M30624FGPFP - 16-Bit 24MHz 256KB MCU | Renesas | 100-QFP
MPN: M30624FGPFP ✓ Active| Qty | Unit Price | Extended |
|---|---|---|
| 1 | $0 | $0.00 |
| 10 | $0 | $0.00 |
| 100 | $0 | $0.00 |
| 500 | $0 | $0.00 |
| 1,000 | $0 | $0.00 |
M30624FGPFP Overview
A microcontroller is a programmable system-on-chip that integrates a CPU core, memory, timers, serial interfaces, analog peripherals, and I/O into one package. The M16C/62P architecture combines a 16-bit instruction set with sophisticated, efficient instructions, supporting embedded control in industrial, consumer, communications, and appliance equipment. The verified distributor listing identifies the MCU as operating at 3/5 V.
Key verified attributes include a 16-bit CPU, 24 MHz maximum operating frequency, 256 KB organized as 256K x 8 flash memory, and a 100-QFP package. A lead-free M30624FGPFP#U5C ordering variant is listed by Mouser. The exact RAM capacity, peripheral complement, timer channels, ADC characteristics, operating-temperature range, and I/O ratings were not supplied in the verified source data and require confirmation from the manufacturer datasheet.
Technically, the part belongs to the M16C/60 family using the M16C/60 Series CPU core. Its 16-bit architecture is relevant to control loops and embedded workloads requiring more arithmetic capability than a basic 8-bit MCU. The 256 KB flash capacity provides substantially more on-chip program storage than many small 8-bit controllers. The 100-QFP format offers a high pin count, potentially supporting dedicated peripheral and general-purpose I/O, but exact signal assignment must be taken from the datasheet rather than inferred.
Typical application categories include industrial controllers, factory equipment, motor and machine control, communications equipment, test and measurement instruments, and consumer appliances. These uses align with the MCU category and high-pin-count package, although the manufacturer datasheet should be checked for specific peripheral support before design selection.
Design planning must account for the 3/5 V supply indication, programming requirements, oscillator and reset circuitry, decoupling, and all 100 physical pins. Firmware migration is especially important because Renesas directs new-system designs toward M3062LFGPFP rather than the older M30624FGPFP. Review current lifecycle status and obtain authoritative technical support before committing a new production design.
This page consolidates verified distributor specifications, the manufacturer migration notice, and engineering-oriented replacement guidance. It separates confirmed values from missing data so engineers can make an informed sourcing decision without treating incomplete search snippets as full datasheet specifications.
Drop-in alternatives for M30624FGPFP — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.
Variants in this series
Same-series models that are drop-in compatible with M30624FGPFP (same form factor and footprint) — differing in Series, Package, A/D Converter, Operating Temperature, Supply Voltage.
Quick Comparison Tool — Select alternative parts for side-by-side comparison:
M3062LFGPFP
✅ Drop-In📋 Reference alternative (not in catalog)
M30624FGPFP#U3C
✅ Drop-In✓ In Stock
$10.95 / Unit
View Datasheet →M30624FGPFP#U5C
✅ Drop-In✓ In Stock
$22.1 / Unit
View Datasheet →M30624FGPFP#D9C
✅ Drop-In📋 Reference alternative (not in catalog)
M30624FGPFP Maximum Ratings & Electrical Characteristics
| Product Type | 16-bit CMOS microcontroller |
| Series | M16C/60 and M16C/62P |
| CPU Core | M16C/60 Series CPU core |
| CPU Word Size | 16 bit |
| Maximum Operating Frequency | 24 MHz |
| Flash Memory | 256 KB (256K x 8) |
| Supply Voltage | 3/5 V |
| Package | 100-QFP (14 x 20 mm) |
| Pin Count | 100 pins |
| Manufacturing Process | High-performance silicon-gate CMOS |
| Device Classification | Single-chip 16-bit CMOS microcomputer |
| Lead-Free Ordering Variant | M30624FGPFP#U5C listed as Pb-free |
M30624FGPFP 100-qfp (14 x 20 mm) Pin Configuration Guide
Pin configuration for M30624FGPFP (100-qfp (14 x 20 mm) package). This digital IC includes GPIO, communication interfaces (UART, SPI, I2C), and power pins. Refer to the manufacturer datasheet for alternate pin functions and configuration options. Essential for embedded system design and PCB layout.
No detailed pinout data available for M30624FGPFP.
Refer to the datasheet for full pin configuration.
Typical Applications
M30624FGPFP is suitable for 6 applications: Industrial Machine Controllers, Motor and Automation Control, Communications Equipment, Test and Measurement Instruments, Consumer Appliance Control, IoT Gateway and Sensor Node.
Industrial Machine Controllers
The M30624FGPFP fits legacy industrial machine-control architectures that need a 16-bit CPU, 24 MHz processing, and 256 KB of flash rather than the limited storage of a small 8-bit controller. Its 100-QFP package provides many physical pins, which is useful when a board requires several digital I/O and dedicated peripheral connections. However, the verified data does not enumerate ADC channels, timer counts, serial interfaces, isolation ratings, or industrial temperature limits. Before adoption, engineers should confirm those specifications, controller-specific interrupt behavior, and long-term availability in the Renesas M16C/62P hardware manual.
