TS941BID - 2.5V-10V Micropower Rail-to-Rail Op Amp | ST
MPN: TS941BID ✓ 啟用中TS941BID 概覽
An operational amplifier, or op amp, is an analog integrated circuit that amplifies the difference between two input voltages. A rail-to-rail output stage can swing close to the positive and negative supply limits, making the amplifier useful when the usable signal range is restricted by a low supply voltage. The TS94x family belongs to the operational-amplifier hierarchy, combining generic analog signal amplification with micropower operation for battery-powered and portable equipment.
The TS941BID provides a single amplifier in an 8-pin SOIC package. Its specified 2.5 V to 10 V operating range makes it appropriate for systems powered from low-voltage rails, while its -40°C to +85°C rated range supports industrial and extended-temperature environments. Rail-to-rail output operation increases the available output swing compared with a conventional amplifier whose output remains restricted below the supply rails. The product is described by STMicroelectronics as a micropower, rail-to-rail output operational amplifier.
The architecture is intended for general-purpose analog conditioning rather than for high-speed differential signaling or precision instrumentation requiring unusually low offset and drift. Its low operating-voltage range enables operation from one-cell-compatible or low-voltage regulated rails, and the rail-to-rail output stage helps preserve signal range when the load current and output amplitude remain within the device's operating conditions. The SOIC package also supports conventional surface-mount assembly and easy routing on through-hole-compatible industrial boards.
Typical uses include sensor-signal conditioning, low-voltage instrumentation, portable measurement systems, battery-powered sensing, analog monitoring, and general signal buffering. In a sensor interface, the amplifier can condition a low-amplitude signal before an ADC. In portable equipment, its micropower positioning helps reduce the energy required by the analog front end. It is also useful as a general-purpose rail-to-rail output buffer when the system operates from a 2.5 V to 10 V supply.
Circuit design should account for input common-mode range, output swing, load capability, stability, supply bypassing, and noise performance before assigning the amplifier to a signal chain. Decoupling capacitors should be placed close to the supply pins, and the unused input should be connected to a defined reference potential rather than left floating. The manufacturer datasheet should be used to confirm the complete electrical limits, recommended operating conditions, and pin assignments.
This product page combines the manufacturer family information with practical guidance for low-voltage analog design, including drop-in alternatives, application-oriented use cases, pin-package considerations, and design notes. These engineering notes help engineers evaluate the TS941BID alongside pin-compatible parts while maintaining clear separation between confirmed device characteristics and parameters that require confirmation from the full datasheet.
直接替換替代品,適用於 TS941BID — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: TS941BID (相同外形與佔位) — 差異在於 Amplifier Type, Package.
TS941IDT
✅ 直接替換聯絡詢價
查看資料表 →TS941AIDT
✅ 直接替換📋 參考替代品(不在目錄中)
TS941BID 最大額定值與電氣特性
| Amplifier Type | Single-circuit operational amplifier |
| 輸出類型 | Rail-to-rail |
| Operating Supply Voltage Range | 2.5 V to 10 V |
| 工作溫度範圍 | -40°C to +85°C |
| Input Offset Voltage | 2 mV |
| Number of Circuits | 1 circuit |
| 封裝 | 8-pin SOIC |
| 安裝類型 | Surface mount |
| Product Type | General-purpose amplifier |
| Power Class | Micropower |
| 供應電壓 | 2.5 V to 10 V |
| RoHS 狀態 | unknown |
| REACH Status | unknown |
| AEC-Q100 Qualification | not_applicable |
TS941BID 8-pin soic 腳位配置指南
TS941BID(8-pin soic 封裝)的腳位配置。 此類比元件具有輸入、輸出與電源腳位。偏移歸零、補償與致能腳位配置請參閱製造商資料表。適用於訊號調理與放大器電路。
無詳細腳位定義資料: TS941BID.
請參閱 資料表 以查看完整腳位配置。
典型應用
TS941BID 適用於 6 應用s: Battery-Powered Sensor Conditioning, Portable Measurement Systems, Low-Voltage Instrumentation, Analog Monitoring and Control, Rail-to-Rail Signal Buffering, Low-Voltage Audio and Control Signals.
Battery-Powered Sensor Conditioning
The TS941BID fits low-voltage sensor front ends because the TS94x series operates from 2.5 V to 10 V and is characterized as micropower. The single amplifier can condition a sensor output before conversion or sampling, while the 8-pin SOIC package keeps the footprint compact for portable equipment. Its rail-to-rail output stage provides more usable output range than a conventional non-rail-to-rail amplifier at low supply voltages. Before finalizing the design, verify the sensor's output range against the TS941BID input common-mode limits and confirm output swing, noise, stability, and supply current under the actual load and source impedance.
