Texas Instruments

PCM3002EG - 20-Bit Low-Power Stereo Codec | TI

MPN: PCM3002EG ✓ Active
24-pin SSOP Package
MOQ: 1 |

PCM3002EG Overview

The Texas Instruments PCM3002EG is a low-power 20-bit stereo audio codec with two analog-to-digital converters, two digital-to-analog converters, single-ended analog inputs and outputs, and software-controlled line output. The device is packaged in a 24-pin SSOP for conventional surface-mount audio processing designs.

An audio codec is an integrated circuit that converts analog audio signals into digital data and converts digital audio data back into analog signals. Its role within an audio signal chain is wider than that of a standalone ADC or DAC: the codec integrates conversion circuitry, a digital audio interface, analog input and output channels, and the control functions needed to manage a compact stereo audio path. PCM3002EG belongs to the broader hierarchy of audio codec, interface IC, data converter, and power-management-assisted signal-chain IC.

The PCM3002EG combines 2 ADC channels and 2 DAC channels with 20-bit resolution. Its single-ended analog input architecture supports two stereo input channels, while its two DAC outputs support stereo playback. The line-output stage includes software control, allowing an audio system to manage output behavior through the digital control interface. The low-power designation makes the codec relevant to compact audio equipment where energy efficiency and integration are important.

The PCM3002EG uses a 20-bit serial audio interface, according to the product listing for this exact ordering code. This interface connects the codec to a digital signal processor, microcontroller, application processor, or other audio controller. The 24-pin SSOP package provides a defined PCB footprint while keeping the analog and digital functions in one component. Designers should follow the manufacturer datasheet for the exact clock, format, control, voltage, and de-identification details when laying out the circuit.

Typical applications include digital audio recording, compact stereo playback equipment, audio capture modules, multimedia appliances, and embedded systems that need both microphone or line-level input and line-level output. In a recording path, the two ADC channels digitize left and right analog sources. In a playback path, the two DAC channels reconstruct stereo audio. Software-controlled line output is useful when the system needs configurable output behavior under processor control.

For a new design, verify the codec's supported sample rate, operating voltage, master-clock requirements, analog input range, digital interface format, and pin-level bypass recommendations against the current manufacturer datasheet. These details determine whether the PCM3002EG can be connected directly to the chosen host processor or whether level-shifting, filtering, or additional clock circuitry is required.

This page consolidates the exact PCM3002EG ordering information, manufacturer product resources, technical attributes, verified drop-in comparison requirements, and practical integration guidance. It is designed to help engineers evaluate the 20-bit stereo codec, inspect its SSOP footprint, confirm interface requirements, and plan sourcing through a structured request-for-quote workflow.

Drop-in alternatives for PCM3002EG — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.

PCM3002EG/2K

✅ Drop-In
📦 24-SSOP (0.209 in / 5.30 mm)
Identical die, pinout and electricals; difference is packing only (tape and reel vs tube), 0% parameter difference

📋 Reference alternative (not in catalog)

PCM3003EG

✅ Drop-In ⚠️ Specs Unverified
📦 24-SSOP (0.209 in / 5.30 mm)
Same 16/20-bit delta-sigma stereo core in the same 24-SSOP footprint; control changes from software to hardware mode pins, so mode configuration moves from firmware to board wiring

📋 Reference alternative (not in catalog)

PCM3003EG/2K

✅ Drop-In ⚠️ Specs Unverified
📦 24-SSOP (0.209 in / 5.30 mm)
Hardware-control variant of the PCM3003 in tape-and-reel packing; same 24-SSOP footprint, but software control on the PCM3002EG is replaced by hardware mode pins

📋 Reference alternative (not in catalog)

