DSPIC33EP512MC204-H/ML - 16-Bit 60 MIPS DSC, 512KB Flash | Microchip
MPN: DSPIC33EP512MC204-H/ML ✓ Active| Qty | Unit Price | Extended |
|---|---|---|
| 1 | $0 | $0.00 |
| 10 | $0 | $0.00 |
| 100 | $0 | $0.00 |
| 500 | $0 | $0.00 |
| 1,000 | $0 | $0.00 |
DSPIC33EP512MC204-H/ML Overview
A digital signal controller combines the computational architecture of a microcontroller with DSP capabilities such as single-cycle multiply-accumulate and hardware divide, placing it in the product hierarchy: DSC -> 16-bit microcontroller -> embedded processor -> semiconductor. This makes the dsPIC33EP family particularly suited to control loops that need both deterministic MCU-style interrupt handling and DSP-style math, such as field-oriented motor control and digital power conversion.
Key features include 35 general-purpose I/O pins, 12 timers/counters, an operating supply from 3V, and a maximum operating temperature of 150C for this -H grade variant. The MCPWM (motor control PWM) module and QEI (quadrature encoder interface) peripherals identified in distributor data directly support precision motion applications without external logic.
On the technical side, the dsPIC33E core executes an enhanced 16-bit instruction set with DSP instructions, and the 44-QFN 8x8 mm exposed-pad package improves thermal dissipation and ground integrity for high-frequency switching designs. Multiple PGECx/PGEDx pin pairs support in-circuit serial programming (ICSP) and debugging - any pair may be used, but ICSPCLK and ICSPDAT must be taken from the matching pair, per Microchip programming documentation.
Typical applications include brushless DC and PMSM motor control, digital power supplies (PFC, LLC), industrial automation sensors, and audio or sensing signal processing where the DSP engine accelerates filtering and transform computations.
A key design consideration: all VDD and VSS pins must be connected during programming and operation, and decoupling capacitors should be placed directly at each supply pin to ensure the 60 MIPS core runs glitch-free.
This page synthesizes distributor pricing links, drop-in same-family alternatives, application guidance, and design notes not found in the manufacturer datasheet, with all data verified as of 2026-09-25.
Drop-in alternatives for DSPIC33EP512MC204-H/ML — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.
Variants in this series
Same-series models that are drop-in compatible with DSPIC33EP512MC204-H/ML (same form factor and footprint) — differing in Package, Core Architecture, RAM, RoHS Status, Series.
Quick Comparison Tool — Select alternative parts for side-by-side comparison:
DSPIC33EP256MC204-I/ML
✅ Drop-In ⚠️ Specs Unverified✓ In Stock
$3.4 / Unit
View Datasheet →DSPIC33EP128MC204-I/ML
✅ Drop-In ⚠️ Specs Unverified✓ In Stock
$2.98 / Unit
View Datasheet →DSPIC33EP64MC204-I/ML
✅ Drop-In ⚠️ Specs Unverified✓ In Stock
$3.6 / Unit
View Datasheet →DSPIC33EP32MC204-I/ML
✅ Drop-In ⚠️ Specs Unverified✓ In Stock
$2.05 / Unit
View Datasheet →DSPIC33EP16MC204-I/ML
✅ Drop-In ⚠️ Specs Unverified📋 Reference alternative (not in catalog)
DSPIC33EP512MC204-H/ML Maximum Ratings & Electrical Characteristics
| Core Architecture | 16-bit dsPIC33EP DSC core |
| Max CPU Speed | 60 MIPs |
| Program Memory Size | 512KB (170K x 24) Flash |
| Data RAM Size | 48KB |
| I/O Pins | 35 |
| Timers/Counters | 12 |
| Supply Voltage (Min) | 3 V |
| Operating Temperature (Max) | 150 C |
| Package | 44-QFN (8x8 mm), exposed pad |
| Mounting Type | Surface Mount |
| Special Peripherals | MCPWM, QEI |
| Technology | CMOS |
| Programming / Debug | ICSP via multiple PGECx/PGEDx pairs |
| Series | dsPIC33EP 33EP |
| Product Type | Digital Signal Controller (DSC) |
DSPIC33EP512MC204-H/ML 44-qfn (8x8 mm), exposed pad Pin Configuration Guide
Pin configuration for DSPIC33EP512MC204-H/ML (44-qfn (8x8 mm), exposed pad package). This digital IC includes GPIO, communication interfaces (UART, SPI, I2C), and power pins. Refer to the manufacturer datasheet for alternate pin functions and configuration options. Essential for embedded system design and PCB layout.
