XC7A200T-L2FBG484E - 215K Cell Artix-7 FPGA | AMD
MPN: XC7A200T-L2FBG484E ✓ ActiveXC7A200T-L2FBG484E Overview
An FPGA is a programmable semiconductor containing configurable logic, block RAM, digital signal processing resources and programmable input/output circuitry. Within the product hierarchy, the XC7A200T is an Artix-7 FPGA, an FPGA and CPLD, and ultimately a programmable-logic semiconductor. This combination places substantial fixed-function capability on a single device while allowing the hardware architecture to be updated through programmable configuration rather than a redesigned circuit board.
The XC7A200T-L2FBG484E provides 215,360 logic cells, 285 user I/Os and 394 DSP slices. Its -2 speed designation identifies the device's performance grade, while the E suffix identifies the ordered temperature-grade variant. The FBG484 package exposes 484 balls in an FCBGA land pattern. Integrated design resources include MMCM and PLL blocks for clock generation and phase management, supporting deterministic clocking in communication, control and processing systems.
At the architecture level, the 28 nm Artix-7 platform balances programmable logic density with power efficiency. The 1,286 MHz maximum clock figure represents the advertised operating ceiling rather than a guarantee that every design can close timing at that frequency. Actual performance depends on the selected clocking architecture, logic utilization, routing congestion, I/O standards, power conditions and timing constraints. The nominal 0.9 V core voltage also requires careful power-plane design and decoupling.
Typical uses include industrial automation, test and measurement equipment, embedded video processing, communications infrastructure and high-speed digital control. The 285 I/Os permit substantial external connectivity, while the large logic and DSP resources support parallel pipelines, protocol handling and real-time processing. Engineers should also consider the GT transceiver resources, memory interfaces and supported I/O standards when assigning the device's bank architecture.
A practical design priority is complete bank-level power planning. Validate every VCCO and VCCA supply independently, follow the recommended decoupling network and connect every defined power ball in the package footprint. Verify high-speed routing against the relevant AMD design guidance, especially for memory interfaces and differential pairs, because the ball count does not by itself imply that arbitrary pin assignments will meet timing.
This product page combines package-specific sourcing information, same-footprint Artix-7 alternatives and engineering guidance for FPGA integration. It emphasizes the distinctions that determine replacement feasibility: package land pattern, logic density, speed grade, temperature grade, I/O count and power architecture.
Drop-in alternatives for XC7A200T-L2FBG484E — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.
Variants in this series
Same-series models that are drop-in compatible with XC7A200T-L2FBG484E (same form factor and footprint) — differing in Package, Logic Cells, Speed Grade, Device Type, Clock Management.
XC7A200T-2FBG484I
✅ Drop-In✓ In Stock
$89.15 / Unit
View Datasheet →XC7A200T-2FBG484C
✅ Drop-In✓ In Stock
$320 / Unit
View Datasheet →XC7A200T-3FBG484E
✅ Drop-InContact for price
View Datasheet →XC7A200T-1FBG484C
✅ Drop-In ⚠️ Specs UnverifiedContact for price
View Datasheet →XC7A200T-3FBG484E
✅ Drop-InContact for price
View Datasheet →XC7A200T-L2FBG484E Maximum Ratings & Electrical Characteristics
| Device Type | Artix-7 FPGA |
| Logic Cells | 215,360 cells |
| User I/O | 285 I/Os |
| DSP Slices | 394 slices |
| Maximum Clock Frequency | 1,286 MHz |
| Process Technology | 28 nm |
| Nominal Core Voltage | 0.9 V |
| Package Type | 484-ball FCBGA |
| Package Designation | FBG484 |
| Package Pin Count | 484 balls |
| Speed Grade | -2 |
| Temperature-Grade Suffix | E |
| Clock Management | MMCM and PLL resources |
| GT Transceiver Channels | 4 channels |
| Mounting Type | Surface Mount |
XC7A200T-L2FBG484E 484 balls Pin Configuration Guide
Pin configuration for XC7A200T-L2FBG484E (484 balls package). This digital IC includes GPIO, communication interfaces (UART, SPI, I2C), and power pins. Refer to the manufacturer datasheet for alternate pin functions and configuration options. Essential for embedded system design and PCB layout.
No detailed pinout data available for XC7A200T-L2FBG484E.
Refer to the datasheet for full pin configuration.
Typical Applications
XC7A200T-L2FBG484E is suitable for 6 applications: Industrial Automation and Control, Test and Measurement Equipment, Embedded Video Processing, Communication and Protocol Processing, Aerospace and Defense Control Systems, Network and Storage Systems.
Industrial Automation and Control
The XC7A200T-L2FBG484E fits industrial automation controllers that combine sequencing, machine monitoring and real-time signal processing. Its 215,360 logic cells provide ample parallel capacity, while 285 I/Os support digital sensors, actuators, encoders and industrial interfaces. The -2 speed grade and nominal 0.9 V core supply support deterministic processing, but the equipment temperature range must be compared with the E-grade ordering suffix. Designers should validate VCCO, VCCA and auxiliary-supply domains independently and follow the FBG484 land pattern so the controller can be assembled and serviced without package-conversion penalties.
Recommended
Test and Measurement Equipment
The XC7A200T-L2FBG484E is suitable for parallel test systems, waveform processing and protocol-analysis instruments where multiple acquisition and logic paths must operate concurrently. Its 215,360 logic cells can host control state machines, sequencing engines and data-processing pipelines, while 394 DSP slices support high-throughput arithmetic. The advertised 1,286 MHz maximum clock should be treated as a device ceiling rather than a guaranteed system rate; timing closure depends on routing and logic utilization. For laboratory equipment, pay particular attention to clean clock distribution, separate analog and digital supply domains and controlled impedance for high-speed acquisition interfaces.
