TS941BID - 2.5V-10V Micropower Rail-to-Rail Op Amp | ST
MPN: TS941BID ✓ פעילTS941BID סקירה
An operational amplifier, or op amp, is an analog integrated circuit that amplifies the difference between two input voltages. A rail-to-rail output stage can swing close to the positive and negative supply limits, making the amplifier useful when the usable signal range is restricted by a low supply voltage. The TS94x family belongs to the operational-amplifier hierarchy, combining generic analog signal amplification with micropower operation for battery-powered and portable equipment.
The TS941BID provides a single amplifier in an 8-pin SOIC package. Its specified 2.5 V to 10 V operating range makes it appropriate for systems powered from low-voltage rails, while its -40°C to +85°C rated range supports industrial and extended-temperature environments. Rail-to-rail output operation increases the available output swing compared with a conventional amplifier whose output remains restricted below the supply rails. The product is described by STMicroelectronics as a micropower, rail-to-rail output operational amplifier.
The architecture is intended for general-purpose analog conditioning rather than for high-speed differential signaling or precision instrumentation requiring unusually low offset and drift. Its low operating-voltage range enables operation from one-cell-compatible or low-voltage regulated rails, and the rail-to-rail output stage helps preserve signal range when the load current and output amplitude remain within the device's operating conditions. The SOIC package also supports conventional surface-mount assembly and easy routing on through-hole-compatible industrial boards.
Typical uses include sensor-signal conditioning, low-voltage instrumentation, portable measurement systems, battery-powered sensing, analog monitoring, and general signal buffering. In a sensor interface, the amplifier can condition a low-amplitude signal before an ADC. In portable equipment, its micropower positioning helps reduce the energy required by the analog front end. It is also useful as a general-purpose rail-to-rail output buffer when the system operates from a 2.5 V to 10 V supply.
Circuit design should account for input common-mode range, output swing, load capability, stability, supply bypassing, and noise performance before assigning the amplifier to a signal chain. Decoupling capacitors should be placed close to the supply pins, and the unused input should be connected to a defined reference potential rather than left floating. The manufacturer datasheet should be used to confirm the complete electrical limits, recommended operating conditions, and pin assignments.
This product page combines the manufacturer family information with practical guidance for low-voltage analog design, including drop-in alternatives, application-oriented use cases, pin-package considerations, and design notes. These engineering notes help engineers evaluate the TS941BID alongside pin-compatible parts while maintaining clear separation between confirmed device characteristics and parameters that require confirmation from the full datasheet.
חלופות תחליף ישיר עבור TS941BID — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
וריאנטים בסדרה זו
דגמים מאותה סדרה התואמים Drop-in עם TS941BID (אותו גורם צורה וטביעת רגל) — שונים ב Amplifier Type, Package.
TS941IDT
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←TS941AIDT
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
TS941BID דירוגים מרביים ומאפיינים חשמליים
| Amplifier Type | Single-circuit operational amplifier |
| סוג פלט | Rail-to-rail |
| Operating Supply Voltage Range | 2.5 V to 10 V |
| טווח טמפרטורת פעולה | -40°C to +85°C |
| Input Offset Voltage | 2 mV |
| Number of Circuits | 1 circuit |
| מארז | 8-pin SOIC |
| סוג הרכבה | Surface mount |
| Product Type | General-purpose amplifier |
| Power Class | Micropower |
| מתח אספקה | 2.5 V to 10 V |
| סטטוס RoHS | unknown |
| REACH Status | unknown |
| AEC-Q100 Qualification | not_applicable |
מדריך תצורת פינים של TS941BID 8-pin soic
תצורת פינים עבור TS941BID (מארזת 8-pin soic). רכיב אנלוגי זה כולל פיני כניסה, יציאה ואספקת מתח. יש לעיין בגיליון הנתונים של היצרן לתצורות פיני איפוס היסט, פיצוי והפעלה. אידיאלי למעגלי עיצוב אותות ומגברים.
אין נתוני פריסת פינים מפורטים עבור TS941BID.
עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.
יישומים טיפוסיים
TS941BID מתאים עבור 6 יישוםs: Battery-Powered Sensor Conditioning, Portable Measurement Systems, Low-Voltage Instrumentation, Analog Monitoring and Control, Rail-to-Rail Signal Buffering, Low-Voltage Audio and Control Signals.
Battery-Powered Sensor Conditioning
The TS941BID fits low-voltage sensor front ends because the TS94x series operates from 2.5 V to 10 V and is characterized as micropower. The single amplifier can condition a sensor output before conversion or sampling, while the 8-pin SOIC package keeps the footprint compact for portable equipment. Its rail-to-rail output stage provides more usable output range than a conventional non-rail-to-rail amplifier at low supply voltages. Before finalizing the design, verify the sensor's output range against the TS941BID input common-mode limits and confirm output swing, noise, stability, and supply current under the actual load and source impedance.
