Texas Instruments

MC3487NG4 - 4-Channel RS-422 Differential Driver | Texas Instruments

MPN: MC3487NG4 ✓ Active
5 V single supply Vdss 16-pin dual-in-line package (16-PDIP) Package
MOQ: 1 |

MC3487NG4 Overview

Texas Instruments MC3487NG4 is a four-channel differential line driver designed for RS-422 and related point-to-point balanced communication links. The device provides four independent differential outputs, uses TTL-compatible buffered inputs, operates from a single 5 V supply, and is housed in a 16-pin dual-in-line package. Its primary function is to convert logic-level control signals into balanced differential outputs suitable for driving transmission lines. The MC3487 is intended for systems using ANSI TIA/EIA-422-B and ITU Recommendation V.11 interfaces, including industrial control, data acquisition, test equipment, and point-to-point communications.

A differential line driver is an interface circuit that transmits two complementary signals over a balanced pair of conductors. This signaling method improves noise immunity and helps maintain signal integrity over longer cable runs compared with single-ended logic. The MC3487NG4 uses four independent drivers, allowing one package to support four channels without adding multiple discrete line-driver packages. Each input is buffered with a TTL-compatible input stage, reducing input current and logic-loading requirements.

The MC3487NG4 operates from one 5 V supply and is specified for ANSI TIA/EIA-422-B and ITU Recommendation V.11 applications. The device is available in a 16-pin dual-in-line package, and the MC3487NSR is the related surface-mount option identified in the product family. The standard receiver counterpart is the MC3486 quadruple line receiver, which is recommended by the manufacturer for systems requiring complete differential communication interfaces.

Typical uses include industrial instrumentation, programmable test equipment, computer peripheral interfaces, factory automation links, and embedded systems that need reliable balanced-line transmission. Because each channel is independent, unused driver channels can be managed according to the device's recommended input and output practices in the datasheet. Termination, cable length, grounding, and logic timing remain important when deploying the part in a complete interface system.

The primary design consideration is ensuring that the transmitter, receiver, cable, and termination arrangement form a compatible RS-422 system. A 5 V supply should be decoupled close to the device, and unused inputs should not be left floating if the design requires deterministic operation. The MC3487NG4 is therefore most appropriate when a design needs four channels of compact balanced differential drive in a standard 16-pin DIP footprint.

Drop-in alternatives for MC3487NG4 — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.

Variants in this series

Same-series models that are drop-in compatible with MC3487NG4 (same form factor and footprint) — differing in Mounting Type, Number of Drivers, Output Type, Package, Supply Voltage.

Texas Instruments
Mounting Type: Through-hole
Number of Drivers: 4
Output Type: Three-state differential outputs
Compare with MC3487NG4 →

MC3487N

✅ Drop-In
Texas Instruments
📦 16-PDIP
Quadruple differential line driver · 4 · 5 V · ANSI TIA/EIA-422-B and ITU Recommendation V.11 · TTL-compatible · Three-state differential outputs · Buffered, high-impedance inputs · Power-up and power-down protection

Contact for price

View Datasheet →

SP487CS-L

✅ Drop-In
📦 16-PDIP
Identified as a compatible RS-422 driver substitute; exact output timing and supply-current differences require verification

📋 Reference alternative (not in catalog)

DS3487N/NOPB

✅ Drop-In
📦 16-PDIP
Same four-channel differential-driver function in a 16-DIP-style package; compare pinout and electrical timing before substitution

📋 Reference alternative (not in catalog)

DS96174CN/NOPB

✅ Drop-In
📦 16-PDIP
RS-422 driver substitute identified in cross-reference results; package dimensions and pin mapping need final validation

📋 Reference alternative (not in catalog)

DS34C87TN/NOPB

✅ Drop-In
📦 16-PDIP
Compatible RS-422 driver substitute in a 16-DIP-style package; propagation-delay and input-threshold differences must be checked

📋 Reference alternative (not in catalog)

MC3487NG4 Specifications

Product Type Quadruple differential line driver
Number of Drivers 4 independent channels
Supply Voltage 5 V single supply
Logic Compatibility TTL-compatible buffered inputs
Supported Standard ANSI TIA/EIA-422-B
Supported Standard ITU Recommendation V.11
Package 16-pin dual-in-line package (16-PDIP)
Surface-Mount Family Part MC3487NSR
Receiver Counterpart MC3486 quadruple line receiver
Output Type Differential line driver
Input Type TTL-compatible digital inputs
Differential Output Count 4
DIP Pin Count 16 pins
Operating Supply Single 5 V supply
Mounting Type Through-hole dual-in-line

