PEX8648-BB50RBCG - 48-Lane PCIe Gen2 Switch | Broadcom
MPN: PEX8648-BB50RBCG ✓ ActivePEX8648-BB50RBCG Overview
A PCI Express switch is a multiport semiconductor that routes PCI Express transaction, data, and control traffic between a host or upstream port and multiple downstream endpoints. Within the PCIe hierarchy, this device belongs to the switching and interface-device category, where lane multiplexing allows a constrained host interface to serve numerous peripherals without assigning a dedicated root port to each one.
The principal specifications are 48 PCIe lanes, 12 ports, a 5.0 GT/s PCIe Gen 2 data rate, and a 676-FCBGA package with a 27 mm by 27 mm body. The reported RoHS status supports use in modern electronics manufacturing, while the Broadcom technical document covers the AA, AB, and BB silicon revisions of the PEX 8648 family. Exact electrical limits, reference clocking, power domains, and operating-temperature details should be selected from the manufacturer data book.
The PEX 8648 architecture is suited to consolidating PCI Express connectivity in embedded computers, industrial controllers, network appliances, storage systems, and test equipment. Forty-eight lanes provide substantial downstream bandwidth at 5.0 GT/s per lane, while 12 ports allow more endpoint fan-out than a conventional root-complex-only design. Designers should preserve the exact reference-design ball assignments, power architecture, and connector requirements when translating the device into a PCB layout.
This page distinguishes the ordering code, package, lane count, port count, and PCIe generation from superficially similar Broadcom variants. It also organizes replacement guidance around genuine FCBGA-676 pin-compatible options rather than functional PCIe switches that require a different footprint. Compatibility must include the correct ball map, lane assignments, clocking, auxiliary power, and system firmware configuration.
For new layouts, follow the Broadcom PEX 8648 data book for differential routing, reference-plane transitions, power distribution, decoupling, reset behavior, and connector reach-through. A small BGA with hundreds of signal balls requires disciplined escape routing and through-hole vias beneath the device where the package design permits them. Confirm the exact ordering code before releasing a long-lead procurement order.
The information here synthesizes the confirmed 48-lane, 12-port, 5.0 GT/s architecture with package-level replacement analysis and implementation guidance. It helps engineers distinguish orderable suffixes, assess board-level reuse, and identify the electrical and mechanical checks required before treating a candidate as a true drop-in replacement.
Drop-in alternatives for PEX8648-BB50RBCG — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.
PEX8648-BB50RBC-F
✅ Drop-In📋 Reference alternative (not in catalog)
PEX8648-BB50RBI-G
✅ Drop-In📋 Reference alternative (not in catalog)
PEX8648-BB50BC
✅ Drop-In📋 Reference alternative (not in catalog)
PEX8648-BB50BI-F
✅ Drop-In📋 Reference alternative (not in catalog)
PEX8648-BB50RBCG Maximum Ratings & Electrical Characteristics
| Product Type | PCI Express switch IC |
| PCI Express Generation | Gen 2 |
| Maximum Data Rate | 5.0 GT/s per lane |
| Total Lane Count | 48 lanes |
| Port Count | 12 ports |
| Package | FCBGA-676 |
| Package Body Size | 27 mm x 27 mm |
| Ball Count | 676 balls |
| Mounting Type | Surface mount |
| Silicon Family | PEX 8648 |
| Documented Silicon Revisions | AA, AB, and BB |
| RoHS Status | Compliant |
PEX8648-BB50RBCG 27 mm x 27 mm Pin Configuration Guide
Pin configuration for PEX8648-BB50RBCG (27 mm x 27 mm package). This analog component features input, output, and power supply pins. Refer to the manufacturer datasheet for offset null, compensation, and enable pin configurations. Ideal for signal conditioning and amplifier circuits.
No detailed pinout data available for PEX8648-BB50RBCG.
Refer to the datasheet for full pin configuration.
