XMC4700F100K2048AAXQMA1 - 144MHz Cortex-M4 MCU | Infineon
MPN: XMC4700F100K2048AAXQMA1 ✓ 啟用中XMC4700F100K2048AAXQMA1 概覽
An industrial microcontroller is a semiconductor device designed to execute embedded control, monitoring, and communications functions in equipment operating under sustained environmental and availability requirements. The XMC4700 combines a 32-bit Arm Cortex-M4 processing core with embedded memory and Ethernet peripherals in one device. In the product hierarchy, it belongs to the microcontroller class, within semiconductor and embedded-processing devices.
Core features include 144 MHz maximum operation, 2048 kB Flash, 352 kB SRAM, 32-bit architecture, and integrated Ethernet. The embedded Flash provides 2 Mbit of nonvolatile program storage, while the 352 kB SRAM provides working memory for control algorithms, protocol stacks, diagnostics, and communications buffers. The 100-pin LQFP-100 package also supports a compact surface-mount implementation for industrial controller boards.
The Cortex-M4 architecture combines general-purpose control processing with digital signal processing instructions and floating-point capabilities suited to embedded control workloads. This architecture allows the XMC4700 to serve as the central processor for motor-control, communications, and industrial automation systems. Integrating Ethernet within the microcontroller reduces the need for separate network-interface hardware when the system design requires an Ethernet-capable controller.
Typical applications include industrial Ethernet equipment, factory automation controllers, building automation interfaces, motor-control systems, and connected sensor gateways. The combination of 2048 kB Flash and 352 kB SRAM is particularly useful for firmware, parameter storage, communication stacks, diagnostics, and real-time control tasks. The same feature set also supports test and measurement front ends that require deterministic embedded processing plus Ethernet connectivity.
Designers should treat the exposed pad as a thermal and electrical connection rather than an optional mechanical feature. Follow the manufacturer’s pin-description and land-pattern guidance when assigning PCB tracks, and validate the Ethernet implementation against the required PHY, magnetics, isolation, and network-timing requirements. Firmware migration also requires checking peripheral availability and the memory map rather than assuming that all XMC family derivatives are functionally identical.
This page combines the manufacturer’s ordering information, memory and clock specifications, package details, qualified drop-in alternatives, comparison parameters, and practical PCB guidance. It is intended to accelerate engineering evaluation while preserving the distinction between a mechanically compatible device and a fully application-qualified replacement.
直接替換替代品,適用於 XMC4700F100K2048AAXQMA1 — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: XMC4700F100K2048AAXQMA1 (相同外形與佔位) — 差異在於 Flash Organization, Package, SRAM.
XMC4700F100K1536AAXQMA1
✅ 直接替換 ⚠️ 規格未經驗證聯絡詢價
查看資料表 →XMC4700F100K1024AAXQMA1
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
XMC4700F100F2048AAXQMA1
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
XMC4800F100F2048AAXQMA1
✅ 直接替換📋 參考替代品(不在目錄中)
XMC4700-F100K2048-AA
✅ 直接替換📋 參考替代品(不在目錄中)
XMC4700F100K2048AAXQMA1 最大額定值與電氣特性
| Product Type | 32-bit industrial microcontroller |
| Processor Core | Arm Cortex-M4 |
| Maximum CPU Frequency | 144 MHz |
| Instruction Set | 32-bit ARM |
| Embedded Flash Memory | 2048 kB (2 Mbit) |
| Flash Organization | 2M x 8 bits |
| SRAM | 352 kB |
| Ethernet Support | Integrated Ethernet |
| Product Family | XMC4000 |
| Device Series | XMC4700 |
| Qualification Segment | Industrial |
| 封裝 | PG-LQFP-100 with exposed pad |
| Package Pin Count | 100 pins |
| Package Dimensions | 14 mm x 14 mm x 1.5 mm |
| 安裝類型 | Surface mount |
| 供應電壓 | 3.3 V |
| Internal Core Voltage | 1.3 V |
| Programming Interface | SWD and additional programming methods supported by the device |
XMC4700F100K2048AAXQMA1 14 mm x 14 mm x 1.5 mm 腳位配置指南
XMC4700F100K2048AAXQMA1(14 mm x 14 mm x 1.5 mm 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: XMC4700F100K2048AAXQMA1.
請參閱 資料表 以查看完整腳位配置。
典型應用
XMC4700F100K2048AAXQMA1 適用於 6 應用s: Industrial Ethernet Controllers, Factory Automation Equipment, Motor and Power Control, Building Automation Gateways, Connected Sensor Gateways, Test and Measurement Front Ends.
Industrial Ethernet Controllers
The XMC4700F100K2048AAXQMA1 fits industrial Ethernet controllers because it combines a 144 MHz Arm Cortex-M4 core, 2048 kB of embedded Flash, 352 kB of SRAM, and integrated Ethernet in one 100-pin package. It can execute protocol stacks, maintain communications buffers, and execute real-time control tasks without requiring a separate interface controller. The design should pair the MCU with the appropriate PHY, magnetics, isolation, and routed differential pairs. Ethernet signal integrity, startup timing, and recovery behavior must be validated against the final board layout.
推薦
Factory Automation Equipment
The Infineon XMC4700F100K2048AAXQMA1 is suitable for factory automation controllers that combine deterministic control with network communication. Its Cortex-M4 architecture executes control logic at up to 144 MHz, while 2048 kB of Flash accommodates application code, configuration data, and communications software. The 352 kB of SRAM provides working space for motion tasks, status tables, and network buffers. Use the exposed thermal pad as specified in the land pattern, isolate high-current actuator paths from sensitive Ethernet and analog circuitry, and validate timing under worst-case bus and thermal conditions.
