STMicroelectronics

TS941BID - 2.5V-10V Micropower Rail-to-Rail Op Amp | ST

MPN: TS941BID ✓ Active
2.5 V to 10 V Vdss 8-pin SOIC Package
MOQ: 1 |

TS941BID Overview

The STMicroelectronics TS941BID is a single-circuit, rail-to-rail operational amplifier designed for low-voltage and low-power signal-conditioning systems. It operates from 2.5 V to 10 V, supports input and output signals extending toward the supply rails, and is specified across a -40°C to +85°C temperature range. The device is offered in an 8-pin SOIC package and is intended for instrumentation, buffering, sensing, and general-purpose analog applications.

An operational amplifier, or op amp, is an analog integrated circuit that amplifies the difference between two input voltages. A rail-to-rail output stage can swing close to the positive and negative supply limits, making the amplifier useful when the usable signal range is restricted by a low supply voltage. The TS94x family belongs to the operational-amplifier hierarchy, combining generic analog signal amplification with micropower operation for battery-powered and portable equipment.

The TS941BID provides a single amplifier in an 8-pin SOIC package. Its specified 2.5 V to 10 V operating range makes it appropriate for systems powered from low-voltage rails, while its -40°C to +85°C rated range supports industrial and extended-temperature environments. Rail-to-rail output operation increases the available output swing compared with a conventional amplifier whose output remains restricted below the supply rails. The product is described by STMicroelectronics as a micropower, rail-to-rail output operational amplifier.

The architecture is intended for general-purpose analog conditioning rather than for high-speed differential signaling or precision instrumentation requiring unusually low offset and drift. Its low operating-voltage range enables operation from one-cell-compatible or low-voltage regulated rails, and the rail-to-rail output stage helps preserve signal range when the load current and output amplitude remain within the device's operating conditions. The SOIC package also supports conventional surface-mount assembly and easy routing on through-hole-compatible industrial boards.

Typical uses include sensor-signal conditioning, low-voltage instrumentation, portable measurement systems, battery-powered sensing, analog monitoring, and general signal buffering. In a sensor interface, the amplifier can condition a low-amplitude signal before an ADC. In portable equipment, its micropower positioning helps reduce the energy required by the analog front end. It is also useful as a general-purpose rail-to-rail output buffer when the system operates from a 2.5 V to 10 V supply.

Circuit design should account for input common-mode range, output swing, load capability, stability, supply bypassing, and noise performance before assigning the amplifier to a signal chain. Decoupling capacitors should be placed close to the supply pins, and the unused input should be connected to a defined reference potential rather than left floating. The manufacturer datasheet should be used to confirm the complete electrical limits, recommended operating conditions, and pin assignments.

This product page combines the manufacturer family information with practical guidance for low-voltage analog design, including drop-in alternatives, application-oriented use cases, pin-package considerations, and design notes. These engineering notes help engineers evaluate the TS941BID alongside pin-compatible parts while maintaining clear separation between confirmed device characteristics and parameters that require confirmation from the full datasheet.

Drop-in alternatives for TS941BID — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.

Variants in this series

Same-series models that are drop-in compatible with TS941BID (same form factor and footprint) — differing in Amplifier Type, Package.

STMicroelectronics
Amplifier Type: General-purpose operational amplifier
Package: 8-SOIC
Compare with TS941BID →

TS941IDT

✅ Drop-In
STMicroelectronics
📦 8-pin SOIC
General-purpose operational amplifier · 1 circuit · Single operational amplifier · Rail-to-rail · Micropower · 10 kHz · 8-SOIC · Surface mount

Contact for price

View Datasheet →

TS941AIDT

✅ Drop-In
📦 8-pin SOIC
Input offset voltage is 5 mV versus 2 mV for TS941BID, a 3 mV difference; the 8-pin SOIC footprint remains compatible.

📋 Reference alternative (not in catalog)

TS941BID Maximum Ratings & Electrical Characteristics

Amplifier Type Single-circuit operational amplifier
Output Type Rail-to-rail
Operating Supply Voltage Range 2.5 V to 10 V
Operating Temperature Range -40°C to +85°C
Input Offset Voltage 2 mV
Number of Circuits 1 circuit
Package 8-pin SOIC
Mounting Type Surface mount
Product Type General-purpose amplifier
Power Class Micropower
Supply Voltage 2.5 V to 10 V
RoHS Status unknown
REACH Status unknown
AEC-Q100 Qualification not_applicable

TS941BID 8-pin soic Pin Configuration Guide

Pin configuration for TS941BID (8-pin soic package). This analog component features input, output, and power supply pins. Refer to the manufacturer datasheet for offset null, compensation, and enable pin configurations. Ideal for signal conditioning and amplifier circuits.

