MAX3243ECPWG4 - 3/5 RS-232 Transceiver 28-TSSOP | Texas Instruments
N.º da peça: MAX3243ECPWG4 ✗ Fim de vidaMAX3243ECPWG4 Visão geral
An RS-232 transceiver combines the electrical interface functions required by a serial communications port. The driver section translates digital logic levels into RS-232 line signals, while the receiver section converts incoming line signals into logic-compatible outputs. A multichannel device such as the MAX3243ECPWG4 supports three driver channels and five receiver channels, allowing a system to implement several serial links without using separate single-channel transceivers. The family is commonly positioned for point-to-point RS-232 equipment, industrial control interfaces, and legacy peripheral connections.
The MAX3243E family supports supply voltages from 3 V to 5.5 V, making it suitable for systems with 3.3-V or 5-V digital rails. The device includes ±15-kV IEC ESD protection on its external RS-232 connections, helping protect interface circuitry when cables are connected to user-accessible equipment. The MAX3243ECPWG4 is specified in a 28-TSSOP package with a 4.40-mm body width, and the commercial temperature range covers 0°C to 70°C.
Use the manufacturer datasheet and package drawing to confirm the exact pin functions, exposed-pad arrangement, decoupling requirements, and recommended external charge-pump capacitors. The MAX3243E family operates as a multichannel RS-232 interface rather than as a voltage regulator or logic IC, so its power, ground, and signal connections should follow the device-specific application circuit. Request a quote through the XAIPART Request a Quote form for current commercial sourcing information.
This page summarizes the device's RS-232 interface role, key electrical ratings, package information, and practical design considerations. It also distinguishes the obsolete MAX3243ECPWG4 ordering code from available family members and drop-in candidates, helping engineers make a controlled replacement decision rather than relying on package similarity alone.
Alternativas drop-in para MAX3243ECPWG4 — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com MAX3243ECPWG4 (mesmo formato e footprint) — diferindo em Maximum Data Rate, ESD Protection, Interface Standard, Package.
MAX3243ECPW
✅ Drop-InConsulte o preço
Ver ficha técnica →SP3243EBCY-L
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
MAX3243ECPWG4 Especificações
| Product Type | Multichannel RS-232 line driver/receiver |
| Number of Drivers | 3 |
| Number of Receivers | 5 |
| Supply Voltage Range | 3 V to 5.5 V |
| Maximum Data Rate | 500 kbps |
| ESD Protection | ±15 kV IEC ESD protection |
| Duplex | Full duplex |
| Receiver Hysteresis | 500 mV |
| Faixa de temperatura de operação | 0°C to 70°C |
| Temperature Grade | Commercial |
| Encapsulamento | 28-TSSOP |
| Package Body Width | 4.40 mm |
| Tipo de montagem | Surface mount |
| Number of Terminals | 28 |
| Terminal Form | Gull wing |
| Package Shape | Rectangular |
| Peak Reflow Temperature | 260°C |
Guia de Configuração de Pinos do MAX3243ECPWG4 rectangular
Configuração de pinos para MAX3243ECPWG4 (pacote rectangular). A numeração dos pinos, funções e diagramas de conexão estão definidos no datasheet do fabricante. Consulte-o para o footprint exato e diretrizes de soldagem.
Nenhum dado detalhado de pinagem disponível para MAX3243ECPWG4.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
MAX3243ECPWG4 é adequado para 6 aplicaçãos: Industrial RS-232 Control Interfaces, Point-to-Point Serial Links, Instrumentation and Test Equipment, Legacy Peripheral Connectivity, Multiport Data Acquisition, Commercial Communication Equipment.
Industrial RS-232 Control Interfaces
The MAX3243ECPWG4 is suitable for legacy industrial controllers that expose multiple RS-232 ports to instruments, service equipment, or configuration tools. Its 3-to-5.5-V supply range allows operation beside 3.3-V or 5-V digital logic, while 3 drivers and 5 receivers provide asymmetric channel support for monitoring and control. The ±15-kV IEC ESD protection strengthens the cable-facing interface, but it does not eliminate the need for chassis grounding or connector-level protection.