PCM3002EG Specifications

Product Type Low-power stereo audio codec
ADC Resolution 20 bit
DAC Resolution 20 bit
ADC Count 2
DAC Count 2
Input Channels 2
Output Channels 2
Analog Input Type Single-ended
Analog Output Type Single-ended
Digital Audio Interface 20-bit serial interface
Line Output Control Software controlled
Package 24-pin SSOP
Package Type SSOP
Pin Count 24 pins
Mounting Type Surface mount
Packaging Form Tube

PCM3002EG ssop Pin Configuration Guide

Pin configuration for PCM3002EG (ssop package). Pin numbering, functions, and connection diagrams are defined in the manufacturer datasheet. Refer to it for the exact footprint and soldering guidelines.

ssop package pinout diagram for PCM3002EG

No detailed pinout data available for PCM3002EG.

Refer to the datasheet for full pin configuration.

Typical Applications

PCM3002EG is suitable for 6 applications: Stereo Digital Audio Recording, Compact Stereo Playback Equipment, Audio Capture Module, Multimedia Terminal Audio Interface, Embedded Audio Control System, Line-Level Audio Interface.

🎧

Stereo Digital Audio Recording

The PCM3002EG fits a two-channel recording front end because it combines 2 single-ended ADCs with 20-bit resolution and a 20-bit serial interface. Left and right analog sources can be digitized and passed to a digital signal processor, microcontroller, or audio controller without adding separate converter packages. The integrated codec also provides 2 DAC channels for monitoring or immediate playback. Before finalizing the circuit, verify the supported sampling rate, analog input range, required master clock, and bypass network against the manufacturer datasheet. Proper grounding and short, quiet analog traces remain essential because the codec resolves 20-bit audio only when the surrounding front end does not add unacceptable noise or distortion.

📱

Compact Stereo Playback Equipment

PCM3002EG is suitable for compact stereo playback equipment requiring both digital-to-analog conversion and optional audio input support. Its 2 DAC channels produce left and right analog outputs, while software-controlled line output allows the host controller to manage output behavior digitally. In a playback appliance, the codec can sit between a digital audio source and line-level output stages, reducing the number of discrete converter packages. The 24-pin SSOP package supports conventional surface-mount assembly, although its footprint dimensions and pin-clearance rules must be checked before layout. Validate the digital audio format, clocking arrangement, output loading, and analog filtering requirements before release to production.

📱

Audio Capture Module

The PCM3002EG can form the core of a stereo audio capture module because it provides two single-ended ADC channels, two DAC channels, and a 20-bit serial data interface in one IC. A host processor can receive digital samples from left and right line-level sources while using the DAC outputs for local monitoring. This integration is useful where component count and PCB area matter, but it does not remove the need for input conditioning, grounding, reference design, and clock generation. Check the supported sampling frequencies and analog dynamic range in the Texas Instruments PCM3002 documentation, then confirm that the module's connector, coupling capacitors, and ground strategy preserve signal integrity.

🖥️

Multimedia Terminal Audio Interface

PCM3002EG is appropriate for multimedia terminals that need a bidirectional stereo audio path around a digital processor. The processor can stream serial audio to the codec for playback and receive converted samples from analog input sources during capture. Because the device includes 2 ADCs and 2 DACs, a two-channel implementation can avoid separate stereo converter ICs. Its software-controlled line output also supports processor-managed mute, level, or operating-mode decisions when supported by the control interface. The design must still confirm electrical interface levels, supported data formats, sample-rate handling, and power sequencing in the datasheet. Layout should isolate sensitive analog returns from digital clock and serial-data paths.

🏭

Embedded Audio Control System

The PCM3002EG can serve as the audio conversion element in an embedded control system with digital signal processing, monitoring, or communication functions. Its 20-bit serial interface provides a direct path to a digital controller, while the 2 ADC channels support feedback or sensor-derived audio and the 2 DAC channels support command prompts or local monitoring. The low-power stereo codec designation is attractive for compact embedded equipment, but actual system power depends on supply voltage, sample rate, clocking, and external circuitry. Use the manufacturer datasheet to confirm operating limits and pin functions, and design the analog section to use the specified reference and bypass components.

