XMC4700F100K2048AAXQMA1 - 144MHz Cortex-M4 MCU | Infineon
料号: XMC4700F100K2048AAXQMA1 ✓ 量产中XMC4700F100K2048AAXQMA1 概述
An industrial microcontroller is a semiconductor device designed to execute embedded control, monitoring, and communications functions in equipment operating under sustained environmental and availability requirements. The XMC4700 combines a 32-bit Arm Cortex-M4 processing core with embedded memory and Ethernet peripherals in one device. In the product hierarchy, it belongs to the microcontroller class, within semiconductor and embedded-processing devices.
Core features include 144 MHz maximum operation, 2048 kB Flash, 352 kB SRAM, 32-bit architecture, and integrated Ethernet. The embedded Flash provides 2 Mbit of nonvolatile program storage, while the 352 kB SRAM provides working memory for control algorithms, protocol stacks, diagnostics, and communications buffers. The 100-pin LQFP-100 package also supports a compact surface-mount implementation for industrial controller boards.
The Cortex-M4 architecture combines general-purpose control processing with digital signal processing instructions and floating-point capabilities suited to embedded control workloads. This architecture allows the XMC4700 to serve as the central processor for motor-control, communications, and industrial automation systems. Integrating Ethernet within the microcontroller reduces the need for separate network-interface hardware when the system design requires an Ethernet-capable controller.
Typical applications include industrial Ethernet equipment, factory automation controllers, building automation interfaces, motor-control systems, and connected sensor gateways. The combination of 2048 kB Flash and 352 kB SRAM is particularly useful for firmware, parameter storage, communication stacks, diagnostics, and real-time control tasks. The same feature set also supports test and measurement front ends that require deterministic embedded processing plus Ethernet connectivity.
Designers should treat the exposed pad as a thermal and electrical connection rather than an optional mechanical feature. Follow the manufacturer’s pin-description and land-pattern guidance when assigning PCB tracks, and validate the Ethernet implementation against the required PHY, magnetics, isolation, and network-timing requirements. Firmware migration also requires checking peripheral availability and the memory map rather than assuming that all XMC family derivatives are functionally identical.
This page combines the manufacturer’s ordering information, memory and clock specifications, package details, qualified drop-in alternatives, comparison parameters, and practical PCB guidance. It is intended to accelerate engineering evaluation while preserving the distinction between a mechanically compatible device and a fully application-qualified replacement.
直接替换替代料: XMC4700F100K2048AAXQMA1 ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: XMC4700F100K2048AAXQMA1 (相同外形与封装尺寸) ——差异在于 Flash Organization, Package, SRAM.
XMC4700F100K1536AAXQMA1
✅ 直接替换 ⚠️ 规格未核验联系询价
查看数据手册 →XMC4700F100K1024AAXQMA1
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料(不在目录中)
XMC4700F100F2048AAXQMA1
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料(不在目录中)
XMC4800F100F2048AAXQMA1
✅ 直接替换📋 参考替代料(不在目录中)
XMC4700-F100K2048-AA
✅ 直接替换📋 参考替代料(不在目录中)
XMC4700F100K2048AAXQMA1 最大额定值与电气特性
| Product Type | 32-bit industrial microcontroller |
| Processor Core | Arm Cortex-M4 |
| Maximum CPU Frequency | 144 MHz |
| Instruction Set | 32-bit ARM |
| Embedded Flash Memory | 2048 kB (2 Mbit) |
| Flash Organization | 2M x 8 bits |
| SRAM | 352 kB |
| Ethernet Support | Integrated Ethernet |
| Product Family | XMC4000 |
| Device Series | XMC4700 |
| Qualification Segment | Industrial |
| 封装 | PG-LQFP-100 with exposed pad |
| Package Pin Count | 100 pins |
| Package Dimensions | 14 mm x 14 mm x 1.5 mm |
| 安装类型 | Surface mount |
| 电源电压 | 3.3 V |
| Internal Core Voltage | 1.3 V |
| Programming Interface | SWD and additional programming methods supported by the device |
XMC4700F100K2048AAXQMA1 14 mm x 14 mm x 1.5 mm 引脚配置指南
XMC4700F100K2048AAXQMA1(14 mm x 14 mm x 1.5 mm 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据: XMC4700F100K2048AAXQMA1.
请参阅 数据手册 以查看完整引脚配置。
典型应用
XMC4700F100K2048AAXQMA1 适用于 6 应用s: Industrial Ethernet Controllers, Factory Automation Equipment, Motor and Power Control, Building Automation Gateways, Connected Sensor Gateways, Test and Measurement Front Ends.
Industrial Ethernet Controllers
The XMC4700F100K2048AAXQMA1 fits industrial Ethernet controllers because it combines a 144 MHz Arm Cortex-M4 core, 2048 kB of embedded Flash, 352 kB of SRAM, and integrated Ethernet in one 100-pin package. It can execute protocol stacks, maintain communications buffers, and execute real-time control tasks without requiring a separate interface controller. The design should pair the MCU with the appropriate PHY, magnetics, isolation, and routed differential pairs. Ethernet signal integrity, startup timing, and recovery behavior must be validated against the final board layout.
推荐
Factory Automation Equipment
The Infineon XMC4700F100K2048AAXQMA1 is suitable for factory automation controllers that combine deterministic control with network communication. Its Cortex-M4 architecture executes control logic at up to 144 MHz, while 2048 kB of Flash accommodates application code, configuration data, and communications software. The 352 kB of SRAM provides working space for motion tasks, status tables, and network buffers. Use the exposed thermal pad as specified in the land pattern, isolate high-current actuator paths from sensitive Ethernet and analog circuitry, and validate timing under worst-case bus and thermal conditions.
