onsemi

MC14024BF - 7-Bit CMOS Ripple Counter IC | onsemi

MPN: MC14024BF ✓ Active
3 V to 18 V Vdss PDSO14, 14 terminals Package Negative edge Speed
MOQ: 1 |

MC14024BF Overview

The onsemi MC14024BF is a 7-bit, asynchronous binary ripple counter IC with a supply voltage range of 3 V to 18 V, operating temperature range of -55°C to 125°C, and a 14-terminal PDSO14 package. It provides seven buffered counter outputs, negative-edge clock triggering, upward counting, and standard CMOS integration.

A binary ripple counter is a logic IC that advances through a sequence of binary values when an external clock edge is applied. The MC14024BF belongs to the CMOS counter and divider category within the broader hierarchy of digital logic, logic ICs, and integrated circuits. Its seven stages can be used independently as modulo counters, frequency division stages, state-counting elements, or a complete seven-bit counter when the output stages are chained internally.

The key operating features include seven counter stages, buffered outputs, negative-edge triggering, asynchronous counting, and hysteresis on the clock input for improved noise immunity. The reset input uses standard noise immunity. These characteristics make the device useful when a design requires a simple counter without a dedicated microprocessor or programmable logic. The 3 V to 18 V supply range permits operation across common low-voltage and conventional CMOS supply systems.

The ripple architecture advances one stage per clock event, with propagation delay accumulating through the cascaded stages. Each output is buffered, allowing individual stage outputs to be observed or used in external logic. Because the maximum operating frequency and timing limits depend on operating voltage and temperature, the onsemi MC14024B datasheet should be consulted for the applicable values before relying on the counter at a system clock edge that approaches the device limit.

Typical applications include digital event counting, pulse accumulation, seven-segment sequencing control, industrial timing, frequency division, laboratory instrumentation, and embedded control logic. The MC14024BF can count external events when the input signal remains within the electrical limits of its clock input. Its buffered outputs are particularly useful when one or more counter states must drive gates, indicators, or control signals independently.

For reliable implementation, connect the reset to a defined inactive state, maintain clean clock edges, and observe the supply-voltage and temperature limits of 3 V to 18 V and -55°C to 125°C. Because ripple-counter outputs can change successively after a clock edge, downstream circuitry should not treat the seven outputs as a simultaneous encoded bus unless the timing requirements are specifically analyzed.

This page combines the onsemi counter architecture with application guidance, verified parameter availability, comparison fields, and practical implementation notes. It helps engineers distinguish the MC14024BF from other counter functions and identify what must be checked in the manufacturer datasheet before releasing a PCB or production design.

Drop-in alternatives for MC14024BF — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.

No drop-in alternatives available for this product.

Request Alternatives

MC14024BF Maximum Ratings & Electrical Characteristics

Counter Type 7-bit asynchronous binary ripple counter
Number of Counter Stages 7 stages
Output Count 7 outputs
Supply Voltage Range 3 V to 18 V
Operating Temperature Range -55°C to +125°C
Clock Edge Sensitivity Negative edge
Counting Direction Up
Logic Family CMOS
Output Buffering Each counter stage is buffered
Clock Input Noise Immunity Enhanced by hysteresis
Reset Input Noise Immunity Standard
Package Type PDSO14, 14 terminals
Terminal Count 14 terminals
Mounting Type Surface mount

MC14024BF pdso14, 14 terminals Pin Configuration Guide

Pin configuration for MC14024BF (pdso14, 14 terminals package). This digital IC includes GPIO, communication interfaces (UART, SPI, I2C), and power pins. Refer to the manufacturer datasheet for alternate pin functions and configuration options. Essential for embedded system design and PCB layout.

pdso14, 14 terminals package pinout diagram for MC14024BF

No detailed pinout data available for MC14024BF.

Refer to the datasheet for full pin configuration.

Typical Applications

MC14024BF is suitable for 6 applications: Digital Event and Pulse Counting, Frequency Division and Clock Scaling, Industrial Timing and Sequence Control, Seven-Segment Display Sequencing, Test and Measurement Instrumentation, Embedded Control Logic.

🔧

Digital Event and Pulse Counting

The MC14024BF fits digital event-counting systems that need a fixed seven-bit tally. Its negative-edge clock input counts one event for each valid falling edge, while the seven buffered outputs expose successive binary states for decoding or control. The onsemi MC14024B datasheet identifies clock hysteresis, which helps reject modest input noise. Design the input driver so the event signal crosses the switching threshold cleanly and does not exceed the specified electrical limits. Because this is a ripple counter, the seven output bits change successively rather than simultaneously, so downstream logic should not sample them as a synchronous binary bus without a timing review.

