Broadcom

PEX8615-BA50BC - 12-Lane Gen2 PCIe Switch | Broadcom

MPN: PEX8615-BA50BC ✗ End of Life
1.0 V Vdss 324-HSBGA (19 x 19 mm) Package
MOQ: 1 |

PEX8615-BA50BC Overview

Broadcom PEX8615-BA50BC is a 12-lane, 12-port PCI Express Gen2 switch with DMA in a 324-HSBGA 19 x 19 mm package. It operates from a 1.0 V core supply and supports PCIe hot-plug, power management, Quality of Service, and traffic management functions.

A PCI Express switch is a semiconductor device that connects a PCIe host or upstream endpoint to multiple downstream endpoints while dividing available lane bandwidth among connected devices. The PEX8615 belongs to the PCIe switch hierarchy: PCI Express interface IC, fabric switch, interface controller, and semiconductor. Its multiport architecture consolidates expansion traffic into a single host interface, reducing the number of independent adapters required in systems with several PCIe devices.

The defining characteristics of the PEX8615-BA50BC are its 12-lane Gen2 capability, 12 downstream ports, integrated DMA, and 1.0 V core voltage. Gen2 operation corresponds to a maximum PCIe data rate of 5 GT/s per lane. The broad feature set also includes hot-plug support and configurable power management, which are important in workstation, server, storage, and embedded systems where devices may be added, removed, or placed into reduced-power states.

At the architecture level, the switch provides a central PCIe routing point and supports Quality of Service and traffic management to help control data movement among endpoints. These functions are particularly useful when several devices access shared upstream bandwidth. The DMA function can transfer data without requiring every transfer to pass through a host processor, making the switch applicable to systems that need high-throughput I/O consolidation and controlled data flow.

Typical uses include multi-Gigabit network adapters, RAID and storage controllers, accelerator cards, capture equipment, and industrial PCIe expansion systems. The 324-HSBGA package provides the dense interconnect required by a 12-lane, 12-port switching fabric. Because the package and signal interface are complex, layout, power delivery, reference clocking, and connector-side signal integrity require careful validation against the manufacturer datasheet.

Designers should preserve the required PCIe lane and reference-clock topology, provide clean 1.0 V core power, and observe all package-ball, decoupling, and thermal requirements. The PEX8615-BA50BC is listed as obsolete in a distributor result, so new production designs should confirm lifecycle status and obtain the latest manufacturer documentation before committing the part to an active design.

This product summary combines the verified PCIe switch characteristics, package details, lifecycle information, and technical replacement guidance into an engineering-focused resource for architecture selection, PCB planning, sourcing review, and legacy-system maintenance.

Drop-in alternatives for PEX8615-BA50BC — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.

No drop-in alternatives available for this product.

Request Alternatives

PEX8615-BA50BC Maximum Ratings & Electrical Characteristics

Product Type PCI Express Switch IC
PCIe Generation Gen2
Maximum Data Rate 5 GT/s per lane
Lane Count 12 lanes
Port Count 12 ports
DMA Support Yes
Core Voltage 1.0 V
Package 324-HSBGA (19 x 19 mm)
Ball Count 324 balls
Mounting Type Surface Mount
Hot-Plug Support Yes
Power Management Supported
Quality of Service Supported
Traffic Management Supported

PEX8615-BA50BC 324-hsbga (19 x 19 mm) Pin Configuration Guide

Pin configuration for PEX8615-BA50BC (324-hsbga (19 x 19 mm) package). This analog component features input, output, and power supply pins. Refer to the manufacturer datasheet for offset null, compensation, and enable pin configurations. Ideal for signal conditioning and amplifier circuits.

324-hsbga (19 x 19 mm) package pinout diagram for PEX8615-BA50BC

No detailed pinout data available for PEX8615-BA50BC.

Refer to the datasheet for full pin configuration.

Typical Applications

PEX8615-BA50BC is suitable for 6 applications: PCIe Network Adapter Consolidation, Storage Controller Expansion, Industrial PCIe Expansion, Test and Measurement Systems, Machine Vision Acceleration, Server PCIe Device Pooling.

🌐

PCIe Network Adapter Consolidation

The PEX8615-BA50BC fits systems that need to consolidate multiple PCI Express adapters behind a single Gen2 switching path. Its 12 lanes and 12 ports provide a scalable fabric for Ethernet, storage, and acceleration devices, while DMA supports direct high-throughput data movement. In a multi-NIC appliance, controlled traffic management and Quality of Service can help prevent one endpoint from dominating shared uplink bandwidth. The 1.0 V core architecture requires a carefully designed power tree and low-noise reference distribution. Because the device is obsolete, it is most appropriate for expansion of an existing PEX8615-based platform or qualified legacy maintenance rather than a new platform without lifecycle review.