Recommended
Motor and Automation Control
A 16-bit MCU operating at up to 24 MHz is potentially appropriate for embedded motor-control and automation logic where arithmetic throughput, deterministic interrupts, and multiple I/O resources matter more than minimal cost. The M30624FGPFP's 256 KB flash can hold control firmware, while its 100-QFP package offers a broad pin count for control signals. Its suitability depends on unverified details such as timer channels, PWM resolution, encoder interfaces, analog inputs, and protective functions. Engineers must match those requirements to the manufacturer datasheet and validate timing at the intended clock and operating voltage.
Recommended
Communications Equipment
M30624FGPFP can serve as the control processor in communications equipment that needs local protocol handling, status logic, and configurable digital interfaces. Its 16-bit CPU and 256 KB flash provide a larger program and arithmetic budget than many basic 8-bit controllers, while the 100-QFP package can support several external signal lines. Exact UART, SPI, I2C, CAN, USB, and other interface availability was not present in the verified snippets and must not be inferred from the family name. Firmware porting should therefore begin with a complete peripheral map from the current Renesas documentation.
Recommended
Test and Measurement Instruments
The M30624FGPFP is relevant to legacy test and measurement instruments that combine sequencing, panel control, data acquisition, and communications in one embedded platform. A 16-bit CPU at up to 24 MHz supports more complex state-machine and signal-processing work than a basic 8-bit MCU, and 256 KB flash provides useful code capacity. The verified material does not establish precision-ADC performance, analog noise, timer accuracy, or operating-temperature limits, all of which are critical for measurement instruments. Instrumentation designs should verify analog specifications and calibration requirements before relying on this MCU.
Recommended
Consumer Appliance Control
For a legacy appliance-control platform, M30624FGPFP combines a 16-bit processor, 24 MHz clock, and 256 KB flash with a high-pin-count package capable of supporting numerous control and sensing connections. It may be useful when maintaining an existing M16C-based product rather than redesigning around a lower-cost MCU. Compatibility with a new appliance design remains conditional because the verified data does not specify RAM, safety features, standby behavior, brownout response, or exact peripheral resources. Engineers should compare the successor M3062LFGPFP and complete the manufacturer migration review.
Recommended
IoT Gateway and Sensor Node
M30624FGPFP can form the local control core of a sensor node or gateway when firmware needs more memory and control capability than an 8-bit MCU provides. The 256 KB flash supports a larger embedded application, and the 100-QFP package offers numerous I/O opportunities for sensors, indicators, and communications. It does not include a wireless radio, and the verified data does not identify low-power modes, analog converters, or network controllers. A practical design would pair it with an appropriate transceiver and verify standby current, wake timing, and environmental ratings from the full manufacturer documentation.
Recommended
Recommended Products Summary
Engineering reference data for M30624FGPFP — comparison, design guidance, and compliance information.
Selection Guide
Comparison with Alternatives
| Parameter | This Product | M3062LFGPFP | M30624FGPFP#U3C | M30624FGPFP#U5C | M30624FGPFP#D9C |
|---|---|---|---|---|---|
| Brand | Renesas Electronics | Renesas Electronics | Renesas Electronics | Renesas Electronics | Renesas Electronics |
| New-Design Recommendation | Renesas directs designers to M3062LFGPFP for new systems | Recommended successor for new systems | Legacy base-device ordering code | Lead-free ordering variant | Alternative legacy ordering code |
Key Differentiators
- Manufacturer-identified successor path (vs M3062LFGPFP)
- High on-chip program storage (vs LPC11C14FBD48/301)
- High-pin-count legacy control platform (vs LPC11C14FBD48/301)
- Explicit lead-free ordering option (vs M30624FGPFP#U3C)
Design Notes
Do not begin a new M30624FGPFP-based design without reviewing the Renesas migration statement. The manufacturer explicitly instructs users to adopt M3062LFGPFP for new systems. Existing software, startup code, bootloader behavior, memory maps, and peripheral configuration may require changes. Use the current M16C/62P datasheet and hardware manual to build a side-by-side compatibility matrix before changing the component on an existing PCB.
Design the 3/5 V supply path around the exact electrical characteristics in the official datasheet, because those limits were not included in the verified excerpts. Provide local high-frequency decoupling at VDD pins, maintain the required bulk capacitance, and route power and ground planes to minimize loop area. Confirm absolute maximum voltage, operating voltage, brownout behavior, and supply-current limits for the selected ordering code before finalizing the power tree.
The 100-QFP footprint requires assembly-process verification for lead pitch, board orientation, solder-mask definition, pad length, and courtyard clearance. Do not derive a land pattern solely from the distributor's 14 x 20 mm package description. Use the current Renesas package drawing and PCB design guidance, and inspect fine-pitch bridges during prototype assembly before authorizing volume production.
Ordering-code suffixes such as U3C, U5C, and D9C must not be treated as interchangeable without checking their commercial, temperature, or grade attributes. Mouser identifies U5C as Pb-free, while the supplied data does not define how these suffixes differ electrically or for lifecycle. Purchase using the exact approved suffix and request manufacturer documentation when the suffix meaning is not visible in the product-page summary.
Compliance Information
Mouser explicitly describes the M30624FGPFP#U5C ordering variant as Pb-free. Other compliance fields were not established by the supplied verified excerpts and remain unknown.
