Circuitos Integrados

S9S12VR48AF0VLF

S9S12VR48AF0VLF - MagniV 16-bit MCU, 48KB Flash, 25MHz, LQFP-48 | NXP

The NXP S9S12VR48AF0VLF is a MagniV 16-bit S12 microcontroller with 48KB Flash, 25MHz CPU clock, and integrated LIN physical interface plus low-side/high-side drivers in a 48-pin LQFP (7x7mm) package. It is AEC-Q100 automotive qualified and rated for -40C to +105C operation, targeting 12V relay-driven DC motor control applications such as automotive body electronics. A microcontroller (MCU) is a single-chip computer containing a CPU core, volatile memory (RAM), non-volatile program memory (Flash/ROM), and integrated peripherals such as timers, ADCs, communication controllers, and GPIO. The MagniV family specifically combines the HCS12 16-bit CISC CPU core with high-voltage analog interfaces, allowing direct connection to 12V automotive buses without external level shifters. This integration reduces PCB area and BOM cost in body and chassis ECUs. Key features of the S9S12VR48AF0VLF include 48KB on-chip Flash program memory, 2KB RAM, 512 bytes EEPROM, a 6-channel 10-bit ADC, an integrated 5V regulator for sensor supply (EVDD), a LIN physical interface compliant with LIN 2.x, high-side and low-side drivers for relay/motor loads, and high-voltage input pins tolerant of 12V battery transients. The 12V1 S12 core delivers deterministic interrupt latency suitable for time-critical body-control tasks. The S12VR architecture pairs an enhanced HCS12 CISC core with mixed-signal high-voltage I/O, enabling direct connection to automotive switch panels, sensors, and actuators. Integrated gate drivers and current-sense paths support H-bridge and half-bridge topologies for small DC motors, while the on-chip 5V regulator (EVDD) powers external Hall-effect sensors without an external LDO. The 25MHz bus clock yields sufficient throughput for LIN scheduling, PWM generation, and ADC post-processing in body modules. Typical applications include automotive window lift, sunroof, seat control, HVAC flap actuators, mirror adjustment, and lighting modules where a small-footprint LIN node must drive relays or brushed motors. The integrated high-side/low-side drivers and 12V-tolerant inputs eliminate the need for many discrete components. When designing with this MCU, ensure adequate PCB copper for thermal dissipation of the integrated drivers (refer to the manufacturer's thermal model), and place bypass capacitors within 5mm of the EVDD and VDDR pins. The LIN bus pin requires a pull-up and protection network per the LIN physical layer specification. This page synthesizes distributor pricing, AEC-Q100 qualification details, application examples, and drop-in alternatives that are not collected in a single view in the manufacturer datasheet, supporting faster design decisions for 12V body-control nodes.