推薦
Portable Measurement Systems
A TS941BID-based analog section can amplify weak sensor or divider signals in a portable measurement instrument powered from a low-voltage rail. Its 2.5 V minimum operating voltage supports compact power architectures, while the rail-to-rail output can drive a subsequent ADC or measurement stage more effectively than a restricted-output amplifier. The single-circuit 8-pin SOIC format reduces board space when only one gain stage is required. Because precision performance depends on the actual source impedance and gain setting, engineers should check input bias current, offset voltage, bandwidth, output swing, and noise using the manufacturer datasheet before fixing the gain and filtering values.
推薦
Low-Voltage Instrumentation
The TS941BID is appropriate for general-purpose instrumentation that operates below conventional 5 V or 10 V supply limits. It can provide single-ended amplification or buffering for control, monitoring, and test circuits while preserving a compact 8-pin SOIC footprint. The characterized 2 mV input offset should be included in total error analysis, especially for low-level measurements, and the selected gain must remain within the amplifier's verified stability and bandwidth limits. Supply bypassing should be placed close to the device, and unused inputs should be tied to a defined reference to prevent unintended behavior in low-noise analog systems.
推薦
Analog Monitoring and Control
TS941BID can condition a monitoring signal before it enters a controller, comparator, or data-conversion stage in a low-voltage industrial system. Its 2.5 V to 10 V operating range accommodates several common regulated supply levels, and the rail-to-rail output may provide additional headroom for control signals. The -40°C to +85°C characterized family range supports extended-temperature equipment where internal temperatures remain within the applicable limits. Designers should verify long-term offset stability, output drive, noise behavior, and power dissipation under the production load, and should avoid using the device outside its specified common-mode and supply boundaries.
推薦
Rail-to-Rail Signal Buffering
The TS941BID is useful when a high-impedance source must drive a subsequent low-voltage circuit and the required output can approach the supply rails. The rail-to-rail output stage supports greater signal range in a 2.5 V to 10 V system, while the single SOIC-8 implementation suits designs requiring only one buffer channel. Buffering is not unity-gain guaranteed, so engineers must confirm stability with the selected gain, load capacitance, and source impedance. Decoupling, grounding, and feedback routing should be arranged for stable operation, particularly when driving long PCB traces or capacitive inputs.
推薦
Low-Voltage Audio and Control Signals
The TS941BID can amplify low-level audio or control signals in a compact, low-voltage circuit, provided the required bandwidth, output swing, and noise meet the application specification. Rail-to-rail output operation increases signal range in a supply-constrained design, while the micropower characterization is beneficial for portable systems. The 2 mV input offset must be considered when the amplified signal can approach the input range. The design should include appropriate input filtering, local supply bypassing, a defined reference for unused inputs, and an output path that respects the amplifier's capacitive-load and stability limits.
推薦
推薦產品摘要
工程參考資料,適用於 TS941BID — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | TS941IDT | TS941AIDT |
|---|---|---|---|
| Package | 8-pin SOIC | 8-pin SOIC | 8-pin SOIC |
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Amplifier Configuration | Single circuit | Single circuit | Single circuit |
| Input Offset Voltage | 2 mV | 2 mV | 5 mV |
| Output Type | Rail-to-rail | Rail-to-rail | Rail-to-rail |
| Power Class | Micropower | Micropower | Micropower |
主要差異化特點
- Lower characterized input offset voltage (對比TS941AIDT)
- Identical primary performance profile (對比TS941IDT)
- Compact single-amplifier footprint (對比TS941AIDT)
設計說明
Place the required supply-decoupling capacitor as close as practical to the power and ground pins, with a short return path to the device. Keep analog and high-current return currents separate where the board layout permits. The TS941BID supports a 2.5 V to 10 V operating range, but the complete datasheet must be consulted for capacitor values, supply current, input common-mode limits, and output swing before the circuit is released.
Route the op-amp feedback and non-inverting inputs away from switching nodes, high-current supply traces, and other noisy sources. Use a continuous ground reference beneath the device where practical, avoid long input traces, and guard sensitive inputs when leakage from PCB contamination could affect a high-impedance source. These practices are especially important when the TS941BID operates from a low rail and the available signal swing is already limited.
Do not assume that rail-to-rail output operation allows the output to reach either supply rail under every load. Confirm output swing, input common-mode range, stability, and load capability from the manufacturer documentation. Also connect the unused input to a defined reference potential, and verify the selected feedback gain against the required bandwidth and signal source impedance.
合規資訊
No specific RoHS, REACH, lead-free, halogen-free, conflict-minerals, or automotive qualification statement was identified for the exact TS941BID ordering code. AEC-Q100 is marked not applicable because this general-purpose operational amplifier is not presented as an automotive-qualified device.