Texas Instruments

TUSB6015IZQE - USB 2.0 HS OTG Controller | Texas Instruments

MPN: TUSB6015IZQE ✓ Active
1.5 V Vdss 80-BGA MICROSTAR JUNIOR Package
MOQ: 1 |

TUSB6015IZQE Overview

Texas Instruments TUSB6015IZQE is a USB 2.0 high-speed On-The-Go dual-role controller with a 1.5 V core supply, 80-pin BGA MICROSTAR JUNIOR package, and an industrial operating-temperature range of -40°C to +85°C. The controller supports peripheral, embedded-host, and OTG-device operating roles within one integrated USB interface device.

A USB OTG dual-role controller is an interface IC that combines device and host functions within a USB 2.0 system. The TUSB6015IZQE can participate as a USB high-speed peripheral, a USB high-speed embedded host, or an OTG device. This role flexibility makes the device useful in portable equipment, storage accessories, test systems, and embedded USB products that need to negotiate host or device behavior through firmware.

The principal specifications are USB 2.0 high-speed operation, a 1.5 V supply, support for 1.5 V, 1.8 V, and 3.3 V interface signaling, an 80-BGA MICROSTAR JUNIOR package measuring 5 mm by 5 mm, and an operating-temperature range of -40°C to +85°C. The 80-pin surface-mount construction supports dense PCB layouts while providing separate connections required by a multifunction USB controller.

The TUSB6015IZQE combines high-speed USB peripheral logic, embedded-host control, and OTG device behavior in a single controller. Its dual-role architecture reduces the need for separate USB host and device controllers in compact products. Firmware can select the required operating role, while the integrated interface circuitry manages communication between the USB bus and the host-side logic.

Typical uses include USB storage bridges, portable media equipment, multifunction peripherals, industrial data-acquisition equipment, and embedded systems that must support both host and peripheral connections. The small 5 mm by 5 mm BGA footprint is especially useful where connector placement, enclosure size, and routing density limit the available board area.

Layout is the primary implementation concern for this device. Place the USB differential pair as a controlled-impedance route, minimize stub lengths, and place required bypass capacitors close to their power pins. Because the package uses an 80-ball BGA, inspection and assembly processes must support fine-pitch BGA soldering, and the PCB must provide adequate thermal and power-delivery paths.

This page consolidates the manufacturer specification, package information, sourcing workflow, interface role descriptions, and practical implementation guidance for engineers evaluating the TUSB6015IZQE in USB 2.0 HS OTG designs.

Drop-in alternatives for TUSB6015IZQE — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.

No drop-in alternatives available for this product.

Request Alternatives

TUSB6015IZQE Specifications

Device Type USB 2.0 high-speed OTG dual-role controller
USB Interface USB 2.0 high-speed
Operating Roles Peripheral, embedded host, and OTG device
Core Supply Voltage 1.5 V
Interface Supply Voltages 1.5 V, 1.8 V, and 3.3 V
Operating Temperature Range -40°C to +85°C
Package Type 80-BGA MICROSTAR JUNIOR
Package Dimensions 5 mm x 5 mm
Pin Count 80 pins
Mounting Type Surface mount
Device Classification Line / Bus Controller
RoHS Status RoHS compliant

TUSB6015IZQE 5 mm x 5 mm Pin Configuration Guide

Pin configuration for TUSB6015IZQE (5 mm x 5 mm package). Pin numbering, functions, and connection diagrams are defined in the manufacturer datasheet. Refer to it for the exact footprint and soldering guidelines.

5 mm x 5 mm package pinout diagram for TUSB6015IZQE

No detailed pinout data available for TUSB6015IZQE.

Refer to the datasheet for full pin configuration.

Typical Applications

TUSB6015IZQE is suitable for 6 applications: Portable USB Storage Bridge, Multifunction USB Peripherals, Industrial Data-Acquisition Equipment, USB Test and Measurement, Embedded USB Host Appliances, Secure USB Connectivity.

📱

Portable USB Storage Bridge

The TUSB6015IZQE fits portable storage products that need one USB 2.0 high-speed controller to manage both peripheral and embedded-host behavior. Its high-speed role support can be used when a product reads from or writes to removable media, connects to a host as a USB peripheral, or switches behavior through firmware. The 5 mm by 5 mm 80-BGA package preserves board area in compact enclosures, while 1.5 V core operation and 1.5 V, 1.8 V, or 3.3 V interface options support mixed-voltage portable systems. The implementation must preserve the recommended USB differential-pair geometry and provide the supply rails required by the manufacturer datasheet.

