DP83902AVJG/NOPB 10BASE-T Ethernet Controller | Texas Instruments
MPN: DP83902AVJG/NOPB ✗ End of LifeDP83902AVJG/NOPB Overview
The device operates from a 4.75 V to 5.25 V supply and consumes approximately 140 mA. Its serial interface connects the controller to a host processor or system bus, while the integrated 10BASE-T physical layer supports connection to a twisted-pair network through external equalization resistors, transmit and receive filters, and a pulse transformer. This integration reduces the number of external network-interface components required for legacy Ethernet designs.
The DP83902A family supports loopback and diagnostic functions that are useful during board bring-up and network fault isolation. The 10BASE-T transceiver is intended to work with the appropriate external magnetics and filtering network, so the physical-layer implementation still requires careful PCB layout. Signal integrity on the twisted-pair side is particularly sensitive to component placement, trace symmetry, and separation between the controller, transformer, and analog network components.
Typical applications include legacy 10BASE-T industrial Ethernet terminals, embedded control systems, embedded test equipment, print servers, and legacy network interface adapters. The DP83902AVJG/NOPB is most appropriate when the target system specifically needs a 10BASE-T controller with an integrated transceiver and can be designed around the external pulse-transformer and filter requirements.
For new high-throughput networks, designers should evaluate whether 100BASE-TX or Fast Ethernet support is required before selecting this controller. When using the DP83902AVJG/NOPB, follow the manufacturer's reference design for the 10BASE-T analog network, keep the network-side traces short, and place the external filtering and transformer components according to the recommended layout to maintain reliable link performance.
Drop-in alternatives for DP83902AVJG/NOPB — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.
DP83902AVJG
✅ Drop-In📋 Reference alternative (not in catalog)
DP83902AVJG/NOPB Specifications
| Product Type | Serial network interface controller with integrated 10BASE-T transceiver |
| Manufacturer | Texas Instruments |
| Interface Type | Serial |
| Network Standard | IEEE 802.3 10BASE-T |
| Supply Voltage Range | 4.75 V to 5.25 V |
| Supply Current | 140 mA |
| Transceiver Functions | Receiver, transmitter, collision, heartbeat, loopback, jabber, and link-integrity blocks |
| Package | 100-QFP (14 mm x 14 mm) |
| Package Type | 100-pin QFP |
| Mounting Type | Surface Mount |
| Packaging | Tube |
| Temperature Grade | Commercial |
| External Network Components | Equalization resistors, transmit and receive filters, and pulse transformer |
| Loopback Support | Yes |
| Collision Detection Support | Yes |
| Heartbeat Function | Yes |
| Jabber Function | Yes |
| Link Integrity Function | Yes |
| RoHS Status | unknown |
| REACH Status | unknown |
DP83902AVJG/NOPB 100-pin qfp Pin Configuration Guide
Pin configuration for DP83902AVJG/NOPB (100-pin qfp package). Pin numbering, functions, and connection diagrams are defined in the manufacturer datasheet. Refer to it for the exact footprint and soldering guidelines.
No detailed pinout data available for DP83902AVJG/NOPB.
Refer to the datasheet for full pin configuration.
Typical Applications
DP83902AVJG/NOPB is suitable for 6 applications: Legacy 10BASE-T Industrial Terminal, Embedded Network Interface Controller, 10BASE-T Print Server, Industrial Ethernet Test Equipment, Legacy Network Interface Adapter, Embedded Control System with 10BASE-T Link.
Legacy 10BASE-T Industrial Terminal
The DP83902AVJG/NOPB suits an industrial terminal designed around a 10BASE-T network rather than a faster Ethernet standard. Its integrated receiver, transmitter, collision, heartbeat, loopback, jabber, and link-integrity blocks reduce the number of separate PHY functions on the board. Use the manufacturer 10BASE-T reference network with equalization resistors, transmit and receive filters, and a pulse transformer. The 4.75 V to 5.25 V supply range and approximately 140 mA specified consumption simplify integration into 5 V industrial control systems, while the 100-pin QFP package requires careful placement of the analog network section.
Recommended
Embedded Network Interface Controller
The DP83902AVJG/NOPB is appropriate when an embedded system already has a host processor interface and needs a dedicated twisted-pair Ethernet controller. The serial interface allows the network function to be managed separately from the processor's general-purpose I/O, while the integrated 10BASE-T transceiver handles the physical-layer functions listed in the IEEE 802.3 implementation. Designers should budget the 4.75 V to 5.25 V supply rail and approximately 140 mA current, then verify the host timing and signal levels against the pin-description tables in the manufacturer datasheet.
