasi pin untuk XC7A100T-1FGG676C (676 balls pakai). IC digital ini termasuk GPIO, antaramuka komunikasi (UART, SPI, I2C), dan pin kuasa. Rujuk dokumen pengeluar untuk fungsi pin alternatif dan opsi konfigurasi. Biasa digunakan dalam rancangan sistem ter嵌入式 dan PCB.
Tiada data garisan pin yang diperoleh untuk XC7A100T-1FGG676C.
Rujuk kepada lembaran data untuk konfigurasi pin penuh.
Aplikasi Biasa
XC7A100T-1FGG676C patut untuk 6 aplikasis: Industrial Machine Vision, Video Processing, Industrial Communications Gateway, Robotics Control Platform, Test and Measurement Equipment, Aerospace Ground-Support Equipment.
Industrial Machine Vision
The XC7A100T-1FGG676C fits industrial machine-vision systems that combine parallel camera capture, preprocessing, buffering, and control in one programmable device. Its 101,440 logic cells and 240 DSP slices provide room for pixel pipelines and fixed-point filtering, while 300 user I/O pins support camera data, encoders, triggers, and machine-control signals. The 4,976,640 bits of block RAM can hold line buffers and working images when external memory is unnecessary. Designers should use the -1 timing limits during pipeline analysis, validate worst-case I/O timing, and include the commercial 0 °C to 85 °C junction range in the enclosure thermal assessment.
Disebarkan
Video Processing
The XC7A100T-1FGG676C can implement multi-stage video processing where parallel arithmetic, line buffering, and control logic must operate concurrently. The 240 DSP slices support multiply-accumulate operations, the 7,925 LABs accommodate control and datapath logic, and the large block-RAM capacity supports frame or line storage. Its 300 user I/O positions are useful for parallel pixel interfaces, although high-resolution serial video normally requires external PHY components. System timing should be evaluated for the -1 speed grade, and the power estimate should include switching activity at video clock rates because utilization-dependent dynamic power can materially affect cooling requirements.
Disebarkan
Industrial Communications Gateway
The XC7A100T-1FGG676C is suitable for a communications gateway that must terminate several parallel protocols while buffering packets and maintaining deterministic control. Programmable logic can implement protocol conversion, framing, filtering, and supervisory functions, while the 240 DSP slices and 4,976,640 block-RAM bits support data movement and signal-processing tasks. The 300 user I/O pins allow direct connection to multiple bus-oriented transceivers without an external CPLD. Designers should calculate timing margins for the selected -1 speed grade, use the AMD device map for every ball assignment, and isolate high-speed transceiver routes from sensitive configuration and reference circuitry.
Disebarkan
Robotics Control Platform
The XC7A100T-1FGG676C can centralize robotic motion control, sensor fusion, safety interlocks, and communication tasks within a single Artix-7 device. Its 101,440 logic cells allow deterministic control logic to coexist with complex state machines, while the DSP slices can support filtering or fixed-point transforms on motion and environmental data. With 300 user I/O pins, the device can connect encoders, resolvers, sensors, actuators, and industrial networks through suitable external interfaces. Timing closure should include worst-case routing delays, and firmware or configuration management should include checksum verification, recovery after power loss, and controlled reconfiguration for field-updatable systems.
Disebarkan
Test and Measurement Equipment
The XC7A100T-1FGG676C is a useful controller for test and measurement equipment requiring parallel acquisition, pattern generation, timing control, and analysis in one device. Its 7,925 LABs can implement multiple channels of acquisition control, while 240 DSP slices and abundant block RAM support filtering, correlation, or waveform analysis. The 300 user I/O pins provide connectivity to parallel converters, memory, and trigger circuitry, subject to the exact bank voltage and pin-function constraints in the package map. For laboratory instruments, validate channel-to-channel skew, use the FGG676 power and ground-ball assignments, and estimate both static and activity-dependent power for the final instrument operating profile.