🔧

Multifunction USB Peripherals

The TUSB6015IZQE is suitable for multifunction peripherals that communicate as a USB high-speed device and also contain an embedded controller capable of managing attached devices. Combining peripheral, embedded-host, and OTG-device roles in one controller reduces the need for separate USB interface devices in space-constrained designs. Its industrial temperature range of -40°C to +85°C supports equipment operated across controlled industrial and commercial environments. Firmware should define role-selection and enumeration behavior clearly, while the PCB layout should follow the manufacturer's high-speed USB routing and power-distribution guidance.

🏭

Industrial Data-Acquisition Equipment

The TUSB6015IZQE can support industrial data-acquisition systems that use USB high-speed links for control, configuration, or sensor transfer. Its USB 2.0 high-speed peripheral role suits a compact instrument that connects directly to a host computer, while the embedded-host and OTG-device functions offer additional firmware-controlled operating options. The -40°C to +85°C specified range accommodates many industrial environments, and the small 5 mm by 5 mm BGA supports panel-mounted or embedded module designs. Designers should confirm connector path length, ground-plane continuity, and ESD strategy against the device implementation guidance.

🖥️

USB Test and Measurement

The TUSB6015IZQE can serve in USB test and measurement equipment where an instrument must behave as a high-speed peripheral, embedded host, or OTG device depending on the test sequence. Consolidating these roles into one 80-BGA controller can simplify software control and reduce board area relative to separate interface devices. The 1.5 V core supply and selectable 1.5 V, 1.8 V, and 3.3 V interface levels allow the controller to fit systems with different external signaling requirements. A production design should verify the exact USB PHY connection method, reference-clock arrangement, and power sequencing against the current manufacturer documentation.

🧩

Embedded USB Host Appliances

The TUSB6015IZQE is applicable to embedded appliances that need to become a USB host while retaining peripheral capability for configuration or maintenance. Its embedded-host role can manage attached USB storage, input, or communication devices, while the OTG role provides a flexible basis for automatic role negotiation. The controller's 80-BGA package is appropriate for compact, high-density boards, but it requires fine-pitch assembly capability and careful power-plane construction. Firmware should include safe enumeration and role-transition handling so that the selected operating mode remains predictable during startup and cable changes.

🔒

Secure USB Connectivity

The TUSB6015IZQE can form the interface layer of a USB-connected security or access appliance that exchanges data with a host and controls an attached peripheral. Its three operating roles permit a single design architecture to cover host-to-device communication, service connectivity, and OTG behavior. The industrial temperature specification of -40°C to +85°C supports deployment in protected equipment rooms, and the small BGA footprint leaves more PCB area for security hardware. The board should use controlled-impedance USB routing, robust connector grounding, and the protection approach required by the product's ESD and surge environment.