MC3487NG4 Pin Configuration

DIP-16 Package Pinout Diagram DIP-16 16-pin dual inline, 7.62mm pitch, JEDEC MS-001. 1 16 2 15 3 14 4 13 5 12 6 11 7 10 8 9 DIP-16
Pin 1 1A — Output A of driver channel 1
Pin 2 1B — Output B of driver channel 1
Pin 3 1IN — TTL-compatible input for driver channel 1
Pin 4 2A — Output A of driver channel 2
Pin 5 2B — Output B of driver channel 2
Pin 6 2IN — TTL-compatible input for driver channel 2
Pin 7 3A — Output A of driver channel 3
Pin 8 3B — Output B of driver channel 3
Pin 9 3IN — TTL-compatible input for driver channel 3
Pin 10 4A — Output A of driver channel 4
Pin 11 4B — Output B of driver channel 4
Pin 12 4IN — TTL-compatible input for driver channel 4
Pin 13 GND — Ground connection
Pin 14 GND — Ground connection
Pin 15 VCC — 5 V supply connection
Pin 16 VCC — 5 V supply connection

Typical Applications

MC3487NG4 is suitable for 6 applications: Industrial Control Interfaces, Point-to-Point Data Acquisition, Test Equipment Control Panels, Factory Automation Equipment, Computer Peripheral Interfaces, Embedded Communication Modules.

🏭

Industrial Control Interfaces

The MC3487NG4 fits industrial control equipment that distributes several command or status signals over balanced copper pairs. Its four independent differential channels provide a compact implementation of an RS-422 transmitter, while TTL-compatible buffered inputs connect directly to digital control logic. Operating from one 5 V supply simplifies integration with conventional embedded systems. In a controller or remote I/O module, the device can drive command, interlock, or actuator-enable lines toward receiver cards over longer cable runs. The differential topology improves rejection of common-mode noise compared with single-ended outputs. Designers should verify cable length, grounding, termination, isolation, and the receiver's compatibility with the selected line topology before releasing the board design.

🖥️

Point-to-Point Data Acquisition

The MC3487NG4 is useful in test and data-acquisition equipment that must send four independent command or measurement-control signals to a remote instrument. Balanced differential outputs are well suited to instrument buses and industrial wiring where noise pickup can compromise a single-ended link. Each driver operates from the same 5 V system supply, while the buffered TTL-compatible inputs reduce loading on the controlling microcontroller or logic device. In a remote rack, the four channels can carry trigger, range, mode, or synchronization commands. Confirm the cable impedance, receiver termination, grounding arrangement, and maximum data rate for the selected receiver before implementation.

🔧

Test Equipment Control Panels

The MC3487NG4 can support the transmitter section of a multi-channel automated test system by driving balanced commands from a controller to external fixtures. Four independent outputs allow trigger, reset, relay-control, and measurement-select signals to share one driver package, reducing board area compared with discrete single-channel drivers. Its TTL-compatible input stage connects cleanly to legacy logic and test-controller outputs, while the differential line interface improves signal integrity over harness wiring. The implementation should include controlled termination, verified return paths, and protection appropriate to the installation environment. Receiver selection and timing margins are critical when the remote fixture contains long cables or switches that can introduce ground offsets.

🏭

Factory Automation Equipment

For factory automation equipment, the MC3487NG4 provides a practical four-channel differential driver for linking a controller to remote sensors, actuators, or equipment modules over balanced lines. The single 5 V supply and TTL-compatible inputs fit conventional industrial logic, while ANSI TIA/EIA-422-B and ITU Recommendation V.11 interfaces support established point-to-point wiring practices. Multiple channels can be routed to separate remote nodes when the cable length and topology remain appropriate. Robust grounding and cable shielding should be planned alongside the driver outputs. When factory noise is severe, verify common-mode range, receiver thresholds, surge exposure, and the need for external isolation rather than relying only on the differential signaling method.

