ATF22LV10CZ-25JC - 25ns 10-Macrocell PLD | Microchip
MPN: ATF22LV10CZ-25JC ✓ فعالATF22LV10CZ-25JC نمای کلی
A simple programmable logic device is a semiconductor that stores a fixed logic function in nonvolatile memory and implements it through configurable AND-array and OR-array connections. Within the broader hierarchy, an SPLD is a programmable logic device, which is a form of digital integrated circuit and logic IC. The ATF22LV10CZ series provides a practical middle ground between individual gates and more complex programmable logic arrays.
The ATF22LV10CZ-25JC provides 10 macrocells, a nominal 25 ns speed grade, 3.3 V and 5 V operation, and standby current of no more than 25 microamperes. Input and output keeper circuits retain previous logic levels while inputs and outputs are idle, eliminating the static current normally consumed by external pull-up resistors. These features support compact designs where deterministic state retention and low standby consumption are important.
At the device level, the electrically erasable Flash configuration allows the logic design to be reprogrammed without a dedicated programmer that uses ultraviolet erasure. The 25 ns speed grade is suited to control paths and moderate-speed interface logic rather than high-frequency synchronous datapaths. Designers should also account for the output-delay and setup requirements of the specific system clock when evaluating timing closure.
Typical uses include bus decoding, address and chip-select logic, sequencer control, interface arbitration, legacy peripheral adaptation, and small state-machine implementations. The device is especially useful in industrial, communications, and embedded-control equipment where compact fixed logic can reduce component count while remaining electrically erasable.
The principal design consideration is the 28-pin PLCC footprint. PLCC sockets remain practical for prototype and legacy maintenance work, but modern production boards may favor surface-mount packages, so mechanical availability should be checked before a new design begins. The manufacturer datasheet should be used for the complete pin description, timing limits, recommended operating conditions, and programming procedure.
This page combines the ATF22LV10CZ-25JC device identity, package information, verified engineering characteristics, candidate pin-compatible alternatives, and practical implementation guidance in one design-focused reference. It also distinguishes speed-, temperature-, and supply-related differences so engineers can assess replacement risk before modifying an existing PCB.
جایگزینهای drop-in برای ATF22LV10CZ-25JC — همان پکیج، سازگار پینبهپین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.
گونهها در این سری
مدلهای همسری که جایگزین مستقیم هستند برای ATF22LV10CZ-25JC (همان فرمفاکتور و فوتپرینت) — متفاوت در Device Type, Supply Voltage Range, Architecture, Package Type, Standby Current.
ATF22LV10CZ-25JI
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←ATF22LV10CZ-25PC
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←ATF22LV10C-10JC
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←ATF22LV10CQZ-30JC
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←GAL22V10D-10QJ
✅ جایگزین مستقیم📋 جایگزین مرجع (خارج از کاتالوگ)
ATF22LV10CZ-25JC حداکثر مقادیر مجاز و مشخصات الکتریکی
| Device Type | Simple programmable logic device (SPLD) |
| Configuration Technology | Electrically erasable CMOS Flash memory |
| Macrocell Count | 10 macrocells |
| Logic Gate Capacity | Approximately 500 gates |
| Propagation Delay | 25 ns |
| Maximum Frequency | 40 MHz |
| Supply Voltage Range | 3.0 V to 5.0 V |
| Nominal Supply Voltages | 3.3 V and 5 V |
| Standby Current | 25 uA maximum |
| Input Keeper Circuits | Yes |
| Output Keeper Circuits | Yes |
| Package Type | 28-pin J-lead PLCC |
| Package Dimensions | 11.51 mm x 11.51 mm |
| Terminal Count | 28 terminals |
| Terminal Form | J-lead |
| Temperature Grade | Commercial |
| نوع نصب | Surface mount |
| Programming Method | Electrically erasable Flash programming |
راهنمای پیکربندی پین ATF22LV10CZ-25JC 11.51 mm x 11.51 mm
پیکربندی پین برای ATF22LV10CZ-25JC (پکیج 11.51 mm x 11.51 mm). این IC دیجیتال شامل GPIO، رابطهای ارتباطی (UART، SPI، I2C) و پینهای تغذیه است. برای عملکردهای جایگزین پین و گزینههای پیکربندی به دیتاشیت سازنده مراجعه کنید. ضروری برای طراحی سیستمهای نهفته و چیدمان PCB.
