ATF22V10C-10JI - 10-Macrocell 10ns Flash PLD | Microchip
MPN: ATF22V10C-10JI ✓ فعالATF22V10C-10JI جائزہ
A programmable logic device is a semiconductor that implements a Boolean function through user-programmed logic rather than a fixed gate arrangement. The ATF22V10C series provides 10 macrocells, a 22V10-compatible architecture, and a JEDEC-compatible fuse map for applications previously implemented with GAL22V10-type devices. Electrically erasable Flash technology allows the configuration to be reprogrammed, supporting design revisions, production programming, and field-updatable control logic.
The ATF22V10C-10JI is identified by its 10 ns speed grade and industrial temperature qualification. The manufacturer describes the ATF22V10C family as supporting speeds down to 5 ns, with typical power dissipation as low as 10 microamps. The device operates from a nominal 5 V supply, with the supplied manufacturer material specifying the full 5 V plus or minus 10 percent range for military and industrial temperature ranges and 5 V plus or minus 5 percent for commercial operation.
Typical applications include industrial control interfaces, legacy peripheral emulation, address decoding, bus arbitration, interface translation, and small state-machine implementations. Its 10 macrocells make it suitable for compact glue-logic designs where a discrete gate network would be larger or less flexible. The electrically erasable Flash configuration also makes the device useful where engineering changes are expected during prototype development or maintenance cycles.
When designing around this PLD, verify the 28-pin PLCC pinout and the exact fuse-map and programming-software compatibility before updating an existing GAL22V10 design. The ATF22V10C-10JI is not a general-purpose microcontroller: it implements deterministic combinational and registered logic without firmware execution. Confirm supply tolerances, timing requirements, temperature range, programming toolchain, and output-drive requirements against the manufacturer datasheet.
This page consolidates the manufacturer specifications, package information, cross-reference information, and practical selection considerations for engineers evaluating a pin-compatible replacement or designing new compact control logic.
کے لیے ڈراپ اِن متبادل ATF22V10C-10JI — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس سیریز میں مختلف ورژن
اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں ATF22V10C-10JI (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Package, Device Type, Propagation Delay, Family Maximum Speed, Temperature Grade.
ATF22V10C-10JU
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
ATF22V10C-15JI
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →ATF22V10C-10JC
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →ATF22V10C-7JI
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →ATF22V10C-5JI
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
ATF22V10C-7JC
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →ATF22V10C-10JI زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات
| Device Type | Electrically erasable CMOS programmable logic device (PLD) |
| Series | ATF22V10C |
| Macrocells | 10 macrocells |
| Propagation Delay | 10 ns |
| Configuration Technology | Electrically erasable Flash memory |
| Nominal Supply Voltage | 5 V |
| Military and Industrial Supply Range | 5 V plus or minus 10 percent |
| Commercial Supply Range | 5 V plus or minus 5 percent |
| Minimum Family Propagation Delay | 5 ns |
| Typical Low Power Dissipation | 10 microamps |
| پیکیج | 28-pin PLCC, J-lead |
| Package Dimensions | 11.51 mm x 11.51 mm |
| Temperature Grade | Industrial |
| Terminal Count | 28 terminals |
| Terminal Form | J-bend |
| ماؤنٹنگ ٹائپ | Surface mount |
| Fuse Map Compatibility | JEDEC fusemap compatible |
| Power-Down Feature | Optional pin-controlled power-down |
| PLCC Power-Down Pin | Pin 5 |
| AEC-Q100 Qualification | Not applicable |
ATF22V10C-10JI 11.51 mm x 11.51 mm پن کنفیگریشن گائیڈ
ATF22V10C-10JI (11.51 mm x 11.51 mm پیکیج) کے لیے پن کنفیگریشن۔ اس ڈیجیٹل IC میں GPIO، کمیونیکیشن انٹرفیس (UART، SPI، I2C) اور پاور پنز شامل ہیں۔ متبادل پن فنکشنز اور کنفیگریشن آپشنز کے لیے مینوفیکچرر کے ڈیٹا شیٹ سے رجوع کریں۔ ایمبیڈڈ سسٹم ڈیزائن اور PCB لے آؤٹ کے لیے ضروری۔
کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں ATF22V10C-10JI.
رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔
عام استعمالات
ATF22V10C-10JI کے لیے موزوں ہے 6 ایپلیکیشنs: Industrial Control Glue Logic, Legacy Peripheral Emulation, Bus Address Decoding, Interface Signal Qualification, Small State Machine Control, Programmable Test and Measurement Logic.
Industrial Control Glue Logic
The ATF22V10C-10JI suits compact industrial control logic where a controller needs deterministic decoding, interlocks, and state transitions without a full microcontroller. Its 10 macrocells and 10 ns propagation delay support fast combinational decisions and registered outputs, while the electrically erasable Flash configuration allows logic revisions after prototype validation. The 28-pin PLCC package also supports legacy industrial boards that already use the compatible 22V10 footprint. Engineers should validate propagation delay against the control loop, confirm the industrial temperature grade, and preserve the JEDEC fuse map when migrating an existing GAL22V10 design.
تجویز کردہ
Legacy Peripheral Emulation
ATF22V10C-10JI can reproduce the fixed logic previously implemented in GAL22V10-type programmable logic, making it useful for maintaining older peripheral-control boards. Microchip identifies the ATF22V10C family as pin-to-pin and JEDEC fusemap compatible with GAL22V10 devices, while electrically erasable Flash removes the one-time fuse-programming constraint. The 10 ns grade is appropriate for address decoding, command qualification, and interface state machines. Before replacing an installed device, compare AC and DC characteristics, verify the PLCC package orientation, and confirm that the available programmer supports the ATF22V10C fuse map.
