TS941BID - 2.5V-10V Micropower Rail-to-Rail Op Amp | ST
MPN: TS941BID ✓ Hoạt độngTS941BID Tóm tắt
An operational amplifier, or op amp, is an analog integrated circuit that amplifies the difference between two input voltages. A rail-to-rail output stage can swing close to the positive and negative supply limits, making the amplifier useful when the usable signal range is restricted by a low supply voltage. The TS94x family belongs to the operational-amplifier hierarchy, combining generic analog signal amplification with micropower operation for battery-powered and portable equipment.
The TS941BID provides a single amplifier in an 8-pin SOIC package. Its specified 2.5 V to 10 V operating range makes it appropriate for systems powered from low-voltage rails, while its -40°C to +85°C rated range supports industrial and extended-temperature environments. Rail-to-rail output operation increases the available output swing compared with a conventional amplifier whose output remains restricted below the supply rails. The product is described by STMicroelectronics as a micropower, rail-to-rail output operational amplifier.
The architecture is intended for general-purpose analog conditioning rather than for high-speed differential signaling or precision instrumentation requiring unusually low offset and drift. Its low operating-voltage range enables operation from one-cell-compatible or low-voltage regulated rails, and the rail-to-rail output stage helps preserve signal range when the load current and output amplitude remain within the device's operating conditions. The SOIC package also supports conventional surface-mount assembly and easy routing on through-hole-compatible industrial boards.
Typical uses include sensor-signal conditioning, low-voltage instrumentation, portable measurement systems, battery-powered sensing, analog monitoring, and general signal buffering. In a sensor interface, the amplifier can condition a low-amplitude signal before an ADC. In portable equipment, its micropower positioning helps reduce the energy required by the analog front end. It is also useful as a general-purpose rail-to-rail output buffer when the system operates from a 2.5 V to 10 V supply.
Circuit design should account for input common-mode range, output swing, load capability, stability, supply bypassing, and noise performance before assigning the amplifier to a signal chain. Decoupling capacitors should be placed close to the supply pins, and the unused input should be connected to a defined reference potential rather than left floating. The manufacturer datasheet should be used to confirm the complete electrical limits, recommended operating conditions, and pin assignments.
This product page combines the manufacturer family information with practical guidance for low-voltage analog design, including drop-in alternatives, application-oriented use cases, pin-package considerations, and design notes. These engineering notes help engineers evaluate the TS941BID alongside pin-compatible parts while maintaining clear separation between confirmed device characteristics and parameters that require confirmation from the full datasheet.
Bộ thay thế dễ dàng lắp đặt cho TS941BID — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với TS941BID (cùng hình factor và footprint) — khác nhau ở Amplifier Type, Package.
TS941IDT
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →TS941AIDT
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
TS941BID Tỷ lệ tối đa & tính chất điện
| Amplifier Type | Single-circuit operational amplifier |
| Kiểu đầu ra | Rail-to-rail |
| Operating Supply Voltage Range | 2.5 V to 10 V |
| Khoảng nhiệt độ hoạt động | -40°C to +85°C |
| Input Offset Voltage | 2 mV |
| Number of Circuits | 1 circuit |
| Hộp | 8-pin SOIC |
| Kiểu lắp đặt | Surface mount |
| Product Type | General-purpose amplifier |
| Power Class | Micropower |
| Điện áp cung cấp | 2.5 V to 10 V |
| Trạng thái RoHS | unknown |
| REACH Status | unknown |
| AEC-Q100 Qualification | not_applicable |
Hướng dẫn cấu hình chân TS941BID 8-pin soic
Cấu hình chân cho TS941BID (8-pin soic gói). Thành phần số hiệu này có chân đầu vào, đầu ra và nguồn cung cấp. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết cấu hình chân bù, bù trừ và chân kích hoạt. Hoàn hảo cho điều kiện tín hiệu và mạch khuếch đại.
Không có dữ liệu chân cụ thể sẵn có cho TS941BID.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
TS941BID phù hợp cho 6 Áp dụngs: Battery-Powered Sensor Conditioning, Portable Measurement Systems, Low-Voltage Instrumentation, Analog Monitoring and Control, Rail-to-Rail Signal Buffering, Low-Voltage Audio and Control Signals.
Battery-Powered Sensor Conditioning
The TS941BID fits low-voltage sensor front ends because the TS94x series operates from 2.5 V to 10 V and is characterized as micropower. The single amplifier can condition a sensor output before conversion or sampling, while the 8-pin SOIC package keeps the footprint compact for portable equipment. Its rail-to-rail output stage provides more usable output range than a conventional non-rail-to-rail amplifier at low supply voltages. Before finalizing the design, verify the sensor's output range against the TS941BID input common-mode limits and confirm output swing, noise, stability, and supply current under the actual load and source impedance.