No detailed pinout data available for DSPIC33EP512MC204-H/ML.
Refer to the datasheet for full pin configuration.
Typical Applications
DSPIC33EP512MC204-H/ML is suitable for 6 applications: Precision BLDC/PMSM Motor Control, Digital Power Conversion (PFC, LLC), Industrial Automation and Sensing, Audio and Signal Processing, Embedded Control with ICSP Field Updates, Automotive-Adjacent High-Temperature Systems.
Precision BLDC/PMSM Motor Control
The DSPIC33EP512MC204-H/ML fits brushless DC and permanent-magnet synchronous motor drives because its MCPWM module generates complementary PWM with dead-time control while the QEI interface reads encoder feedback directly - per Jotrin distributor data, both peripherals are on-chip. The 60 MIPS DSP core executes field-oriented control (FOC) loops with single-cycle MAC instructions, achieving current-loop bandwidths suitable for servo and traction inverters. The 150C-capable -H temperature grade tolerates hot drive-enclosure environments where standard -I parts derisk margin. Use the 44-QFN exposed pad soldered to a ground plane to dissipate gate-driver-adjacent switching heat; keep PWM traces short to limit EMI radiated from the 8x8 mm package into encoder signal lines.
Recommended
Digital Power Conversion (PFC, LLC)
In digital power supplies, the DSPIC33EP512MC204-H/ML closes voltage and current loops in PFC and LLC stages using its high-resolution PWM and fast interrupt response at 60 MIPS. The DSP engine computes proportional-integral compensators each switching cycle, replacing analog error amplifiers with digitally tunable control that adapts across line and load conditions. The 512KB Flash accommodates multiple firmware profiles - startup sequencing, burst mode, and fault handling - in one device, and the 48KB RAM supports averaging filters for power-quality metrics. Layout practice: place the QFN near the PWM gate-driver pins, and keep analog sense routing away from high-dv/dt switch nodes to preserve ADC accuracy in the control loop.
Recommended
Industrial Automation and Sensing
Factory sensors, actuators, and HMI nodes benefit from the DSPIC33EP512MC204-H/ML's combination of 35 I/O pins, 12 timers, and DSP math. Sensor front-ends - such as vibrational or ultrasonic measurement - run FFT or FIR filtering in the DSP engine while general-purpose I/O and timers handle sequencing, gating, and communications. The 150C rating extends deployment into hot process areas (ovens, pumps, motor junction boxes) where standard 125C MCUs lose margin. The 44-QFN 8x8 footprint conserves board area in distributed I/O modules. Designers should connect all VDD/VSS pins with local decoupling and use a matched PGECx/PGEDx pair routed to a programming header for in-field firmware updates.
Recommended
Audio and Signal Processing
The single-cycle MAC and DSP instructions of the dsPIC33EP core let the DSPIC33EP512MC204-H/ML perform audio filtering, envelope detection, and lightweight codec support in embedded audio paths - intercoms, announcement systems, and acoustic sensors. With 512KB Flash and 48KB RAM, coefficient tables and double buffers fit on-chip, avoiding external memory latency in real-time streams. The 60 MIPS budget leaves headroom above a 48 kHz sample-rate processing chain. Note the trade-off: this is a general DSC, not a dedicated audio DSP, so licensed software codecs must be sized carefully against the 48KB RAM. Bypass the analog supply pin with 0.1uF ceramics placed at the QFN edge to keep supply noise out of sampling paths.
Recommended
Embedded Control with ICSP Field Updates
Products requiring field firmware updates use the DSPIC33EP512MC204-H/ML's multiple PGECx/PGEDx programming pairs: per NorthernSoftware documentation, ICSP works with NSDSP-1/2/3 programmers and any PGECx/PGEDx pair, provided ICSPCLK and ICSPDAT come from the same pair. Bootloader firmware stored in the 512KB Flash enables self-updating applications without removing the board. The 150C grade and 44-QFN exposed pad allow programming headers in sealed, hot enclosures. Design rule: route one complete PGEC/PGED pair plus MCLR to a 5-pin tag-connect footprint, and ensure all VDD/VSS pins are powered during any programming operation - a partially powered QFN is a common cause of failed field updates.