Typical Applications
PEX8648-BB50RBCG is suitable for 6 applications: Industrial PCI Express Expansion, PCIe Storage Consolidation, Network Appliance Port Expansion, Embedded Test and Measurement System, Embedded Computer Platform, PCIe Security and Acceleration Appliance.
Industrial PCI Express Expansion
The PEX8648-BB50RBCG fits industrial controllers that must connect multiple PCI Express peripherals to a host processor with limited native root ports. Its 48 lanes and 12 ports provide substantial downstream fan-out while retaining PCI Express Gen 2 operation at 5.0 GT/s per lane. The switch can isolate traffic among storage, network, acquisition, and control peripherals while preserving a centralized host interface. Implementation should follow the Broadcom reference design for the 676-ball FCBGA, especially for power sequencing, clock distribution, differential routing, and auxiliary signal conditioning. Validate the exact ordering code against the required industrial temperature and qualification profile before releasing the equipment for field deployment.
Recommended
PCIe Storage Consolidation
The PEX8648-BB50RBCG is well suited to storage appliances in which several PCIe SSDs, RAID controllers, or accelerator cards share a host connection. Forty-eight lanes at 5.0 GT/s per lane provide more downstream bandwidth than a low-lane-count PCIe switch, while 12 ports provide room for multiple storage paths. In such a design, the switch can support independent endpoint discovery and traffic routing without assigning every storage controller directly to the processor. Layout engineers should preserve continuous reference planes, minimize layer transitions under the FCBGA-676, and implement the clock and reset topology from the Broadcom reference PCB. Firmware must also recognize the switch during enumeration and provision its downstream links.
Recommended
Network Appliance Port Expansion
The PEX8648-BB50RBCG can expand PCIe connectivity inside a network appliance that combines Ethernet controllers, security processors, storage, and acceleration hardware. Its 12 ports allow several PCIe endpoint groups to be consolidated behind a switch, and the 48-lane fabric provides enough aggregate link capacity for concurrent traffic at 5.0 GT/s per lane. This architecture is particularly useful when the appliance host has fewer PCIe root ports than the required number of NICs or cryptographic engines. The device should be implemented with reference-controlled clocking, reset sequencing, and power delivery. Validate switch training, endpoint ordering, and thermal behavior under sustained network traffic rather than relying only on link-up tests.
Recommended
Embedded Test and Measurement System
The PEX8648-BB50RBCG fits modular test and measurement platforms that need to connect several PCIe instruments, digitizers, or FPGA-based modules through a common switching fabric. The 48-lane, 12-port configuration supports a larger instrument population than a small PCIe switch while maintaining 5.0 GT/s Gen 2 operation. A common PCIe fabric simplifies software discovery and allows modules to share the host platform, although each module must retain its own addressing and configuration space. For reliable measurements, follow the Broadcom reference layout for the 676-ball FCBGA and control impedance discontinuities around every high-speed lane. Add instrumentation points for reference clocks, resets, link status, and auxiliary signals to simplify system validation and fault isolation.
Recommended
Embedded Computer Platform
The PEX8648-BB50RBCG is applicable to embedded computers that need to support several PCI Express cards while using a processor with a limited number of direct lanes. Its 12 ports allow the platform to consolidate network, storage, graphics, and acceleration endpoints, while 48 lanes distribute connectivity across the platform. The Gen 2 interface operates at 5.0 GT/s per lane, providing a practical balance between endpoint count and implementation complexity. Board construction should follow the manufacturer stack-up and escape-routing guidance for FCBGA-676, because this package demands dense via-in-pad or through-via escape structures. Confirm operating-temperature limits, power requirements, and switch firmware support against the exact Broadcom ordering code.
Recommended
PCIe Security and Acceleration Appliance
The PEX8648-BB50RBCG can provide a high-fan-out PCIe fabric for appliances combining cryptographic engines, packet processors, storage accelerators, and management controllers. With 48 lanes at 5.0 GT/s per lane and 12 ports, the switch supports several high-bandwidth devices behind one upstream link while allowing traffic to be distributed among downstream endpoints. This makes it useful in secure network gateways and hardware security appliances where component count and expansion flexibility matter. The design must account for endpoint power states, orderly reset, reference-clock integrity, and firmware enumeration. Use the Broadcom reference PCB files and validate all high-speed pairs with the intended stack-up before production release.