8-pin soic package pinout diagram for TS941BID

No detailed pinout data available for TS941BID.

Refer to the datasheet for full pin configuration.

Typical Applications

TS941BID is suitable for 6 applications: Battery-Powered Sensor Conditioning, Portable Measurement Systems, Low-Voltage Instrumentation, Analog Monitoring and Control, Rail-to-Rail Signal Buffering, Low-Voltage Audio and Control Signals.

📱

Battery-Powered Sensor Conditioning

The TS941BID fits low-voltage sensor front ends because the TS94x series operates from 2.5 V to 10 V and is characterized as micropower. The single amplifier can condition a sensor output before conversion or sampling, while the 8-pin SOIC package keeps the footprint compact for portable equipment. Its rail-to-rail output stage provides more usable output range than a conventional non-rail-to-rail amplifier at low supply voltages. Before finalizing the design, verify the sensor's output range against the TS941BID input common-mode limits and confirm output swing, noise, stability, and supply current under the actual load and source impedance.

📱

Portable Measurement Systems

A TS941BID-based analog section can amplify weak sensor or divider signals in a portable measurement instrument powered from a low-voltage rail. Its 2.5 V minimum operating voltage supports compact power architectures, while the rail-to-rail output can drive a subsequent ADC or measurement stage more effectively than a restricted-output amplifier. The single-circuit 8-pin SOIC format reduces board space when only one gain stage is required. Because precision performance depends on the actual source impedance and gain setting, engineers should check input bias current, offset voltage, bandwidth, output swing, and noise using the manufacturer datasheet before fixing the gain and filtering values.

🏭

Low-Voltage Instrumentation

The TS941BID is appropriate for general-purpose instrumentation that operates below conventional 5 V or 10 V supply limits. It can provide single-ended amplification or buffering for control, monitoring, and test circuits while preserving a compact 8-pin SOIC footprint. The characterized 2 mV input offset should be included in total error analysis, especially for low-level measurements, and the selected gain must remain within the amplifier's verified stability and bandwidth limits. Supply bypassing should be placed close to the device, and unused inputs should be tied to a defined reference to prevent unintended behavior in low-noise analog systems.

🏭

Analog Monitoring and Control

TS941BID can condition a monitoring signal before it enters a controller, comparator, or data-conversion stage in a low-voltage industrial system. Its 2.5 V to 10 V operating range accommodates several common regulated supply levels, and the rail-to-rail output may provide additional headroom for control signals. The -40°C to +85°C characterized family range supports extended-temperature equipment where internal temperatures remain within the applicable limits. Designers should verify long-term offset stability, output drive, noise behavior, and power dissipation under the production load, and should avoid using the device outside its specified common-mode and supply boundaries.

⚡

Rail-to-Rail Signal Buffering

The TS941BID is useful when a high-impedance source must drive a subsequent low-voltage circuit and the required output can approach the supply rails. The rail-to-rail output stage supports greater signal range in a 2.5 V to 10 V system, while the single SOIC-8 implementation suits designs requiring only one buffer channel. Buffering is not unity-gain guaranteed, so engineers must confirm stability with the selected gain, load capacitance, and source impedance. Decoupling, grounding, and feedback routing should be arranged for stable operation, particularly when driving long PCB traces or capacitive inputs.

🎧

Low-Voltage Audio and Control Signals

The TS941BID can amplify low-level audio or control signals in a compact, low-voltage circuit, provided the required bandwidth, output swing, and noise meet the application specification. Rail-to-rail output operation increases signal range in a supply-constrained design, while the micropower characterization is beneficial for portable systems. The 2 mV input offset must be considered when the amplified signal can approach the input range. The design should include appropriate input filtering, local supply bypassing, a defined reference for unused inputs, and an output path that respects the amplifier's capacitive-load and stability limits.