What is the TUSB6015IZQE?
The TUSB6015IZQE is a Texas Instruments USB 2.0 high-speed OTG dual-role controller in an 80-BGA MICROSTAR JUNIOR package. According to the Texas Instruments manufacturer datasheet, it can operate as a USB high-speed peripheral, an embedded host, or an OTG device. The package measures 5 mm by 5 mm, and the specified operating-temperature range is -40°C to +85°C.
What are the key specifications of TUSB6015IZQE that engineers should know?
The TUSB6015IZQE is a USB 2.0 high-speed dual-role controller with a 1.5 V core supply, 1.5 V, 1.8 V, and 3.3 V interface levels, and an 80-ball BGA package. According to the Texas Instruments manufacturer datasheet, it supports peripheral, embedded-host, and OTG-device roles. Its 5 mm by 5 mm package and -40°C to +85°C operating range are important constraints when planning a compact industrial or portable design.
Where can I download the TUSB6015IZQE datasheet PDF?
The TUSB6015IZQE datasheet PDF is available from the manufacturer-document listing linked on this page. According to the Texas Instruments manufacturer datasheet, the document describes the USB 2.0 high-speed peripheral, embedded-host, and OTG-device functions, along with electrical characteristics and the 80-BGA pin configuration. Use the document-number and pin-description tables when laying out the PCB.
Where can I find the TUSB6015IZQE pinout?
The TUSB6015IZQE pinout is defined in the Texas Instruments manufacturer datasheet, which identifies the connections for the 80-BGA MICROSTAR JUNIOR package. Use the package ball table and recommended application diagram when assigning USB, power, ground, clock, and control nets. Because an 80-ball BGA has many power and ground balls, verify every ball assignment against the current device revision before release.
What USB operating modes does the TUSB6015IZQE support?
The TUSB6015IZQE supports three USB 2.0 high-speed operating roles: peripheral, embedded host, and OTG device. According to the Texas Instruments manufacturer datasheet, this dual-role capability allows one controller to support a compact product that must connect to a host, initiate host transfers, or negotiate OTG behavior. Firmware and application requirements determine which role should be enabled in each operating condition.
Is the TUSB6015IZQE suitable for industrial equipment?
The TUSB6015IZQE is suitable for many industrial and embedded applications because its specified operating-temperature range is -40°C to +85°C. According to the Texas Instruments manufacturer datasheet, the device integrates USB 2.0 high-speed peripheral, embedded-host, and OTG-device functions. Qualification for a particular industrial product still depends on system-level environmental, EMC, and lifecycle requirements.
What is the supply voltage of TUSB6015IZQE?
The TUSB6015IZQE uses a 1.5 V core supply and supports 1.5 V, 1.8 V, and 3.3 V interface signaling. According to the Texas Instruments manufacturer datasheet, the applicable power rails must be designed to meet the controller's core and I/O requirements. Use the datasheet power-supply diagram to determine rail sequencing and the required bypass components for the 80-BGA package.
What package does the TUSB6015IZQE use?
The TUSB6015IZQE uses an 80-pin BGA MICROSTAR JUNIOR package measuring 5 mm by 5 mm. According to the Texas Instruments manufacturer datasheet, it is a surface-mount package intended for compact USB controller designs. The board design must accommodate fine-pitch BGA assembly, power and ground via distribution, and the USB differential-pair routing required by the selected connector.
TUSB6015IZQE vs TUSB6015IZQER - what is the difference?
The TUSB6015IZQE and TUSB6015IZQER identify the same Texas Instruments device family, but their ordering codes indicate different delivery formats. The TUSB6015IZQE is listed as tray packaging, while the TUSB6015IZQER is the tape-and-reel ordering option. For an existing production PCB, confirm that the package drawing, pinout, electrical behavior, and temperature grade match before substituting one ordering code for the other.
What can replace TUSB6015IZQE?
No independently verified pin-compatible replacement was identified for the TUSB6015IZQE. A suitable substitute must use the same 80-BGA MICROSTAR JUNIOR footprint and preserve the USB 2.0 high-speed peripheral, embedded-host, OTG-device behavior, power levels, and pin assignments. The TUSB6015IZQER is the closest ordering variant identified, but it differs in delivery format and should be treated as an orderable variant rather than a second-source replacement.
Is TUSB6015IZQE the same as a generic USB host controller?
The TUSB6015IZQE is more specialized than a basic USB host controller because it combines peripheral, embedded-host, and OTG-device functions in one USB 2.0 high-speed device. According to the Texas Instruments manufacturer datasheet, those three roles support flexible product architecture. A generic controller may implement only host functionality and therefore may not preserve the same firmware model or pin-level behavior.
When should I choose TUSB6015IZQE for a USB design?
Choose the TUSB6015IZQE when a compact design needs one controller to support USB 2.0 high-speed peripheral, embedded-host, and OTG-device roles. The 1.5 V core supply and selectable 1.5 V, 1.8 V, or 3.3 V interface levels support mixed-voltage designs, while the 5 mm by 5 mm BGA saves board area. It is less suitable when a simpler single-role USB interface is sufficient.
Where to buy TUSB6015IZQE online?
Use the Request a Quote form on this page to request TUSB6015IZQE supply, current availability, and delivery terms. The part is identified as an 80-BGA MICROSTAR JUNIOR USB 2.0 high-speed OTG dual-role controller from Texas Instruments. The form allows an engineer to request the exact tray ordering code without relying on a generic or family-level listing.
What is the price of TUSB6015IZQE?
The current price of TUSB6015IZQE is not stated in static product text. Use the Request a Quote form on this page to request current pricing for the exact 80-BGA tray ordering code. The request should specify the required quantity and delivery destination so that availability and commercial terms can be evaluated for the specific production plan.
What is the lead time and stock status of TUSB6015IZQE?
Current stock and lead time for TUSB6015IZQE should be requested through the Request a Quote form on this page. The component is specified as a tray-packaged, 80-BGA MICROSTAR JUNIOR device from Texas Instruments, so a complete order request should identify the exact MPN and quantity. Avoid accepting a family-level flash-controller substitution without package and pin verification.

Engineering reference data for TUSB6015IZQE — comparison, design guidance, and compliance information.