Disebarkan
Aerospace Ground-Support Equipment
The XC7A100T-1FGG676C can be evaluated for aerospace ground-support equipment when the required environmental class permits commercial-temperature operation. Its large programmable fabric supports redundant logic, telemetry processing, simulation, and interface conversion, while 300 I/O positions simplify integration with legacy parallel equipment. Because the ordering code is not an automotive-qualified variant, the complete system must address the aerospace program's environmental, reliability, traceability, and configuration-control requirements independently. Engineers should use the exact AMD package files for layout, compare -1 timing data against the system clock plan, and build configuration redundancy rather than relying on a single boot path.
Disebarkan
Ringkasan Produk Disebarkan
Data referensi kejuruteraan untuk XC7A100T-1FGG676C — perbandingan, panduan rancangan, dan maklumat kesediaan
Panduan Pilihan
Perbandingan dengan Gantian
| Parametr | Produk Ini | XC7A100T-2FGG676I | XC7A100T-1FGG676I | XC7A100T-2FGG676C | XC7A100T-1FGG676E | XC7A100T-2FGG676E |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | 676-ball FGG676 BGA | 676-ball FGG676 BGA | 676-ball FGG676 BGA | 676-ball FGG676 BGA | 676-ball FGG676 BGA | 676-ball FGG676 BGA |
| FPGA Family | Artix-7 | Artix-7 | Artix-7 | Artix-7 | Artix-7 | Artix-7 |
| Logic Cells | 101,440 cells | 101,440 cells | 101,440 cells | 101,440 cells | 101,440 cells | 101,440 cells |
| Block RAM | 4,976,640 bits | 4,976,640 bits | 4,976,640 bits | 4,976,640 bits | 4,976,640 bits | 4,976,640 bits |
| DSP Slices | 240 slices | 240 slices | 240 slices | 240 slices | 240 slices | 240 slices |
| User I/O Pins | 300 pins | 300 pins | 300 pins | 300 pins | 300 pins | 300 pins |
| Speed Grade | -1 | -2 | -1 | -2 | -1 | -2 |
| Process Technology | 28 nm | 28 nm | 28 nm | 28 nm | 28 nm | 28 nm |
Penyeberangsung Jelas
- Commercial-temperature -1 device with substantial Artix-7 resources (vsXC7A100T-2FGG676I)
- Lower speed grade supports cost-sensitive designs meeting -1 timing limits (vsXC7A100T-2FGG676C)
- Exact commercial-temperature ordering option (vsXC7A100T-1FGG676I)
Catatan Desain
Use the AMD FGG676 package pinout file as the controlling source for every ball assignment and PCB footprint. The 676-ball BGA includes signal, power, ground, configuration, and dedicated-function balls, so the 300 user I/O count does not describe the physical pad count. Compare the land pattern, solder-mask opening, paste stencil, and assembly process against the selected package drawing before releasing fabrication outputs.
Build the power estimate around actual clock, I/O activity, LUT occupancy, DSP use, block-RAM use, and the selected core voltage rather than a fixed wattage. Decouple each required supply rail according to the AMD power-guidance document, place bulk and local decoupling at the associated BGA power balls, and keep switching-current return paths short. Review the estimate again after implementation because utilization changes can materially change dynamic power.
Plan configuration pins, dedicated pins, supply balls, and ground balls before placing general-purpose user I/O. Use the package-specific escape strategy for a 27 mm by 27 mm FGG676 footprint, preserve uninterrupted ground reference planes, and avoid routing sensitive signals across split planes. PCB assembly capability should be checked for the ball pitch, solder-mask definition, via strategy, and required X-ray inspection coverage.
Do not treat every FGG676 ordering code as automatically interchangeable. The speed grade, temperature class, lifecycle status, and exact package documentation must match the design requirements. Also do not infer the pinout from the number of user I/O pins. Download the exact device map, verify configuration pin requirements, and confirm that the replacement device identifier is supported by the selected configuration memory and tool flow.
Maklumat Kesediaan
Material-compliance status is not stated for the exact ordering code. The commercial-temperature device is not an explicitly automotive-qualified ordering option.