USD $4,85 Em estoque

S9S12VR48F2CLF

S9S12VR48F2CLF - 48KB Flash S12 MagniV MCU 25MHz | NXP

The NXP S9S12VR48F2CLF is a 16-bit S12 MagniV microcontroller featuring 48KB Flash, 25MHz CPU core, and integrated LIN physical interface and high-/low-side drivers for relay-driven DC motor control in automotive and industrial body applications. The device is housed in a 48-pin LQFP package (7x7mm) and is qualified to AEC-Q100 for automotive environments, rated for -40C to +85C operation with a 9V-15V supply tolerance suitable for direct 12V vehicle bus connection. It belongs to the S12VR family designed for the smallest, most efficient scalable relay-driven DC motor control solution, integrating the S12 core, LIN PHY, and high-/low-side drivers on-chip. MagniV microcontrollers combine a microcontroller with mixed-signal companion functions on a single die, eliminating the need for external power management and driver ICs. The S12VR is specifically architected for body-electronics and relay-driven motor applications such as window lift, sunroof, seat control, HVAC flaps, and similar brushed DC loads. Its on-chip 5V regulator (EVDD) supplies external sensors, while the high-voltage inputs accept direct 12V battery switching signals. Key features include 48KB on-chip Flash, 2KB RAM, 25MHz HCS12 CISC CPU core, integrated LIN 2.x physical interface, configurable high-side and low-side driver outputs capable of driving relay coils and small DC motors, 12V-tolerant high-voltage digital inputs for direct switch contact reading, internal 5V regulator (EVDD) for sensor supply, and integrated oscillator with PLL. The S12 core provides a familiar HCS12 instruction set with BDM (Background Debug Mode) for in-circuit development. The 48-LQFP package gives a compact 7x7mm footprint with standard surface-mount assembly. Typical applications include automotive window lift, sunroof control, power seat adjustment, HVAC damper/door actuators, fuel lid/trunk release, door lock modules, and industrial relay/motor control. The integrated LIN PHY enables the device to serve as a slave node in a LIN bus body controller network. The AEC-Q100 qualification supports deployment under the hood or in cabin modules subject to automotive temperature and EMC requirements. When designing with the S9S12VR48F2CLF, ensure PCB layout separates the high-current relay/motor outputs from sensitive analog reference ground, place adequate bulk capacitance on the 12V battery input to handle motor inrush, and follow NXP's reference design for PCB thermal spreading on the exposed pad. The integrated high-side/low-side drivers substantially reduce BOM count versus discrete MCU+driver architectures, which is the principal economic justification for selecting the S12VR family. This page synthesizes distributor pricing across three sources, identifies drop-in and same-package alternatives within the S12VR family, and consolidates design notes not duplicated on any single distributor page for engineers evaluating this part for relay-driven motor control.

USD $3,10 Em estoque

S9S12XF384J2MLMR

S9S12XF384J2MLMR - 16-bit S12X FlexRay MCU 384KB | NXP

The NXP Semiconductors S9S12XF384J2MLMR is a 16-bit automotive microcontroller built on the S12X (CPU12) architecture, integrating 384KB of Flash program memory, 24KB of RAM, and a FlexRay communication controller in a 112-pin LQFP (QFP, S-PQFP-G112) package with gull-wing terminals at 0.65mm pitch. It is automotive qualified and rated for -40C to +125C operation. A microcontroller (MCU) is a single-chip computer that combines a processor core, memory, and peripherals on one die, sitting at the lowest level of the embedded-systems hierarchy: MCU -> embedded processor -> semiconductor device. The S12X family from NXP (originally Freescale) targets distributed control, where many low-cost nodes share network traffic rather than one central computer. Key differentiating features of this part include the XGATE coprocessor, which offloads communication and interrupt handling from the main CPU12 core to keep real-time control loops deterministic, and the integrated FlexRay controller for time-triggered, fault-tolerant in-vehicle networking. The 384KB on-chip Flash provides ample room for protocol stacks and diagnostic layers (UDS/OBD), while the automotive temperature grade supports underhood and body electronics exposed to harsh environments. Technically, the S12XF family belongs to the HCS12/S12X lineage: a 16-bit CISC core with an enhanced instruction set, peripheral co-processing via XGATE, and a peripheral set typically including CAN, SCI/SPI, ADC, timer/PWM modules. Distributor listings report core operation of up to 40MHz (CPU12) with the device marketed at 50MHz (XGATE), and the family spans memory options from 256KB to 512KB Flash in packages from 64-pin to 112-pin LQFP. Typical applications are FlexRay satellite nodes for body, chassis and safety domains: door modules, seat control, lighting control, suspension sensors, and gateway-assist functions where FlexRay bandwidth and deterministic latency matter. Design consideration: verify the supply-voltage domain (one distributor lists 1.72V-1.98V, another 5V VDD family operation) against the official NXP S12XF datasheet before schematic capture, and confirm EOL/last-time-buy status for new designs. This page synthesizes distributor pricing context, same-family drop-in alternatives, and practical sourcing notes not found on any single datasheet.

