MAX3243ECPWG4 - 3/5 RS-232 Transceiver 28-TSSOP | Texas Instruments
部品番号: MAX3243ECPWG4 ✗ 生産終了MAX3243ECPWG4 概要
An RS-232 transceiver combines the electrical interface functions required by a serial communications port. The driver section translates digital logic levels into RS-232 line signals, while the receiver section converts incoming line signals into logic-compatible outputs. A multichannel device such as the MAX3243ECPWG4 supports three driver channels and five receiver channels, allowing a system to implement several serial links without using separate single-channel transceivers. The family is commonly positioned for point-to-point RS-232 equipment, industrial control interfaces, and legacy peripheral connections.
The MAX3243E family supports supply voltages from 3 V to 5.5 V, making it suitable for systems with 3.3-V or 5-V digital rails. The device includes ±15-kV IEC ESD protection on its external RS-232 connections, helping protect interface circuitry when cables are connected to user-accessible equipment. The MAX3243ECPWG4 is specified in a 28-TSSOP package with a 4.40-mm body width, and the commercial temperature range covers 0°C to 70°C.
Use the manufacturer datasheet and package drawing to confirm the exact pin functions, exposed-pad arrangement, decoupling requirements, and recommended external charge-pump capacitors. The MAX3243E family operates as a multichannel RS-232 interface rather than as a voltage regulator or logic IC, so its power, ground, and signal connections should follow the device-specific application circuit. Request a quote through the XAIPART Request a Quote form for current commercial sourcing information.
This page summarizes the device's RS-232 interface role, key electrical ratings, package information, and practical design considerations. It also distinguishes the obsolete MAX3243ECPWG4 ordering code from available family members and drop-in candidates, helping engineers make a controlled replacement decision rather than relying on package similarity alone.
ドロップイン代替品: MAX3243ECPWG4 — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: MAX3243ECPWG4 (同一形状・フットプリント) — 相違点: Maximum Data Rate, ESD Protection, Interface Standard, Package.
MAX3243ECPW
✅ ドロップイン価格はお問い合わせください
データシートを見る →SP3243EBCY-L
✅ ドロップイン📋 参考代替品(カタログ未掲載)
MAX3243ECPWG4 仕様
| Product Type | Multichannel RS-232 line driver/receiver |
| Number of Drivers | 3 |
| Number of Receivers | 5 |
| Supply Voltage Range | 3 V to 5.5 V |
| Maximum Data Rate | 500 kbps |
| ESD Protection | ±15 kV IEC ESD protection |
| Duplex | Full duplex |
| Receiver Hysteresis | 500 mV |
| 動作温度範囲 | 0°C to 70°C |
| Temperature Grade | Commercial |
| パッケージ | 28-TSSOP |
| Package Body Width | 4.40 mm |
| 実装タイプ | Surface mount |
| Number of Terminals | 28 |
| Terminal Form | Gull wing |
| Package Shape | Rectangular |
| Peak Reflow Temperature | 260°C |
MAX3243ECPWG4 rectangular ピン配置ガイド
MAX3243ECPWG4 (rectangular パッケージ) のピン配置。 ピン番号、機能、接続図はメーカーのデータシートで定義されています。正確なフットプリントとはんだ付けのガイドラインについては、データシートを参照してください。
詳細なピン配置データはありません: MAX3243ECPWG4.
詳細は データシート をご参照ください。
主な用途
MAX3243ECPWG4 の用途: 6 件s: Industrial RS-232 Control Interfaces, Point-to-Point Serial Links, Instrumentation and Test Equipment, Legacy Peripheral Connectivity, Multiport Data Acquisition, Commercial Communication Equipment.
Industrial RS-232 Control Interfaces
The MAX3243ECPWG4 is suitable for legacy industrial controllers that expose multiple RS-232 ports to instruments, service equipment, or configuration tools. Its 3-to-5.5-V supply range allows operation beside 3.3-V or 5-V digital logic, while 3 drivers and 5 receivers provide asymmetric channel support for monitoring and control. The ±15-kV IEC ESD protection strengthens the cable-facing interface, but it does not eliminate the need for chassis grounding or connector-level protection.