داده پینآوت تفصیلی موجود نیست برای ATF22LV10CZ-25JC.
به دیتاشیت برای پیکربندی کامل پینها.
کاربردهای معمول
ATF22LV10CZ-25JC مناسب است برای 6 کاربردs: Address Decoding and Chip Select, Industrial Control Sequencing, Legacy Peripheral Interface Adaptation, Communications Control Logic, Audio and Display Control, Programmable Test and Measurement Logic.
Address Decoding and Chip Select
The ATF22LV10CZ-25JC fits compact address-decoding logic because its 10 macrocells can implement several decode equations while its 25 ns propagation delay provides timing margin for moderate-speed control paths. Place the device between an address bus and one or more chip-select outputs, then use the keeper circuits to retain input states during idle periods. The 3.0 V minimum operating voltage supports 3.3 V systems, while the 28-pin PLCC package permits serviceable prototype construction. Review the datasheet timing tables against the decoder’s required setup, hold, and output-valid intervals.
پیشنهادی
Industrial Control Sequencing
The ATF22LV10CZ-25JC can implement compact state-transition and sequencing logic for industrial control boards where 10 macrocells provide enough capacity for a compact state machine. Its 25 ns grade is appropriate for ordinary control and handshake paths rather than high-speed processor datapaths, and the keeper circuits help avoid floating control inputs during idle periods. The commercial-grade JC ordering code must remain within its specified ambient-temperature range; use ATF22LV10CZ-25JI when industrial-temperature operation is required. Verify reset-state behavior and every timing path before releasing a production design.
پیشنهادی
Legacy Peripheral Interface Adaptation
The ATF22LV10CZ-25JC is useful when adapting a legacy peripheral whose handshake signals do not match a modern controller. Ten macrocells can generate request, acknowledge, busy, and command-control signals without adding a large FPGA or processor. Its electrically erasable Flash configuration allows interface revisions during maintenance, while the 25 ns propagation delay suits moderate-speed asynchronous handshakes. Confirm that each replacement function has adequate timing margin and that output polarity, drive strength, and keeper behavior match the original interface. The PLCC package also supports socketed service boards and straightforward component replacement.
پیشنهادی
Communications Control Logic
The ATF22LV10CZ-25JC can support framing, command parsing, and peripheral-selection logic in communications equipment where a small amount of deterministic parallel logic is needed. The 10-macrocell device is more appropriate than a general CPLD when the equations are modest and fixed, while the 25 ns speed grade accommodates many control and status paths. Its 3.0 V to 5.0 V operating range allows integration into mixed legacy interface boards. Engineers should validate setup and hold timing against the host bus and account for output-state changes during configuration using the manufacturer timing and keeper-circuit information.
پیشنهادی
Audio and Display Control
The ATF22LV10CZ-25JC can implement mute, mode-select, indicator, and sequencing functions around audio or display subsystems. The device is better suited to control and status functions than high-bandwidth audio or video data paths, and its 10 macrocells allow several related functions to be consolidated. The 25 ns propagation delay is suitable for ordinary control sequencing, while the keeper circuits reduce unwanted static current from undriven control inputs. Check output timing against the connected codec, display, or interface device and use the datasheet to confirm supply-current limits across the intended operating mode.