Recomendado
Point-to-Point Serial Links
Use the MAX3243ECPWG4 when a system must support several point-to-point RS-232 links without allocating one transceiver package per direction. The three drivers support three outbound channels, while five receivers can monitor five inbound signals, allowing asymmetrical equipment arrangements. Its commercial 0°C-to-70°C temperature grade and 3-V-to-5.5-V supply range are suitable for indoor commercial equipment, with system designers still responsible for cable length, signal integrity, and grounding.
Recomendado
Instrumentation and Test Equipment
The MAX3243ECPWG4 can serve older test and measurement equipment that must communicate with host computers or service interfaces through RS-232. The multichannel arrangement is useful for receiving commands or status from several peripherals while driving selected devices. Because the MAX3243ECPWG4 is obsolete, new instrument designs should verify current family alternatives, confirm the 500-kbps manufacturer product-page rating, and reproduce the recommended charge-pump and bypass-capacitor layout.
Recomendado
Legacy Peripheral Connectivity
The MAX3243ECPWG4 is appropriate for maintaining compatibility with legacy RS-232 peripherals in industrial, medical-equipment, and laboratory systems. Its 5 receivers allow multiple peripheral status lines to be monitored, while 3 drivers handle command or control outputs. The integrated IEC ESD protection is especially relevant where the interface connects to external cables, although medical and laboratory installations still need appropriate isolation, grounding, and safety validation outside the IC itself.
Recomendado
Multiport Data Acquisition
A multiport acquisition system can use the MAX3243ECPWG4 to consolidate several RS-232 links into one host interface. Five receiver channels help collect equipment status or asynchronous reports, while three driver channels support configuration commands to selected instruments. The 3-V-to-5.5-V operating range supports mixed-voltage system architectures, and the 28-TSSOP package keeps the interface compact. Design the external network and protection scheme so that ground potential differences do not create interface stress.
Recomendado
Commercial Communication Equipment
The MAX3243ECPWG4 fits commercial equipment that retains RS-232 for configuration, diagnostics, or service access while other interfaces handle modern data exchange. Three transmit channels and five receive channels offer practical flexibility for asymmetric command and status traffic. Its 0°C-to-70°C commercial range and 3-V-to-5.5-V supply operation suit indoor products. For new production, compare current same-family and cross-brand 28-TSSOP candidates and verify connector-level ESD and surge protection independently.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para MAX3243ECPWG4 — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | MAX3243ECPW | SP3243EBCY-L |
|---|---|---|---|
| Package | 28-TSSOP | 28-TSSOP | 28-TSSOP |
| Brand | Texas Instruments | Texas Instruments | Exar |
Principais diferenciais
- Asymmetric multichannel RS-232 interface (vs SP3243EBCY-L)
- Manufacturer-identified ESD protection (vs SP3243EBCY-L)
- Documented package-compatible same-family path (vs MAX3243ECPW)
Notas de projeto
Do not treat a 28-TSSOP footprint as sufficient proof of replacement compatibility. Confirm the complete numbered pin map, charge-pump capacitor connections, supply decoupling pins, receiver enable or shutdown functions, and the location of every RS-232 line. The MAX3243ECPWG4 and its candidate replacements use the same package outline, but the manufacturer datasheet must still be checked before a PCB or BOM change is released.
Place the IC close to the RS-232 connector and keep the cable-facing traces short. Follow the manufacturer application circuit for the external charge-pump capacitors and place input and output bypass capacitors close to their designated pins. Keep long logic and return paths away from RS-232 conductors where practical, and provide a continuous chassis or signal-ground strategy at the connector.
RS-232 receivers can respond to ground-potential differences and cable-borne transients even when the IC includes ±15-kV IEC ESD protection. Use the shortest practical cable routing, maintain a defined ground reference, and consider external protection or isolation when long cables connect equipment at different ground potentials. Validate EMC and ESD performance at the complete product level rather than relying on the IC rating alone.
Operate the device only within the specified 3-V-to-5.5-V supply range. Decouple the supply rails according to the manufacturer application circuit and verify startup, shutdown, and power-sequencing behavior in the complete system. Because this is an RS-232 transceiver with internal charge-pump circuitry, do not substitute generic bypass values without checking the specific MAX3243E datasheet and the selected alternative's requirements.
Informações de conformidade
The retrieved product information identifies a commercial-temperature RS-232 interface IC and ±15-kV IEC ESD protection, but it does not provide a complete RoHS, REACH, lead-free, halogen-free, or conflict-minerals declaration for this exact ordering code.