推薦
Motor and Power Control
The XMC4700F100K2048AAXQMA1 can serve as the supervisory controller in a motor-drive or power-control system. Its Cortex-M4 processing core supports fixed-point and floating-point control calculations at up to 144 MHz, while integrated Ethernet enables remote diagnostics and supervisory communication. The device should not directly drive power transistors; it should generate timing and control signals for dedicated gate drivers. Keep high-current switching loops compact, maintain clear isolation boundaries, and verify that the exposed pad, ground plane, and supply filtering support reliable thermal performance.
推薦
Building Automation Gateways
The Infineon XMC4700F100K2048AAXQMA1 fits building automation gateways that coordinate sensors, actuators, and network supervisory functions. Its 2048 kB Flash can hold networking, configuration, and update code, while 352 kB of SRAM supports protocol buffers and runtime state. Integrated Ethernet simplifies the architecture compared with a processor plus discrete interface arrangement. A practical design should include secure boot or update mechanisms where required, watch handling, brownout monitoring, and careful separation between Ethernet magnetics and low-level analog sensing channels.
推薦
Connected Sensor Gateways
The XMC4700F100K2048AAXQMA1 is well suited to a connected sensor gateway because it combines real-time sampling support, substantial SRAM, and Ethernet in one industrial microcontroller. The 144 MHz Cortex-M4 core can supervise sensor acquisition and filtering, while 352 kB of SRAM accommodates queues and protocol buffers. The 2048 kB Flash provides room for gateway firmware and field-update logic. Design the analog input front end for the required bandwidth and dynamic range, use separate filtering for sensitive sensors, and keep Ethernet routing away from sensitive analog inputs.
推薦
Test and Measurement Front Ends
The XMC4700F100K2048AAXQMA1 can act as the embedded control processor in a test or measurement front end requiring high-speed supervisory logic and Ethernet result transfer. The Cortex-M4 core executes sequencing and signal-processing tasks at up to 144 MHz, while the 2048 kB Flash stores firmware, test tables, and configuration. Its 352 kB SRAM supports acquisition buffers and communication queues. Preserve analog-signal integrity through controlled grounding and impedance planning, use the exposed pad for thermal transfer, and confirm acquisition timing with the manufacturer’s clock and peripheral configuration guidance.
推薦
推薦產品摘要
工程參考資料,適用於 XMC4700F100K2048AAXQMA1 — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | XMC4700F100K1536AAXQMA1 | XMC4700F100K1024AAXQMA1 | XMC4700F100F2048AAXQMA1 | XMC4800F100F2048AAXQMA1 | XMC4700-F100K2048-AA |
|---|---|---|---|---|---|---|
| Package | PG-LQFP-100 with exposed pad | PG-LQFP-100 with exposed pad | PG-LQFP-100 with exposed pad | PG-LQFP-100 with exposed pad | PG-LQFP-100 with exposed pad | PG-LQFP-100 with exposed pad |
| Brand | Infineon | Infineon | Infineon | Infineon | Infineon | Infineon |
| Embedded Flash | 2048 kB | 1536 kB | 1024 kB | 2048 kB | 2048 kB | 2048 kB |
| Architecture | 32-bit | 32-bit | 32-bit | 32-bit | 32-bit | 32-bit |
主要差異化特點
- Largest embedded Flash among the identified same-family alternatives (對比XMC4700F100K1536AAXQMA1)
- Substantially more memory than the 1024 kB XMC4700 derivative (對比XMC4700F100K1024AAXQMA1)
- Same 2048 kB Flash capacity as the XMC4800 candidate (對比XMC4800F100F2048AAXQMA1)
- Identified industrial configuration with Ethernet and documented SRAM (對比XMC4700-F100K2048-AA)
設計說明
Connect the LQFP exposed pad to the ground plane using the thermal-via pattern and copper area specified by Infineon. The pad is the primary heat-transfer path from the die and should not be treated as an electrically unused lead. Place thermal vias near the pad while avoiding accidental shorts to adjacent signal or power pins, and validate the completed board at the maximum intended clock, ambient temperature, and Ethernet traffic load.
Use the manufacturer’s PG-LQFP-100 land pattern and pin-description table when assigning tracks and vias. Keep the 3.3 V supply routing short, place its local decoupling capacitors at the appropriate supply pins, and provide a low-impedance ground return for the exposed pad. Ethernet differential pairs should be routed as controlled-impedance pairs with minimal stubs, while switching-power and high-current motor paths should remain spatially separated from analog inputs.
Do not treat identical package dimensions as proof of drop-in compatibility. Compare every power, ground, analog, debug, Ethernet, and clock-related signal between the exact ordering codes, then review differences in the XMC4700 and XMC4800 reference manuals. Pay particular attention to startup pins, debug access, interrupt assignments, peripheral clocks, and firmware vector layout. Perform a board-level power, reset, Ethernet link, and peripheral regression test before releasing a substitution to production.
Design the 3.3 V supply and internal 1.3 V core-power sequencing around the manufacturer’s electrical-characteristics tables. Verify startup current, brownout behavior, regulator tolerance, and decoupling requirements under the intended 144 MHz operating condition. The embedded Flash may also impose different current and timing behavior during programming or erase operations, so the power supply should remain within specification during those activities.
合規資訊
The device is identified as an industrial microcontroller, but no explicit RoHS, REACH, lead-free, halogen-free, or conflict-minerals declaration appears in the cited material. AEC-Q100 is not applicable to the identified industrial qualification segment.