Recommended
Automotive-Adjacent High-Temperature Systems
With a maximum operating temperature of 150C per datasheets.com data, the -H grade DSPIC33EP512MC204-H/ML suits high-temperature zones near engines, hydraulic units, and industrial heaters - applications that share environmental requirements with automotive under-hood electronics. The 60 MIPS core runs control and diagnostics concurrently, and 35 I/O pins interface with position sensors, valve drivers, and communication transceivers. Designers must derisk self-heating: in a 44-QFN 8x8 package, junction rise depends on PCB copper area, so a solid ground plane under the exposed pad plus thermal vias is recommended. Confirm the exact ambient-versus-load derating curve in the Microchip datasheet before qualifying the design for the target thermal environment.
Recommended
Recommended Products Summary
Engineering reference data for DSPIC33EP512MC204-H/ML — comparison, design guidance, and compliance information.
Selection Guide
Comparison with Alternatives
| Parameter | This Product | DSPIC33EP256MC204-I/ML | DSPIC33EP128MC204-I/ML | DSPIC33EP64MC204-I/ML | DSPIC33EP32MC204-I/ML | DSPIC33EP16MC204-I/ML |
|---|---|---|---|---|---|---|
| Package | 44-QFN (8x8 mm) | 44-QFN (8x8) - same | 44-QFN (8x8) - same | 44-QFN (8x8) - same | 44-QFN (8x8) - same | 44-QFN (8x8) - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| CPU Speed | 60 MIPs | 60 MIPs | 60 MIPs | 60 MIPs | 60 MIPs | 60 MIPs |
| Flash Memory | 512KB (170K x 24) | 256KB (85K x 24) | 128KB (43K x 24) | 64KB (22K x 24) | 32KB (11K x 24) | 16KB (5.5K x 24) |
| I/O Pins | 35 | 35 | 35 | 35 | 35 | 35 |
| Timers | 12 | 12 | 12 | 12 | 12 | 12 |
| Temperature Grade | -H grade, max 150 C | -I grade (industrial) | -I grade (industrial) | -I grade (industrial) | -I grade (industrial) | -I grade (industrial) |
| Motor Control Peripherals | MCPWM, QEI | MCPWM, QEI | MCPWM, QEI | MCPWM, QEI | MCPWM, QEI | MCPWM, QEI |
Key Differentiators
- 512KB Flash - the largest memory option in the MC204 pin family (vs DSPIC33EP256MC204-I/ML)
- 150C-capable -H temperature grade (vs DSPIC33EP256MC204-I/ML)
- Trade-off: premium over lower-memory family members (vs DSPIC33EP16MC204-I/ML)
Design Notes
Solder the 44-QFN exposed pad to a continuous ground plane with an array of thermal vias. The exposed pad is the primary thermal and low-inductance ground path for the die; without it, 60 MIPS core switching noise couples into analog peripherals and thermal margin drops substantially. Per NorthernSoftware dsPIC33EP512MC204 notes, all VSS and VDD pins must be connected - a common prototype failure is a single unconnected supply pin on the QFN causing erratic behavior or failed ICSP programming.
When wiring the ICSP header, remember that PGECx and PGEDx must be used as a matched pair: if PGEC2 carries ICSPCLK, then ICSPDAT must connect to PGED2. Mixing pairs from different pairs is a frequent cause of 'device not detected' errors. Also confirm the -H temperature grade is what your BOM actually needs - the -H part is typically priced higher than the -I grade, and substituting -I variants saves cost in 125C-max designs.
Power the DSC from a clean 3.0-3.6V rail (minimum 3V per datasheets.com data). Place 0.1uF ceramic decoupling capacitors directly at each VDD pin pair of the 44-QFN, plus one bulk 4.7-10uF capacitor near the package. In motor-control layouts, keep the DSC ground referenced to the exposed pad star point, and route PWM outputs away from analog sense lines to protect the ADC from dv/dt coupling from the MCPWM switching edges.
Compliance Information
Compliance status was not stated in the provided verified web data; confirm RoHS/REACH/lead-free status on the Microchip product page or distributor compliance documents before procurement.