Selection Guide

Choose the TUSB6015IZQE when a compact product needs a single controller for USB 2.0 high-speed peripheral, embedded-host, and OTG-device operation. Its 5 mm by 5 mm 80-BGA package is attractive for space-constrained portable or industrial products, and the 1.5 V core plus selectable 1.5 V, 1.8 V, and 3.3 V interface levels support mixed-voltage architectures. The TUSB6015IZQER is the closest ordering variant identified when reel-based production presentation is required, but it is not an independent second source. Do not select a generic USB host controller unless its PHY, pin assignments, firmware behavior, voltage levels, and operating-temperature requirements have been verified against the complete ball map. If the design needs only one USB role and does not require OTG negotiation, a simpler controller may reduce cost and implementation effort.

Comparison with Alternatives

Parameter This Product
Package 80-BGA MICROSTAR JUNIOR (5 mm x 5 mm)
Brand Texas Instruments
Device Type USB 2.0 high-speed OTG dual-role controller
Core Supply Voltage 1.5 V
Interface Supply Voltages 1.5 V, 1.8 V, and 3.3 V
Operating Temperature Range -40°C to +85°C
Peripheral Role Supported
Embedded Host Role Supported
OTG Device Role Supported
RoHS Status RoHS compliant

Key Differentiators

  • Single-controller support for three USB roles (vs TUSB6015IZQER)
  • Compact high-density package (vs Generic 80-pin USB controllers)
  • Mixed-voltage interface support (vs Single-voltage USB controllers)

Design Notes

Route the USB differential pair as a controlled-impedance, tightly coupled pair with minimal vias and no unnecessary stubs. Keep the pair away from switching-power nodes and other high-current paths, and provide a continuous reference plane beneath the route. Use the Texas Instruments manufacturer datasheet layout guidance to determine whether an external PHY is required and to preserve the recommended connector-to-controller topology.

Confirm the 1.5 V core rail and the applicable 1.5 V, 1.8 V, or 3.3 V interface rails before assigning I/O levels. Place the required bypass capacitors close to the associated power balls, and use a power plane with multiple connections where the 80-BGA package provides repeated ground balls. Check rail tolerances and sequencing against the current manufacturer electrical-characteristics table.

Design the PCB for 80-ball BGA assembly, including compatible pad geometry, solder-mask design, and inspection access. Preserve sufficient copper around thermal and power-distribution balls, and use stitching vias to connect ground planes where practical. Because a ball-grid package is difficult to visually inspect, assembly-plan and solder-process validation are important before volume production.

Do not substitute a generic USB host controller without checking USB role coverage, PHY architecture, voltage levels, firmware requirements, and the complete ball map. The TUSB6015IZQE combines peripheral, embedded-host, and OTG-device behavior in an 80-BGA package; matching only the connector interface or advertised USB speed does not establish drop-in compatibility.

Compliance Information

RoHS
Compliant
REACH
Unknown
AEC-Q100
Unknown
Lead Free
Unknown
Halogen Free
Unknown
Conflict Minerals
Unknown

RoHS-compliant status is stated in the manufacturer-related part listing. Other compliance declarations are not established by the available product information.

Data verified on: 2026-11-16 — data verified and curated by XAIPART's component engineering team

Related Searches

TUSB6015IZQE datasheet TUSB6015IZQE datasheet pdf TUSB6015IZQE pinout TUSB6015IZQE specifications Texas Instruments TUSB6015IZQE TUSB6015IZQE 80 BGA TUSB6015IZQE USB 2.0 HS TUSB6015IZQE OTG controller TUSB6015IZQE equivalent TUSB6015IZQE replacement TUSB6015IZQE price TUSB6015IZQE stock TUSB6015IZQE vs TUSB6015IZQER

Related Components & Terms

Texas Instruments TUSB6015IZQE TUSB6015IZQER TUSB6015 USB 2.0 USB high-speed USB On-The-Go OTG dual-role controller USB peripheral controller USB embedded host controller USB interface IC bus controller interface IC semiconductor 1.5 V core supply 1.8 V interface 3.3 V interface 80-BGA MICROSTAR JUNIOR BGA package surface-mount package USB differential pair controlled impedance industrial temperature range flash-memory bridge
Quick Quote RFQ
Fill in complete details — our sales team will respond within 24 hours
Part Number Manufacturer Package QTY Target Price Extended
✓
Quote submitted!

We will respond to your email within 24 hours

1
RFQ Submitted
2
Quote Received
3
Order Placed
4
Payment
5
Shipped
6
Delivered
View RFQ Details