XC7A200T-3FBG676E - 215K Logic Cell Artix-7 FPGA | AMD
MPN: XC7A200T-3FBG676E ✓ AktifXC7A200T-3FBG676E Ringkasan
An FPGA is a semiconductor whose internal logic, interconnects, and digital signal-processing resources are configured after manufacture. The Artix-7 family belongs to the broader programmable-logic hierarchy: FPGA, programmable logic device, digital semiconductor, and embedded processing platform. Unlike a fixed-function ASIC, an Artix-7 FPGA allows board designers to implement parallel interfaces, control logic, video pipelines, communications links, and hardware accelerators while retaining reprogrammability.
The XC7A200T provides 33,650 adaptive logic modules and 13.46 Mbit of block RAM. Its 400 I/O resources support high pin-count board architectures, while dedicated resources include digital signal processing slices, programmable I/O, clock management, and memory interfaces. These characteristics make the device suitable for embedded vision, industrial control, test equipment, network-interface preprocessing, and high-throughput data-acquisition systems.
The device is identified as a 28 nm FPGA with a 1 V core-voltage description and a -3 performance grade. Artix-7 devices are positioned for low-power, cost-sensitive systems compared with larger AMD/Xilinx families, while retaining substantial parallelism and general-purpose I/O. The exact clock, transceiver, I/O-standard, and power characteristics depend on the selected package, bank configuration, speed grade, and design implementation.
Typical uses include camera-image preprocessors, programmable logic controllers, protocol bridges, industrial test heads, robotics coordination, and embedded signal-processing platforms. For designs migrating among XC7A200T speed grades, the FBG676 land pattern and device resources remain central, but timing constraints, power characteristics, temperature suitability, and qualification requirements must be checked before substituting a grade.
PCB planning should include a heat-spreader solution appropriate for the BGA thermal design, clean power and ground distribution, and controlled-length routing for high-speed interfaces. Use the Artix-7 package pinout files and UG475 when assigning all 676 balls, and run Vivado timing and DRC checks for the exact production MPN before fabrication.
This product page combines the XC7A200T resource summary, compatible FBG676 speed-grade alternatives, package-aware comparison data, and practical FPGA design guidance to support early architecture selection and sourcing decisions.
Pilihan pengganti yang segera untuk XC7A200T-3FBG676E — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.
Varietas dalam siri ini
Model serupa yang kompatibel dengan pengganti yang segera XC7A200T-3FBG676E (sama faktor bentuk dan kaki) — berbeza dalam Package, Block RAM, Speed Grade, Logic Cells, Mounting Type.
XC7A200T-1FBG676E
✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif rujukan (tidak dalam katalog)
XC7A200T-2FBG676E
✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif rujukan (tidak dalam katalog)
XC7A200T-L2FBG676E
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
XC7A200T-2FBG676I
✅ Masuk Drop-In✓ Ada di Stok
$100 / Unit
Lihat Datasheet →XC7A200T-1FBG676I
✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan✓ Ada di Stok
$390 / Unit
Lihat Datasheet →XC7A200T-3FBG676E Penilaian maksimum & Ciri-ciri Elektrik
| FPGA Family | Artix-7 |
| Device Type | Artix-7 field-programmable gate array |
| Logic Cells | 215,360 cells |
| Adaptive Logic Modules | 33,650 ALMs |
| LAB/CLB Count | 16,825 logic cells |
| Block RAM | 13,455,360 bits (12.83 Mbit) |
| User I/O | 400 I/O |
| Process Technology | 28 nm |
| Core Voltage | 1 V |
| Speed Grade | -3 |
| Kemasan | 676-BBGA FCBGA |
| Package Pin Count | 676 pins |
| Jenis Pemasangan | Surface mount |
| Programmable Logic | Configurable digital logic and interconnect fabric |
| Embedded Memory | Block RAM integrated in the FPGA fabric |
| Clock Management | Integrated clock-management resources |
| Digital Signal Processing | Integrated DSP resources |
Panduan Konfigurasi Pin XC7A200T-3FBG676E 676 pins
Konfigurasi pin untuk XC7A200T-3FBG676E (676 pins pakai). IC digital ini termasuk GPIO, antaramuka komunikasi (UART, SPI, I2C), dan pin kuasa. Rujuk dokumen pengeluar untuk fungsi pin alternatif dan opsi konfigurasi. Biasa digunakan dalam rancangan sistem ter嵌入式 dan PCB.
