PCM3002EG - 20-Bit Low-Power Stereo Codec | TI
MPN: PCM3002EG ✓ Hoạt độngPCM3002EG Tóm tắt
An audio codec is an integrated circuit that converts analog audio signals into digital data and converts digital audio data back into analog signals. Its role within an audio signal chain is wider than that of a standalone ADC or DAC: the codec integrates conversion circuitry, a digital audio interface, analog input and output channels, and the control functions needed to manage a compact stereo audio path. PCM3002EG belongs to the broader hierarchy of audio codec, interface IC, data converter, and power-management-assisted signal-chain IC.
The PCM3002EG combines 2 ADC channels and 2 DAC channels with 20-bit resolution. Its single-ended analog input architecture supports two stereo input channels, while its two DAC outputs support stereo playback. The line-output stage includes software control, allowing an audio system to manage output behavior through the digital control interface. The low-power designation makes the codec relevant to compact audio equipment where energy efficiency and integration are important.
The PCM3002EG uses a 20-bit serial audio interface, according to the product listing for this exact ordering code. This interface connects the codec to a digital signal processor, microcontroller, application processor, or other audio controller. The 24-pin SSOP package provides a defined PCB footprint while keeping the analog and digital functions in one component. Designers should follow the manufacturer datasheet for the exact clock, format, control, voltage, and de-identification details when laying out the circuit.
Typical applications include digital audio recording, compact stereo playback equipment, audio capture modules, multimedia appliances, and embedded systems that need both microphone or line-level input and line-level output. In a recording path, the two ADC channels digitize left and right analog sources. In a playback path, the two DAC channels reconstruct stereo audio. Software-controlled line output is useful when the system needs configurable output behavior under processor control.
For a new design, verify the codec's supported sample rate, operating voltage, master-clock requirements, analog input range, digital interface format, and pin-level bypass recommendations against the current manufacturer datasheet. These details determine whether the PCM3002EG can be connected directly to the chosen host processor or whether level-shifting, filtering, or additional clock circuitry is required.
This page consolidates the exact PCM3002EG ordering information, manufacturer product resources, technical attributes, verified drop-in comparison requirements, and practical integration guidance. It is designed to help engineers evaluate the 20-bit stereo codec, inspect its SSOP footprint, confirm interface requirements, and plan sourcing through a structured request-for-quote workflow.
Bộ thay thế dễ dàng lắp đặt cho PCM3002EG — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
PCM3002EG/2K
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
PCM3003EG
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
PCM3003EG/2K
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
PCM3002EG Thông số kỹ thuật
| Product Type | Low-power stereo audio codec |
| ADC Resolution | 20 bit |
| DAC Resolution | 20 bit |
| ADC Count | 2 |
| DAC Count | 2 |
| Input Channels | 2 |
| Output Channels | 2 |
| Analog Input Type | Single-ended |
| Analog Output Type | Single-ended |
| Digital Audio Interface | 20-bit serial interface |
| Line Output Control | Software controlled |
| Hộp | 24-pin SSOP |
| Package Type | SSOP |
| Số chân | 24 pins |
| Kiểu lắp đặt | Surface mount |
| Packaging Form | Tube |
Hướng dẫn cấu hình chân PCM3002EG ssop
Cấu hình chân cho PCM3002EG (ssop gói). Số thứ tự chân, chức năng và sơ đồ kết nối được xác định trong tài liệu thông số kỹ thuật của nhà sản xuất. Tham khảo nó để biết footprint và hướng dẫn hàn chính xác.
Không có dữ liệu chân cụ thể sẵn có cho PCM3002EG.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
PCM3002EG phù hợp cho 6 Áp dụngs: Stereo Digital Audio Recording, Compact Stereo Playback Equipment, Audio Capture Module, Multimedia Terminal Audio Interface, Embedded Audio Control System, Line-Level Audio Interface.
Stereo Digital Audio Recording
The PCM3002EG fits a two-channel recording front end because it combines 2 single-ended ADCs with 20-bit resolution and a 20-bit serial interface. Left and right analog sources can be digitized and passed to a digital signal processor, microcontroller, or audio controller without adding separate converter packages. The integrated codec also provides 2 DAC channels for monitoring or immediate playback. Before finalizing the circuit, verify the supported sampling rate, analog input range, required master clock, and bypass network against the manufacturer datasheet. Proper grounding and short, quiet analog traces remain essential because the codec resolves 20-bit audio only when the surrounding front end does not add unacceptable noise or distortion.