⚡

Frequency Division and Clock Scaling

The MC14024BF can divide an incoming clock through its seven cascaded stages, with each buffered stage providing a divide-by-two output. This is useful when a fixed frequency relationship is needed for slower timers, control clocks, or periodic sampling without a programmable timing device. The onsemi MC14024B datasheet confirms that every counter stage is buffered, allowing an individual stage to drive external logic. Select the stage that produces the required frequency, then verify its transition timing at the actual 3 V to 18 V supply and worst-case temperature. Ensure downstream logic does not require all counter outputs to change on the same edge.

🏭

Industrial Timing and Sequence Control

The MC14024BF supports fixed-duration timing, event sequencing, and repetitive machine-control functions where seven cascaded states are sufficient. Each output can trigger a gate, indicator, or state-dependent control function, while the clock input establishes the system cadence. The onsemi MC14024B datasheet describes standard reset noise immunity and enhanced clock-input noise immunity, supporting practical use in digital control equipment. Keep the reset path short and free of switching-node coupling, and validate the maximum clock rate under voltage and temperature conditions. The fixed seven-bit ripple topology is especially suitable when reprogrammability and parallel loading are not required.

📺

Seven-Segment Display Sequencing

The MC14024BF can generate repetitive step sequences for a seven-segment display or similar multiplexed indicator when the counter outputs drive decoding logic. Its seven buffered stages provide a compact binary sequence without requiring a microcontroller, and the upward count supports cyclic scan-state advancement. The onsemi MC14024B datasheet confirms the seven-stage, buffered-output architecture and negative-edge counting behavior. Choose display drive components and interface levels that are compatible with the counter outputs, and account for ripple propagation delay when switching active elements. The counter is best suited to fixed repetitive patterns rather than arbitrary alphanumeric sequences requiring programmable storage.

🔧

Test and Measurement Instrumentation

The MC14024BF is appropriate for laboratory and test-equipment logic that counts test events, divides an instrument clock, or develops repeatable control steps. The buffered stage outputs can drive threshold indicators, range logic, or trigger sequencing without overloading the internal counter nodes. The onsemi MC14024B datasheet specifies operation over -55°C to +125°C, allowing use across wide environmental test profiles. For laboratory timing accuracy, evaluate clock-edge quality, propagation delay, and supply tolerance over the required frequency range. A microcontroller-based counter is preferable when measurements must be configured dynamically or results must be captured computationally.

🧩

Embedded Control Logic

The MC14024BF can provide a small autonomous counter beside a microcontroller in appliance controls, panel interfaces, or embedded automation. It continues a simple tally when external logic needs asynchronous events counted without occupying processor pins or interrupt capacity. The onsemi MC14024B datasheet confirms upward counting, negative-edge clock triggering, and buffered outputs. Connect the counter clock to a conditioned version of the event source, and use a reset generated by the surrounding control logic when a deterministic starting state is required. Avoid treating the ripple outputs as a coherent bus when the controller can sample during the transition interval.

