MAX324CPA+ - Precision SPST Analog Switch | Maxim
MPN: MAX324CPA+ ✓ ActiveMAX324CPA+ Overview
An analog switch is an integrated semiconductor device that connects or discloses signal paths under digital control. The MAX324CPA+ belongs to the analog switch family within the broader interface IC category. Its normally closed configuration provides a defined signal path when the control input is inactive, making it useful for precision routing in test systems, communication equipment, audio and video circuits, and battery-powered instruments.
Key features include two SPST channels, operation from a single 2.7 V to 16 V supply, and low power consumption of approximately 5 microwatts. The device is TTL compatible when operated from a single 5 V supply. Maxim identifies the MAX324 as a production part, and the MAX324CPA+ is offered in a commercial temperature grade in an 8-pin through-hole PDIP package.
The switch architecture is designed for low-power single-supply operation rather than high-voltage or high-current switching. Its on-state resistance and leakage characteristics determine the signal attenuation and off-state isolation introduced into the selected path. Users should evaluate those analog parameters against the impedance and noise requirements of the source and destination circuits.
Typical uses include selecting between precision analog signals, routing DAC or ADC channels, controlling communication-system signal paths, and managing audio or video test points. The MAX324CPA+ also suits battery-powered equipment because its low-power operation reduces the energy required when the switch remains in its default state.
When designing a PCB, preserve the 8-pin PDIP footprint and route sensitive analog conductors away from digital control traces. Check the supply voltage, control logic levels, and signal amplitude before connecting external circuitry. The manufacturer datasheet pin-description table should be used when assigning tracks and connector positions.
Drop-in alternatives for MAX324CPA+ — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.
MAX323CPA+
✅ Drop-In ⚠️ Specs Unverified📋 Reference alternative (not in catalog)
MAX322CPA+
✅ Drop-In ⚠️ Specs Unverified📋 Reference alternative (not in catalog)
MAX321CPA+
✅ Drop-In ⚠️ Specs Unverified📋 Reference alternative (not in catalog)
MAX320CPA+
✅ Drop-In ⚠️ Specs Unverified📋 Reference alternative (not in catalog)
MAX324CPA+ Maximum Ratings & Electrical Characteristics
| Product Type | Precision, single-supply, normally closed SPST analog switch |
| Number of Channels | 2 channels |
| Switch Configuration | 2 x SPST, normally closed |
| Signal-to-Noise Ratio | 1:1 |
| On Resistance | 60 ohm |
| Supply Voltage Range | 2.7 V to 16 V |
| Power Consumption | Approximately 5 microwatts |
| Logic Compatibility | TTL compatible at a single 5 V supply |
| Temperature Grade | Commercial |
| Package Type | PDIP-8, through-hole |
| Number of Pins | 8 pins |
| Number of Terminals | 8 terminals |
| Mounting Type | Through-hole, non-surface-mount |
| Package Shape | Rectangular |
| Production Status | Production |
MAX324CPA+ rectangular Pin Configuration Guide
Pin configuration for MAX324CPA+ (rectangular package). Pin numbering, functions, and connection diagrams are defined in the manufacturer datasheet. Refer to it for the exact footprint and soldering guidelines.
No detailed pinout data available for MAX324CPA+.
Refer to the datasheet for full pin configuration.
Typical Applications
MAX324CPA+ is suitable for 6 applications: Battery-Powered Precision Measurement, ADC and DAC Signal Routing, Audio and Video Test Point Selection, Communication-System Signal Control, Precision Test and Measurement Systems, Guidance and Control Auxiliary Routing.
Battery-Powered Precision Measurement
The MAX324CPA+ fits low-power measurement front ends because it operates from 2.7 V to 16 V and consumes approximately 5 microwatts. Its two normally closed SPST channels can select between instrument signals while maintaining a defined default connection. The 1:1 configuration avoids signal duplication, and the listed 60 ohm on-resistance should be included in the source-impedance error calculation. For low-current sensors, confirm leakage and on-resistance behavior at the minimum supply voltage before finalizing the analog error budget.
Recommended
ADC and DAC Signal Routing
The MAX324CPA+ can route signals between converters and external analog circuits by using its two independent SPST channels. Single-supply operation from 2.7 V to 16 V supports mixed-signal systems where converter and analog rails share the same supply domain. The normally closed configuration preserves the default analog path when control signals are inactive, while the 1:1 switch configuration prevents unwanted duplication. Confirm the 60 ohm listed on-resistance against the converter input impedance and the allowable settling error.