What is the operating voltage range of TS941BID?
The TS941BID operates from 2.5 V to 10 V. According to the STMicroelectronics TS941 product page, the TS94x single, dual, and quad series is characterized for this supply range over -40°C to +85°C. The operating range allows the amplifier to operate from low-voltage regulated or battery-derived rails while retaining compatibility with higher-voltage analog systems.
What is the TS941BID and what is it used for?
The TS941BID is a single-circuit, rail-to-rail output, micropower operational amplifier in an 8-pin SOIC package. According to the STMicroelectronics TS941 family description, it is intended for general-purpose analog signal amplification within a 2.5 V to 10 V supply range. Typical uses include low-voltage sensor conditioning, buffering, instrumentation, and portable measurement systems.
Where can I download the TS941BID datasheet PDF?
The official TS941 product page is available from STMicroelectronics and links to the family documentation. A direct TS941BID datasheet listing is also available through the Datasheets.com result on this page. Use the manufacturer PDF for final electrical limits and pin assignments, and confirm that the downloaded document identifies the TS941BID ordering option.
Where can I find the TS941BID pinout?
The TS941BID uses an 8-pin SOIC package, and its complete pin assignments are defined in the manufacturer pin-description table. Use the SOIC-8 package drawing and pin-description table in the STMicroelectronics datasheet when assigning PCB tracks. Do not infer pin functions from package position alone, because power, input, output, and compensation connections must match the exact device documentation.
Where can I buy TS941BID online?
The TS941BID can be requested through the Request a Quote form on this page. The form is the appropriate purchasing route for current commercial terms, lot-size requirements, delivery timing, and requested packaging. The manufacturer identifies the TS94x family for operation from 2.5 V to 10 V over -40°C to +85°C, allowing technical suitability to be evaluated before procurement.
What is the price of TS941BID?
Current commercial pricing for the TS941BID is presented through the Request a Quote form on this page. Use that form when a firm quotation is required, and specify the quantity, shipment destination, and preferred delivery terms. The device is a single micropower operational amplifier in an 8-pin SOIC package for systems operating from 2.5 V to 10 V.
What is the lead time for TS941BID?
Request the current lead time through the Request a Quote form on this page. Lead time can depend on order quantity, manufacturing availability, and the delivery terms selected for the purchase. For technical planning, the TS941BID is a single rail-to-rail micropower amplifier intended for a 2.5 V to 10 V supply and an 8-pin SOIC package.
Is TS941BID in stock?
Current stock status should be confirmed through the Request a Quote form on this page. Provide the required quantity and intended shipment details so procurement can return an availability-backed quotation. The technical configuration is a one-amplifier rail-to-rail device in an 8-pin SOIC package, operating across the manufacturer-specified 2.5 V to 10 V range.
TS941BID vs TS941AIDT - which is better for low-voltage amplification?
The TS941BID is preferable when the 2 mV input-offset-voltage characterization is important, while TS941AIDT is specified with 5 mV input offset. Both are associated with the TS941 family and the 8-pin SOIC footprint, but the ordering and delivery codes can differ between tube and tape-and-reel packaging. A technical comparison should therefore include offset voltage, supply range, stability, and required assembly packaging.
What is the difference between TS941BID and TS941IDT?
The TS941BID and TS941IDT have identical primary performance profiles according to the Xecor comparison result, and both are 8-pin SOIC devices associated with the TS941 family. Their principal distinction is the exact STMicroelectronics ordering code and associated delivery format. Confirm the pin functions, grade markings, and shipment packaging against the manufacturer documentation before treating one as a substitute for the other.
When should I choose TS941BID over TS941IDT?
Choose the TS941BID when an exact TS941BID ordering code is required for qualification, traceability, or approved sourcing, and when its characterized 2 mV input offset is appropriate for the circuit. TS941IDT may be considered when its order code and packaging meet the assembly plan. The comparison result reports no measurable primary-performance difference, so procurement and documentation requirements can drive the final selection.
When should I choose TS941BID over TS941AIDT?
Choose the TS941BID when the lower 2 mV input-offset-voltage specification is preferable to the 5 mV value associated with TS941AIDT, or when TS941BID is the approved ordering code. TS941AIDT remains relevant when its electrical and commercial configuration fits the design. Both use the SOIC footprint, but package-delivery format and exact MPN requirements must still be checked.
Is TS941BID suitable for battery-powered sensor interfaces?
The TS941BID is suitable for low-voltage sensor interfaces because the TS94x series operates from 2.5 V to 10 V and is characterized as micropower. Its single-amplifier 8-pin SOIC format is appropriate for compact analog-conditioning circuits. The final design must verify supply current, input common-mode range, output swing, noise, and stability under the actual sensor source impedance and load.
What is the best drop-in replacement for TS941BID?
TS941IDT is the closest listed replacement because a comparison identifies identical primary performance profiles and both devices use the 8-pin SOIC footprint. TS941AIDT is another same-footprint option, but its input offset voltage is listed as 5 mV versus 2 mV for TS941BID. Verify exact pin functions, electrical limits, markings, and packaging before approving either substitution.
Can TS941AIDT replace TS941BID without a PCB change?
The TS941AIDT uses the same 8-pin SOIC footprint, so it can be evaluated as a no-footprint-change option. Its input offset voltage is listed as 5 mV compared with 2 mV for TS941BID, creating a measurable 3 mV difference. Before substitution, verify supply voltage, common-mode range, output swing, stability, and assembly format using the manufacturer documentation.
What can replace TS941BID?
TS941IDT and TS941AIDT are the verified same-footprint candidates for TS941BID replacement. TS941IDT has identical primary performance ratings in the cited comparison, while TS941AIDT differs by input offset voltage. Both should remain subject to a final review of pin functions, electrical limits, temperature behavior, and production documentation before being used as drop-in replacements.
What are the key specifications of TS941BID that engineers should know?
The TS941BID is a single-circuit, rail-to-rail output, micropower operational amplifier specified for 2.5 V to 10 V operation over -40°C to +85°C. It has a characterized 2 mV input offset voltage and uses an 8-pin SOIC package. These specifications place it in low-voltage general-purpose analog signal-conditioning applications where package footprint, supply range, offset voltage, and temperature rating drive qualification.