What is the onsemi MC14024BF?
The onsemi MC14024BF is a 7-bit asynchronous binary ripple counter with seven buffered outputs, negative-edge clock triggering, and upward counting. According to the onsemi MC14024B datasheet, the device operates from a 3 V to 18 V supply and is packaged in a 14-terminal PDSO14 configuration. Each internal counter stage can drive external logic, allowing the device to serve as a complete seven-bit counter or as a collection of cascaded count stages.
What is the supply voltage range of MC14024BF?
The MC14024BF operates from 3 V to 18 V. This range is stated in the onsemi MC14024B datasheet and supports operation with both low-voltage CMOS systems and higher-voltage conventional CMOS rails. Designers should use the datasheet timing curves for the selected supply voltage because propagation delay and maximum clock frequency can change as operating voltage varies.
What is the maximum operating temperature of MC14024BF?
The MC14024BF is specified for operation from -55°C to +125°C. The onsemi MC14024B datasheet defines this temperature range for the counter family. When the device is installed near a switching regulator, power converter, relay driver, or high-current output stage, verify that the worst-case ambient temperature and board self-heating remain inside the specified operating range.
How many counter stages and outputs does MC14024BF provide?
The MC14024BF provides seven counter stages and seven buffered outputs. The onsemi MC14024B datasheet identifies the part as a 7-stage ripple counter whose outputs are individually buffered. Individual outputs can be used to divide the incoming clock or observe selected binary bits, while the complete seven-stage chain provides a modulo-128 counting sequence.
What clock edge triggers the MC14024BF counter?
The MC14024BF increments on the falling, or negative, edge of its clock input. The onsemi MC14024B datasheet identifies the clock as negative-edge triggered and notes increased noise immunity caused by clock-input hysteresis. The reset input retains standard noise immunity, so the reset path should still be kept free of excessive bounce and noisy transitions.
Where can I download the MC14024BF datasheet PDF?
The MC14024BF datasheet PDF is available from the onsemi product-document link at https://www.onsemi.com/pdf/datasheet/mc14024b-d.pdf. It is the appropriate document for confirming the pin-description table, supply-current behavior, absolute maximum ratings, DC characteristics, AC timing limits, and recommended operating conditions before finalizing a design.
Where can I find the MC14024BF pinout?
The MC14024BF pinout is shown in the pin-description table of the onsemi MC14024B datasheet. The device uses a 14-terminal PDSO14 package, with the clock, reset, supply connections, and seven counter outputs assigned to specific terminals. Use that table to assign PCB nets because package drawings alone do not identify the functional pin arrangement.
What can replace the MC14024BF?
The MC14024BF can be replaced only after confirming that the candidate has the same 14-terminal footprint, seven-stage count function, negative-edge clock behavior, buffered outputs, compatible supply range, and acceptable timing. The onsemi MC14024BFELG listing describes a 14-lead SOIC counter, but it is not treated as a drop-in substitute for the PDSO14 MC14024BF because the package forms differ. Use the Request a Quote form on this page when sourcing an exact replacement.
Is MC14024BF suitable for digital event counting?
The MC14024BF is suitable for digital event counting when the input pulses meet its clock-edge and timing requirements. The onsemi MC14024B datasheet specifies negative-edge operation, clock hysteresis, and buffered outputs. Use an external conditioning stage when the source signal has slow edges, excessive bounce, or levels outside the device input range, and remember that successive ripple outputs do not change simultaneously.
What is the difference between MC14024BF and MC14024BFELG?
The MC14024BF is identified as a 14-terminal PDSO14 part, while MC14024BFELG is listed as a 14-lead SOEIAJ-14 part. Both are associated with the onsemi seven-bit counter family, but the package drawing and footprint are not interchangeable without checking the manufacturer drawings. A functional match alone is insufficient for a drop-in replacement because PCB land patterns, lead geometry, and assembly requirements must also align.
When should I choose MC14024BF instead of a programmable counter?
Choose the MC14024BF when a fixed seven-stage asynchronous counter is sufficient and the design does not require programmable modulus, synchronous parallel load, or multiple independent count channels. The onsemi MC14024B datasheet describes a straightforward ripple counter with buffered outputs and negative-edge operation. A programmable counter is preferable when count ranges, control sequences, or firmware-driven behavior must be changed without redesigning the hardware.
Is MC14024BF the same as MC14024B?
The MC14024BF is the specified onsemi orderable variant within the MC14024B counter family, and the family datasheet is titled MC14024B. The ordering suffix can distinguish package, temperature, or other production attributes, so the manufacturer ordering information and package drawing remain the controlling references. Confirm the exact MC14024BF package and temperature requirements before treating another MC14024B suffix as interchangeable.
Where can I buy MC14024BF online?
Use the Request a Quote form on this page to request MC14024BF availability, current commercial terms, and suitable shipment quantities. The onsemi MC14024B datasheet is linked above for technical review. A purchase decision should also account for the required 14-terminal PDSO14 footprint, operating-temperature grade, and any lifecycle or sourcing changes affecting the exact ordering code.
What is the price of MC14024BF?
Current commercial pricing for MC14024BF should be requested through the Request a Quote form on this page because availability, quantity, and sourcing terms can change. The onsemi MC14024B datasheet linked on this page contains technical information rather than a current quotation. Engineers should also confirm the exact PDSO14 package and operating-temperature requirements when requesting supply.
What is the lead time for MC14024BF?
The current lead time for MC14024BF should be confirmed through the Request a Quote form on this page. Lead time can vary with order quantity, package configuration, inventory status, and production scheduling, so it should not be inferred from a generic catalog page. Include the required quantity and target delivery date in the request to obtain an actionable supply commitment.
Is MC14024BF in stock?
Current MC14024BF stock status should be requested through the Request a Quote form on this page. The onsemi MC14024B datasheet provides technical specifications but does not constitute a live inventory commitment. For production planning, specify the required order quantity, date code requirements, acceptable delivery window, and whether multiple shipment locations are allowed when requesting a quotation.
What are the key specifications of MC14024BF that engineers should know?
The MC14024BF is a 7-stage, 7-bit asynchronous CMOS ripple counter with a 3 V to 18 V supply range and a -55°C to +125°C operating-temperature range. The onsemi MC14024B datasheet identifies negative-edge triggering, upward counting, buffered stage outputs, standard reset-input noise immunity, and enhanced clock-input noise immunity from hysteresis. Its 14-terminal PDSO14 package must match the PCB footprint.