پیشنهادی
Programmable Test and Measurement Logic
The ATF22LV10CZ-25JC is suitable for compact fixtures that combine limit comparisons, routing decisions, and front-panel control. Electrically erasable Flash permits design revisions without ultraviolet erasure, which is useful when test requirements evolve. Its 10 macrocells and 25 ns speed grade suit low- to moderate-speed control functions but not high-speed sampling or instrumentation timing paths. For a new instrument platform, confirm that the PLCC component remains mechanically available and that the programmed device can be tested with a supported programmer. Validate every timing path and input threshold against the measured signals.
پیشنهادی
خلاصه محصولات پیشنهادی
دادههای مرجع مهندسی برای ATF22LV10CZ-25JC — مقایسه، راهنمای طراحی و اطلاعات انطباق.
راهنمای انتخاب
مقایسه با جایگزینها
| پارامتر | این محصول | ATF22LV10CZ-25JI | ATF22LV10CZ-25PC | ATF22LV10C-10JC | ATF22LV10CQZ-30JC | GAL22V10D-10QJ |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Lattice Semiconductor |
| Package | 28-pin J-lead PLCC (11.51 mm x 11.51 mm) | 28-pin J-lead PLCC | 28-pin J-lead PLCC | 28-pin J-lead PLCC | 28-pin J-lead PLCC | 28-pin PLCC |
| Propagation Delay | 25 ns | 25 ns | 25 ns | 10 ns | 30 ns | 10 ns |
| Macrocell Count | 10 macrocells | 10 macrocells | 10 macrocells | 10 macrocells | 10 macrocells | 10 macrocells |
| Configuration Memory | Electrically erasable Flash memory | Electrically erasable Flash memory | Electrically erasable Flash memory | Electrically erasable Flash memory | Electrically erasable Flash memory | Fuse-programmed architecture |
تفاوتهای کلیدی
- Commercial-temperature ordering code with a 25 ns speed grade (در مقابلATF22LV10CZ-25JI)
- Faster speed grade than the 30 ns CQZ candidate (در مقابلATF22LV10CQZ-30JC)
- Electrically erasable Flash configuration (در مقابلGAL22V10D-10QJ)
- Lower-voltage 3.3 V operation (در مقابلGAL22V10D-10QJ)
یادداشتهای طراحی
Do not treat a matching PLCC footprint as proof of logic compatibility. Before replacing ATF22LV10CZ-25JC, compare the complete pin description, macrocell architecture, product terms, supply-voltage limits, input and output timing, output behavior, and programming method. The GAL22V10D-10QJ, for example, is a fuse-programmed 5 V architecture rather than a 3.3 V/5 V electrically erasable Flash device, so its programmed logic file and timing behavior must be reviewed explicitly.
Confirm the J-lead land pattern, pin-1 orientation, solder-process requirements, and component availability before laying out a new PCB. The ATF22LV10CZ-25JC is a 28-pin J-lead PLCC measuring 11.51 mm by 11.51 mm, so a generic QFP-style footprint is not interchangeable. For maintenance and prototype boards, a correctly keyed socket can simplify replacement; for high-volume production, verify component handling, moisture protection, assembly temperature, and the selected package's recommended land pattern.
Use the datasheet timing tables to check propagation delay, output transitions, setup, hold, and skew for every control path. The 25 ns grade is appropriate for many ordinary asynchronous control functions but does not by itself guarantee system timing margin. Account for external bus loading, connector delay, and any skew introduced by long PCB traces. A slower 30 ns alternative may still work at moderate frequencies, but it reduces timing margin by 5 ns relative to the target grade.
Decouple the supply pins close to the device and follow the manufacturer recommended capacitor network and layout. The ATF22LV10CZ-25JC supports operation down to 3.0 V and is associated with 3.3 V and 5 V classes, so supply tolerance and ripple must remain within the applicable electrical-characteristics limits. Keeper circuits reduce current caused by floating inputs during idle periods, but they do not replace deliberate pull-up or pull-down design in every power-up and reset scenario.
اطلاعات انطباق
No explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statements were identified. AEC-Q100 is shown as unknown rather than not applicable because the industrial-temperature alternative is distinct from the commercial-grade target.