Được đề xuất
Portable Measurement Systems
A TS941BID-based analog section can amplify weak sensor or divider signals in a portable measurement instrument powered from a low-voltage rail. Its 2.5 V minimum operating voltage supports compact power architectures, while the rail-to-rail output can drive a subsequent ADC or measurement stage more effectively than a restricted-output amplifier. The single-circuit 8-pin SOIC format reduces board space when only one gain stage is required. Because precision performance depends on the actual source impedance and gain setting, engineers should check input bias current, offset voltage, bandwidth, output swing, and noise using the manufacturer datasheet before fixing the gain and filtering values.
Được đề xuất
Low-Voltage Instrumentation
The TS941BID is appropriate for general-purpose instrumentation that operates below conventional 5 V or 10 V supply limits. It can provide single-ended amplification or buffering for control, monitoring, and test circuits while preserving a compact 8-pin SOIC footprint. The characterized 2 mV input offset should be included in total error analysis, especially for low-level measurements, and the selected gain must remain within the amplifier's verified stability and bandwidth limits. Supply bypassing should be placed close to the device, and unused inputs should be tied to a defined reference to prevent unintended behavior in low-noise analog systems.
Được đề xuất
Analog Monitoring and Control
TS941BID can condition a monitoring signal before it enters a controller, comparator, or data-conversion stage in a low-voltage industrial system. Its 2.5 V to 10 V operating range accommodates several common regulated supply levels, and the rail-to-rail output may provide additional headroom for control signals. The -40°C to +85°C characterized family range supports extended-temperature equipment where internal temperatures remain within the applicable limits. Designers should verify long-term offset stability, output drive, noise behavior, and power dissipation under the production load, and should avoid using the device outside its specified common-mode and supply boundaries.
Được đề xuất
Rail-to-Rail Signal Buffering
The TS941BID is useful when a high-impedance source must drive a subsequent low-voltage circuit and the required output can approach the supply rails. The rail-to-rail output stage supports greater signal range in a 2.5 V to 10 V system, while the single SOIC-8 implementation suits designs requiring only one buffer channel. Buffering is not unity-gain guaranteed, so engineers must confirm stability with the selected gain, load capacitance, and source impedance. Decoupling, grounding, and feedback routing should be arranged for stable operation, particularly when driving long PCB traces or capacitive inputs.
Được đề xuất
Low-Voltage Audio and Control Signals
The TS941BID can amplify low-level audio or control signals in a compact, low-voltage circuit, provided the required bandwidth, output swing, and noise meet the application specification. Rail-to-rail output operation increases signal range in a supply-constrained design, while the micropower characterization is beneficial for portable systems. The 2 mV input offset must be considered when the amplified signal can approach the input range. The design should include appropriate input filtering, local supply bypassing, a defined reference for unused inputs, and an output path that respects the amplifier's capacitive-load and stability limits.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho TS941BID — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | TS941IDT | TS941AIDT |
|---|---|---|---|
| Package | 8-pin SOIC | 8-pin SOIC | 8-pin SOIC |
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Amplifier Configuration | Single circuit | Single circuit | Single circuit |
| Input Offset Voltage | 2 mV | 2 mV | 5 mV |
| Output Type | Rail-to-rail | Rail-to-rail | Rail-to-rail |
| Power Class | Micropower | Micropower | Micropower |
Bảo phân biệt quan trọng
- Lower characterized input offset voltage (vsTS941AIDT)
- Identical primary performance profile (vsTS941IDT)
- Compact single-amplifier footprint (vsTS941AIDT)
Ghi chú thiết kế
Place the required supply-decoupling capacitor as close as practical to the power and ground pins, with a short return path to the device. Keep analog and high-current return currents separate where the board layout permits. The TS941BID supports a 2.5 V to 10 V operating range, but the complete datasheet must be consulted for capacitor values, supply current, input common-mode limits, and output swing before the circuit is released.
Route the op-amp feedback and non-inverting inputs away from switching nodes, high-current supply traces, and other noisy sources. Use a continuous ground reference beneath the device where practical, avoid long input traces, and guard sensitive inputs when leakage from PCB contamination could affect a high-impedance source. These practices are especially important when the TS941BID operates from a low rail and the available signal swing is already limited.
Do not assume that rail-to-rail output operation allows the output to reach either supply rail under every load. Confirm output swing, input common-mode range, stability, and load capability from the manufacturer documentation. Also connect the unused input to a defined reference potential, and verify the selected feedback gain against the required bandwidth and signal source impedance.
Thông tin tuân thủ
No specific RoHS, REACH, lead-free, halogen-free, conflict-minerals, or automotive qualification statement was identified for the exact TS941BID ordering code. AEC-Q100 is marked not applicable because this general-purpose operational amplifier is not presented as an automotive-qualified device.