Cotação Em estoque

S9S12XS128J1CAE

S9S12XS128J1CAE - 16-bit S12X MCU, 128KB Flash, 40MHz | NXP

The NXP S9S12XS128J1CAE is a 16-bit HCS12X microcontroller built on the enhanced S12X CPU core, delivering 40 MHz performance with 128 KB of on-chip Flash memory in a 64-pin LQFP package (10 mm x 10 mm). Designed for cost-sensitive automotive body electronics, the device integrates 8 KB RAM, a rich peripheral set (including CAN, SCI/SPI, timers, and an A/D converter), and 59 general-purpose I/O ports in a single AEC-Q100 qualified package. Background: A microcontroller (MCU) is a single-chip computer that combines a CPU, memory (Flash/ROM for code, RAM for data), and peripherals on one die. The S12X family from NXP (originally Freescale) extends the classic HCS12 with an enhanced bus architecture and XGATE co-processor option, targeting automotive real-time control. Within the broader hierarchy, S12XS parts sit as automotive-grade MCUs within NXP's S12X platform, itself a branch of 16-bit automotive microcontrollers, and ultimately under the semiconductor / integrated circuit taxonomy. Key differentiating specifications include: 40 MHz CPU clock with single-cycle instructions, 128 KB (128K x 8) Flash, 8 KB RAM, supply voltage 1.72 V - 1.98 V core plus 5 V I/O, operating temperature -40 °C to +85 °C (automotive grade), and 64-pin LQFP (10 x 10 mm) with 0.5 mm pitch for compact body-electronics PCB layouts. The architecture combines a CISC 16-bit S12X core with on-chip debug, BDM (background debug mode), and on-chip voltage regulator. Internal PLL allows flexible clock generation, and the peripheral set includes MSCAN (CAN 2.0A/B), enhanced SCI, SPI, PWM timers, 16-channel A/D, and I2C, providing a single-chip solution for body control modules and sensor interfacing. Typical applications include automotive body controllers, instrument cluster MCUs, lighting and HVAC modules, seat and door-zone controllers, CAN node slaves, and industrial sensor interfaces. The combination of Flash, CAN, and AEC-Q100 grade makes it well-suited to distributed body-electronics networks. When designing, allow at least a 4-layer PCB with proper ground pour for EMC compliance; automotive CAN networks require 120 ohm termination and proper ESD/EMI protection on bus pins. Decouple VDD with 100 nF + 4.7 uF near the pins, and respect the 5 V analog supply routing guidance in the reference manual. This page synthesizes distributor pricing, automotive-grade drop-in alternatives within the S12XS family, and practical EMC/PCB layout notes not found in the standalone datasheet.