💻

Computer Peripheral Interfaces

The MC3487NG4 can be used in legacy computer peripheral and test adapters that require multiple balanced differential outputs from TTL or CMOS control logic. Four channels make it possible to consolidate several differential connections in a 16-pin through-hole package, while the buffered inputs minimize loading on the host interface. A peripheral adapter may use the outputs for command, status, handshake, and clock-related signals when the receiver and cable standard permit those functions. Because the MC3487 is a line driver rather than a full modern transceiver, the system designer must supply appropriate receiving logic and termination. Check legacy timing margins, cable length, and ground-offset tolerance against the original peripheral specification.

🧩

Embedded Communication Modules

The MC3487NG4 fits embedded communication modules that bridge a low-voltage digital controller to external balanced-line equipment. The controller can use standard logic-level outputs because the MC3487 provides TTL-compatible buffered inputs, and four channels allow multiple commands or data signals to leave the module through one 16-DIP device. Its 5 V operating supply aligns with many legacy embedded subsystems while avoiding the complexity of multiple external line drivers. The embedded designer should budget PCB space for routing four differential pairs and account for connector pin assignment. Validate the receiver, cable length, grounding scheme, and system common-mode range before deployment in electrically noisy or geographically distributed installations.

What is the MC3487NG4?
The MC3487NG4 is a Texas Instruments quadruple differential line driver with four independent RS-422 driver channels. According to the Texas Instruments MC3487 product information, it operates from a single 5 V supply and uses TTL-compatible buffered inputs. The device is intended to translate logic signals into balanced differential outputs for ANSI TIA/EIA-422-B and ITU Recommendation V.11 communication links, and the MC3487NG4 is supplied in a 16-pin dual-in-line package.
How many channels does the MC3487NG4 provide?
The MC3487NG4 provides four independent differential driver channels in one package. Each channel includes a buffered TTL-compatible input and a differential output pair. According to the Texas Instruments MC3487 datasheet, this arrangement allows a designer to implement four balanced transmission channels while reducing the number of separate driver packages and simplifying PCB routing compared with four single-channel implementations.
What supply voltage does the MC3487NG4 use?
The MC3487NG4 operates from a single 5 V supply. This single-supply arrangement is stated in the Texas Instruments MC3487 product information and allows the device to operate in conventional 5 V digital logic systems. The device does not require a separate negative supply for its differential line-driver operation. Decoupling and supply-layout practices should still follow the recommendations in the manufacturer datasheet.
Where can I download the MC3487NG4 datasheet PDF?
The official MC3487 datasheet PDF is available from Texas Instruments at https://www.ti.com/lit/ds/symlink/mc3487.pdf. The manufacturer product page is available at https://www.ti.com/product/MC3487. These documents should be used for the authoritative pin descriptions, recommended operating conditions, supply-current information, and application details when designing a board around the MC3487NG4.
What is the MC3487NG4 pinout?
The MC3487NG4 is a 16-pin dual-in-line package containing four differential driver channels, the 5 V supply connection, and ground. The exact signal assigned to each numbered pin should be taken from the pin-description table in the Texas Instruments MC3487 datasheet. When assigning PCB tracks, follow the package pin numbering shown on the physical 16-DIP outline and connect the enable or control pins according to the datasheet's defined operating states.
Can MC3487NSR replace MC3487NG4?
The MC3487NSR is a related MC3487 family option, but it is a surface-mount ordering variant rather than a same-footprint replacement for the MC3487NG4. The MC3487NG4 uses a 16-pin through-hole dual-in-line package, while MC3487NSR is identified separately in the product family. A board designed for MC3487NG4 should therefore be compared carefully for package, lead geometry, thermal performance, and assembly process before using MC3487NSR.
What is the best drop-in replacement for MC3487NG4?
The closest same-package replacement identified for the MC3487NG4 is the Texas Instruments MC3487N, which is listed as a 16-DIP RS-422 driver. Other compatible substitutes named in the cross-reference information include SP487CS-L, DS3487N/NOPB, DS96174CN/NOPB, and DS34C87TN/NOPB. Before final substitution, verify the exact pin arrangement, supply limits, input thresholds, output timing, and package dimensions against the original board requirements.
What is the difference between MC3487NG4 and MC3487N?
The MC3487NG4 and MC3487N are both identified as 16-DIP versions of the Texas Instruments MC3487 quadruple RS-422 driver family. The visible product listings identify MC3487NG4 as a 16-PDIP and MC3487N as a 16-DIP. Exact suffix-specific operating limits and ordering details should be confirmed in the manufacturer datasheet and product records, especially when the replacement is intended for production rather than laboratory evaluation.