おすすめ
Point-to-Point Serial Links
Use the MAX3243ECPWG4 when a system must support several point-to-point RS-232 links without allocating one transceiver package per direction. The three drivers support three outbound channels, while five receivers can monitor five inbound signals, allowing asymmetrical equipment arrangements. Its commercial 0°C-to-70°C temperature grade and 3-V-to-5.5-V supply range are suitable for indoor commercial equipment, with system designers still responsible for cable length, signal integrity, and grounding.
おすすめ
Instrumentation and Test Equipment
The MAX3243ECPWG4 can serve older test and measurement equipment that must communicate with host computers or service interfaces through RS-232. The multichannel arrangement is useful for receiving commands or status from several peripherals while driving selected devices. Because the MAX3243ECPWG4 is obsolete, new instrument designs should verify current family alternatives, confirm the 500-kbps manufacturer product-page rating, and reproduce the recommended charge-pump and bypass-capacitor layout.
おすすめ
Legacy Peripheral Connectivity
The MAX3243ECPWG4 is appropriate for maintaining compatibility with legacy RS-232 peripherals in industrial, medical-equipment, and laboratory systems. Its 5 receivers allow multiple peripheral status lines to be monitored, while 3 drivers handle command or control outputs. The integrated IEC ESD protection is especially relevant where the interface connects to external cables, although medical and laboratory installations still need appropriate isolation, grounding, and safety validation outside the IC itself.
おすすめ
Multiport Data Acquisition
A multiport acquisition system can use the MAX3243ECPWG4 to consolidate several RS-232 links into one host interface. Five receiver channels help collect equipment status or asynchronous reports, while three driver channels support configuration commands to selected instruments. The 3-V-to-5.5-V operating range supports mixed-voltage system architectures, and the 28-TSSOP package keeps the interface compact. Design the external network and protection scheme so that ground potential differences do not create interface stress.
おすすめ
Commercial Communication Equipment
The MAX3243ECPWG4 fits commercial equipment that retains RS-232 for configuration, diagnostics, or service access while other interfaces handle modern data exchange. Three transmit channels and five receive channels offer practical flexibility for asymmetric command and status traffic. Its 0°C-to-70°C commercial range and 3-V-to-5.5-V supply operation suit indoor products. For new production, compare current same-family and cross-brand 28-TSSOP candidates and verify connector-level ESD and surge protection independently.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: MAX3243ECPWG4 — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | MAX3243ECPW | SP3243EBCY-L |
|---|---|---|---|
| Package | 28-TSSOP | 28-TSSOP | 28-TSSOP |
| Brand | Texas Instruments | Texas Instruments | Exar |
主な差別化要因
- Asymmetric multichannel RS-232 interface (vs SP3243EBCY-L)
- Manufacturer-identified ESD protection (vs SP3243EBCY-L)
- Documented package-compatible same-family path (vs MAX3243ECPW)
設計ノート
Do not treat a 28-TSSOP footprint as sufficient proof of replacement compatibility. Confirm the complete numbered pin map, charge-pump capacitor connections, supply decoupling pins, receiver enable or shutdown functions, and the location of every RS-232 line. The MAX3243ECPWG4 and its candidate replacements use the same package outline, but the manufacturer datasheet must still be checked before a PCB or BOM change is released.
Place the IC close to the RS-232 connector and keep the cable-facing traces short. Follow the manufacturer application circuit for the external charge-pump capacitors and place input and output bypass capacitors close to their designated pins. Keep long logic and return paths away from RS-232 conductors where practical, and provide a continuous chassis or signal-ground strategy at the connector.
RS-232 receivers can respond to ground-potential differences and cable-borne transients even when the IC includes ±15-kV IEC ESD protection. Use the shortest practical cable routing, maintain a defined ground reference, and consider external protection or isolation when long cables connect equipment at different ground potentials. Validate EMC and ESD performance at the complete product level rather than relying on the IC rating alone.
Operate the device only within the specified 3-V-to-5.5-V supply range. Decouple the supply rails according to the manufacturer application circuit and verify startup, shutdown, and power-sequencing behavior in the complete system. Because this is an RS-232 transceiver with internal charge-pump circuitry, do not substitute generic bypass values without checking the specific MAX3243E datasheet and the selected alternative's requirements.
コンプライアンス情報
The retrieved product information identifies a commercial-temperature RS-232 interface IC and ±15-kV IEC ESD protection, but it does not provide a complete RoHS, REACH, lead-free, halogen-free, or conflict-minerals declaration for this exact ordering code.