تجویز کردہ
Bus Address Decoding
The ATF22V10C-10JI is suitable for decoding address and control buses into chip-select or resource-enable signals. Ten macrocells provide enough product terms and registered outputs for compact decode structures, while the 10 ns propagation delay defines how quickly decode outputs can respond after an address or control change. Registering outputs can reduce combinational glitches when the board requires stable select timing. In a new design, document the registered versus combinational product-term allocation and simulate every address transition. For an upgrade, preserve the established fuse map and validate timing against the slowest external device on the bus.
تجویز کردہ
Interface Signal Qualification
ATF22V10C-10JI can qualify asynchronous request, acknowledge, and handshake signals before they reach a larger control system. Its 10 ns propagation delay and registered output capability help implement deterministic pulse shaping, interlock generation, and synchronized command enable functions. Electrically erasable Flash is particularly useful when a legacy interface has several hardware variants: engineers can store different qualification patterns without changing the PCB. The design must account for the actual input and output timing across voltage and temperature, use the manufacturer pinout when assigning PLCC pin 5 as the optional power-down control, and test metastability risks at any external synchronization boundary.
تجویز کردہ
Small State Machine Control
The ATF22V10C-10JI is well suited to small state-machine and sequencing functions in industrial and instrumentation products. Ten macrocells can implement a compact sequence controller, while the 10 ns delay provides margin for combinational transitions between clocked states. The flash-based configuration allows firmware-like logic updates during maintenance without replacing the component, although the device still requires a dedicated programming cycle rather than runtime software updates. Design the state equations with explicit reset and illegal-state handling, confirm the available clock and registered-output resources, and validate every transition with a timing simulation before programming production hardware.
تجویز کردہ
Programmable Test and Measurement Logic
ATF22V10C-10JI can implement instrument-specific sequencing, trigger routing, and status decoding where the control topology must remain flexible. Its 10 macrocells provide a compact solution for combining switch debounce logic, measurement sequencing, and output enables without building a large discrete gate network. The electrically erasable Flash configuration supports multiple fixture or test-mode configurations and rapid engineering changes. Because the PLD is not a microcontroller, external test controllers must perform sequencing and measurement. Verify the 10 ns propagation delay across the required supply range, isolate input signals from switching noise, and use the manufacturer's PLCC pin description to assign the optional power-down function.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا ATF22V10C-10JI — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | ATF22V10C-10JU | ATF22V10C-15JI | ATF22V10C-10JC | ATF22V10C-7JI | ATF22V10C-5JI |
|---|---|---|---|---|---|---|
| Package | 28-PLCC (11.51x11.51) | 28-PLCC (11.51x11.51) | 28-PLCC (11.51x11.51) | 28-PLCC (11.51x11.51) | 28-PLCC (11.51x11.51) | 28-PLCC (11.51x11.51) |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Macrocells | 10 macrocells | 10 macrocells | 10 macrocells | 10 macrocells | 10 macrocells | 10 macrocells |
| Propagation Delay | 10 ns | 10 ns | 15 ns | 10 ns | 7 ns | 5 ns |
| Configuration Technology | Electrically erasable Flash memory | Electrically erasable Flash memory | Electrically erasable Flash memory | Electrically erasable Flash memory | Electrically erasable Flash memory | Electrically erasable Flash memory |
| Nominal Supply Voltage | 5 V | 5 V | 5 V | 5 V | 5 V | 5 V |
| Power-Down Feature | Optional pin-controlled power-down | Optional pin-controlled power-down | Optional pin-controlled power-down | Optional pin-controlled power-down | Optional pin-controlled power-down | Optional pin-controlled power-down |
اہم امتیازی خصوصیات
- Matches the industrial 10 ns ordering configuration (بمقابلہATF22V10C-10JC)
- Faster than the 15 ns family alternative (بمقابلہATF22V10C-15JI)
- Provides a conservative timing upgrade without changing speed grade (بمقابلہATF22V10C-10JU)
- Faster switching margin than the target device (بمقابلہATF22V10C-7JI)
ڈیزائن نوٹس
Do not treat the ATF22V10C as a fuse-programmed GAL22V10 without checking the programming workflow. Although the devices are pin-to-pin and JEDEC fusemap compatible, the ATF22V10C uses electrically erasable Flash technology. Select a programmer and software release that explicitly supports the ATF22V10C architecture, then verify the programmed fuse map against the original design.
Assign PLCC nets strictly from the manufacturer pin-description table, including the optional power-down function on pin 5. Preserve the package orientation and pin-1 marking on the PCB, and avoid placing high-current or fast-switching traces beside the device unless the ground-return path is controlled. The J-lead footprint is intended for surface mounting and may require a thermal consideration in temperature-cycling applications.
Validate every registered-output path against the 10 ns speed grade, the 5 V plus or minus 10 percent military and industrial supply range, and the required external load. For address or control buses, simulate both valid and illegal state transitions and include reset behavior. Where an external signal enters the PLD asynchronously, constrain the design to the electrical limits in the manufacturer datasheet rather than relying on nominal logic timing alone.
The manufacturer describes power dissipation as low as 10 microamps for the ATF22V10C family, but that family-level figure does not define the final board power. Estimate the device dissipation from the actual supply voltage, output load, switching activity, and selected speed grade. Provide local supply decoupling and a stable 5 V source, particularly when the PLD controls signals connected to higher-current external devices.
تعمیل کی معلومات
The ATF22V10C family is a legacy industrial programmable logic device, and no specific environmental compliance claims were identified for the exact ordering code. JEDEC fusemap compatibility is identified by the manufacturer.