🖥️

Storage Controller Expansion

The PEX8615-BA50BC is suitable for storage appliances that require several PCIe endpoints, including RAID, cache, and direct-attached storage controllers. Twelve PCIe lanes shared across 12 ports can consolidate controller traffic while DMA handles high-volume transfers without requiring every packet to traverse host software. Gen2 operation provides a maximum 5 GT/s per lane before protocol overhead, making workload sizing and lane allocation important. The switch's traffic-management and Quality-of-Service features help separate latency-sensitive commands from bulk transfers. Firmware, topology, and endpoint-support compatibility must be validated against the manufacturer documentation before deployment, especially because the PEX8615-BA50BC is obsolete.

🏭

Industrial PCIe Expansion

The PEX8615-BA50BC can serve as the central switch in industrial systems that add PCIe communication, motion, vision, or acquisition cards to a host platform. Its 12-lane, 12-port Gen2 structure allows multiple endpoint types to share a common fabric, while hot-plug support can assist systems designed for serviceable expansion. Traffic management provides a mechanism for maintaining predictable behavior when production cells generate simultaneous data streams. Thermal and signal-integrity planning are critical because a 19 x 19 mm 324-HSBGA concentrates complex routing and supply requirements into a compact area. For new industrial programs, verify lifecycle status and confirm whether a current switch offers better long-term sourcing support.

🔧

Test and Measurement Systems

The PEX8615-BA50BC is applicable to modular test and measurement platforms requiring multiple PCI Express instruments, digitizers, or FPGA-based acquisition cards. Its 12 ports allow a host to access several endpoints through one switching fabric, while DMA and traffic management support efficient transfer of large sample blocks. The device can reduce duplicated host-adapter hardware when instrument modules share compatible drivers and operating-system software. Reference-clock distribution, lane equalization, and connector transitions require careful validation in high-speed test equipment. The obsolete designation means system extensions should use an already qualified PEX8615 design unless a complete engineering replacement has been verified.

🎥

Machine Vision Acceleration

The PEX8615-BA50BC can support machine-vision computers that combine frame grabbers, image-processing accelerators, storage, and network interfaces over PCI Express. Twelve Gen2 lanes and 12 ports offer enough fabric capacity for multiple devices, while DMA and traffic management can keep high-volume image data moving predictably. The switch is most appropriate when retaining an existing industrial platform because PCIe camera drivers, FPGA firmware, and operating-system support must remain compatible with the switch topology. Careful lane-to-port assignment and buffer sizing are necessary to prevent high-bandwidth imaging traffic from delaying control traffic. Confirm obsolete-part availability and inspect incoming components rigorously for long-term maintenance programs.

🖥️

Server PCIe Device Pooling

The PEX8615-BA50BC is relevant to legacy server designs that pool PCIe devices behind a single host-facing fabric. Its 12 lanes and 12 ports can support a mix of storage, networking, and accelerator endpoints, while DMA reduces host processor intervention during data movement. Quality of Service and traffic management are useful in shared servers where multiple tenants or devices require controlled access to upstream bandwidth. Integration must account for the switch's 1.0 V core supply, reference-clock architecture, endpoint ordering, and platform firmware. Given the obsolete lifecycle designation, engineers should compare the existing platform's validation history with current switch options before using the part in additional server configurations.