推荐
Motor and Power Control
The XMC4700F100K2048AAXQMA1 can serve as the supervisory controller in a motor-drive or power-control system. Its Cortex-M4 processing core supports fixed-point and floating-point control calculations at up to 144 MHz, while integrated Ethernet enables remote diagnostics and supervisory communication. The device should not directly drive power transistors; it should generate timing and control signals for dedicated gate drivers. Keep high-current switching loops compact, maintain clear isolation boundaries, and verify that the exposed pad, ground plane, and supply filtering support reliable thermal performance.
推荐
Building Automation Gateways
The Infineon XMC4700F100K2048AAXQMA1 fits building automation gateways that coordinate sensors, actuators, and network supervisory functions. Its 2048 kB Flash can hold networking, configuration, and update code, while 352 kB of SRAM supports protocol buffers and runtime state. Integrated Ethernet simplifies the architecture compared with a processor plus discrete interface arrangement. A practical design should include secure boot or update mechanisms where required, watch handling, brownout monitoring, and careful separation between Ethernet magnetics and low-level analog sensing channels.
推荐
Connected Sensor Gateways
The XMC4700F100K2048AAXQMA1 is well suited to a connected sensor gateway because it combines real-time sampling support, substantial SRAM, and Ethernet in one industrial microcontroller. The 144 MHz Cortex-M4 core can supervise sensor acquisition and filtering, while 352 kB of SRAM accommodates queues and protocol buffers. The 2048 kB Flash provides room for gateway firmware and field-update logic. Design the analog input front end for the required bandwidth and dynamic range, use separate filtering for sensitive sensors, and keep Ethernet routing away from sensitive analog inputs.
推荐
Test and Measurement Front Ends
The XMC4700F100K2048AAXQMA1 can act as the embedded control processor in a test or measurement front end requiring high-speed supervisory logic and Ethernet result transfer. The Cortex-M4 core executes sequencing and signal-processing tasks at up to 144 MHz, while the 2048 kB Flash stores firmware, test tables, and configuration. Its 352 kB SRAM supports acquisition buffers and communication queues. Preserve analog-signal integrity through controlled grounding and impedance planning, use the exposed pad for thermal transfer, and confirm acquisition timing with the manufacturer’s clock and peripheral configuration guidance.
推荐
推荐产品汇总
工程参考数据: XMC4700F100K2048AAXQMA1 ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | XMC4700F100K1536AAXQMA1 | XMC4700F100K1024AAXQMA1 | XMC4700F100F2048AAXQMA1 | XMC4800F100F2048AAXQMA1 | XMC4700-F100K2048-AA |
|---|---|---|---|---|---|---|
| Package | PG-LQFP-100 with exposed pad | PG-LQFP-100 with exposed pad | PG-LQFP-100 with exposed pad | PG-LQFP-100 with exposed pad | PG-LQFP-100 with exposed pad | PG-LQFP-100 with exposed pad |
| Brand | Infineon | Infineon | Infineon | Infineon | Infineon | Infineon |
| Embedded Flash | 2048 kB | 1536 kB | 1024 kB | 2048 kB | 2048 kB | 2048 kB |
| Architecture | 32-bit | 32-bit | 32-bit | 32-bit | 32-bit | 32-bit |
关键差异点
- Largest embedded Flash among the identified same-family alternatives (对比 XMC4700F100K1536AAXQMA1)
- Substantially more memory than the 1024 kB XMC4700 derivative (对比 XMC4700F100K1024AAXQMA1)
- Same 2048 kB Flash capacity as the XMC4800 candidate (对比 XMC4800F100F2048AAXQMA1)
- Identified industrial configuration with Ethernet and documented SRAM (对比 XMC4700-F100K2048-AA)
设计说明
Connect the LQFP exposed pad to the ground plane using the thermal-via pattern and copper area specified by Infineon. The pad is the primary heat-transfer path from the die and should not be treated as an electrically unused lead. Place thermal vias near the pad while avoiding accidental shorts to adjacent signal or power pins, and validate the completed board at the maximum intended clock, ambient temperature, and Ethernet traffic load.
Use the manufacturer’s PG-LQFP-100 land pattern and pin-description table when assigning tracks and vias. Keep the 3.3 V supply routing short, place its local decoupling capacitors at the appropriate supply pins, and provide a low-impedance ground return for the exposed pad. Ethernet differential pairs should be routed as controlled-impedance pairs with minimal stubs, while switching-power and high-current motor paths should remain spatially separated from analog inputs.
Do not treat identical package dimensions as proof of drop-in compatibility. Compare every power, ground, analog, debug, Ethernet, and clock-related signal between the exact ordering codes, then review differences in the XMC4700 and XMC4800 reference manuals. Pay particular attention to startup pins, debug access, interrupt assignments, peripheral clocks, and firmware vector layout. Perform a board-level power, reset, Ethernet link, and peripheral regression test before releasing a substitution to production.
Design the 3.3 V supply and internal 1.3 V core-power sequencing around the manufacturer’s electrical-characteristics tables. Verify startup current, brownout behavior, regulator tolerance, and decoupling requirements under the intended 144 MHz operating condition. The embedded Flash may also impose different current and timing behavior during programming or erase operations, so the power supply should remain within specification during those activities.
合规信息
The device is identified as an industrial microcontroller, but no explicit RoHS, REACH, lead-free, halogen-free, or conflict-minerals declaration appears in the cited material. AEC-Q100 is not applicable to the identified industrial qualification segment.