ATF22V10CQZ-20JC - 20ns 10-Macrocell EE PLD | Microchip
MPN: ATF22V10CQZ-20JC ✗ End of LifeATF22V10CQZ-20JC Overview
A PLD, or programmable logic device, is a semiconductor whose internal logic is configured after fabrication. Within the broader hierarchy, this device is an EE PLD, then a CMOS PLD, then a programmable logic device, and finally a digital semiconductor. The ATF22V10CQZ architecture supports direct replacement of the generic 22V10 family and many 24-pin combinatorial PLDs, making it useful for compact glue logic, control logic, state decoding, and legacy system support.
The device provides 10 macrocells, with each output receiving 8 to 16 product terms. Its industry-standard architecture simplifies migration from conventional PAL-type logic. Electrically erasable technology allows a finished board to be reprogrammed during development or manufacturing, while zero-power operation and a maximum standby current of 25 uA help control power consumption in systems that remain connected to power while the logic is inactive.
The ATF22V10CQZ family is offered in speed grades down to 12 ns, and the ATF22V10CQZ-20JC is the 20 ns grade. CMOS- and TTL-compatible interfaces allow it to operate alongside both modern CMOS logic and legacy TTL-family signals. This combination of electrical erasability, low standby power, and conventional logic compatibility makes the device suitable for maintaining established control paths without committing to a more complex FPGA implementation.
Typical applications include industrial control and instrumentation, interface decoding, legacy peripheral adaptation, embedded control logic, and small control systems that benefit from reconfigurable logic. The 10-macrocell capacity is well suited to compact Boolean functions that would otherwise occupy several conventional gate arrays or a larger programmable logic package.
Designers should confirm the PLCC footprint, pin assignments, supply voltage, temperature grade, and programming-device support before placing the part. Because this is a legacy programmable logic device, new designs should validate whether a current PLD, FPGA, or small microcontroller offers better long-term sourcing, tooling, and lifecycle support.
This page combines device specifications, structured comparison data, replacement guidance, and practical design considerations to help engineers assess the ATF22V10CQZ-20JC for legacy PLD designs, footprint-compatible substitutions, and migration decisions.
Drop-in alternatives for ATF22V10CQZ-20JC — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.
Variants in this series
Same-series models that are drop-in compatible with ATF22V10CQZ-20JC (same form factor and footprint) — differing in Device Type, Package, Mounting Type, Programmable Technology.
ATF22V10CQZ-20JI
✅ Drop-InContact for price
View Datasheet →ATF22V10CQZ-20JU
✅ Drop-InContact for price
View Datasheet →ATF22V10CQZ-20SU
✅ Drop-In📋 Reference alternative (not in catalog)
ATF22V10CQZ-20JC Maximum Ratings & Electrical Characteristics
| Device Type | Electrically erasable CMOS programmable logic device |
| Product Family | ATF22V10 |
| Architecture | Industry-standard 22V10 architecture |
| Macrocells | 10 macrocells |
| Speed Grade | 20 ns |
| Family Maximum Pin-to-Pin Delay | 12 ns |
| Programmable Technology | Electrically erasable flash memory |
| Reprogrammable | Yes |
| Output Product Terms | 8 to 16 product terms per output |
| Input Compatibility | CMOS and TTL compatible |
| Output Compatibility | CMOS and TTL compatible |
| Maximum Standby Current | 25 uA |
| Standby Power | 0 W |
| Supply Voltage | 5 V |
| Package | 28-pin PLCC, 11.51 x 11.51 mm |
| Mounting Type | Surface mount |
| Number of Terminals | 28 terminals |
| Package Code | QCCJ |
| Package Shape | Square |
| Terminal Form | J-bend |
| Temperature Grade | Commercial |
| Logic Family | CMOS |
ATF22V10CQZ-20JC square Pin Configuration Guide
Pin configuration for ATF22V10CQZ-20JC (square package). This digital IC includes GPIO, communication interfaces (UART, SPI, I2C), and power pins. Refer to the manufacturer datasheet for alternate pin functions and configuration options. Essential for embedded system design and PCB layout.
No detailed pinout data available for ATF22V10CQZ-20JC.
Refer to the datasheet for full pin configuration.
Typical Applications
ATF22V10CQZ-20JC is suitable for 6 applications: Industrial Control Logic, Legacy Interface Decoding, Embedded Control Glue Logic, Test and Measurement Instrumentation, Legacy Peripheral Adaptation, Programmable Control Panels.
Industrial Control Logic
The ATF22V10CQZ-20JC is suitable for compact control functions in industrial equipment that require 5 V CMOS logic and reprogrammable Boolean logic. Its 10 macrocells and allocation of 8 to 16 product terms per output are useful for motor-command decoding, interlock logic, state-machine outputs, and interface conditioning. Electrically erasable flash memory permits configuration changes without replacing the device, which can reduce board rework during equipment commissioning. The principal limitation is its commercial temperature grade and legacy lifecycle status. Confirm the ambient range, noise margins, supply tolerances, and expected service life before using it in new industrial production designs.
Recommended
Legacy Interface Decoding
The ATF22V10CQZ-20JC can decode command, address, or enable signals in legacy peripherals whose control logic is not implemented by the host processor. With 10 macrocells and 8 to 16 product terms per output, it can consolidate multiple combinational functions into one device while retaining CMOS- and TTL-compatible interfaces. The 20 ns speed grade provides deterministic propagation timing for conventional control paths. When adapting the part, verify every signal's fan-out, setup time, hold time, and active logic polarity. Electrically erasable configuration also allows board-level fixes without a full assembly redesign.
