XC7K160T-1FFG676I - 162K Kintex-7 FPGA | AMD Xilinx
MPN: XC7K160T-1FFG676I ✓ AktifXC7K160T-1FFG676I Ringkasan
A Kintex-7 FPGA is a semiconductor device whose programmable logic fabric, block RAM, DSP resources, programmable I/O, and dedicated configuration pins can be configured after manufacture. Within the FPGA hierarchy, Kintex-7 devices sit between lower-cost Artix-7 devices and higher-density UltraScale devices, combining substantial logic, memory, DSP, and high-speed I/O resources for communications, industrial control, instrumentation, and embedded processing.
The device provides 12,675 configurable logic blocks, 11,700 Kb of block RAM, and 600 DSP slices. Its -1 speed grade identifies the performance class, while the FFG676 suffix identifies the 676-ball package configuration. The industrial I suffix supports operation across the stated -40 °C to 100 °C junction-temperature range. A nominal 1 V core-related supply figure is associated with this device family, although complete power planning must follow the AMD/Xilinx power, configuration, and package guidance.
The Kintex-7 architecture combines hard DSP slices, dual-port block RAM, high-speed serial transceivers, dedicated clock-management resources, and selectable I/O standards. These resources allow parallel logic, filtering, waveform generation, packet handling, and interface bridging to be consolidated in one device. The 400 user I/Os support substantial board-level connectivity, while the programmable fabric can implement application-specific control, datapaths, and protocol engines.
Typical uses include industrial automation, test and measurement, high-speed data acquisition, communications infrastructure, embedded signal processing, video processing, and secure control systems. The 27 nm Kintex-7 architecture is particularly useful where designers need more logic, RAM, and DSP capacity than a smaller FPGA while retaining a large BGA package with ample I/O.
PCB implementation requires a multilayer board with carefully controlled power distribution, ground-plane continuity, ball-escape routing, and high-speed design rules. Decoupling, configuration-bank handling, clocking, and JTAG access should be planned from the outset. Because the FFG676 land pattern is dense and device-specific, use the AMD/Xilinx pinout and PCB design guidance when assigning power, ground, configuration, and high-speed differential pairs.
This page combines the key device identity, package characteristics, resource counts, drop-in speed-grade options, application guidance, and PCB considerations needed to evaluate the XC7K160T-1FFG676I for a new Kintex-7 design.
Pilihan pengganti yang segera untuk XC7K160T-1FFG676I — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.
Varietas dalam siri ini
Model serupa yang kompatibel dengan pengganti yang segera XC7K160T-1FFG676I (sama faktor bentuk dan kaki) — berbeza dalam Package, Logic Cells, Speed Grade, Process Technology, Maximum Clock Frequency.
XC7K160T-2FFG676I
✅ Masuk Drop-InHubungi untuk harga
Lihat Datasheet →XC7K160T-3FFG676E
✅ Masuk Drop-InHubungi untuk harga
Lihat Datasheet →XC7K160T-2FFG676E
✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif rujukan (tidak dalam katalog)
XC7K160T-3FFG676I
✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif rujukan (tidak dalam katalog)
XC7K160T-1FFG676E
✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif rujukan (tidak dalam katalog)
XC7K160T-1FFG676I Penilaian maksimum & Ciri-ciri Elektrik
| FPGA Family | Kintex-7 |
| Logic Cells | 162,240 cells |
| Configurable Logic Blocks | 12,675 CLBs |
| Block RAM | 11,980,800 bits |
| DSP Slices | 600 slices |
| User I/O | 400 I/Os |
| Frekuensi Klock Maksimum | 1098 MHz |
| Process Technology | 28 nm CMOS |
| Core Supply Voltage | 1 V |
| Speed Grade | -1 |
| Device Type | Kintex-7 FPGA |
| Kemasan | 676-pin FCBGA, 27 × 27 mm |
| Package Designation | FFG676 |
| Suhu Hubungan Operasi | -40 °C to 100 °C |
| Temperature Grade | Industrial |
| Jenis Pemasangan | Surface Mount |
| Programmable Logic | 162,240 programmable logic cells |
Panduan Konfigurasi Pin XC7K160T-1FFG676I ffg676
Konfigurasi pin untuk XC7K160T-1FFG676I (ffg676 pakai). IC digital ini termasuk GPIO, antaramuka komunikasi (UART, SPI, I2C), dan pin kuasa. Rujuk dokumen pengeluar untuk fungsi pin alternatif dan opsi konfigurasi. Biasa digunakan dalam rancangan sistem ter嵌入式 dan PCB.
