NXP Semiconductors

MC34978ES - 22-Switch SPI Interface | NXP | QFN-32

MPN: MC34978ES ✗ End of Life
3.3 V / 5.0 V Vdss 32-QFN-EP (5x5 mm) Package
MOQ: 1 |

MC34978ES Overview

The NXP Semiconductors MC34978ES is a specialized multiple-switch detection interface that monitors up to 22 switch contacts and transfers their open or closed status to a host processor through a serial peripheral interface. It operates from a 3.3 V or 5.0 V supply and is packaged in a 32-pin QFN with exposed pad, designated 32-QFN-EP (5x5), for compact surface-mount designs.

A multiple-switch detection interface is an interface IC that converts many physical switch or contact states into a compact digital representation. It belongs to the broader hierarchy of SPI interface IC, serial interface, interface IC, and semiconductor. Such devices reduce the number of host GPIO pins and wiring connections needed in control panels, appliance interfaces, automotive switch assemblies, and industrial equipment.

The primary advantage of the MC34978ES is its combination of 22 input channels and SPI communication. This allows a microcontroller to poll switch status efficiently instead of reading each contact individually. The 3.3 V and 5.0 V operating choices support both modern low-voltage embedded systems and designs based on 5 V logic. Its 5x5 mm QFN-EP package also supports compact layouts, although the exposed pad requires careful PCB thermal design.

The MC34978 family uses an SPI interface to report switch opening and closing events. Because the SPI bus can carry the state information over a compact connection, the device is particularly useful where numerous panel switches, interlocks, or discrete contacts must be monitored. Host firmware remains responsible for debouncing contact transitions, interpreting the status registers, and reporting meaningful events to the application.

Typical uses include appliance control panels, industrial operator consoles, building-control panels, automotive switch interfaces, and compact human-machine-interface assemblies. In each case, the device can concentrate repeated contact monitoring while leaving the host processor available for user-interface logic, communications, safety supervision, or system control. Electrical isolation, pull-up arrangements, and grounding should be evaluated in the final switch matrix.

The primary design consideration is the exposed-pad footprint and the exact input configuration. Place the device according to the manufacturer land-pattern and exposed-pad guidance, connect all required supply and ground pins, and observe the specified operating-voltage range. Review the pin-description table in the manufacturer datasheet when assigning the switch inputs and SPI connections; incorrect signal mapping can disable a channel or interfere with the serial interface.

This product record combines the documented 22-switch, 3.3 V, 5.0 V, SPI, and 32-QFN-EP characteristics with application guidance, comparison parameters, and replacement analysis. It is intended to help engineers evaluate the MC34978ES before integrating it into an embedded control system.

Drop-in alternatives for MC34978ES — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.

MC34978AES

✅ Drop-In
📦 32-QFN-EP (5x5)
Same-family suffix with the stated 22-switch and 3.3 V / 5.0 V SPI function unchanged; exact temperature and order-code differences are not established.

📋 Reference alternative (not in catalog)

MC34978ESR2

✅ Drop-In
📦 32-QFN-EP (5x5)
Same NXP MC34978ES family and stated switch-interface function; reel-code and suffix-specific feature differences require datasheet confirmation.

📋 Reference alternative (not in catalog)

MC34978ES Maximum Ratings & Electrical Characteristics

Product Type Multiple Switch Detection Interface
Maximum Switch Contacts 22 contacts
Host Interface SPI serial peripheral interface
Supply Voltage Options 3.3 V / 5.0 V
Switch Status Reporting Open and closed contact states
Package 32-QFN-EP (5x5 mm)
Total Pin Count 32 pins
Exposed Pad Present
Mounting Type Surface mount

MC34978ES 32-qfn-ep (5x5 mm) Pin Configuration Guide

Pin configuration for MC34978ES (32-qfn-ep (5x5 mm) package). Pin numbering, functions, and connection diagrams are defined in the manufacturer datasheet. Refer to it for the exact footprint and soldering guidelines.

32-qfn-ep (5x5 mm) package pinout diagram for MC34978ES

No detailed pinout data available for MC34978ES.

Refer to the datasheet for full pin configuration.

