ISL81486IU - 5V 40Mbps RS-485/RS-422 Transceiver | Renesas
MPN: ISL81486IU ✓ ActiveISL81486IU Overview
A transceiver is an interface circuit that converts logic-level transmit and receive signals into balanced differential bus signals, then reconstructs the received signal. The ISL81486IU belongs to the RS-485/RS-422 interface IC hierarchy, where differential signaling improves noise immunity and allows reliable data transfer over longer cables than conventional single-ended interfaces.
Key features include a 5 V supply, operation up to 40 Mbps, support for PROFIBUS, and BiCMOS circuit technology. These characteristics suit industrial automation, factory equipment, PROFIBUS nodes, process-control equipment, and other systems that combine long cable runs with demanding data rates. Its half-duplex architecture supports one driver and one receiver in a shared eight-pin package.
The device is designed to conserve board space compared with separate driver and receiver packages. The MSOP outline also supports dense industrial-control assemblies, although exposed-pad thermal performance and PCB copper must be considered when the device dissipates substantial power. Differential bus routing, controlled impedance, and proper termination remain central to achieving reliable operation at the upper end of its 40 Mbps capability.
Typical uses include high-speed RS-485 links in factory automation, RS-422 point-to-point links, PROFIBUS-compatible equipment, industrial controllers, data-acquisition systems, and communication interfaces operating from a 5 V rail. Because the bus topology determines correct operation, the network should use twisted-pair cabling, appropriate termination, and a common reference strategy between connected nodes.
Designers should follow the manufacturer datasheet for the exact pin assignment, enable and receiver-enable behavior, driver output levels, receiver thresholds, and recommended external components. The part number suffix IU identifies the specified package/order configuration, but the package drawing and pin description should always be checked against the exact ordering code before PCB release.
This page organizes the device’s interface role, package constraints, application fit, and verified ordering information into a design-oriented overview. It also distinguishes true same-package alternatives from parts that may only offer similar electrical functions, helping engineers assess PCB reuse without overlooking protocol, speed, or enable-control differences.
Drop-in alternatives for ISL81486IU — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.
Variants in this series
Same-series models that are drop-in compatible with ISL81486IU (same form factor and footprint) — differing in Maximum Data Rate, Package, Product Type.
ISL81486IUZ
✅ Drop-In📋 Reference alternative (not in catalog)
ISL81486IU-T
✅ Drop-In📋 Reference alternative (not in catalog)
ISL81485IU
✅ Drop-InContact for price
View Datasheet →ISL4486IU
✅ Drop-In📋 Reference alternative (not in catalog)
ISL83072EIUZA-T
✅ Drop-In📋 Reference alternative (not in catalog)
ISL81486IU Specifications
| Product Type | RS-485/RS-422 half-duplex transceiver |
| Supply Voltage | 5 V |
| Maximum Data Rate | 40 Mbps |
| Supported Standards | RS-485 and RS-422 |
| PROFIBUS Support | Yes |
| Circuit Technology | BiCMOS |
| Transceiver Configuration | 1 transmitter and 1 receiver |
| Duplex Mode | Half-duplex |
| Package | 8-pin MSOP |
| Pin Count | 8 pins |
ISL81486IU 8-pin msop Pin Configuration Guide
Pin configuration for ISL81486IU (8-pin msop package). Pin numbering, functions, and connection diagrams are defined in the manufacturer datasheet. Refer to it for the exact footprint and soldering guidelines.
No detailed pinout data available for ISL81486IU.
Refer to the datasheet for full pin configuration.
Typical Applications
ISL81486IU is suitable for 6 applications: PROFIBUS Industrial Communication, High-Speed RS-485 Bus, Point-to-Point RS-422 Link, Factory Automation Controller, Industrial Data Acquisition, Instrumentation and Test Equipment.
PROFIBUS Industrial Communication
The ISL81486IU fits PROFIBUS interface nodes because the manufacturer identifies the device as a 5 V, ultra-high-speed PROFIBUS, RS-485/RS-422 transceiver with operation up to 40 Mbps. Its integrated driver and receiver provide the balanced physical layer for controllers, sensors, actuators, and industrial I/O modules connected to a PROFIBUS segment. In this topology, the transceiver converts logic signals into a differential bus waveform and receives the corresponding differential input. The high-rate capability provides useful timing margin for short, well-controlled industrial segments, although actual PROFIBUS compliance also depends on network length, cable type, termination, connector wiring, and device-level timing. Engineers should preserve the balanced pair as a routed differential pair, apply the network’s prescribed termination, and verify grounding and common-mode behavior across the complete segment.
Recommended
High-Speed RS-485 Bus
The ISL81486IU is appropriate for a 5 V RS-485 bus that needs substantially more signaling speed than conventional low-rate transceivers. Its stated 40 Mbps capability supports short, point-to-point or lightly loaded multipoint links where propagation delay and skew remain manageable. The balanced differential driver and receiver improve rejection of common-mode noise compared with a single-ended interface, while the half-duplex arrangement allows the same pair of conductors to carry data in either direction. For a robust implementation, place termination only where required by the topology, avoid excessive stub lengths, route the differential pair over a continuous reference plane, and test the assembled cable and transceiver combination. These practices are especially important because a transceiver rated for 40 Mbps does not guarantee that every cable, connector, and grounding arrangement can preserve that rate.
