PCM3002EG - 20-Bit Low-Power Stereo Codec | TI
MPN: PCM3002EG ✓ 啟用中PCM3002EG 概覽
An audio codec is an integrated circuit that converts analog audio signals into digital data and converts digital audio data back into analog signals. Its role within an audio signal chain is wider than that of a standalone ADC or DAC: the codec integrates conversion circuitry, a digital audio interface, analog input and output channels, and the control functions needed to manage a compact stereo audio path. PCM3002EG belongs to the broader hierarchy of audio codec, interface IC, data converter, and power-management-assisted signal-chain IC.
The PCM3002EG combines 2 ADC channels and 2 DAC channels with 20-bit resolution. Its single-ended analog input architecture supports two stereo input channels, while its two DAC outputs support stereo playback. The line-output stage includes software control, allowing an audio system to manage output behavior through the digital control interface. The low-power designation makes the codec relevant to compact audio equipment where energy efficiency and integration are important.
The PCM3002EG uses a 20-bit serial audio interface, according to the product listing for this exact ordering code. This interface connects the codec to a digital signal processor, microcontroller, application processor, or other audio controller. The 24-pin SSOP package provides a defined PCB footprint while keeping the analog and digital functions in one component. Designers should follow the manufacturer datasheet for the exact clock, format, control, voltage, and de-identification details when laying out the circuit.
Typical applications include digital audio recording, compact stereo playback equipment, audio capture modules, multimedia appliances, and embedded systems that need both microphone or line-level input and line-level output. In a recording path, the two ADC channels digitize left and right analog sources. In a playback path, the two DAC channels reconstruct stereo audio. Software-controlled line output is useful when the system needs configurable output behavior under processor control.
For a new design, verify the codec's supported sample rate, operating voltage, master-clock requirements, analog input range, digital interface format, and pin-level bypass recommendations against the current manufacturer datasheet. These details determine whether the PCM3002EG can be connected directly to the chosen host processor or whether level-shifting, filtering, or additional clock circuitry is required.
This page consolidates the exact PCM3002EG ordering information, manufacturer product resources, technical attributes, verified drop-in comparison requirements, and practical integration guidance. It is designed to help engineers evaluate the 20-bit stereo codec, inspect its SSOP footprint, confirm interface requirements, and plan sourcing through a structured request-for-quote workflow.
直接替換替代品,適用於 PCM3002EG — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
PCM3002EG/2K
✅ 直接替換📋 參考替代品(不在目錄中)
PCM3003EG
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
PCM3003EG/2K
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
PCM3002EG 規格
| Product Type | Low-power stereo audio codec |
| ADC Resolution | 20 bit |
| DAC Resolution | 20 bit |
| ADC Count | 2 |
| DAC Count | 2 |
| Input Channels | 2 |
| Output Channels | 2 |
| Analog Input Type | Single-ended |
| Analog Output Type | Single-ended |
| Digital Audio Interface | 20-bit serial interface |
| Line Output Control | Software controlled |
| 封裝 | 24-pin SSOP |
| Package Type | SSOP |
| 腳位數 | 24 pins |
| 安裝類型 | Surface mount |
| Packaging Form | Tube |
PCM3002EG ssop 腳位配置指南
PCM3002EG(ssop 封裝)的腳位配置。 腳位編號、功能與連接圖定義於製造商資料手冊中。請參閱該手冊以取得確切的封裝尺寸與焊接指引。
無詳細腳位定義資料: PCM3002EG.
請參閱 資料表 以查看完整腳位配置。
典型應用
PCM3002EG 適用於 6 應用s: Stereo Digital Audio Recording, Compact Stereo Playback Equipment, Audio Capture Module, Multimedia Terminal Audio Interface, Embedded Audio Control System, Line-Level Audio Interface.
Stereo Digital Audio Recording
The PCM3002EG fits a two-channel recording front end because it combines 2 single-ended ADCs with 20-bit resolution and a 20-bit serial interface. Left and right analog sources can be digitized and passed to a digital signal processor, microcontroller, or audio controller without adding separate converter packages. The integrated codec also provides 2 DAC channels for monitoring or immediate playback. Before finalizing the circuit, verify the supported sampling rate, analog input range, required master clock, and bypass network against the manufacturer datasheet. Proper grounding and short, quiet analog traces remain essential because the codec resolves 20-bit audio only when the surrounding front end does not add unacceptable noise or distortion.