Typical Applications

MC34978ES is suitable for 6 applications: Appliance Control Panel, Industrial Operator Console, Automotive Switch Interface, Building-Control User Interface, Instrumentation Front Panel, Compact Human-Machine Interface.

🏭

Appliance Control Panel

The MC34978ES is suitable for an appliance control panel containing numerous pushbuttons, selectors, or interlock contacts. Its ability to detect up to 22 switch states through an SPI interface reduces the number of host GPIO connections and simplifies wiring between the switch assembly and a microcontroller. The controller can read the status registers, apply contact-debounce logic, and translate valid transitions into appliance functions such as mode selection, door detection, or start and stop commands. Supporting both 3.3 V and 5.0 V operation makes the interface adaptable to different embedded-control architectures. The 32-QFN-EP package keeps the switch front end compact, although the exposed pad and dense 5x5 mm footprint require careful land-pattern implementation and thermal verification.

🏭

Industrial Operator Console

The MC34978ES fits an industrial operator console that combines many membrane switches, selector contacts, and machine-state inputs with a central embedded controller. Detecting up to 22 contacts over SPI gives the host processor a scalable way to acquire panel information without allocating one GPIO per switch. Firmware can debounce transitions, manage access functions, and report operating conditions through the machine network. The supported 3.3 V and 5.0 V supply options allow alignment with different control subsystems. For industrial deployment, validate temperature limits, ESD requirements, input thresholds, and isolation or filtering needs against the final panel wiring. The compact 32-QFN-EP package supports dense controller boards, while its exposed pad must be connected according to the manufacturer layout guidance.

🚗

Automotive Switch Interface

The MC34978ES can serve as the switch-detection element in an automotive control module when its exact qualification and environmental limits satisfy the vehicle program. Up to 22 contacts may be consolidated through the SPI interface, leaving the host controller available for vehicle-network handling and higher-level functions. The 3.3 V or 5.0 V operating choices support integration with embedded automotive electronics, while the 32-QFN-EP package provides a compact surface-mount footprint. Automotive use requires more than package compatibility: confirm the applicable temperature range, ESD and transient requirements, AEC-Q100 status, diagnostic behavior, and production-availability strategy in the manufacturer documentation before releasing the design for production.

🧩

Building-Control User Interface

The MC34978ES is applicable to a building-control user interface containing room controls, call points, access buttons, and occupancy-related contacts. Its 22-channel switch-detection capability and SPI host interface provide an efficient way to bring multiple physical inputs into a distributed controller. The MCU can distinguish open and closed states, debounce contacts, associate each input with a configured zone, and publish events over the building network. Both 3.3 V and 5.0 V supply options support different controller architectures. When the interface is installed on a long cable or in a harsh environment, add protection appropriate to the installation and confirm the device input thresholds and absolute limits from the manufacturer datasheet. The small QFN footprint also helps when the interface PCB must fit behind a wall plate or compact control enclosure.

🔧

Instrumentation Front Panel

The MC34978ES can be used in a test or measurement instrument that presents numerous front-panel switches to the instrument controller. Up to 22 contact states can be transferred over SPI, simplifying the connection between controls and a measurement processor while preserving processor I/O for sensors, displays, and communications. This arrangement supports functions such as range selection, trigger input, channel enable, and menu navigation. The 3.3 V and 5.0 V operating options accommodate different logic rails within the instrument, and the 32-QFN-EP package supports compact controller boards. Verify switch bounce behavior, input voltage thresholds, ground-reference strategy, and exposed-pad layout in the manufacturer datasheet. For precision measurements, keep switching transients and switch-supply routing away from sensitive analog sections.

📺

Compact Human-Machine Interface

The MC34978ES suits a compact human-machine interface where a keypad, toggle bank, or safety-related contact set must communicate with a display-oriented embedded controller. Its SPI switch-detection function allows up to 22 contacts to be consolidated behind a compact interface, reducing connector size and host GPIO usage. The host processor can scan status, manage multi-press behavior, and present menu or diagnostic information on the display. Its support for 3.3 V and 5.0 V supplies enables use with different display-controller and communication subsystems. Because the device is identified as obsolete, a new compact HMI should include an approved alternate sourcing plan before layout release. Confirm the exact pinout, input levels, timing, and thermal layout from the manufacturer documentation and verify switch bounce in the finished assembly.