Recommended
Point-to-Point RS-422 Link
The ISL81486IU can serve as the physical-layer device in a point-to-point RS-422 connection where a source drives a remote receiver over a twisted pair. RS-422 is suited to one-to-one communication and balanced signaling, and the transceiver’s stated 40 Mbps rate allows short links to operate with substantial bandwidth margin. The device combines the balanced transmitter and receiver in an 8-pin MSOP, reducing the footprint compared with separate interface packages. In a practical link, terminate the receiving end in accordance with the selected network strategy, keep the cable pair tightly twisted, and provide a suitable reference connection if the source and receiver grounds are not locally common. Engineers should also evaluate propagation delay, skew, input thresholds, and maximum cable length from the manufacturer electrical tables before treating the link specification as complete.
Recommended
Factory Automation Controller
The ISL81486IU is well suited to compact factory-automation controllers that exchange high-speed data with remote modules over balanced industrial wiring. Its 5 V supply fits many embedded control assemblies, while the 40 Mbps capability supports communication links whose timing must remain predictable inside equipment racks or across short machine distances. The 8-pin MSOP package allows the interface to be placed near a connector or processor without occupying the board area of two separate line-interface devices. Designers should keep the driver and receiver traces symmetrical, provide local supply decoupling, and keep protection or isolation components outside the high-speed differential path unless their propagation delay has been included in the system budget. Industrial enclosure grounding and surge protection remain separate from logic functionality and should be engineered for the installation environment.
Recommended
Industrial Data Acquisition
The ISL81486IU can form the communications link in a data-acquisition system that distributes measurements from remote sensors or machine controllers. Balanced differential signaling helps maintain data integrity when the acquisition cabinet is connected to field equipment through cables that may pick up industrial noise. The transceiver’s 40 Mbps capability is valuable when the acquisition backplane must carry bursts of data, synchronize equipment, or support a multi-drop bus with short branches. The device should be placed near the protected cable entry point, with its differential route separated from switching power and motor-control traces. Add termination and biasing according to the selected network configuration, and verify common-mode limits for every connected node. A logic-level analysis at the transceiver pins is often more informative than relying only on a bus analyzer when diagnosing installation-specific signal-integrity problems.
Recommended
Instrumentation and Test Equipment
The ISL81486IU is appropriate for instrumentation modules that require a compact, high-speed balanced communication interface. Test and measurement equipment often connects an instrument to a remote fixture, controller, or workstation over a cable that extends beyond the enclosure. The 5 V transceiver can preserve data integrity in that environment through differential signaling, while its 40 Mbps capability supports dense measurement data and low-latency control traffic. The MSOP footprint is especially useful in multi-channel instruments where each channel may require a communications interface. Layout should provide a short path from the transceiver to the connector, avoid splitting the differential pair around other circuitry, and maintain a continuous ground reference. If the instrument can be connected to equipment at different ground potentials, add an appropriate isolation strategy rather than assuming the transceiver's common-mode limits will cover every installation.
Recommended
Recommended Products Summary
Engineering reference data for ISL81486IU — comparison, design guidance, and compliance information.
Selection Guide
Comparison with Alternatives
| Parameter | This Product | ISL81486IUZ | ISL81486IU-T | ISL81485IU | ISL4486IU | ISL83072EIUZA-T |
|---|---|---|---|---|---|---|
| Package | 8-pin MSOP | 8-pin MSOP | 8-pin MSOP | 8-pin MSOP | 8-pin MSOP | 8-pin MSOP |
| Brand | Renesas Electronics | Renesas Electronics | Renesas Electronics | Renesas Electronics | Renesas Electronics | Renesas Electronics |
| Ordering Configuration | ISL81486IU | ISL81486IUZ suffix | ISL81486IU-T suffix | ISL81485IU suffix | ISL4486IU suffix | ISL83072EIUZA-T suffix |
Key Differentiators
- Higher stated bus rate for high-speed industrial links (vs ISL81485IU)
- Purpose-built 5 V BiCMOS high-speed balanced interface (vs ISL83072EIUZA-T)
- Integrated PROFIBUS-oriented driver and receiver in a compact package (vs ISL4486IU)
- Closest ordering alternatives preserve the 8-pin MSOP footprint (vs ISL81486IUZ)
Design Notes
Route the differential bus as a tightly coupled pair over a continuous ground plane, keeping the two traces at a matched length where channel skew matters. Place the transceiver close to the connector or protected board edge, and avoid routing the pair through test pads, stubs, or layers that interrupt coupling. Keep switching regulators, relays, and high-current traces away from the bus path. At rates approaching 40 Mbps, connector and cable discontinuities can be more damaging than the apparent rise time of the IC.
Do not assume that every part sharing the 8-pin MSOP outline is electrically interchangeable. Compare supply limits, driver enable and receiver enable polarity, receiver thresholds, propagation delay, fail-safe behavior, and bus-output states before substitution. In particular, the ISL81485IU and ISL83072EIUZA-T candidates may use the same land pattern while differing in timing or control behavior. Record the exact manufacturer ordering suffix and test bus idle, dominant, turnaround, and receive states on assembled hardware.
Use a low-impedance 5 V supply with local high-frequency decoupling placed close to the device’s supply and ground pins. Determine the actual supply-current requirement from the manufacturer electrical tables for the selected operating mode, driver state, and load. Account for line-driver dissipation and connector/cable loading in the power budget. If protection components are added for industrial surge or ESD requirements, include their capacitance and leakage in the high-speed timing and common-mode analysis.
Design termination and any biasing network for the actual network topology rather than adding both indiscriminately. In a point-to-point RS-422 link, the receiver is commonly the terminated endpoint; in a multidrop RS-485 network, termination is normally placed at the physical ends, and biasing provides a defined idle state where required. Validate propagation delay, inter-symbol interference, common-mode range, and connector reflections across the longest cable and fastest operating mode before production release.
Compliance Information
The listed product pages do not provide explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations for this ordering configuration.