XMC4700F100K2048AAXQMA1 - 144MHz Cortex-M4 MCU | Infineon
MPN: XMC4700F100K2048AAXQMA1 ✓ AktifXMC4700F100K2048AAXQMA1 Ringkasan
An industrial microcontroller is a semiconductor device designed to execute embedded control, monitoring, and communications functions in equipment operating under sustained environmental and availability requirements. The XMC4700 combines a 32-bit Arm Cortex-M4 processing core with embedded memory and Ethernet peripherals in one device. In the product hierarchy, it belongs to the microcontroller class, within semiconductor and embedded-processing devices.
Core features include 144 MHz maximum operation, 2048 kB Flash, 352 kB SRAM, 32-bit architecture, and integrated Ethernet. The embedded Flash provides 2 Mbit of nonvolatile program storage, while the 352 kB SRAM provides working memory for control algorithms, protocol stacks, diagnostics, and communications buffers. The 100-pin LQFP-100 package also supports a compact surface-mount implementation for industrial controller boards.
The Cortex-M4 architecture combines general-purpose control processing with digital signal processing instructions and floating-point capabilities suited to embedded control workloads. This architecture allows the XMC4700 to serve as the central processor for motor-control, communications, and industrial automation systems. Integrating Ethernet within the microcontroller reduces the need for separate network-interface hardware when the system design requires an Ethernet-capable controller.
Typical applications include industrial Ethernet equipment, factory automation controllers, building automation interfaces, motor-control systems, and connected sensor gateways. The combination of 2048 kB Flash and 352 kB SRAM is particularly useful for firmware, parameter storage, communication stacks, diagnostics, and real-time control tasks. The same feature set also supports test and measurement front ends that require deterministic embedded processing plus Ethernet connectivity.
Designers should treat the exposed pad as a thermal and electrical connection rather than an optional mechanical feature. Follow the manufacturer’s pin-description and land-pattern guidance when assigning PCB tracks, and validate the Ethernet implementation against the required PHY, magnetics, isolation, and network-timing requirements. Firmware migration also requires checking peripheral availability and the memory map rather than assuming that all XMC family derivatives are functionally identical.
This page combines the manufacturer’s ordering information, memory and clock specifications, package details, qualified drop-in alternatives, comparison parameters, and practical PCB guidance. It is intended to accelerate engineering evaluation while preserving the distinction between a mechanically compatible device and a fully application-qualified replacement.
Pilihan pengganti yang segera untuk XMC4700F100K2048AAXQMA1 — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.
Varietas dalam siri ini
Model serupa yang kompatibel dengan pengganti yang segera XMC4700F100K2048AAXQMA1 (sama faktor bentuk dan kaki) — berbeza dalam Flash Organization, Package, SRAM.
XMC4700F100K1536AAXQMA1
✅ Masuk Drop-In ⚠️ Spesifikasi Tidak DisahkanHubungi untuk harga
Lihat Datasheet →XMC4700F100K1024AAXQMA1
✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif rujukan (tidak dalam katalog)
XMC4700F100F2048AAXQMA1
✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif rujukan (tidak dalam katalog)
XMC4800F100F2048AAXQMA1
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
XMC4700-F100K2048-AA
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
XMC4700F100K2048AAXQMA1 Penilaian maksimum & Ciri-ciri Elektrik
| Product Type | 32-bit industrial microcontroller |
| Processor Core | Arm Cortex-M4 |
| Maximum CPU Frequency | 144 MHz |
| Instruction Set | 32-bit ARM |
| Embedded Flash Memory | 2048 kB (2 Mbit) |
| Flash Organization | 2M x 8 bits |
| SRAM | 352 kB |
| Ethernet Support | Integrated Ethernet |
| Product Family | XMC4000 |
| Device Series | XMC4700 |
| Qualification Segment | Industrial |
| Kemasan | PG-LQFP-100 with exposed pad |
| Package Pin Count | 100 pins |
| Package Dimensions | 14 mm x 14 mm x 1.5 mm |
| Jenis Pemasangan | Surface mount |
| Tegangan Pemberi Arus | 3.3 V |
| Internal Core Voltage | 1.3 V |
| Programming Interface | SWD and additional programming methods supported by the device |
Panduan Konfigurasi Pin XMC4700F100K2048AAXQMA1 14 mm x 14 mm x 1.5 mm
Konfigurasi pin untuk XMC4700F100K2048AAXQMA1 (14 mm x 14 mm x 1.5 mm pakai). IC digital ini termasuk GPIO, antaramuka komunikasi (UART, SPI, I2C), dan pin kuasa. Rujuk dokumen pengeluar untuk fungsi pin alternatif dan opsi konfigurasi. Biasa digunakan dalam rancangan sistem ter嵌入式 dan PCB.