What is the PEX8615-BA50BC?
The PEX8615-BA50BC is a Broadcom 12-lane, 12-port PCI Express Gen2 switch with DMA, hot-plug support, power management, Quality of Service, and traffic management. According to the manufacturer datasheet, it is designed to consolidate multiple PCIe endpoints behind a switching fabric. The device uses a 1.0 V core supply and is packaged in a 324-HSBGA measuring 19 x 19 mm.
How many PCIe lanes and ports does PEX8615-BA50BC support?
The PEX8615-BA50BC supports 12 PCIe lanes and 12 ports. Its Gen2 interface operates at up to 5 GT/s per lane, while the integrated DMA provides a dedicated path for data movement between devices connected through the switch. The manufacturer datasheet identifies this part as a flexible and versatile 12-lane, 12-port PCI Express switch for systems requiring multiport I/O consolidation.
Where can I download the PEX8615-BA50BC datasheet PDF?
The PEX8615-BA50BC datasheet PDF is available through the linked document page for the PLX PEX8615-BA50BC. The underlying PEX8615 documentation is also indexed on the AVAGO TECHNOLOGIES datasheet page. For new design work, use the Broadcom document for final electrical characteristics, package-ball assignments, reference design guidance, and errata before releasing the PCB.
Where can I find the PEX8615-BA50BC pinout and package-ball assignments?
The PEX8615-BA50BC pin information is contained in the package-ball table and pin-description sections of the manufacturer datasheet. The device uses a 324-HSBGA package, so its 324-ball assignment must be read directly from that document rather than inferred from a generic BGA drawing. Use the ball-map table to assign PCIe lanes, power, ground, reference clocks, configuration signals, and control signals.
Is the PEX8615-BA50BC currently active?
The PEX8615-BA50BC is listed as obsolete in a distributor product result. This means new production use is not appropriate without an explicit manufacturer or authorized supply-chain confirmation. The part may still be relevant for repairing or maintaining previously deployed equipment, but lifecycle review, traceability, counterfeit screening, and long-term availability planning are required for legacy support.
Where can I buy PEX8615-BA50BC online?
Use the Request a Quote form on this page to request PEX8615-BA50BC availability, traceability, and an order quotation. The component is listed as obsolete, so availability can vary substantially by lot and condition. Provide the required package suffix and any acceptable substitute or refurbishment requirements with the request to help procurement confirm the exact configuration.
What is the price of PEX8615-BA50BC?
Current pricing for the obsolete PEX8615-BA50BC is best obtained through the Request a Quote form on this page. Pricing may vary with lot traceability, package suffix, condition, quantity, and inspection requirements. Because lifecycle status affects availability and counterfeit risk, the quotation should specify whether the requirement is for new factory-sealed stock, an authorized source, or a formally documented legacy part.
What is the lead time for PEX8615-BA50BC?
The current lead time for PEX8615-BA50BC should be confirmed through the Request a Quote form on this page. As an obsolete switching IC, its lead time depends on remaining factory inventory, lot traceability, and whether an authorized supply channel can accept additional business. Procurement should request the committed delivery date, originating lot information, and inspection documentation with the quotation.
Is PEX8615-BA50BC in stock?
Stock status must be checked for the exact package suffix through the Request a Quote form on this page. The PEX8615-BA50BC is listed as obsolete, so a distributor listing does not necessarily mean factory-sealed inventory is immediately available. Ask the supplier to confirm lot date, traceability, sealed packaging, and any testing or inspection coverage before accepting delivery.
What can replace PEX8615-BA50BC?
No drop-in replacement for the PEX8615-BA50BC can be confirmed from the available cross-reference results. A device must match the 324-HSBGA footprint, 12-lane and 12-port Gen2 architecture, signal assignments, power requirements, firmware behavior, and system configuration before it can be treated as a true drop-in part. Request engineering review of any candidate rather than relying only on a distributor similarity label.
Is PEX8615-BA50BC the same as PEX8615-BA50BI G?
The PEX8615-BA50BC and PEX8615-BA50BI G listings both identify a 12-channel PCI Express switch in a 324-HSBGA 19 x 19 mm package, but that information alone does not prove pin-to-pin equivalence. The suffix can represent ordering, temperature, lead-finish, or other option differences. Compare the complete ball map, electrical limits, and ordering information before treating one as a replacement for the other.
Can PEX8619 replace PEX8615-BA50BC?
A PEX8619 cannot be assumed to replace the PEX8615-BA50BC merely because both are PCI Express switches. The available discussion concerns a PEX8619-BA50BI G as a proposed pin-for-pin replacement for a PEX8615-BA50BI G, and it does not establish compatibility with the BC suffix. Validate the exact footprint, lane assignment, power design, port configuration, and device firmware against the manufacturer documentation.
PEX8615-BA50BC vs PEX8615-BA50BI G: which should I choose?
Choose PEX8615-BA50BC when it matches the exact configuration, package suffix, and qualification requirements of the original design; choose PEX8615-BA50BI G only after confirming that its ordering code and datasheet define an electrically and mechanically interchangeable part. Both are listed as 12-channel switches in 324-HSBGA packages, but suffix-level compatibility requires the manufacturer package drawing, pin table, and device-status information.
What are the key specifications of PEX8615-BA50BC that engineers should know?
The PEX8615-BA50BC combines 12 PCIe lanes, 12 ports, Gen2 operation at up to 5 GT/s per lane, and integrated DMA in a 324-HSBGA 19 x 19 mm package. The manufacturer datasheet also identifies a 1.0 V core supply, hot-plug support, power management, Quality of Service, and traffic management. These parameters define its role as a dense PCIe fabric switch for multi-device systems.
When should I choose PEX8615-BA50BC over another PCIe switch?
Choose the PEX8615-BA50BC for legacy or maintenance systems specifically designed around its 12-lane, 12-port Gen2 architecture, 1.0 V core supply, and 324-HSBGA footprint. A different PCIe switch should be selected when it offers the required lane count, port configuration, media, power architecture, device support, and software compatibility without forcing a board redesign. Its obsolete lifecycle makes replacement-product evaluation more important than nominal feature matching.