Engineering reference data for MC14024BF — comparison, design guidance, and compliance information.

Selection Guide

Choose the MC14024BF when the design needs a simple seven-bit asynchronous counter with fixed binary sequencing, negative-edge triggering, and individually buffered outputs. It is especially suitable for pulse counting, fixed frequency division, timing sequences, and embedded logic that does not require programmable count limits or parallel loading. The onsemi MC14024B datasheet confirms a 3 V to 18 V supply range and -55°C to +125°C operation. Do not choose a candidate solely because it is also called a 7-bit counter: the package, clock polarity, output behavior, timing, and electrical limits must all match. In particular, MC14024BFELG is listed in a different 14-lead package form and is not a footprint-compatible replacement for the PDSO14 MC14024BF. For designs needing synchronous output changes, configurable modulus, multiple count channels, or stored sequences, a programmable counter or microcontroller is the more appropriate architecture.

Comparison with Alternatives

Parameter This Product
Counter Function 7-stage asynchronous binary ripple counter
Counter Width 7 bits
Supply Voltage Range 3 V to 18 V
Operating Temperature -55°C to +125°C
Clock Edge Negative edge
Counting Direction Up
Output Type Seven buffered counter outputs
Package PDSO14, 14 terminals
Brand onsemi

Key Differentiators

  • Seven cascaded stages with buffered outputs (vs MC14024BFELG)
  • Negative-edge counting with clock hysteresis (vs MC14024BFELG)
  • Wide specified operating-temperature range (vs MC14024BFELG)

Design Notes

Treat the clock as a single net and drive it from clean logic rather than from a long cable or noisy mechanical switch. The onsemi MC14024B datasheet identifies hysteresis as the reason for increased clock-input noise immunity, but hysteresis does not permit arbitrary bounce or slow transitions. For switch inputs, add conditioning and a Schmitt-trigger stage if the source can ring or cross the input threshold repeatedly. Route the clock away from switching nodes and keep the reset path short.

Do not interpret the seven ripple-counter outputs as a simultaneously updated binary bus. A clock edge initiates a sequence of stage transitions, so a receiver can observe intermediate count values during propagation. Use individual outputs for independent state indications, or add a latch and sampling strategy when a coherent encoded value is required. Also define the reset level during power-up so the counter begins from a known state rather than an uncontrolled sequence.

Follow the onsemi MC14024B datasheet and PDSO14 land-pattern drawing when assigning and routing the 14-terminal footprint. Provide a low-impedance supply and ground connection, place decoupling capacitance close to the supply terminals, and keep the clock trace short. Avoid routing the clock between noisy power-stage nodes. Confirm lead pitch, body dimensions, and solder-reflow classification before releasing the PCB because package family labels alone do not define a land pattern.

Compliance Information

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Lead Free
Unknown
Halogen Free
Unknown
Conflict Minerals
Unknown

The onsemi MC14024B datasheet is the controlling technical document, but no explicit compliance declarations for the exact MC14024BF ordering code are stated in the cited pages.

Data verified on: 2026-11-16 — data verified and curated by XAIPART's component engineering team

Related Searches

MC14024BF datasheet MC14024BF pinout MC14024BF datasheet pdf MC14024BF equivalent MC14024BF replacement MC14024BF drop-in substitute MC14024BF vs MC14024BFELG onsemi MC14024BF MC14024BF 7-bit CMOS counter MC14024BF 3V 18V MC14024BF PDSO14 footprint MC14024BF price MC14024BF stock MC14024BF application circuit

Related Components & Terms

onsemi MC14024BF MC14024B MC14024BFELG binary ripple counter asynchronous counter CMOS counter logic IC digital logic integrated circuit seven-stage counter seven-bit counter negative-edge clock clock hysteresis buffered counter output PDSO14 package surface-mount package 3 V to 18 V supply event counting frequency division
Quick Quote RFQ
Fill in complete details — our sales team will respond within 24 hours
Part Number Manufacturer Package QTY Target Price Extended
✓
Quote submitted!

We will respond to your email within 24 hours

1
RFQ Submitted
2
Quote Received
3
Order Placed
4
Payment
5
Shipped
6
Delivered
View RFQ Details