推薦
Compact Stereo Playback Equipment
PCM3002EG is suitable for compact stereo playback equipment requiring both digital-to-analog conversion and optional audio input support. Its 2 DAC channels produce left and right analog outputs, while software-controlled line output allows the host controller to manage output behavior digitally. In a playback appliance, the codec can sit between a digital audio source and line-level output stages, reducing the number of discrete converter packages. The 24-pin SSOP package supports conventional surface-mount assembly, although its footprint dimensions and pin-clearance rules must be checked before layout. Validate the digital audio format, clocking arrangement, output loading, and analog filtering requirements before release to production.
推薦
Audio Capture Module
The PCM3002EG can form the core of a stereo audio capture module because it provides two single-ended ADC channels, two DAC channels, and a 20-bit serial data interface in one IC. A host processor can receive digital samples from left and right line-level sources while using the DAC outputs for local monitoring. This integration is useful where component count and PCB area matter, but it does not remove the need for input conditioning, grounding, reference design, and clock generation. Check the supported sampling frequencies and analog dynamic range in the Texas Instruments PCM3002 documentation, then confirm that the module's connector, coupling capacitors, and ground strategy preserve signal integrity.
推薦
Multimedia Terminal Audio Interface
PCM3002EG is appropriate for multimedia terminals that need a bidirectional stereo audio path around a digital processor. The processor can stream serial audio to the codec for playback and receive converted samples from analog input sources during capture. Because the device includes 2 ADCs and 2 DACs, a two-channel implementation can avoid separate stereo converter ICs. Its software-controlled line output also supports processor-managed mute, level, or operating-mode decisions when supported by the control interface. The design must still confirm electrical interface levels, supported data formats, sample-rate handling, and power sequencing in the datasheet. Layout should isolate sensitive analog returns from digital clock and serial-data paths.
推薦
Embedded Audio Control System
The PCM3002EG can serve as the audio conversion element in an embedded control system with digital signal processing, monitoring, or communication functions. Its 20-bit serial interface provides a direct path to a digital controller, while the 2 ADC channels support feedback or sensor-derived audio and the 2 DAC channels support command prompts or local monitoring. The low-power stereo codec designation is attractive for compact embedded equipment, but actual system power depends on supply voltage, sample rate, clocking, and external circuitry. Use the manufacturer datasheet to confirm operating limits and pin functions, and design the analog section to use the specified reference and bypass components.
推薦
Line-Level Audio Interface
PCM3002EG is suited to line-level stereo interface designs because it accepts single-ended analog inputs and provides single-ended analog outputs with software-controlled line-output behavior. Two input channels and two output channels support standard left/right audio routing while keeping the data-conversion block in one package. The 24-pin SSOP form factor requires attention to analog-pin placement and exposed routing on the PCB, but it avoids the footprint area of multiple converter components. Exact line-input amplitude, output load, bandwidth, distortion, and channel-separation requirements must be verified in the datasheet. A prototype should also confirm that the host's clock and serial interface configuration produces valid data at the intended sample rate.
推薦
推薦產品摘要
工程參考資料,適用於 PCM3002EG — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 |
|---|---|
| Product Type | Low-power stereo audio codec |
| ADC Count | 2 |
| DAC Count | 2 |
| Conversion Resolution | 20 bit |
| Digital Audio Interface | 20-bit serial interface |
| Analog Input Type | Single-ended |
| Line Output Control | Software controlled |
| Package | 24-pin SSOP |
| Brand | Texas Instruments |
主要差異化特點
- Integrated bidirectional stereo conversion (對比Discrete ADC and DAC approach)
- Software-controlled line output (對比PCM3008SPWRDL functional comparison candidate)
- Native 20-bit serial audio path (對比PCM3008SPWRDL functional comparison candidate)
設計說明
Keep the analog input and output paths short and place required bypass components at the pins specified by the manufacturer reference layout. Route serial data, clock, and control signals away from sensitive analog inputs, and maintain a clear return path for analog ground. Because the PCM3002EG uses a 24-pin SSOP, verify body width, lead pitch, solder-mask clearance, and pad dimensions against the current footprint before releasing artwork.
Confirm the supported master-clock arrangement, serial data format, sample rate, and data timing before connecting a host processor. Use the manufacturer's pin and timing diagrams to establish the relationship between the clock, bit clock, frame signal, and serial data. Do not infer compatibility from the 20-bit resolution label alone, because interface format and timing requirements determine whether the host can communicate reliably with the codec.
Do not treat PCM3002EG/2K as a different functional codec or as an automatically interchangeable stock package. The /2K suffix denotes an order configuration, while the package, pinout, voltage limits, clock requirements, and control behavior remain tied to the PCM3002 family documentation. Before substitution or assembly, compare the package marking, ordering code, tape or reel configuration, and bill-of-materials requirements for the intended production process.
合規資訊
Compliance status requires confirmation from the current manufacturer product page, material declarations, or the applicable quality documentation.