MC145481DT - 6-Bit PCM Codec Filter | NXP | 20-TSSOP
MPN: MC145481DT ✗ End of LifeMC145481DT Overview
A PCM codec-filter is an interface IC that converts analog voice or audio signals into a digital PCM stream and converts digital PCM data back into an analog signal. In the broader hierarchy, this device belongs to the codec and audio-interface class of integrated circuits and ultimately to the interface-IC and semiconductor categories. Its per-channel architecture allows each channel to use the same conversion and filtering framework, making it suitable for compact audio or communications equipment requiring separate encode and decode paths.
The principal specifications are its 6-bit ADC resolution, 6-bit DAC resolution, one ADC, one DAC, one PCM channel, and 20-pin TSSOP construction. Pin-selectable Mu-Law and A-Law companding gives the device flexibility for systems using either companding convention. The SOG and SSOP family construction described for the device also highlights its use in space-constrained communications designs, while the MC145481DT orderable form uses the smaller 20-pin TSSOP outline.
Architecturally, the codec combines an analog input path, analog output path, digital PCM interface, filtering, and companding logic. That integration reduces the number of discrete blocks needed for a basic PCM voice path. The 6-bit format prioritizes compact digital word length and conventional telephony compatibility rather than the resolution expected from modern high-fidelity audio converters. System integrators should therefore evaluate the required signal-to-noise ratio and distortion performance against their communication standard before finalizing the design.
Typical uses include PCM telephony interfaces, digital telephone speech paths, compact communications modules, audio capture and playback blocks, and embedded voice-processing systems. In a speech interface, the ADC path accepts an analog voice signal and produces a companded PCM representation, while the DAC path reconstructs an analog output from digital PCM data. A system clock, suitable analog filtering, power rails, and correct companding configuration remain necessary around the device.
The primary design consideration is PCB implementation. Place the analog and digital return paths carefully, connect decoupling capacitors close to the appropriate supply pins, and use the package pin-description table in the manufacturer datasheet when assigning tracks and test points. Keep sensitive analog input and output routing away from high-speed digital clock lines to reduce crosstalk and preserve signal quality.
This product page consolidates the identified device specifications, package information, sourcing structure, and engineering considerations into one practical reference. It also distinguishes verified functional facts from parameters requiring engineering confirmation, helping designers decide whether this legacy 6-bit PCM codec-filter matches the required channel count, interface format, environmental grade, and board footprint.
Drop-in alternatives for MC145481DT — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.
No drop-in alternatives available for this product.
Request AlternativesMC145481DT Maximum Ratings & Electrical Characteristics
| Product Type | PCM codec-filter |
| Device Description | General-purpose per-channel PCM codec-filter |
| Number of ADCs | 1 |
| Number of DACs | 1 |
| ADC Resolution | 6 bits |
| DAC Resolution | 6 bits |
| Channel Architecture | 1 per-channel PCM codec-filter |
| Supported Companding | Pin-selectable Mu-Law or A-Law |
| Supply Voltage | 3 V |
| Package | 20-pin TSSOP |
| Terminal Count | 20 |
| Terminal Form | Gull wing |
| Package Shape | Rectangular |
| Temperature Grade | Industrial |
| Interface Type | PCM filter interface |
| Analog-to-Digital Conversion | 1 ADC |
| Digital-to-Analog Conversion | 1 DAC |
| Mounting Type | Surface mount |
MC145481DT rectangular Pin Configuration Guide
Pin configuration for MC145481DT (rectangular package). Pin numbering, functions, and connection diagrams are defined in the manufacturer datasheet. Refer to it for the exact footprint and soldering guidelines.
No detailed pinout data available for MC145481DT.
Refer to the datasheet for full pin configuration.
Typical Applications
MC145481DT is suitable for 6 applications: PCM Telephony Voice Interface, Digital Voice Processing Module, Compact Audio Capture and Playback, Industrial Communication Terminal, Embedded Voice Control Interface, Legacy Network Voice Adapter.
PCM Telephony Voice Interface
The MC145481DT fits a legacy PCM telephony voice path because it combines one ADC and one DAC with 6-bit conversion resolution and pin-selectable Mu-Law or A-Law companding. The codec can convert an analog speech input into a companded PCM stream and reconstruct an analog output from incoming PCM data. Its 20-pin TSSOP package limits board area while supporting a conventional integrated voice interface. The 6-bit format should be used where the required speech quality and distortion limits are consistent with traditional PCM telephony rather than modern wideband audio.