Recommended
Embedded Video Processing
The XC7A200T-L2FBG484E can serve as the programmable processing core in embedded video systems requiring parallel pixel manipulation, timing generation and interface control. Its 285 I/Os provide substantial connectivity for video timing, control signals and external memory, while the 394 DSP slices accelerate fixed-point filtering and arithmetic. The device must be paired with a board-level solution that supports its FBG484 footprint and manages the required power rails. Because video timing tolerance is often tighter than general control timing, use the AMD FBG484 pinout and design guidance to place memory and high-speed interfaces for predictable routing and signal integrity.
Recommended
Communication and Protocol Processing
The XC7A200T-L2FBG484E is appropriate for communication equipment that combines framing logic, packet processing, clocking and parallel data paths. Its large programmable-logic fabric permits dedicated pipeline architectures, while MMCM and PLL resources support controlled clock generation. The package also includes the Artix-7 transceiver resources associated with high-speed serial connectivity, making the device relevant to mixed serial-and-parallel designs. Designers should assign banks according to voltage and supported I/O standards, implement the specified power sequencing and validate the 0.9 V core supply across temperature. Board-level equalization and connector implementation must be developed separately for each external interface.
Recommended
Aerospace and Defense Control Systems
The XC7A200T-L2FBG484E can support programmable avionics, guidance and mission-control subsystems where substantial logic and DSP capacity must be combined in one package. The 215,360 logic cells support redundant control, monitoring and interface logic, and the 394 DSP slices accelerate filtering and control arithmetic. The target's E ordering suffix must be checked against the full environmental envelope required by the program; it does not by itself establish complete aerospace qualification. Configuration storage, power behavior, radiation requirements and functional-safety assurance are system-level responsibilities. Package assembly and inspection should follow the applicable BGA quality process and the exact FBG484 footprint.
Recommended
Network and Storage Systems
The XC7A200T-L2FBG484E fits network appliances, storage controllers and interface concentrators that require parallel data movement, protocol termination or low-latency programmable logic. Its 285 I/Os allow substantial parallel connectivity, while the programmable fabric can be adapted to different buffering, compression or storage-interface control requirements. The nominal 0.9 V core and 28 nm Artix-7 architecture can support efficient implementation, but actual throughput depends on memory bandwidth, pipeline structure and external transceiver performance. Use short, properly referenced routes for memory interfaces, keep high-speed and sensitive nets away from noisy power regions, and validate every power ball against the AMD package documentation before releasing the PCB.
Recommended
Recommended Products Summary
Engineering reference data for XC7A200T-L2FBG484E — comparison, design guidance, and compliance information.
Selection Guide
Comparison with Alternatives
| Parameter | This Product | XC7A200T-2FBG484I | XC7A200T-2FBG484C | XC7A200T-3FBG484E | XC7A200T-1FBG484C |
|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD |
| Package | FBG-484 FCBGA | FBG-484 FCBGA - same | FBG-484 FCBGA - same | FBG-484 FCBGA - same | FBG-484 FCBGA - same |
| Logic Cells | 215,360 cells | 215,360 cells | 215,360 cells | 215,360 cells | 215,360 cells |
| User I/O | 285 I/Os | 285 I/Os | 285 I/Os | 285 I/Os | 285 I/Os |
| DSP Slices | 394 slices | 394 slices | 394 slices | 394 slices | 394 slices |
| Process Technology | 28 nm | 28 nm | 28 nm | 28 nm | 28 nm |
| Nominal Core Voltage | 0.9 V | 0.9 V | 0.9 V | 0.9 V | 0.9 V |
| Speed Grade | -2 | -2 - same | -2 - same | -3 - faster | -1 - slower |
| Temperature-Grade Suffix | E | I - industrial | C - commercial | E - same suffix | C - commercial |
Key Differentiators
- Matches the -2 performance grade while retaining the FBG484 footprint (vs XC7A200T-2FBG484I)
- Higher speed option without changing the logic density or package (vs XC7A200T-1FBG484C)
- Faster -3 alternative is available for timing-constrained upgrades (vs XC7A200T-3FBG484E)
Design Notes
Plan the power tree around the separate 0.9 V core, VCCO and VCCA supply domains shown in the AMD package documentation. Assign every power and ground ball in the FBG484 footprint and connect the required voltage rails directly to their appropriate planes. Place local high-frequency decoupling close to the device and keep switching-supply return paths away from sensitive clock and I/O references. Validate sequencing, voltage tolerance and ripple against the manufacturer limits before releasing the board.
Use the AMD FBG484 package pinout files as the authoritative assignment table rather than a generic BGA symbol. Check ball-to-ball differences, configuration pins, unused balls and exposed power connections during schematic review. Keep high-speed memory and serial interfaces on their intended banks, preserve the recommended ball escapes and confirm stack-up and impedance targets with the PCB fabricator. A footprint that appears visually similar can still create routing or assembly problems when hidden or missing balls are treated incorrectly.
Route clock, memory and other high-speed interfaces with continuous reference planes, matched via structures and no unnecessary stub branches. The 1,286 MHz maximum clock is an architectural device rating, not a guaranteed operating frequency for every design; routing congestion and logic depth can reduce achievable performance. Run timing analysis after placement and again after routing, and use the clocking resources to remove or control skew before treating the design as timing-closed.
Compliance Information
The exact E-grade ordering suffix does not by itself establish AEC-Q100 qualification. Confirm RoHS, REACH, lead-free and halogen-free declarations using the AMD product documentation for the specific ordering code.