USD $5,55 Em estoque

S9S12XS128J1MAE

S9S12XS128J1MAE - 16-bit S12X MCU, 128KB Flash, 40MHz | NXP

The NXP S9S12XS128J1MAE is a 16-bit HCS12X microcontroller with 128 KB of Flash memory, 8 KB of RAM, and a 40 MHz CPU core, housed in a 64-pin LQFP (10x10 mm) package. It is rated for the automotive temperature range of -40C to +125C and qualified for automotive body-electronics applications. The S12X core delivers CISC-style instruction set compatibility with the legacy HCS12 family while adding an XGATE co-processor (peripheral) and enhanced interrupt handling, enabling responsive real-time I/O without overloading the main CPU. An MCU (microcontroller unit) is a single-chip computer that integrates a CPU, non-volatile program memory (Flash), working memory (RAM), and a rich set of peripherals such as timers, ADC, communication controllers, and general-purpose I/O. In the embedded hierarchy, the S12XS family sits within the 16-bit automotive MCU tier (16-bit MCU -> HCS12 family -> S12XS sub-family -> automotive body controller) - typically chosen for cost-sensitive body and chassis modules where 32-bit performance is not required but robust automotive qualification is. Key features include 128 KB on-chip Flash (organized as 128K x 8), 8 KB RAM, 44 GPIO lines, and an integrated CAN (MSCAN) controller, multiple SCI/SPI interfaces, a 10/12-bit ADC, and PWM channels for motor and lighting control. The device operates from a 5 V supply and supports background-debug mode (BDM) for in-circuit programming and debug. The S12XS architecture pairs the main CPU with the XGATE co-processor, a programmable RISC engine that offloads interrupt-driven peripheral servicing. This dual-core approach gives the S9S12XS128J1MAE deterministic I/O response under heavy interrupt load, which is critical for CAN/LIN body networks where missed frames can trigger UDS DTCs. The Flash is split into independent partitions to support EEPROM emulation and bootloader coexistence. Typical applications include automotive body controllers (BCM), HVAC control modules, seat control units, instrument cluster sub-circuits, lighting ECUs, and CAN/LIN gateway nodes. The 64-LQFP footprint is shared across the S12XS family, enabling PCB reuse between derivatives with different Flash sizes. Design considerations include providing a clean 5 V analog/digital supply, decoupling each VDD pin with 100 nF ceramics, reserving the BKGD pin for BDM access, and ensuring the reset pin has proper hold-time capacitor per the S12X reference manual. This page consolidates distributor pricing, pin-compatible S12XS-family alternatives, and practical design notes that complement - not duplicate - the manufacturer datasheet.

USD $2,97 Em estoque

S9S12XS128J1VAE

S9S12XS128J1VAE - 16-bit 40MHz 128KB Flash MCU | NXP

The NXP Semiconductors S9S12XS128J1VAE is a 16-bit automotive microcontroller built on the S12X (HCS12X) CISC core, delivering 40 MHz bus performance, 128KB of on-chip Flash memory, and an operating temperature range of -40C to +105C in a 64-pin LQFP (10x10 mm) package. The part is automotive qualified and optimized for cost-sensitive body electronics applications. A microcontroller (MCU) is a single-chip computer that integrates a processor core, memory, and peripherals on one die, sitting within the broader hierarchy of embedded processors: MCU -> embedded processor -> semiconductor integrated circuit. The S12XS family descends from the widely adopted Freescale HCS12 architecture, now manufactured and supported by NXP Semiconductors, providing long-term availability for automotive platforms. Key features include the 16-bit S12X CISC core operating at 40 MHz, 128KB (128K x 8) of Flash program memory, integrated automotive-grade peripherals, and full functionality across the -40C to +105C temperature range required by under-hood and in-cabin automotive environments. The 64-LQFP surface-mount package with gull-wing terminals supports standard automated assembly. Architecturally, the S12XS family emphasizes scalability, hardware and software reusability, and platform compatibility across a broad array of automotive electronics platforms, allowing a single design to scale across Flash densities within the same footprint and pinout. Typical applications include automotive body electronics such as door modules, seat control, lighting control, window lifter modules, and HVAC controllers, where cost sensitivity and automotive qualification are primary selection criteria. When designing with this device, verify Flash density requirements against projected code growth, since the S12XS family offers pin-compatible migration paths between 64KB, 128KB, and larger densities in the same 64-LQFP package. This page synthesizes distributor pricing, drop-in alternatives within the S12X family, and practical design notes not found in the manufacturer datasheet.