Tiada data garisan pin yang diperoleh untuk XMC4700F100K2048AAXQMA1.
Rujuk kepada lembaran data untuk konfigurasi pin penuh.
Aplikasi Biasa
XMC4700F100K2048AAXQMA1 patut untuk 6 aplikasis: Industrial Ethernet Controllers, Factory Automation Equipment, Motor and Power Control, Building Automation Gateways, Connected Sensor Gateways, Test and Measurement Front Ends.
Industrial Ethernet Controllers
The XMC4700F100K2048AAXQMA1 fits industrial Ethernet controllers because it combines a 144 MHz Arm Cortex-M4 core, 2048 kB of embedded Flash, 352 kB of SRAM, and integrated Ethernet in one 100-pin package. It can execute protocol stacks, maintain communications buffers, and execute real-time control tasks without requiring a separate interface controller. The design should pair the MCU with the appropriate PHY, magnetics, isolation, and routed differential pairs. Ethernet signal integrity, startup timing, and recovery behavior must be validated against the final board layout.
Disebarkan
Factory Automation Equipment
The Infineon XMC4700F100K2048AAXQMA1 is suitable for factory automation controllers that combine deterministic control with network communication. Its Cortex-M4 architecture executes control logic at up to 144 MHz, while 2048 kB of Flash accommodates application code, configuration data, and communications software. The 352 kB of SRAM provides working space for motion tasks, status tables, and network buffers. Use the exposed thermal pad as specified in the land pattern, isolate high-current actuator paths from sensitive Ethernet and analog circuitry, and validate timing under worst-case bus and thermal conditions.
Disebarkan
Motor and Power Control
The XMC4700F100K2048AAXQMA1 can serve as the supervisory controller in a motor-drive or power-control system. Its Cortex-M4 processing core supports fixed-point and floating-point control calculations at up to 144 MHz, while integrated Ethernet enables remote diagnostics and supervisory communication. The device should not directly drive power transistors; it should generate timing and control signals for dedicated gate drivers. Keep high-current switching loops compact, maintain clear isolation boundaries, and verify that the exposed pad, ground plane, and supply filtering support reliable thermal performance.
Disebarkan
Building Automation Gateways
The Infineon XMC4700F100K2048AAXQMA1 fits building automation gateways that coordinate sensors, actuators, and network supervisory functions. Its 2048 kB Flash can hold networking, configuration, and update code, while 352 kB of SRAM supports protocol buffers and runtime state. Integrated Ethernet simplifies the architecture compared with a processor plus discrete interface arrangement. A practical design should include secure boot or update mechanisms where required, watch handling, brownout monitoring, and careful separation between Ethernet magnetics and low-level analog sensing channels.
Disebarkan
Connected Sensor Gateways
The XMC4700F100K2048AAXQMA1 is well suited to a connected sensor gateway because it combines real-time sampling support, substantial SRAM, and Ethernet in one industrial microcontroller. The 144 MHz Cortex-M4 core can supervise sensor acquisition and filtering, while 352 kB of SRAM accommodates queues and protocol buffers. The 2048 kB Flash provides room for gateway firmware and field-update logic. Design the analog input front end for the required bandwidth and dynamic range, use separate filtering for sensitive sensors, and keep Ethernet routing away from sensitive analog inputs.