Engineering reference data for PEX8615-BA50BC — comparison, design guidance, and compliance information.

Selection Guide

Choose the PEX8615-BA50BC only when the existing platform specifically requires the Broadcom PEX8615 12-lane, 12-port Gen2 switching architecture, 1.0 V core supply, and verified 324-HSBGA ball map. It remains useful for repairing or extending qualified legacy systems, but its obsolete status makes lifecycle and counterfeit risk decisive constraints. Do not treat PEX8615-BA50BI G as an automatic substitute merely because both listings use a 324-HSBGA package; confirm suffix-specific ordering and electrical data. Likewise, PEX8619-BA50BI G may require engineering review rather than a simple board swap. For a new product, compare current PCIe switches by lane and port topology, media compatibility, power architecture, device support, firmware, and lifecycle assurance, and treat any board change as a redesign unless pin and behavioral compatibility are formally demonstrated.

Comparison with Alternatives

Parameter This Product
Brand Broadcom
Package 324-HSBGA (19 x 19 mm)
PCIe Generation Gen2
Lane Count 12 lanes
Port Count 12 ports
Maximum Data Rate 5 GT/s per lane
Core Voltage 1.0 V
DMA Support Yes
Hot-Plug Support Yes
Lifecycle Status Obsolete

Key Differentiators

  • High-density 12-port PCIe switching fabric (vs PEX8615-BA50BI G)
  • Integrated DMA and traffic-management capability (vs PEX8619-BA50BI G)
  • Purpose-built 19 x 19 mm 324-ball HSBGA integration (vs PEX8615-BA50BI G)

Design Notes

Treat the 324-HSBGA as a complete high-speed design constraint rather than a conventional two-row IC. Assign the PCIe lanes, reference clocks, auxiliary signals, and low-voltage core power according to the manufacturer ball map and reference design. Keep high-speed differential routes continuously referenced to an uninterrupted ground plane, avoid plane splits beneath the switching fabric, and control connector and retimer transitions using the manufacturer's length and impedance guidance.

Build the 1.0 V core supply as a dedicated, low-impedance power tree and decouple each supply domain at the device pins according to the manufacturer recommendations. Use the datasheet's specified capacitor types, voltage ratings, effective capacitance, and placement. Validate startup current, droop, sequencing, and steady-state current across the intended port population. If a regenerated clock or multiple reference domains are used, verify their amplitude, jitter, and routing independently from the data rails.

PCIe Gen2 signaling operates at up to 5 GT/s, so channel loss, reflections, crosstalk, and clock jitter must be checked across the complete board-to-board and board-to-device path. Follow the manufacturer reference design for layer transitions, via geometry, return vias, and test points. Do not substitute generic length-matching rules for the documented topology. Validate the assembled board with eye and compliance measurements before attaching expensive external PCIe equipment.

Do not treat a similar Broadcom switch suffix as a guaranteed replacement. The PEX8615-BA50BI G has the same stated 324-HSBGA format, but the available information does not establish a complete pin-for-pin match for the BC suffix. Likewise, the PEX8619 requires architecture, electrical, firmware, and footprint review before substitution. For an obsolete device, require exact ordering-code traceability and lot documentation, and plan for inspection because counterfeit or remarked components are a significant sourcing risk.

Compliance Information

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Lead Free
Unknown
Halogen Free
Unknown
Conflict Minerals
Unknown

No definitive compliance statements were identified for this exact part and package suffix.

Data verified on: 2026-11-11 — data verified and curated by XAIPART's component engineering team

Related Searches

PEX8615-BA50BC datasheet PEX8615-BA50BC datasheet pdf PEX8615-BA50BC pinout PEX8615-BA50BC specifications Broadcom PEX8615-BA50BC PEX8615-BA50BC equivalent PEX8615-BA50BC replacement PEX8615-BA50BC cross reference PEX8615-BA50BC price PEX8615-BA50BC stock PEX8615 12 lane 12 port switch PEX8615 324 HSBGA pinout

Related Components & Terms

Broadcom PEX8615-BA50BC PEX8615-BA50BI G PEX8619-BA50BI G PCI Express switch PCIe Gen2 PCIe fabric interface IC semiconductor 12-lane switch 12-port switch DMA Quality of Service traffic management hot-plug power management 1.0 V core voltage 5 GT/s per lane 324-HSBGA 19 x 19 mm package surface mount BGA package legacy system maintenance PCIe endpoint network adapter storage controller
Quick Quote RFQ
Fill in complete details — our sales team will respond within 24 hours
Part Number Manufacturer Package QTY Target Price Extended
✓
Quote submitted!

We will respond to your email within 24 hours

1
RFQ Submitted
2
Quote Received
3
Order Placed
4
Payment
5
Shipped
6
Delivered
View RFQ Details