מומלץ
Portable Measurement Systems
A TS941BID-based analog section can amplify weak sensor or divider signals in a portable measurement instrument powered from a low-voltage rail. Its 2.5 V minimum operating voltage supports compact power architectures, while the rail-to-rail output can drive a subsequent ADC or measurement stage more effectively than a restricted-output amplifier. The single-circuit 8-pin SOIC format reduces board space when only one gain stage is required. Because precision performance depends on the actual source impedance and gain setting, engineers should check input bias current, offset voltage, bandwidth, output swing, and noise using the manufacturer datasheet before fixing the gain and filtering values.
מומלץ
Low-Voltage Instrumentation
The TS941BID is appropriate for general-purpose instrumentation that operates below conventional 5 V or 10 V supply limits. It can provide single-ended amplification or buffering for control, monitoring, and test circuits while preserving a compact 8-pin SOIC footprint. The characterized 2 mV input offset should be included in total error analysis, especially for low-level measurements, and the selected gain must remain within the amplifier's verified stability and bandwidth limits. Supply bypassing should be placed close to the device, and unused inputs should be tied to a defined reference to prevent unintended behavior in low-noise analog systems.
מומלץ
Analog Monitoring and Control
TS941BID can condition a monitoring signal before it enters a controller, comparator, or data-conversion stage in a low-voltage industrial system. Its 2.5 V to 10 V operating range accommodates several common regulated supply levels, and the rail-to-rail output may provide additional headroom for control signals. The -40°C to +85°C characterized family range supports extended-temperature equipment where internal temperatures remain within the applicable limits. Designers should verify long-term offset stability, output drive, noise behavior, and power dissipation under the production load, and should avoid using the device outside its specified common-mode and supply boundaries.
מומלץ
Rail-to-Rail Signal Buffering
The TS941BID is useful when a high-impedance source must drive a subsequent low-voltage circuit and the required output can approach the supply rails. The rail-to-rail output stage supports greater signal range in a 2.5 V to 10 V system, while the single SOIC-8 implementation suits designs requiring only one buffer channel. Buffering is not unity-gain guaranteed, so engineers must confirm stability with the selected gain, load capacitance, and source impedance. Decoupling, grounding, and feedback routing should be arranged for stable operation, particularly when driving long PCB traces or capacitive inputs.
מומלץ
Low-Voltage Audio and Control Signals
The TS941BID can amplify low-level audio or control signals in a compact, low-voltage circuit, provided the required bandwidth, output swing, and noise meet the application specification. Rail-to-rail output operation increases signal range in a supply-constrained design, while the micropower characterization is beneficial for portable systems. The 2 mV input offset must be considered when the amplified signal can approach the input range. The design should include appropriate input filtering, local supply bypassing, a defined reference for unused inputs, and an output path that respects the amplifier's capacitive-load and stability limits.
מומלץ
סיכום מוצרים מומלצים
נתוני עזר הנדסיים עבור TS941BID — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה | TS941IDT | TS941AIDT |
|---|---|---|---|
| Package | 8-pin SOIC | 8-pin SOIC | 8-pin SOIC |
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Amplifier Configuration | Single circuit | Single circuit | Single circuit |
| Input Offset Voltage | 2 mV | 2 mV | 5 mV |
| Output Type | Rail-to-rail | Rail-to-rail | Rail-to-rail |
| Power Class | Micropower | Micropower | Micropower |
מבדילים עיקריים
- Lower characterized input offset voltage (לעומתTS941AIDT)
- Identical primary performance profile (לעומתTS941IDT)
- Compact single-amplifier footprint (לעומתTS941AIDT)
הערות תכנון
Place the required supply-decoupling capacitor as close as practical to the power and ground pins, with a short return path to the device. Keep analog and high-current return currents separate where the board layout permits. The TS941BID supports a 2.5 V to 10 V operating range, but the complete datasheet must be consulted for capacitor values, supply current, input common-mode limits, and output swing before the circuit is released.
Route the op-amp feedback and non-inverting inputs away from switching nodes, high-current supply traces, and other noisy sources. Use a continuous ground reference beneath the device where practical, avoid long input traces, and guard sensitive inputs when leakage from PCB contamination could affect a high-impedance source. These practices are especially important when the TS941BID operates from a low rail and the available signal swing is already limited.
Do not assume that rail-to-rail output operation allows the output to reach either supply rail under every load. Confirm output swing, input common-mode range, stability, and load capability from the manufacturer documentation. Also connect the unused input to a defined reference potential, and verify the selected feedback gain against the required bandwidth and signal source impedance.
מידע על תאימות
No specific RoHS, REACH, lead-free, halogen-free, conflict-minerals, or automotive qualification statement was identified for the exact TS941BID ordering code. AEC-Q100 is marked not applicable because this general-purpose operational amplifier is not presented as an automotive-qualified device.