Recommended
Recommended Products Summary
Engineering reference data for PEX8648-BB50RBCG — comparison, design guidance, and compliance information.
Selection Guide
Comparison with Alternatives
| Parameter | This Product | PEX8648-BB50RBC-F | PEX8648-BB50RBI-G | PEX8648-BB50BC | PEX8648-BB50BI-F |
|---|---|---|---|---|---|
| Brand | Broadcom | Broadcom | Broadcom | Broadcom | Broadcom |
| Package | FCBGA-676 (27x27 mm) | FCBGA-676 (27x27 mm) - same package class | FCBGA-676 (27x27 mm) - same package class | FCBGA-676 - same package class | FCBGA-676 - same package class |
| PCI Express Generation | Gen 2 | Gen 2 | Gen 2 | Gen 2 | Gen 2 |
| Lane Count | 48 lanes | 48 lanes | 48 lanes | 48 lanes | 48 lanes |
| Port Count | 12 ports | 12 ports | 12 ports | 12 ports | 12 ports |
| Silicon Family | PEX 8648 | PEX 8648 | PEX 8648 | PEX 8648 | PEX 8648 |
| Ordering Suffix | BB50RBCG | BB50RBC-F | BB50RBI-G | BB50BC | BB50BI-F |
| Special Feature | BB50RBCG ordering configuration | BB50RBC-F ordering configuration | BB50RBI-G ordering configuration | BB50BC ordering configuration | BB50BI-F ordering configuration |
Key Differentiators
- Direct 12-port endpoint fan-out (vs PEX8648-BB50BC)
- Closest documented same-family ordering option (vs PEX8648-BB50RBC-F)
- Consistent 48-lane architecture (vs PEX8648-BB50RBI-G)
Design Notes
Use the Broadcom reference PCB stack-up and escape-routing geometry for the FCBGA-676 package. The 48 PCIe lanes operating at 5.0 GT/s require continuous reference planes and short, symmetric escape paths. Preserve via-in-pad or through-via structures only where the manufacturer layout permits them, and avoid antipads that interrupt return current beneath high-speed differential pairs. Validate every lane with the intended laminate, connectors, retimers, and test equipment before production.
Implement the exact rail and decoupling arrangement from the Broadcom PEX 8648 reference design rather than deriving values from a generic BGA guideline. Separate sensitive supply and ground connections as directed, provide local high-frequency decoupling at the package, and verify voltage droop during simultaneous link training and downstream port activity. The available data does not identify the nominal rails or current limits, so these values must come from the manufacturer data book before schematic release.
Preserve the manufacturer’s clock and reset topology, including any PLL, reference clock, PERST, and auxiliary signal routing. These networks can be sensitive to crosstalk and return-path discontinuities even when the principal PCIe links pass eye tests. Maintain the documented resistor, capacitor, and isolation values around programmable or configurable pins. After layout release, compare every ball assignment against the exact Broadcom ordering code because related BB50 suffixes can differ in production or qualification details.
Do not approve a substitute merely because it is described as a 48-lane, 12-port Gen 2 PCIe switch. A drop-in decision requires matching ball locations, supply rails, clock inputs, reset behavior, lane-width assignments, auxiliary signals, and firmware expectations. In particular, the functional IDT 89H48NT24G2 and Microchip Switchtec alternatives identified by cross-reference listings require package-level validation and may require PCB redesign. Validate enumeration, hot-plug behavior, error handling, and sustained traffic on the final system.
Compliance Information
RoHS compliance is confirmed by the product listing. The available information does not establish REACH, lead-free, halogen-free, or conflict-minerals status for the exact ordering code. Automotive qualification is not applicable to the stated industrial and embedded switching use.