Recommended
Audio and Video Test Point Selection
The MAX324CPA+ is suitable for routing audio or video test points where two channels must be selected independently under digital control. Its normally closed SPST arrangement gives each channel a defined default state, while the approximately 5 microwatt power consumption limits the effect on portable test equipment. The 2.7 V to 16 V operating range covers single-supply system rails. Evaluate insertion resistance, off-state isolation, and signal crosstalk against the audio bandwidth and source impedance used in the test fixture.
Recommended
Communication-System Signal Control
The MAX324CPA+ can be used for controlled signal paths in communication equipment where a compact, low-power analog routing element is required. Two SPST channels provide independent selection of transmit, receive, or auxiliary paths without duplicating the signal. The device operates from a single 2.7 V to 16 V supply and is TTL compatible at 5 V, which simplifies control-interface design in conventional 5 V logic systems. Check the control thresholds when operating at a supply other than 5 V.
Recommended
Precision Test and Measurement Systems
The MAX324CPA+ suits instrumentation that selects between reference or stimulus paths while requiring low standby power. Its two normally closed channels, single-supply operation, and commercial-grade PDIP package support straightforward laboratory and industrial test fixture construction. Because the device is a 1:1 analog switch, the selected path experiences series resistance rather than attenuation from a divider. Include the listed 60 ohm on-resistance when determining input impedance requirements and the allowable measurement uncertainty.
Recommended
Guidance and Control Auxiliary Routing
The MAX324CPA+ can route auxiliary control signals in guidance, positioning, or industrial control systems when the design needs two independently switched analog paths. The 8-pin PDIP package simplifies prototyping and through-hole assembly, while the approximately 5 microwatt power consumption limits overhead in low-power control electronics. The single 2.7 V to 16 V supply range supports several embedded rail choices. Verify logic-level thresholds, switching timing, and off-state isolation for the specific control interface.
Recommended
Recommended Products Summary
Engineering reference data for MAX324CPA+ — comparison, design guidance, and compliance information.
Selection Guide
Comparison with Alternatives
| Parameter | This Product | MAX323CPA+ | MAX322CPA+ | MAX321CPA+ | MAX320CPA+ |
|---|---|---|---|---|---|
| Package | PDIP-8 | PDIP-8 | PDIP-8 | PDIP-8 | PDIP-8 |
| Brand | Maxim Integrated | Maxim Integrated | Maxim Integrated | Maxim Integrated | Maxim Integrated |
| Number of Channels | 2 channels | 2 channels | 2 channels | 2 channels | 2 channels |
| Switch Configuration | Normally closed SPST | Normally closed SPST | Normally closed SPST | Normally closed SPST | Normally closed SPST |
| Signal-to-Noise Ratio | 1:1 | 1:1 | 1:1 | 1:1 | 1:1 |
Key Differentiators
- Single-supply operation extends to 2.7 V (vs MAX320CPA+)
- Normally closed default analog connection (vs MAX323CPA+)
- Through-hole 8-pin PDIP footprint (vs MAX324CSA+T)
- Low-power single-supply operation (vs MAX322CPA+)
Design Notes
Do not assume TTL-compatible control levels at every supply voltage. The MAX324CPA+ is identified as TTL compatible when operated from a single 5 V supply; at other supply voltages, the logic thresholds must be checked in the manufacturer data sheet. This distinction is important in 2.7 V and 3.3 V systems, where a conventional 5 V TTL driver may not guarantee a valid low level.
Include the switch's on-resistance in the analog-path error calculation. The exact-device listing specifies 60 ohm, so a high-impedance source may see measurable attenuation or settling effects even though the switch does not intentionally divide the signal. Keep the switched node's total capacitance low, use short analog traces, and validate settling time with the actual source and load impedances.
Preserve the 8-pin PDIP footprint and place the device near the signal paths it controls. Route analog conductors away from digital control traces to reduce capacitive coupling, and keep the analog return path continuous. Because the switch is normally closed, a floating control net can leave the signal path connected; define the control default state and use a defined logic level during power-up and reset.
The approximately 5 microwatt power consumption makes the MAX324CPA+ attractive for battery-powered systems, but the quiescent level is only one part of the energy budget. Check leakage and on-state resistance at the minimum battery voltage, and account for the current drawn by the digital control driver. Confirm that the 2.7 V minimum supply is adequate for the selected control thresholds.
Compliance Information
The device is identified as a commercial-grade production part. No explicit RoHS, REACH, lead-free, halogen-free, conflict-minerals, or automotive-qualification statement was located for this exact MPN.