Recommended
10BASE-T Print Server
A legacy print server can use the DP83902AVJG/NOPB when 10BASE-T link speed and the existing network topology are sufficient. The controller's collision, heartbeat, jabber, and link-integrity blocks support the behavior expected of an IEEE 802.3 twisted-pair physical interface. The implementation must still include the external equalization resistors, filters, and pulse transformer, and the network-side layout should follow the manufacturer reference arrangement. Because the package is a 100-pin QFP, thermal and assembly planning should begin early rather than treating the analog section as a small add-on around a generic controller.
Recommended
Industrial Ethernet Test Equipment
The DP83902AVJG/NOPB can be used in legacy 10BASE-T test equipment, analyzers, and diagnostic products that need to exercise a real twisted-pair physical interface. Its loopback and link-integrity functions are useful for board-level testing and network fault isolation, while the integrated 10BASE-T transceiver avoids a separate physical-layer device in a straightforward design. The 100-pin QFP package and external analog network require careful partitioning between the digital host section and the network-side components. Validate the pulse transformer, filter layout, and transmission performance against the target test specification rather than assuming generic Ethernet compliance is sufficient.
Recommended
Legacy Network Interface Adapter
The DP83902AVJG/NOPB is a sensible choice for an adapter that converts an existing embedded host interface into a 10BASE-T twisted-pair connection. Since the transceiver, collision detection, heartbeat, and link-integrity functions are integrated, the adapter can be designed around a defined analog network section instead of combining separate Ethernet PHY blocks. The 4.75 V to 5.25 V operating range is compatible with 5 V designs, and the approximately 140 mA specified current should be included in the adapter power budget. Board assembly must account for the 100-pin QFP and the manufacturer-prescribed placement of the external pulse-transformer network.
Recommended
Embedded Control System with 10BASE-T Link
The DP83902AVJG/NOPB can serve as the network controller in an embedded control system that relies on a 10BASE-T link for supervisory communication. Its integrated physical-layer functions provide the specified receiver, transmitter, collision, heartbeat, loopback, jabber, and link-integrity behavior, while the serial interface keeps the network transaction separate from the controller's real-time functions. Use the manufacturer's external network design to maintain reliable operation, and isolate the sensitive analog section from high-current switching paths. The commercial temperature designation and 5 V supply range should be checked against the enclosure temperature and power architecture.
Recommended
Recommended Products Summary
Engineering reference data for DP83902AVJG/NOPB — comparison, design guidance, and compliance information.
Selection Guide
Comparison with Alternatives
| Parameter | This Product | DP83902AVJG |
|---|---|---|
| Package | 100-QFP (14 mm x 14 mm) | 100-QFP (14 mm x 14 mm) - same footprint |
| Brand | Texas Instruments | Texas Instruments |
| Product Type | Ethernet controller with integrated 10BASE-T PHY | Ethernet controller with integrated 10BASE-T PHY |
| Network Standard | IEEE 802.3 10BASE-T | IEEE 802.3 10BASE-T |
| Interface Type | Serial | Serial |
| Integrated Transceiver Functions | Receiver, transmitter, collision, heartbeat, loopback, jabber, link-integrity | Receiver, transmitter, collision, heartbeat, loopback, jabber, link-integrity |
| External Network Components | Equalization resistors, transmit and receive filters, pulse transformer | Equalization resistors, transmit and receive filters, pulse transformer |
Key Differentiators
- Same-brand same-footprint sourcing option (vs DP83902AVJG)
- Integrated physical-layer functions (vs DP83902AVJG)
- Established legacy Ethernet target (vs DP83902AV/NOPB)
Design Notes
Keep the DP83902AVJG/NOPB 10BASE-T analog network on the same board section as the specified equalization resistors, transmit and receive filters, and pulse transformer. Follow the manufacturer reference layout rather than substituting generic Ethernet magnetics without checking the network-side impedance and component values. The network-side traces should be short, symmetric, and separated from switching-node and high-current return paths.
Route the twisted-pair and filter connections as a controlled, tightly defined analog network. Avoid long stubs, vias, and ground-plane discontinuities between the controller pins and the external 10BASE-T components. Use a single consistent reference plane, keep return paths continuous, and validate the completed board with the manufacturer's network-implementation guidance before EMC or throughput testing.
Design the 5 V supply for the approximately 140 mA specified controller current plus the external network circuitry, while allowing additional margin for host-bus activity and temperature rise. Place local supply decoupling close to the device pins and keep the supply return path independent from the network-filter return where the reference design requires it. Confirm the actual operating-current profile on the assembled board.
Compliance Information
The exact RoHS, REACH, lead-free, halogen-free, and conflict-minerals status for DP83902AVJG/NOPB is not stated in the available manufacturer and distributor information. Confirm the current compliance documentation for the exact orderable suffix.