Tiada data garisan pin yang diperoleh untuk XC7A200T-3FBG676E.
Rujuk kepada lembaran data untuk konfigurasi pin penuh.
Aplikasi Biasa
XC7A200T-3FBG676E patut untuk 6 aplikasis: Industrial Vision Preprocessing, High-Speed Data Acquisition, Programmable Logic Controller, Communications Protocol Bridge, Test and Measurement, Robotics and Embedded Control.
Industrial Vision Preprocessing
The XC7A200T-3FBG676E fits industrial vision preprocessing because its 215,360 logic cells can implement parallel pixel pipelines while 13,455,360 RAM bits provide line buffers and multi-frame working storage. Its 400 I/O support camera interfaces, parallel sensors, and data-routing logic without relying on an external processor for every image operation. The device can execute color conversion, thresholding, feature detection, and data reduction in parallel. Designers should use the -3 timing margin for demanding pixel clocks, confirm the selected I/O standard, and validate thermal performance with Vivado power analysis and board-level measurements.
Disebarkan
High-Speed Data Acquisition
The XC7A200T-3FBG676E is suitable for parallel data-acquisition systems requiring deterministic logic and local buffering. Its 33,650 adaptive logic modules can implement multiple ADC channels, digital filters, calibration tables, and packing engines, while 13,455,360 RAM bits support sample storage and descriptor processing. The 400 I/O allow direct connection to high-pin-count converters or parallel buses when their supported interface standards align with the design. Timing closure should be based on actual sampling rates and I/O timing budgets rather than logic-cell count alone, with board-level skew and channel-to-channel matching verified after implementation.
Disebarkan
Programmable Logic Controller
The XC7A200T-3FBG676E can implement a high-performance machine controller that combines deterministic sequencing, communication adaptation, and local signal processing. Its 215,360 logic cells allow multiple concurrent control domains, while the integrated RAM supports state history, diagnostics, and motion-command queues. The 400 I/O are useful for connecting encoders, sensor buses, actuators, and machine-safety monitoring logic. For industrial equipment, select the temperature grade appropriate to the enclosure and validate timing across temperature. Power-sensitive machines may benefit from evaluating XC7A200T-L2FBG676E as a lower-power speed-grade alternative.
Disebarkan
Communications Protocol Bridge
The XC7A200T-3FBG676E is appropriate for protocol bridges that must translate interfaces, buffer packets, and resolve timing differences in hardware. Its programmable fabric can support multiple concurrent channels, and its 13,455,360 RAM bits can hold descriptors, frame buffers, and lookup tables. The -3 grade provides additional timing margin for demanding serial, parallel, or memory-facing logic, while 400 I/O allow dense connectivity among transceivers and processors. Interface electrical standards, clock-domain-crossing structures, and maximum supported transceiver rates must be selected from the device documentation. A swap between speed grades should always be followed by fresh Vivado timing analysis.
Disebarkan
Test and Measurement
The XC7A200T-3FBG676E fits programmable test systems requiring parallel stimulus generation, real-time pattern processing, and flexible I/O. The 215,360 logic cells support multiple test channels, sequencing engines, and analysis pipelines, while the large block-RAM capacity accommodates captured data and reference patterns. Its 400 I/O can simplify connections to instruments and custom test fixtures when the selected I/O standards match. For timing-sensitive instruments, use the -3 grade and account for package and board skew during implementation. Calibration, reference-clock jitter, and high-speed channel behavior should be characterized on hardware because they are not determined by the logic-cell total.
Disebarkan
Robotics and Embedded Control
The XC7A200T-3FBG676E can coordinate robotics subsystems by executing motion planning, sensor fusion preprocessing, and real-time interface logic in parallel. Its 13,455,360 RAM bits support trajectory buffers, sensor history, and diagnostic records, while 215,360 logic cells provide capacity for multiple coordinated control paths. The 400 I/O allow integration of encoders, cameras, industrial networks, and actuator drivers through suitable I/O standards. Designers should partition logic into deterministic clock domains, reserve timing margin for sensor-to-actuator latency, and assess the BGA thermal solution before increasing operating frequency. The lower-power L2 grade may suit battery- or thermally constrained mobile platforms.