🔧

Line-Level Audio Interface

PCM3002EG is suited to line-level stereo interface designs because it accepts single-ended analog inputs and provides single-ended analog outputs with software-controlled line-output behavior. Two input channels and two output channels support standard left/right audio routing while keeping the data-conversion block in one package. The 24-pin SSOP form factor requires attention to analog-pin placement and exposed routing on the PCB, but it avoids the footprint area of multiple converter components. Exact line-input amplitude, output load, bandwidth, distortion, and channel-separation requirements must be verified in the datasheet. A prototype should also confirm that the host's clock and serial interface configuration produces valid data at the intended sample rate.

Recommended Products Summary

PCM3002EG Texas Instruments Used in: Stereo Digital Audio Recording, Compact Stereo Playback Equipment, Audio Capture Module, Multimedia Terminal Audio Interface, Embedded Audio Control System, Line-Level Audio Interface PCM3002EG/2K Same PCM3002 family in 2000-piece reel configuration Used in: Stereo Digital Audio Recording, Compact Stereo Playback Equipment, Audio Capture Module, Multimedia Terminal Audio Interface, Embedded Audio Control System, Line-Level Audio Interface
What is the Texas Instruments PCM3002EG?
The PCM3002EG is a low-power stereo audio codec with 2 ADCs, 2 DACs, 20-bit conversion resolution, single-ended analog I/O, and software-controlled line output in a 24-pin SSOP package. According to the Texas Instruments PCM3002 product page and the PCM3002EG component listing, it combines two input channels and two output channels with a 20-bit serial audio interface. It is intended for compact systems that need bidirectional stereo audio conversion rather than only analog-to-digital or only digital-to-analog conversion.
What are the key specifications of PCM3002EG that engineers should know?
The key PCM3002EG specifications are 2 ADC channels, 2 DAC channels, 20-bit resolution, single-ended analog inputs and outputs, a 20-bit serial interface, software-controlled line output, and a 24-pin SSOP package. The manufacturer describes the device as a low-power stereo codec. Exact operating voltage, maximum sampling rate, signal-to-noise ratio, clock requirements, and analog input range should be confirmed in the Texas Instruments PCM3002 datasheet before schematic and PCB signoff.
Where can I download the PCM3002EG datasheet PDF?
The PCM3002EG datasheet and supporting documentation are reached from the official Texas Instruments PCM3002 product page at https://www.ti.com/product/PCM3002. Use the datasheet link on that page for the PDF and technical documentation. The exact ordering code PCM3002EG is also identified in the manufacturer-related data-sheet result for the PCM3002EG/2K, which describes the device as a 16/20-bit single-ended analog I/O stereo audio codec.
Where can I find the PCM3002EG pinout?
Use the pin-description table and package drawing in the Texas Instruments PCM3002 datasheet to locate the PCM3002EG pinout. The component is identified as a 24-pin SSOP, so the package drawing and pin table must be read together before assigning signals. Confirm analog grounds, power pins, clock connections, serial data, control inputs, and bypass requirements directly from the datasheet rather than inferring them from a generic audio-codec pinout.
PCM3002EG vs PCM3008SPWRDL - which is better for a stereo audio design?
PCM3008SPWRDL is the only comparison candidate with a directly stated functional-equivalence claim, but its package differs from the 24-pin SSOP PCM3002EG. It is therefore not a pin-for-pin drop-in replacement and requires PCB layout changes. PCM3002EG is preferable when the existing board uses its SSOP footprint; PCM3008SPWRDL should be evaluated only when the design can be reworked and its pinout, interface, and electrical characteristics are independently verified.
When should I choose PCM3002EG instead of another stereo audio codec?
Choose PCM3002EG when the design specifically needs a 20-bit stereo codec with two ADC channels, two DAC channels, single-ended analog I/O, software-controlled line output, and a 24-pin SSOP footprint. It is especially suitable when a current board is already laid out for this package and the host processor can support its 20-bit serial interface. A different codec should be selected only when another device offers a necessary feature, improved verified performance, or a package that avoids redesign.