What is the MC34978ES?
The MC34978ES is a NXP specialized multiple-switch detection interface that monitors up to 22 switch contacts and reports their open or closed states to a host processor through an SPI interface. According to the manufacturer product information, it supports 3.3 V and 5.0 V operation and is offered in a 32-QFN-EP package. It is intended for systems in which many physical switches or contacts must be read without assigning a separate host GPIO pin to every input.
How many switches can the MC34978ES detect?
The MC34978ES can detect up to 22 switch contacts. The open or closed status of those contacts is transferred through the SPI interface to the host processor. According to the manufacturer datasheet description, each detected contact can be monitored as either open or closed. Host firmware should still account for mechanical contact bounce and validate the switch matrix configuration before treating a transition as a confirmed user action.
What interface does the MC34978ES use to communicate with a microcontroller?
The MC34978ES communicates with a host processor through the SPI serial peripheral interface. SPI is a synchronous serial interface that supports compact wiring and efficient transfer of switch-state information. According to the manufacturer datasheet, the interface transfers the status of as many as 22 switch contacts. The exact supported clock rate, mode configuration, and data framing should be taken from the manufacturer timing and register descriptions.
What supply voltage is required by the MC34978ES?
The MC34978ES is specified for 3.3 V and 5.0 V operation. The manufacturer product information identifies both supply options for the MC34978 family. The appropriate rail should match the logic requirements of the host processor and the switch-detection circuitry. Confirm pin-specific supply connections, decoupling requirements, and absolute maximum limits in the manufacturer datasheet before applying power.
Where can I download the MC34978ES datasheet PDF?
The manufacturer datasheet for MC34978ES can be obtained through the official NXP product page linked on this product page. The manufacturer documentation contains the authoritative pin descriptions, electrical characteristics, SPI timing, switch-input configuration, and land-pattern guidance. For an alternate copy, the MC34978ES PDF link in the source list can also be consulted, but the NXP document should remain the controlling reference for design and qualification decisions.
Where is the MC34978ES pinout located?
The MC34978ES pinout is located in the pin-description table and package drawing of the manufacturer datasheet. The device uses a 32-QFN-EP package with an exposed pad, so the exposed pad must be handled according to the manufacturer land-pattern guidance rather than treated as an ordinary signal pin. Use the pin table to assign the 22 switch inputs, SPI signals, supply, ground, and control functions before laying out the PCB.
What package does the MC34978ES use?
The MC34978ES uses a 32-QFN-EP package measuring 5x5 mm. The exposed pad provides a thermal and electrical connection to the PCB according to the manufacturer layout instructions. Its compact surface-mount construction suits equipment with limited panel or controller-board area. Because QFN lead pitches are compact, verify the land pattern, solder mask, paste geometry, and reflow profile against the manufacturer package documentation.
Where can I buy the MC34978ES online?
The MC34978ES can be requested through the Request a Quote form on this page. The form is the appropriate channel for checking current availability, condition, quantity breaks, and delivery timing without relying on a stale listing. Because the part is identified as obsolete, state the required quantity, date code, packaging preference, and target quantity in the request so the supply response can be evaluated accurately.
How much does the MC34978ES cost?
Current pricing for the MC34978ES should be obtained through the Request a Quote form on this page. Because the device is identified as obsolete, its commercial status may depend on remaining factory inventory, original packing, date code, and order quantity. Submit the required quantity and acceptable date-code condition with the request to obtain a current quotation rather than relying on an outdated historical amount.
What is the lead time for the MC34978ES?
The current lead time for MC34978ES should be confirmed through the Request a Quote form on this page. Since the device is identified as obsolete, lead time can depend on available inventory rather than a normal production schedule. Include your required quantity, target delivery date, acceptable date code, and packaging requirements when requesting the quotation so supply timing can be matched to the assembly plan.