Tiada data garisan pin yang diperoleh untuk XC7K160T-1FFG676I.
Rujuk kepada lembaran data untuk konfigurasi pin penuh.
Aplikasi Biasa
XC7K160T-1FFG676I patut untuk 6 aplikasis: Industrial Automation and Control, High-Speed Data Acquisition, Communications and Protocol Processing, Digital Signal Processing, Test and Measurement, Embedded Video Processing.
Industrial Automation and Control
The XC7K160T-1FFG676I is well suited to industrial controllers because it combines 162,240 logic cells, 600 DSP slices, and an industrial -40 °C to 100 °C junction-temperature range. It can implement motion sequencing, machine vision preprocessing, industrial protocol bridges, and real-time control logic in one package. The -1 speed grade supports designs that need substantial parallelism without requiring the higher timing class of a -2 device. Engineers should use the FFG676 power map, establish clean auxiliary and I/O rails, and complete timing and thermal analysis for the target enclosure.
Disebarkan
High-Speed Data Acquisition
For high-speed acquisition systems, the XC7K160T-1FFG676I provides 400 user I/Os, 11,980,800 block RAM bits, and 600 DSP slices for parallel capture, buffering, filtering, and format conversion. Parallel data paths can be organized across configurable logic blocks while DSP slices perform multiply-accumulate operations common in digital filtering. The large FCBGA package also provides many user connections, although the 27 × 27 mm land pattern demands careful ball-escape routing. Signal-integrity checks, source-synchronous interfaces, clock jitter, and thermal performance should be validated before high-rate operation.
Disebarkan
Communications and Protocol Processing
The XC7K160T-1FFG676I can consolidate communications control, packet buffering, classification, and line-rate data processing in a single Kintex-7 device. Its 162,240 logic cells support parallel protocol engines, while 11,980,800 RAM bits can hold packet queues and lookup structures. The 600 DSP slices can accelerate filters and transforms in software-defined radio or test-equipment data paths. Designers should use the appropriate high-speed I/O resources, constrain input and output delays, and confirm that the selected -1 speed grade closes timing at the required clock and data rates.
Disebarkan
Digital Signal Processing
The XC7K160T-1FFG676I is appropriate for fixed-point filtering, FFT, modulation, demodulation, and waveform-generation systems because its 600 DSP slices provide dedicated arithmetic resources alongside 162,240 logic cells. Large block RAM banks support sample storage, coefficient tables, and multi-buffer data paths. Partitioning arithmetic across DSP slices can improve throughput, but memory inference, pipeline latency, and DSP cascade use must be reviewed in the implementation results. Power and temperature checks are particularly important because sustained DSP activity can raise junction temperature above the level predicted from logic utilization alone.
Disebarkan
Test and Measurement
In automated test equipment, the XC7K160T-1FFG676I can implement pattern generation, real-time analysis, timing checks, and instrument-control logic within one programmable device. Its large RAM capacity supports long capture buffers, while the DSP slices accelerate filtering and mathematical operations. The industrial temperature range supports use in controlled industrial environments, but final ambient limits depend on board cooling and enclosure conditions. Design teams should separate sensitive analog supplies from FPGA rails, provide deterministic clocking, and use boundary-scan access for production testing and board bring-up.
Disebarkan
Embedded Video Processing
The XC7K160T-1FFG676I can support image acquisition, pixel transformation, color processing, and interface bridging in embedded vision equipment. Its 400 I/Os provide board-level connectivity, 162,240 logic cells implement control and datapaths, and 600 DSP slices accelerate multiplication-heavy pixel operations. The -1 industrial-grade device is suitable for production systems operating across the specified junction-temperature range when adequate cooling is designed into the assembly. Clock-domain crossings, video timing constraints, memory bandwidth, and the FFG676 escape-routing strategy require careful Vivado and PCB planning.