Recommended
Digital Voice Processing Module
The MC145481DT can serve as the analog boundary of a compact digital voice-processing module. Its one ADC channel accepts an analog signal for conversion, while the one DAC channel supports reconstruction of an analog voice output after digital processing. Pin-selectable Mu-Law or A-Law operation allows the interface to match the companding format expected by the associated digital system. The 20-pin TSSOP outline helps reduce board area, but the design must include suitable clocking, analog filtering, and power decoupling around the codec.
Recommended
Compact Audio Capture and Playback
The MC145481DT supports compact audio capture and playback blocks where a basic per-channel PCM interface is sufficient. One ADC path can digitize a analog input, and the corresponding DAC path can generate an analog output from PCM data. Its 6-bit resolution is the defining limitation: the design should target speech, control, or legacy communication signals rather than music or high-fidelity content. The small 20-pin TSSOP package is useful in space-constrained equipment, although analog grounding and digital clock isolation remain essential.
Recommended
Industrial Communication Terminal
The MC145481DT is appropriate for industrial communication equipment requiring a compact, industrial-temperature-grade PCM codec-filter. Its one ADC, one DAC, and selectable companding provide the basic functions needed for a per-channel voice or audio interface, while the 20-pin TSSOP package supports surface-mount PCB assembly. For a new design, verify lifecycle availability, supply tolerances, timing limits, and environmental requirements against the manufacturer datasheet before committing production quantities.
Recommended
Embedded Voice Control Interface
The MC145481DT can be used at the signal boundary of an embedded voice-control or communications subsystem that uses PCM rather than a modern serial audio interface. The ADC path digitizes the incoming voice signal, and the DAC path provides an analog playback or monitoring function. Mu-Law and A-Law selection provides compatibility with common companded PCM systems. Because the converter resolution is only 6 bits, the subsystem should define its intelligibility, noise, and distortion requirements before adopting this legacy codec architecture.
Recommended
Legacy Network Voice Adapter
The MC145481DT can support a legacy network voice adapter that terminates a companded PCM stream and requires a local analog microphone or speaker path. One ADC handles the receive-side analog signal, one DAC handles transmit-side playback, and the configurable companding mode accommodates either Mu-Law or A-Law systems. The TSSOP-20 package supports compact adapters, while careful separation of analog and digital return paths helps limit codec noise and crosstalk in voice-focused equipment.
Recommended
Engineering reference data for MC145481DT — comparison, design guidance, and compliance information.
Selection Guide
Comparison with Alternatives
| Parameter | This Product |
|---|---|
| Product Type | PCM codec-filter |
| Brand | NXP Semiconductors |
| Package | 20-pin TSSOP |
| Number of ADCs | 1 |
| Number of DACs | 1 |
| Conversion Resolution | 6 bits |
| Supply Voltage | 3 V |
| Companding | Pin-selectable Mu-Law or A-Law |
| Temperature Grade | Industrial |
| Terminal Count | 20 |
Key Differentiators
- Integrated single-channel codec-filter function (vs MC145481SD)
- Configurable companding (vs MC145481DTR2)
- Compact surface-mount implementation (vs MC145481SD)
Design Notes
Use the official 20-pin TSSOP land pattern and pin-description table from the NXP datasheet. Place the supply bypass components at the pins identified by the manufacturer, keep the analog input and output routing short, and route PCM clock and data away from sensitive analog nets. Component orientation and the pin-1 position must follow the package drawing rather than a generic TSSOP symbol.
Keep the analog and digital return-current paths disciplined. Return each signal reference through the appropriate ground connection shown in the manufacturer application circuit, and avoid creating shared high-current return paths beneath the analog converter section. The MC145481DT contains both analog conversion paths and digital PCM logic, so loop area and coupling between these domains directly affect the usable signal quality.
Do not treat every MC145481 family ordering code as a drop-in substitute for MC145481DT. The family is also identified with SOG package options and shipment or reel variants, and the DT ordering code specifically corresponds to 20-pin TSSOP. Before substitution, compare the physical footprint, numbered pin functions, analog characteristics, timing, operating limits, and lifecycle status for the exact candidate MPN.
Follow the NXP datasheet for the permitted supply range, decoupling configuration, and analog or digital rail relationships. The verified listing identifies a 3 V supply for MC145481DT, but it does not replace the complete recommended operating conditions. Decoupling capacitors should be located close to the relevant supply pins, and the power source should be designed with low switching noise to avoid degrading the codec's analog path.
Compliance Information
The available product and cross-reference listings do not state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. The device is identified as industrial temperature grade but is not thereby treated as AEC-Q100 qualified.