Is the MC34978ES in stock?
Current MC34978ES stock status should be confirmed through the Request a Quote form on this page. The part is identified as obsolete, so inventory can be limited and may not persist across quote cycles. Provide the required quantity and acceptable date-code condition in the request. The resulting response can then be compared with the production schedule and any risk associated with fitting an obsolete component into a new design.
What is the difference between MC34978ES and MC34978AES?
The MC34978ES and MC34978AES are members of the same NXP MC34978 switch-detection family and are both associated with the 22-switch, 3.3 V or 5.0 V SPI interface and a 32-QFN-EP package. The visible manufacturer listing describes MC34978AES as a 22-switch QFN32 device. Suffix-specific temperature, qualification, or order-code differences should be confirmed in the datasheet before treating either part as a substitute.
MC34978ES vs MC34978AES - which one should I select?
Select MC34978AES when its exact temperature range, qualification, and order-code terms fit the target design and production plan. Select MC34978ES when that exact suffix is required by an existing BOM or approved second source. Both parts occupy the 32-QFN-EP MC34978 interface family, but matching the package and nominal 22-switch SPI function does not by itself prove that every suffix-specific electrical or qualification parameter is identical.
When should I choose MC34978ES instead of another switch-detection interface?
Choose MC34978ES when the design needs the established NXP 22-channel switch-monitoring function, SPI host communication, and support for either 3.3 V or 5.0 V operation in a 32-QFN-EP footprint. It is especially appropriate for equipment with dense control panels, interlocks, or appliance switches where reducing GPIO usage is valuable. Because the device is obsolete, choose it mainly for existing qualified designs or controlled sourcing rather than unrestricted new-product proliferation.
Is the MC34978ES suitable for an industrial control panel?
The MC34978ES is architecturally suitable for an industrial control panel that contains numerous switches and can accommodate a 3.3 V or 5.0 V SPI host interface. Its 22 switch inputs can reduce discrete host GPIO requirements and wiring complexity. Industrial suitability must still be checked against temperature range, electrical limits, EMC requirements, diagnostic behavior, and any long-term availability risk associated with the obsolete lifecycle status.
What is the best drop-in replacement for MC34978ES?
No fully confirmed cross-brand drop-in replacement for MC34978ES has been established from the available technical sources. MC34978AES and MC34978ESR2 are the closest same-family candidates associated with the 32-QFN-EP switch-detection function, but suffix-specific electrical and qualification requirements must be checked before substitution. A replacement should be approved only after confirming pinout, voltage, SPI timing, switch-input behavior, temperature range, and exposed-pad requirements.
Can MC34978AES replace MC34978ES?
MC34978AES can be evaluated as a same-family replacement for MC34978ES because both are NXP MC34978-series devices associated with 22-switch SPI operation and the 32-QFN-EP package. The replacement is not automatically unconditional: confirm the manufacturer pin table, electrical limits, SPI timing, temperature range, and qualification in each order code. If those characteristics match the approved design, the shared package can support a board-level substitution.
What can replace the MC34978ES?
The most credible replacements for MC34978ES are same-family NXP variants such as MC34978AES and MC34978ESR2, subject to suffix-specific verification. The available sources do not identify a cross-brand part with a confirmed identical 32-pin pinout, 22-switch function, 3.3 V and 5.0 V operation, and matching SPI timing. For an existing PCB, use the manufacturer pin table to confirm drop-in compatibility rather than relying only on the package name.
What are the key specifications of MC34978ES that engineers should know?
The key MC34978ES specifications are 22 switch-detection contacts, SPI host communication, 3.3 V or 5.0 V operation, and a 32-QFN-EP package measuring 5x5 mm. According to the manufacturer product information, the device transfers each switch's open or closed status to a microprocessor through SPI. The exposed pad and compact lead pitch are especially important PCB-layout considerations, while the obsolete lifecycle status requires an explicit supply-risk review.