Disebarkan
Ringkasan Produk Disebarkan
Data referensi kejuruteraan untuk XC7K160T-1FFG676I — perbandingan, panduan rancangan, dan maklumat kesediaan
Panduan Pilihan
Perbandingan dengan Gantian
| Parametr | Produk Ini | XC7K160T-2FFG676I | XC7K160T-3FFG676E | XC7K160T-2FFG676E | XC7K160T-3FFG676I | XC7K160T-1FFG676E |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | 676-FCBGA (FFG676) | 676-FCBGA (FFG676) | 676-FCBGA (FFG676) | 676-FCBGA (FFG676) | 676-FCBGA (FFG676) | 676-FCBGA (FFG676) |
| FPGA Family | Kintex-7 | Kintex-7 | Kintex-7 | Kintex-7 | Kintex-7 | Kintex-7 |
| Speed Grade | -1 | -2 | -3 | -2 | -3 | -1 |
| Temperature Grade | Industrial | Industrial | Commercial | Commercial | Industrial | Commercial |
| Logic Cells | 162,240 cells | 162,240 cells | 162,240 cells | 162,240 cells | 162,240 cells | 162,240 cells |
Penyeberangsung Jelas
- Matches the -1 speed requirement while offering a commercial-temperature same-footprint option (vsXC7K160T-1FFG676E)
- Lower speed class can reduce the performance margin needed for timing closure (vsXC7K160T-2FFG676I)
- Industrial qualification is retained across a higher-speed option (vsXC7K160T-3FFG676I)
- Broader temperature suitability distinguishes the target from the E-suffix alternatives (vsXC7K160T-3FFG676E)
Catatan Desain
Design the core, auxiliary, configuration, and I/O supplies as a coordinated multi-rail system. Follow the manufacturer power guide for voltage tolerances, sequencing, current limits, and decoupling values rather than treating the 1 V device figure as a complete power specification. Place bulk capacitance near the power-entry structure and high-frequency ceramic decoupling close to the relevant BGA balls. Verify droop during configuration and high-speed I/O activity because simultaneous dynamic current changes can produce rail coupling even when average current is acceptable.
The 27 × 27 mm FFG676 package requires multilayer PCB construction, laser or microvia escape routing, and uninterrupted reference-plane return paths. Assign every power, ground, configuration, clock, and user-I/O ball from the manufacturer FFG676 pin table. Maintain symmetry and length matching for high-speed differential pairs, avoid routing over plane splits, and use the manufacturer's recommended ball-pitch and via rules. A completed stack-up and signal-integrity simulation should precede fabrication because small geometry variations can materially affect high-speed edges.
Thermal design should include the dynamic power of configured logic, block RAM, DSP slices, high-speed I/O, and the device's static configuration-dependent power. Use the manufacturer power estimator with realistic activity factors, then remove the calculated heat through board vias, copper planes, and enclosure airflow or conduction. Junction temperature must remain within the -40 °C to 100 °C industrial rating under worst-case ambient conditions. Validate the assembled board because package thermal performance depends strongly on PCB thickness, via density, copper coverage, and neighboring heat sources.
Do not substitute a different FBG, FFG, speed, or temperature suffix solely because the ball count matches. The package suffix can alter ball assignments, I/O composition, power architecture, or environmental qualification. Likewise, a higher speed grade may change timing without preserving the original power budget. Before replacing the XC7K160T-1FFG676I, compare the exact manufacturer pin tables, bank voltages, timing specifications, configuration behavior, temperature range, and thermal requirements, then rerun synthesis, implementation, and timing analysis with the selected MPN.
Apply source-synchronous, chip-to-chip, and board-routing constraints using the selected speed grade's timing data. Separate clocks from aggressive switching data where practical, control reference-plane return paths, and treat configuration pins as signal-integrity-sensitive nets. For interfaces using dedicated high-speed balls, follow the manufacturer guidance on connectivity, termination, and layer transitions. Post-route timing and signal-integrity checks should cover worst-case speed-grade corner, temperature, supply, and process conditions rather than relying only on the nominal implementation report.
Maklumat Kesediaan
No definitive RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statement was established for the exact MPN.