Disebarkan
Ringkasan Produk Disebarkan
Data referensi kejuruteraan untuk XC7A200T-3FBG676E — perbandingan, panduan rancangan, dan maklumat kesediaan
Panduan Pilihan
Perbandingan dengan Gantian
| Parametr | Produk Ini | XC7A200T-1FBG676E | XC7A200T-2FBG676E | XC7A200T-L2FBG676E | XC7A200T-2FBG676I | XC7A200T-1FBG676I |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | 676-BBGA (FCBGA) | 676-BBGA (FCBGA) | 676-BBGA (FCBGA) | 676-BBGA (FCBGA) | 676-BBGA (FCBGA) | 676-BBGA (FCBGA) |
| FPGA Family | Artix-7 | Artix-7 | Artix-7 | Artix-7 | Artix-7 | Artix-7 |
| Logic Cells | 215,360 cells | 215,360 cells | 215,360 cells | 215,360 cells | 215,360 cells | 215,360 cells |
| Adaptive Logic Modules | 33,650 ALMs | 33,650 ALMs | 33,650 ALMs | 33,650 ALMs | 33,650 ALMs | 33,650 ALMs |
| Block RAM | 12.83 Mbit | 12.83 Mbit | 12.83 Mbit | 12.83 Mbit | 12.83 Mbit | 12.83 Mbit |
| User I/O | 400 I/O | 400 I/O | 400 I/O | 400 I/O | 400 I/O | 400 I/O |
| Process Technology | 28 nm | 28 nm | 28 nm | 28 nm | 28 nm | 28 nm |
| Speed and Temperature Grade | -3, E suffix | -1, E suffix | -2, E suffix | -L2, E suffix | -2, I suffix | -1, I suffix |
Penyeberangsung Jelas
- Higher speed grade within the same XC7A200T resource configuration (vsXC7A200T-2FBG676E)
- Performance-oriented grade versus the low-power L2 option (vsXC7A200T-L2FBG676E)
- Extended-temperature suffix retained for industrial-qualified migration paths (vsXC7A200T-2FBG676E)
Catatan Desain
Plan the 676-BBGA thermal path before committing to board construction. Place the FPGA according to the package drawing, provide a continuous ground reference beneath the device, and use the specified BGA footprint rather than a generic land pattern. Calculate junction rise from estimated device power and the package thermal model, then size the PCB copper or heat-spreader interface for the maximum ambient condition. Validate the estimate on assembled hardware because utilization, airflow, and neighboring components can change the final temperature.
Use the FBG676 package files when assigning power, ground, configuration, clock, and user I/O balls. Decoupling and power-plane transitions must follow the AMD power-guidance recommendations, with especially low-impedance connections for core and I/O supplies. Verify every ball against the exact XC7A200T device because speed and temperature suffixes do not alter the package name but can alter operating limits. Run package DRC, power-plane checks, and assembly-capability analysis before releasing the PCB.
Do not treat an XC7A200T speed-grade change as automatically timing-safe. Generate the bitstream with the production MPN selected in Vivado, rerun static timing analysis at the intended clock targets, and inspect any timing exceptions. A lower speed grade can require additional pipeline stages or relaxed external timing, while a temperature-grade change can alter operating conditions. Also reject packages such as FGG676 or RB676 as direct replacements unless the board and pinout have been formally redesigned.
Budget external interface timing from the actual package and board, not only from the FPGA fabric capacity. For high-speed I/O, use the speed-grade-specific timing data, account for package variation, channel skew, connector loss, and clock jitter, and preserve return paths through the PCB stack-up. Implement source-synchronous interfaces with matched routing where required and validate eye margin through post-layout simulation or measurement. The 400 I/O count provides connectivity but does not guarantee equal timing performance across every supported I/O standard.
Maklumat Kesediaan
The exact environmental and material-compliance declarations for this orderable MPN were not identified in the cited manufacturer or distributor records. AEC-Q100 is not applicable because the XC7A200T is an FPGA rather than an automotive semiconductor qualified under that program.