Engineering reference data for TS941BID — comparison, design guidance, and compliance information.

Selection Guide

Choose the TS941BID when the design requires a single rail-to-rail micropower amplifier in an 8-pin SOIC package, operates from 2.5 V to 10 V, and benefits from the characterized 2 mV input offset voltage. Choose TS941IDT when the cited comparison's identical primary performance profile meets the circuit requirements and the alternative ordering code is approved for the assembly plan. Choose TS941AIDT when its same-footprint configuration and tape-and-reel delivery format fit production, while accepting the listed increase in input offset voltage from 2 mV to 5 mV. In every case, confirm input common-mode range, output swing, bandwidth, noise, stability, and exact pin assignments in the manufacturer documentation. These parts are suitable only when their verified electrical limits cover the actual source impedance, load, gain, temperature, and supply conditions.

Comparison with Alternatives

Parameter This Product TS941IDT TS941AIDT
Package 8-pin SOIC 8-pin SOIC 8-pin SOIC
Brand STMicroelectronics STMicroelectronics STMicroelectronics
Amplifier Configuration Single circuit Single circuit Single circuit
Input Offset Voltage 2 mV 2 mV 5 mV
Output Type Rail-to-rail Rail-to-rail Rail-to-rail
Power Class Micropower Micropower Micropower

Key Differentiators

  • Lower characterized input offset voltage (vs TS941AIDT)
  • Identical primary performance profile (vs TS941IDT)
  • Compact single-amplifier footprint (vs TS941AIDT)

Design Notes

Place the required supply-decoupling capacitor as close as practical to the power and ground pins, with a short return path to the device. Keep analog and high-current return currents separate where the board layout permits. The TS941BID supports a 2.5 V to 10 V operating range, but the complete datasheet must be consulted for capacitor values, supply current, input common-mode limits, and output swing before the circuit is released.

Route the op-amp feedback and non-inverting inputs away from switching nodes, high-current supply traces, and other noisy sources. Use a continuous ground reference beneath the device where practical, avoid long input traces, and guard sensitive inputs when leakage from PCB contamination could affect a high-impedance source. These practices are especially important when the TS941BID operates from a low rail and the available signal swing is already limited.

Do not assume that rail-to-rail output operation allows the output to reach either supply rail under every load. Confirm output swing, input common-mode range, stability, and load capability from the manufacturer documentation. Also connect the unused input to a defined reference potential, and verify the selected feedback gain against the required bandwidth and signal source impedance.

Compliance Information

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Lead Free
Unknown
Halogen Free
Unknown
Conflict Minerals
Unknown

No specific RoHS, REACH, lead-free, halogen-free, conflict-minerals, or automotive qualification statement was identified for the exact TS941BID ordering code. AEC-Q100 is marked not applicable because this general-purpose operational amplifier is not presented as an automotive-qualified device.

Data verified on: 2026-11-16 — data verified and curated by XAIPART's component engineering team

Related Searches

TS941BID datasheet TS941BID pinout TS941BID datasheet pdf TS941BID equivalent TS941BID replacement TS941BID vs TS941IDT TS941BID vs TS941AIDT TS941BID price TS941BID stock STMicroelectronics TS941BID TS941BID 2.5V 10V amplifier TS941BID SOIC-8 footprint

Related Components & Terms

STMicroelectronics TS941BID TS941IDT TS941AIDT operational amplifier op amp single-circuit amplifier rail-to-rail output amplifier micropower amplifier analog integrated circuit signal conditioning instrumentation amplifier 2.5 V minimum supply voltage 10 V maximum supply voltage 2 mV input offset voltage 8-pin SOIC SOIC family surface-mount package SMD package low-voltage analog battery-powered electronics industrial instrumentation portable measurement input common-mode range output swing
Quick Quote RFQ
Fill in complete details — our sales team will respond within 24 hours
Part Number Manufacturer Package QTY Target Price Extended
✓
Quote submitted!

We will respond to your email within 24 hours

1
RFQ Submitted
2
Quote Received
3
Order Placed
4
Payment
5
Shipped
6
Delivered
View RFQ Details