Is PCM3002EG suitable for digital audio recording?
Yes, PCM3002EG can support digital audio recording because it includes 2 single-ended ADC channels with 20-bit resolution. It can digitize left and right analog sources and transfer the resulting audio through its 20-bit serial interface. Practical suitability also depends on the required sample rate, input signal amplitude, clocking, bandwidth, and system noise floor, which must be checked in the manufacturer datasheet and in the complete analog front-end design.
What is the best drop-in replacement for PCM3002EG?
No verified pin-to-pin drop-in replacement for PCM3002EG is established by the available manufacturer and cross-reference information. PCM3008SPWRDL is described as functionally equivalent in one comparison result, but it uses a different package and therefore is not a drop-in replacement for an existing PCM3002EG board. Do not substitute it without checking its pin assignments, dimensions, clock requirements, interface format, control logic, and analog specifications.
Can PCM3008SPWRDL replace PCM3002EG on the same PCB?
PCM3008SPWRDL cannot be treated as a same-PCB replacement for PCM3002EG because the packages differ: PCM3002EG is a 24-pin SSOP, while PCM3008SPWRDL is identified as a TSSOP device. Even if electrical performance is close, a footprint change and pin-function review are required. Treat it as a redesign alternative rather than a drop-in component, and verify every signal and power connection against the relevant manufacturer documentation.
Where can I buy PCM3002EG online?
Use the Request a Quote form on this page to request PCM3002EG pricing, stock confirmation, lead time, and order details. The form is the appropriate route for a quote-first electronic component request and keeps commercial terms tied to the current inquiry. The verified listings identify PCM3002EG in a 24-pin SSOP package, but their snippets do not provide qualifying quantity-break prices, so no static price figures are reproduced here.
What is the price of PCM3002EG?
PCM3002EG pricing depends on order quantity, current inventory, packaging, and supply conditions, so it should be obtained through the Request a Quote form on this page. The verified component pages confirm the exact MPN and describe the 24-pin SSOP package, but their snippets do not print an eligible quantity-break price table. Request a quote for the quantity and package you need rather than relying on a stale marketplace figure.
What is the lead time for PCM3002EG?
The current lead time for PCM3002EG should be confirmed through the Request a Quote form on this page. Lead time can vary with the requested quantity, tube quantity, and current factory or distribution inventory. The exact ordering code and its 24-pin SSOP packaging are established, but a numeric lead-time commitment should be accepted only after confirmation for the specific order.
Is PCM3002EG in stock?
Current PCM3002EG stock should be confirmed through the Request a Quote form on this page. A component listing showing an order prompt does not by itself establish present inventory at a defined quantity. Include your required quantity, target date, and tube quantity in the request so the supply response can reflect the actual production need.
What can replace PCM3002EG in an audio codec design?
PCM3008SPWRDL is a functionally similar replacement candidate, but it is not a same-footprint drop-in for PCM3002EG because its package differs. It is appropriate only for a revised PCB after its pinout, digital interface, clocking, control registers, power architecture, and analog performance have been checked. For a board already designed around PCM3002EG, retaining the original device is usually the lowest-risk choice.
Is PCM3002EG the same as PCM3002EG/2K?
PCM3002EG and PCM3002EG/2K identify the same Texas Instruments PCM3002 family device, with the trailing /2K indicating the manufacturer's 2000-piece reel-style order configuration rather than a different codec function. The /2K designation should not be treated as a different pinout or electrical model. Confirm the package marking and ordering information required by the procurement system before placing the order.

Engineering reference data for PCM3002EG — comparison, design guidance, and compliance information.