Được đề xuất
Compact Stereo Playback Equipment
PCM3002EG is suitable for compact stereo playback equipment requiring both digital-to-analog conversion and optional audio input support. Its 2 DAC channels produce left and right analog outputs, while software-controlled line output allows the host controller to manage output behavior digitally. In a playback appliance, the codec can sit between a digital audio source and line-level output stages, reducing the number of discrete converter packages. The 24-pin SSOP package supports conventional surface-mount assembly, although its footprint dimensions and pin-clearance rules must be checked before layout. Validate the digital audio format, clocking arrangement, output loading, and analog filtering requirements before release to production.
Được đề xuất
Audio Capture Module
The PCM3002EG can form the core of a stereo audio capture module because it provides two single-ended ADC channels, two DAC channels, and a 20-bit serial data interface in one IC. A host processor can receive digital samples from left and right line-level sources while using the DAC outputs for local monitoring. This integration is useful where component count and PCB area matter, but it does not remove the need for input conditioning, grounding, reference design, and clock generation. Check the supported sampling frequencies and analog dynamic range in the Texas Instruments PCM3002 documentation, then confirm that the module's connector, coupling capacitors, and ground strategy preserve signal integrity.
Được đề xuất
Multimedia Terminal Audio Interface
PCM3002EG is appropriate for multimedia terminals that need a bidirectional stereo audio path around a digital processor. The processor can stream serial audio to the codec for playback and receive converted samples from analog input sources during capture. Because the device includes 2 ADCs and 2 DACs, a two-channel implementation can avoid separate stereo converter ICs. Its software-controlled line output also supports processor-managed mute, level, or operating-mode decisions when supported by the control interface. The design must still confirm electrical interface levels, supported data formats, sample-rate handling, and power sequencing in the datasheet. Layout should isolate sensitive analog returns from digital clock and serial-data paths.
Được đề xuất
Embedded Audio Control System
The PCM3002EG can serve as the audio conversion element in an embedded control system with digital signal processing, monitoring, or communication functions. Its 20-bit serial interface provides a direct path to a digital controller, while the 2 ADC channels support feedback or sensor-derived audio and the 2 DAC channels support command prompts or local monitoring. The low-power stereo codec designation is attractive for compact embedded equipment, but actual system power depends on supply voltage, sample rate, clocking, and external circuitry. Use the manufacturer datasheet to confirm operating limits and pin functions, and design the analog section to use the specified reference and bypass components.
Được đề xuất
Line-Level Audio Interface
PCM3002EG is suited to line-level stereo interface designs because it accepts single-ended analog inputs and provides single-ended analog outputs with software-controlled line-output behavior. Two input channels and two output channels support standard left/right audio routing while keeping the data-conversion block in one package. The 24-pin SSOP form factor requires attention to analog-pin placement and exposed routing on the PCB, but it avoids the footprint area of multiple converter components. Exact line-input amplitude, output load, bandwidth, distortion, and channel-separation requirements must be verified in the datasheet. A prototype should also confirm that the host's clock and serial interface configuration produces valid data at the intended sample rate.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho PCM3002EG — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này |
|---|---|
| Product Type | Low-power stereo audio codec |
| ADC Count | 2 |
| DAC Count | 2 |
| Conversion Resolution | 20 bit |
| Digital Audio Interface | 20-bit serial interface |
| Analog Input Type | Single-ended |
| Line Output Control | Software controlled |
| Package | 24-pin SSOP |
| Brand | Texas Instruments |
Bảo phân biệt quan trọng
- Integrated bidirectional stereo conversion (vsDiscrete ADC and DAC approach)
- Software-controlled line output (vsPCM3008SPWRDL functional comparison candidate)
- Native 20-bit serial audio path (vsPCM3008SPWRDL functional comparison candidate)
Ghi chú thiết kế
Keep the analog input and output paths short and place required bypass components at the pins specified by the manufacturer reference layout. Route serial data, clock, and control signals away from sensitive analog inputs, and maintain a clear return path for analog ground. Because the PCM3002EG uses a 24-pin SSOP, verify body width, lead pitch, solder-mask clearance, and pad dimensions against the current footprint before releasing artwork.
Confirm the supported master-clock arrangement, serial data format, sample rate, and data timing before connecting a host processor. Use the manufacturer's pin and timing diagrams to establish the relationship between the clock, bit clock, frame signal, and serial data. Do not infer compatibility from the 20-bit resolution label alone, because interface format and timing requirements determine whether the host can communicate reliably with the codec.
Do not treat PCM3002EG/2K as a different functional codec or as an automatically interchangeable stock package. The /2K suffix denotes an order configuration, while the package, pinout, voltage limits, clock requirements, and control behavior remain tied to the PCM3002 family documentation. Before substitution or assembly, compare the package marking, ordering code, tape or reel configuration, and bill-of-materials requirements for the intended production process.
Thông tin tuân thủ
Compliance status requires confirmation from the current manufacturer product page, material declarations, or the applicable quality documentation.