Engineering reference data for MC34978ES — comparison, design guidance, and compliance information.

Selection Guide

Choose MC34978ES when an existing approved design specifies that exact NXP order code, particularly where up to 22 switch contacts must be reported through SPI using a 32-QFN-EP footprint. Its documented 3.3 V and 5.0 V operating choices support both legacy 5 V logic and lower-voltage embedded systems. MC34978AES is the closest same-family option to evaluate when its temperature range, qualification, and order-code details better match a new design, but it should not replace the exact target suffix without engineering approval. MC34978ESR2 may serve as another family-level sourcing option, subject to confirmation of reel code, electrical characteristics, and lifecycle status. No cross-brand equivalent with a confirmed identical pinout and parameter set was identified. For new production, consider the obsolete lifecycle status carefully and maintain a controlled alternate-part strategy rather than making an unqualified cross-brand substitution.

Comparison with Alternatives

Parameter This Product MC34978AES MC34978ESR2
Product Type Multiple Switch Detection Interface Switch Detection Interface MC34978ES-family switch interface
Brand NXP Semiconductors NXP Semiconductors NXP Semiconductors
Package 32-QFN-EP (5x5) 32-QFN-EP (5x5) 32-QFN-EP (5x5)

Key Differentiators

  • Consolidates numerous physical contacts into a serial host interface (vs MC34978AES)
  • Supports two common embedded logic supply levels (vs MC34978ESR2)
  • Combines dense switch acquisition with a compact exposed-pad package (vs MC34978AES)

Design Notes

Use the manufacturer QFN-EP land pattern and exposed-pad connection exactly as documented. Keep switch-input traces away from sensitive analog or high-speed timing nets, place the device close to the connector or switch matrix, and provide a solid ground reference beneath the exposed pad. Compact lead spacing makes assembly sensitive to solder mask, paste coverage, and trace-width variation, so verify the selected footprint mechanically and electrically against the package drawing.

Assign all 22 switch inputs according to the manufacturer pin-description table rather than inferring their order from the package drawing. Confirm whether each input requires an external pull-up, pull-down, or passive protection component for the selected switch topology. Route panel wiring away from clocks, SPI edges, and power-converter switching nodes, and use a common ground reference for the host and switch matrix to minimize false state transitions.

SPI clock and data traces should be short, referenced to a continuous ground plane, and kept away from switch wiring that may carry electrostatic-discharge pulses. For cable-connected switch panels, provide appropriate series damping or filtering and verify that transient protection current is directed away from the IC. Firmware must also debounce mechanical contacts; filtering hardware and software debounce complement rather than replace one another.

Place the required input and bypass capacitors close to their designated supply pins, with the shortest possible return path. Decouple the device according to the manufacturer application circuit rather than relying on bulk capacitance elsewhere on the board. Before power-up, verify that the selected 3.3 V or 5.0 V rail remains within the operating limits at the device pins and that all switch-node voltages cannot exceed the specified absolute maximum values.

Do not treat the shared MC34978 family name as proof that every suffix has identical temperature, qualification, or order-code characteristics. Before substituting MC34978AES or MC34978ESR2, compare the manufacturer pin table, electrical limits, SPI timing, and qualification details. Also account for the obsolete lifecycle status by documenting lot traceability, date-code requirements, approved alternatives, and the effect of a late-life component on production testing and field service.

Compliance Information

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Lead Free
Unknown
Halogen Free
Unknown
Conflict Minerals
Unknown

The available product information does not state the compliance or automotive-qualification status of MC34978ES. Confirm these attributes from the manufacturer product page or the applicable NXP material declaration.

Data verified on: 2026-11-11 — data verified and curated by XAIPART's component engineering team

Related Searches

MC34978ES datasheet MC34978ES pinout MC34978ES datasheet pdf MC34978ES 22 switch interface MC34978ES 3.3V 5V SPI MC34978ES QFN32 MC34978ES drop-in replacement MC34978ES equivalent MC34978ES vs MC34978AES MC34978ES price MC34978ES stock NXP MC34978ES MC34978ES switch detection circuit MC34978ES QFN-EP footprint What replaces MC34978ES

Related Components & Terms

NXP Semiconductors MC34978ES MC34978AES MC34978ESR2 multiple-switch detection interface switch detection interface interface IC serial peripheral interface SPI microcontroller host processor 22-switch input 3.3 V supply 5.0 V supply 32-QFN-EP QFN family surface mount SMD package 5x5 mm package exposed pad open-contact detection closed-contact detection control panel industrial automation automotive switch interface
Quick Quote RFQ
Fill in complete details — our sales team will respond within 24 hours
Part Number Manufacturer Package QTY Target Price Extended
✓
Quote submitted!

We will respond to your email within 24 hours

1
RFQ Submitted
2
Quote Received
3
Order Placed
4
Payment
5
Shipped
6
Delivered
View RFQ Details