Selection Guide

Choose PCM3002EG for a stereo audio design that requires two ADC inputs, two DAC outputs, 20-bit resolution, single-ended analog signaling, and software-controlled line output in a 24-pin SSOP footprint. It is a strong choice for a new board whose digital controller supports the required serial-audio clocking and data format. Retain it over redesign options when an existing PCB already follows the PCM3002EG footprint or when changing the package would create avoidable analog-layout risk. PCM3008SPWRDL may be considered for a revised design because one comparison source describes the devices as functionally equivalent, but it is not a drop-in replacement due to its different package. Do not select PCM3002EG merely from resolution alone; verify operating voltage, sampling rate, signal-to-noise ratio, clock requirements, analog range, and host-interface compatibility against the manufacturer datasheet.

Comparison with Alternatives

Parameter This Product
Product Type Low-power stereo audio codec
ADC Count 2
DAC Count 2
Conversion Resolution 20 bit
Digital Audio Interface 20-bit serial interface
Analog Input Type Single-ended
Line Output Control Software controlled
Package 24-pin SSOP
Brand Texas Instruments

Key Differentiators

  • Integrated bidirectional stereo conversion (vs Discrete ADC and DAC approach)
  • Software-controlled line output (vs PCM3008SPWRDL functional comparison candidate)
  • Native 20-bit serial audio path (vs PCM3008SPWRDL functional comparison candidate)

Design Notes

Keep the analog input and output paths short and place required bypass components at the pins specified by the manufacturer reference layout. Route serial data, clock, and control signals away from sensitive analog inputs, and maintain a clear return path for analog ground. Because the PCM3002EG uses a 24-pin SSOP, verify body width, lead pitch, solder-mask clearance, and pad dimensions against the current footprint before releasing artwork.

Confirm the supported master-clock arrangement, serial data format, sample rate, and data timing before connecting a host processor. Use the manufacturer's pin and timing diagrams to establish the relationship between the clock, bit clock, frame signal, and serial data. Do not infer compatibility from the 20-bit resolution label alone, because interface format and timing requirements determine whether the host can communicate reliably with the codec.

Do not treat PCM3002EG/2K as a different functional codec or as an automatically interchangeable stock package. The /2K suffix denotes an order configuration, while the package, pinout, voltage limits, clock requirements, and control behavior remain tied to the PCM3002 family documentation. Before substitution or assembly, compare the package marking, ordering code, tape or reel configuration, and bill-of-materials requirements for the intended production process.

Compliance Information

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Lead Free
Unknown
Halogen Free
Unknown
Conflict Minerals
Unknown

Compliance status requires confirmation from the current manufacturer product page, material declarations, or the applicable quality documentation.

Data verified on: 2026-11-10 — data verified and curated by XAIPART's component engineering team

Related Searches

PCM3002EG datasheet PCM3002EG pinout PCM3002EG datasheet pdf PCM3002EG specifications PCM3002EG 20-bit stereo codec PCM3002EG 24-pin SSOP PCM3002EG audio recording PCM3002EG line output PCM3002EG equivalent PCM3002EG replacement PCM3002EG vs PCM3008SPWRDL PCM3002EG price Texas Instruments PCM3002EG PCM3002EG stock and lead time

Related Components & Terms

Texas Instruments PCM3002EG PCM3002EG/2K PCM3008SPWRDL audio codec audio interface IC stereo codec analog-to-digital converter ADC digital-to-analog converter DAC 20-bit serial audio interface single-ended analog input single-ended analog output software-controlled line output low-power audio conversion 24-pin SSOP SSOP package family surface-mount package digital signal processor audio recording stereo playback RoHS REACH AEC-Q100
Quick Quote RFQ
Fill in complete details — our sales team will respond within 24 hours
Part Number Manufacturer Package QTY Target Price Extended
✓
Quote submitted!

We will respond to your email within 24 hours

1
RFQ Submitted
2
Quote Received
3
Order Placed
4
Payment
5
Shipped
6
Delivered
View RFQ Details