Recommended
Embedded Control Glue Logic
The ATF22V10CQZ-20JC is useful for implementing discrete glue logic around a microprocessor, microcontroller, or legacy peripheral controller. It can generate enables, qualify interrupts, translate state conditions, and combine unrelated Boolean terms through its 10 macrocells. The 5 V supply and CMOS/TTL compatibility allow use in established digital systems, while electrically erasable flash technology supports design iterations. Designers should avoid treating the PLD as a replacement for a real-time processor and should reserve it for deterministic Boolean functions. Validate signal timing against the host device and confirm that programming infrastructure remains available for production reprogramming.
Recommended
Test and Measurement Instrumentation
The ATF22V10CQZ-20JC can implement front-panel decoding, mode selection, relay-command generation, and status logic in test and measurement equipment. Its 10 macrocells are sufficient for combining multiple instrument-control functions, and the 20 ns grade is appropriate for ordinary control and address-decoding paths rather than high-speed data acquisition. The electrically erasable configuration is particularly useful when bringing up new instrument configurations because logic changes can be programmed before the PCB is finalized. Check input thresholds, output rise and fall times, and supply sequencing against the selected backplane architecture. For new platforms, assess whether a current MCU offers a lower support burden.
Recommended
Legacy Peripheral Adaptation
The ATF22V10CQZ-20JC is useful when adapting older bus signals, status flags, and interrupt lines to a newer controller. Each output can combine 8 to 16 product terms, allowing several address or command conditions to be consolidated without a gate-array implementation. CMOS- and TTL-compatible I/O simplifies interfacing with mixed-generation logic, and the 5 V operating requirement fits established peripheral boards. Nevertheless, output drive, input thresholds, and timing must be checked with the actual source and load devices. The programmable architecture helps during migration, but the NRND status and dependence on legacy programming tools make long-term sourcing evaluation essential.
Recommended
Programmable Control Panels
The ATF22V10CQZ-20JC can implement switch decoding, indicator-enable logic, mutually exclusive mode controls, and panel status functions in programmable control panels. Ten macrocells provide enough Boolean capacity for several panel conditions while keeping the design compact, and the electrically erasable configuration allows firmware-independent logic revisions. The 20 ns speed is more than adequate for human-interface control signals but does not provide the timing margins of an FPGA-based display controller. Use the manufacturer's pin description to assign configurable I/O safely. For new products with frequent feature changes, compare the engineering effort of this PLD against a microcontroller-based panel controller.
Recommended
Recommended Products Summary
Engineering reference data for ATF22V10CQZ-20JC — comparison, design guidance, and compliance information.
Selection Guide
Comparison with Alternatives
| Parameter | This Product | ATF22V10CQZ-20JI | ATF22V10CQZ-20JU | ATF22V10CQZ-20SU |
|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 28-PLCC (11.51 x 11.51 mm) | 28-PLCC (11.51 x 11.51 mm) | 28-PLCC (11.51 x 11.51 mm) | 28-PLCC (11.51 x 11.51 mm) |
| Device Type | Electrically erasable CMOS PLD | Electrically erasable CMOS PLD | Electrically erasable CMOS PLD | Electrically erasable CMOS PLD |
| Macrocells | 10 | 10 | 10 | 10 |
| Nominal Speed Grade | 20 ns | 20 ns | 20 ns | 20 ns |
| Supply Voltage | 5 V | 5 V | 5 V | 5 V |
| Programmable Technology | Electrically erasable flash memory | Electrically erasable flash memory | Electrically erasable flash memory | Electrically erasable flash memory |
| Maximum Standby Current | 25 uA | 25 uA | 25 uA | 25 uA |
| Input and Output Compatibility | CMOS and TTL compatible | CMOS and TTL compatible | CMOS and TTL compatible | CMOS and TTL compatible |
Key Differentiators
- Electrically erasable 22V10 implementation (vs ATF22V10CQZ-20JI)
- Commercial-temperature ordering configuration (vs ATF22V10CQZ-20JU)
- Directly identified package and configuration family (vs ATF22V10CQZ-20SU)
Design Notes
Do not treat a generic GAL22V10, PAL22V10, or another 22V10-family device as automatically interchangeable. The ATF22V10CQZ architecture is described as a superset of generic 22V10 architectures, but electrical compatibility still requires checking the exact pinout, supply voltage, I/O standards, programming method, and package. A PLCC footprint match alone is insufficient when the configuration scheme or pin function differs.
Use the manufacturer package drawing and pin-description table to establish PLCC orientation before routing. Confirm the J-bend package geometry, pin-1 marker, pad dimensions, and seating-plane clearance rather than copying dimensions from a generic PLCC footprint. Keep the solder profile compatible with the package body and lead pitch, and avoid applying excessive mechanical force to the finished ceramic package.
Place the 5 V decoupling capacitor close to the device supply pins and return the ground connection through a low-impedance path. Because the specified 25 uA maximum standby current applies to the low-power state, dynamic power and I/O loading can still increase board consumption during switching. Estimate worst-case activity and output loading, then verify supply droop and ground bounce with the actual external logic and programming circuitry.
Validate the programming ecosystem before releasing a production design. Confirm that the selected programmer supports the exact ATF22V10CQZ family, package, temperature suffix, and configuration operation, including read, program, verify, and erase functions where applicable. Electrically erasable capability does not eliminate the need for a controlled programming file, revision history, and post-program verification procedure.
For new designs, evaluate migration away from this legacy PLD family. A small microcontroller or current PLD may provide better tool support, more I/O, and a clearer long-term supply path. If the ATF22V10CQZ-20JC must be retained, isolate its logic functions behind stable interfaces, document every configurable pin and fuse state, and create a field-reprogramming plan that does not depend on unavailable or changing legacy tooling.
Compliance Information
The exact ordering code's environmental and material compliance declarations were not confirmed. Obtain the current manufacturer compliance documentation for ATF22V10CQZ-20JC before production release.