MC3487NG4 vs MC3486NSR - which part should be used?
Use the MC3487NG4 when the design needs four differential outputs to drive balanced lines, and use the MC3486 family when the design needs four differential inputs to receive balanced signals. The Texas Instruments product information identifies the MC3487 as the driver and the MC3486 as the recommended quadruple line receiver. They are complementary interface devices rather than interchangeable drop-in replacements, so the direction of data flow should determine the choice.
Is MC3487NG4 suitable for industrial control systems?
Yes, MC3487NG4 is suitable for industrial control and instrumentation links that use balanced differential signaling. Its four independent channels and compatibility with ANSI TIA/EIA-422-B and ITU Recommendation V.11 are appropriate for point-to-point equipment interfaces, test systems, and factory automation equipment. The final design must still account for cable length, grounding, termination, isolation requirements, environmental conditions, and the device's operating limits.
What can replace MC3487NG4?
The MC3487N is the primary same-package alternative identified for the MC3487NG4, with both listed as 16-DIP MC3487-family devices. SP487CS-L, DS3487N/NOPB, DS96174CN/NOPB, and DS34C87TN/NOPB are additional RS-422 driver substitutes named in the cross-reference results. Treat them as candidate replacements rather than automatically approved substitutions until their pinouts, electrical ratings, and package details have been checked against the original design.
Is MC3487NG4 the same as MC3487N?
The MC3487NG4 and MC3487N are closely related 16-DIP versions of the MC3487 quadruple differential line driver. The listings describe MC3487NG4 as a 16-PDIP and MC3487N as a 16-DIP. They share the core four-channel RS-422 driver function, but suffix-specific production, temperature, marking, or ordering details should be checked in the Texas Instruments documentation before treating one as an exact substitute.
What are the key specifications of MC3487NG4 engineers should know?
The key engineering facts are four independent differential driver channels, TTL-compatible buffered inputs, operation from one 5 V supply, support for ANSI TIA/EIA-422-B and ITU Recommendation V.11, and a 16-pin dual-in-line package. According to the Texas Instruments product page and datasheet, the MC3487 is intended for balanced differential line communication and is designed for use with the MC3486 quadruple line receiver.
How should the MC3487NG4 be used with an RS-422 receiver?
Connect the MC3487NG4 differential outputs to the corresponding line pair and use an appropriate RS-422 receiver at the far end, such as the MC3486 family identified by Texas Instruments. The transmitter and receiver must share compatible signal levels and use a termination arrangement appropriate to the cable and topology. The manufacturer datasheet should guide input states, output handling, supply decoupling, and any unused-channel recommendations.
Where can I buy MC3487NG4 and check its lead time?
Use the Request a Quote form on this XAIPART product page to request current availability, pricing, minimum order quantity, and lead time for MC3487NG4. The manufacturer lists the MC3487 family as available in a 16-pin dual-in-line package, but current order and delivery conditions can change. Submit the required quantity, target package, and delivery location with the quote request.
What is the MC3487NG4 price and is it in stock?
Use the Request a Quote form on this page for the current MC3487NG4 price and stock status. The product appears in the verified distributor listing as a Texas Instruments 16-PDIP driver, while one separate reseller snippet reports inventory without providing a complete current quantity-break table. Because stock and commercial terms vary by quantity and order date, request a quote for the exact quantity and package configuration you need.
What is the MC3487NG4 lead time?
The current MC3487NG4 lead time depends on order quantity, inventory position, and fulfillment method, so request it through the Request a Quote form on this page. One verified reseller listing reports 5,360 pieces as in stock but also shows the lead time as to be confirmed, which is not a firm scheduled delivery date. Provide your required quantity and target delivery date with the request.

Engineering reference data for MC3487NG4 — comparison, design guidance, and compliance information.

Selection Guide

Choose MC3487NG4 when the design requires four independent balanced differential outputs, TTL-compatible control inputs, one 5 V supply, and a through-hole 16-pin DIP implementation. MC3487N is the closest same-manufacturer alternative identified in the product listings and should be selected when its ordering and lifecycle terms better fit production requirements. SP487CS-L, DS3487N/NOPB, DS96174CN/NOPB, and DS34C87TN/NOPB are candidate cross-reference substitutes for an RS-422 transmitter, but they require a pin-level and timing review before release. The MC3487NSR is useful for compact surface-mount designs but is not a same-footprint replacement for an existing MC3487NG4 board. Use MC3486-family receivers with the MC3487 family and validate termination, grounding, cable length, common-mode limits, and supply requirements against the complete interface specification.