Disebarkan
Test and Measurement Front Ends
The XMC4700F100K2048AAXQMA1 can act as the embedded control processor in a test or measurement front end requiring high-speed supervisory logic and Ethernet result transfer. The Cortex-M4 core executes sequencing and signal-processing tasks at up to 144 MHz, while the 2048 kB Flash stores firmware, test tables, and configuration. Its 352 kB SRAM supports acquisition buffers and communication queues. Preserve analog-signal integrity through controlled grounding and impedance planning, use the exposed pad for thermal transfer, and confirm acquisition timing with the manufacturer’s clock and peripheral configuration guidance.
Disebarkan
Ringkasan Produk Disebarkan
Data referensi kejuruteraan untuk XMC4700F100K2048AAXQMA1 — perbandingan, panduan rancangan, dan maklumat kesediaan
Panduan Pilihan
Perbandingan dengan Gantian
| Parametr | Produk Ini | XMC4700F100K1536AAXQMA1 | XMC4700F100K1024AAXQMA1 | XMC4700F100F2048AAXQMA1 | XMC4800F100F2048AAXQMA1 | XMC4700-F100K2048-AA |
|---|---|---|---|---|---|---|
| Package | PG-LQFP-100 with exposed pad | PG-LQFP-100 with exposed pad | PG-LQFP-100 with exposed pad | PG-LQFP-100 with exposed pad | PG-LQFP-100 with exposed pad | PG-LQFP-100 with exposed pad |
| Brand | Infineon | Infineon | Infineon | Infineon | Infineon | Infineon |
| Embedded Flash | 2048 kB | 1536 kB | 1024 kB | 2048 kB | 2048 kB | 2048 kB |
| Architecture | 32-bit | 32-bit | 32-bit | 32-bit | 32-bit | 32-bit |
Penyeberangsung Jelas
- Largest embedded Flash among the identified same-family alternatives (vsXMC4700F100K1536AAXQMA1)
- Substantially more memory than the 1024 kB XMC4700 derivative (vsXMC4700F100K1024AAXQMA1)
- Same 2048 kB Flash capacity as the XMC4800 candidate (vsXMC4800F100F2048AAXQMA1)
- Identified industrial configuration with Ethernet and documented SRAM (vsXMC4700-F100K2048-AA)
Catatan Desain
Connect the LQFP exposed pad to the ground plane using the thermal-via pattern and copper area specified by Infineon. The pad is the primary heat-transfer path from the die and should not be treated as an electrically unused lead. Place thermal vias near the pad while avoiding accidental shorts to adjacent signal or power pins, and validate the completed board at the maximum intended clock, ambient temperature, and Ethernet traffic load.
Use the manufacturer’s PG-LQFP-100 land pattern and pin-description table when assigning tracks and vias. Keep the 3.3 V supply routing short, place its local decoupling capacitors at the appropriate supply pins, and provide a low-impedance ground return for the exposed pad. Ethernet differential pairs should be routed as controlled-impedance pairs with minimal stubs, while switching-power and high-current motor paths should remain spatially separated from analog inputs.
Do not treat identical package dimensions as proof of drop-in compatibility. Compare every power, ground, analog, debug, Ethernet, and clock-related signal between the exact ordering codes, then review differences in the XMC4700 and XMC4800 reference manuals. Pay particular attention to startup pins, debug access, interrupt assignments, peripheral clocks, and firmware vector layout. Perform a board-level power, reset, Ethernet link, and peripheral regression test before releasing a substitution to production.
Design the 3.3 V supply and internal 1.3 V core-power sequencing around the manufacturer’s electrical-characteristics tables. Verify startup current, brownout behavior, regulator tolerance, and decoupling requirements under the intended 144 MHz operating condition. The embedded Flash may also impose different current and timing behavior during programming or erase operations, so the power supply should remain within specification during those activities.
Maklumat Kesediaan
The device is identified as an industrial microcontroller, but no explicit RoHS, REACH, lead-free, halogen-free, or conflict-minerals declaration appears in the cited material. AEC-Q100 is not applicable to the identified industrial qualification segment.