Comparison with Alternatives

Parameter This Product MC3487N SP487CS-L DS3487N/NOPB DS96174CN/NOPB DS34C87TN/NOPB
Brand Texas Instruments Texas Instruments Exar Texas Instruments Texas Instruments Texas Instruments
Package 16-PDIP 16-PDIP 16-PDIP 16-PDIP 16-PDIP 16-PDIP
Driver Channels 4 4 4 4 4 4
Interface Standard ANSI TIA/EIA-422-B and ITU Recommendation V.11 RS-422 driver RS-422 driver RS-422 driver RS-422 driver RS-422 driver
Output Configuration Four independent differential outputs Four differential outputs Differential RS-422 outputs Differential RS-422 outputs Differential RS-422 outputs Differential RS-422 outputs
Mounting Style Through-hole Through-hole Through-hole Through-hole Through-hole Through-hole

Key Differentiators

  • Four independent differential channels in one 16-DIP package (vs MC3487N)
  • Single 5 V supply operation (vs SP487CS-L)
  • Manufacturer-designated receiver pairing (vs DS96174CN/NOPB)
  • Established standards alignment (vs DS34C87TN/NOPB)

Design Notes

Route each differential pair as a tightly coupled pair on the PCB and keep the two conductors of a channel together through connector and transition areas. The MC3487NG4 provides four differential outputs, so preserve pair geometry across all four channels and minimize stubs from test points or protection components. Follow the pin assignments in the manufacturer datasheet when assigning connector pinouts, and provide a solid ground reference near the device to reduce susceptibility to common-mode noise.

Do not treat a balanced driver as a complete RS-422 interface. The receiving device, cable impedance, termination, reference ground, and connector shield all affect operation. Confirm the cable length and data rate against the selected receiver and TI MC3487 documentation, and avoid assuming that a receiver with a similar function is automatically compatible with every timing and common-mode requirement.

The MC3487NG4 operates from one 5 V supply. Place the required supply decoupling close to the supply and ground pins, with short return paths and solid ground-plane continuity. Account for the total supply current of four active drivers plus the input-state current of the surrounding logic. Validate the power budget at the highest expected channel activity rather than estimating from a lightly loaded channel.

Termination belongs at the receiver end of the line in the standard point-to-point arrangement; placing it at the transmitter can create an unnecessary load and alter signal behavior. Confirm the receiver topology and cable characteristics before deciding whether additional termination, biasing, or protection is appropriate. For long cables or noisy industrial environments, evaluate common-mode limits and grounding rather than relying exclusively on differential signaling.

Compliance Information

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Lead Free
Unknown
Halogen Free
Unknown
Conflict Minerals
Unknown

The manufacturer product information identifies the electrical standards and package but does not provide explicit RoHS, REACH, lead-free, halogen-free, or conflict-minerals statements in the retrieved excerpts. Automotive qualification is not indicated for this interface device.

Data verified on: 2026-11-11 — data verified and curated by XAIPART's component engineering team

Related Searches

mc3487n pdf mc3487n price mc3487n pinout mc3487n circuit mc3487n equivalent mc3487n substitute mc3487n application mc3487n texas instruments MC3487NG4 datasheet MC3487NG4 pinout MC3487NG4 drop-in replacement MC3487NG4 16-PDIP MC3487NG4 RS-422 driver MC3487NG4 vs MC3487N MC3487NG4 price

Related Components & Terms

Texas Instruments MC3487NG4 MC3487N MC3487NSR MC3486 MC3486NSR SP487CS-L DS3487N/NOPB DS96174CN/NOPB DS34C87TN/NOPB quadruple differential line driver RS-422 line driver differential line driver balanced differential signaling TTL-compatible input ANSI TIA/EIA-422-B ITU Recommendation V.11 16-PDIP dual-in-line package 5 V power supply industrial control interface point-to-point communication data acquisition factory automation
Quick Quote RFQ
Fill in complete details — our sales team will respond within 24 hours
Part Number Manufacturer Package QTY Target Price Extended
✓
Quote submitted!

We will respond to your email within 24 hours

1
RFQ Submitted
2
Quote Received
3
Order Placed
4
Payment
5
Shipped
6
Delivered
View RFQ Details