USD $4,90 Em estoque

S9S12XS256J0CAA

S9S12XS256J0CAA - 16-bit 40MHz Automotive MCU | NXP

The NXP S9S12XS256J0CAA is a 16-bit automotive microcontroller built on the S12X (HCS12X) CISC core, running at up to 40 MHz with 256KB of Flash program memory, 12KB of RAM, and 59 general-purpose I/O lines, housed in an 80-pin QFP (14x14 mm) package. It is automotive qualified and rated for operation from -40C to +85C at a 5V supply. A microcontroller (MCU) is a single integrated circuit that combines a processor core, program memory, data memory, and peripheral functions such as timers, communication interfaces, and analog-to-digital converters on one chip. Within the product hierarchy, the S9S12XS256J0CAA belongs to the microcontroller class of embedded processors, specifically 16-bit MCUs optimized for embedded control rather than high-throughput application processing. Key differentiating features of this part include its cost-optimized S12X architecture targeting automotive body electronics, its 256KB on-chip Flash enabling single-chip designs without external memory, and its automotive qualification supporting direct deployment in vehicle platforms. The 40MHz bus operation provides ample real-time headroom for control loops, while the rich I/O count of 59 pins supports multiple switch, lamp, and actuator interfaces typical of body control modules. Technically, the S12XS family maintains a high level of pin compatibility with the S12XE family, according to the NXP MC9S12XS256 reference manual, which enables hardware and software reuse across automotive electronics platforms. Up to 18 additional I/O ports feature interrupt capability, allowing wake-up from stop or wait low-power modes - an important capability for battery-connected automotive modules that must minimize quiescent current. Typical applications include automotive body control modules, door and seat control units, lighting control, HVAC blowers, window lifters, and other cost-sensitive in-vehicle electronic control units where robust 5V logic and flash scalability matter. When designing with this MCU, budget your flash requirements against the family scalability options (128KB to 512KB in the S12XS line) and verify that the -40C to +85C ambient rating matches your under-hood or in-cabin placement; higher-temperature placements require a different grade. This page synthesizes distributor pricing, drop-in alternatives, and practical design guidance not found in the manufacturer datasheet, providing engineers a single citable reference for the S9S12XS256J0CAA.

USD $4,05 Em estoque

S9S12XS256J0CAE

S9S12XS256J0CAE - 16-bit HCS12X MCU, 256KB Flash, 64-LQFP | NXP

The NXP S9S12XS256J0CAE is a 16-bit HCS12X microcontroller built on an enhanced S12X core, integrating 256KB of on-chip Flash program memory, 12KB of RAM, and 44 general-purpose I/O lines in a 64-pin LQFP (10x10 mm) package. It runs at a 40 MHz bus clock, targeting cost-sensitive automotive body electronics where CAN, SCI, and SPI connectivity are required alongside PWM, watchdog, LVD, and POR peripherals. The S12X architecture adds a co-processor XGATE module that offloads interrupt-driven tasks from the main CPU, allowing deterministic real-time response in body control modules and gateway nodes. An HCS12 microcontroller is a member of the 16-bit automotive MCU family that evolved from the original Motorola/Freescale HC12 architecture; the S12X variant extends the original 16-bit core with a peripheral co-processor and an enhanced instruction set, slotting between legacy 8-bit MCUs and 32-bit ARM Cortex devices in the automotive electronics taxonomy (automotive MCU -> 16-bit MCU -> HCS12 family -> S12X core). Within the broader semiconductor taxonomy, the S12XS family sits under NXP's Kinetis/S12/S08 automotive portfolio and is widely deployed where deterministic CAN-bus communication, integrated analog, and AEC-Q100 qualification are mandatory. Key features include 256KB single-cycle Flash with erase-sector protection, 12KB SRAM supporting byte-wise access, four PWM channels for motor or LED driving, a CAN 2.0A/B controller, dual SCI (UART) modules for LIN master/slave bridging, and an SPI port for digital sensors or external peripherals. The 40 MHz core delivers 40 MIPS of integer throughput while keeping active current low enough for body modules that remain partly energized in vehicle sleep states, and a hardware cryptographic random-number generator assists with secure-key storage on SEAWARD-style anti-theft immobilizers. The device is qualified to AEC-Q100 grade 2 (-40 to +105 °C ambient-equivalent) with -40 to +85 °C operating temperature, and supports both 5V-tolerant I/O and 3.3V/5V mixed-signal designs. Its on-chip XGATE co-processor and DMA-driven peripheral set enable simultaneous CAN message handling and high-rate PWM without CPU intervention, making the part suited to multi-load body controllers and instrument clusters where deterministic latency is essential. Typical applications include automotive body control modules (BCM) coordinating lighting, wipers, and door locks via CAN/LIN, HVAC blower motor control using PWM and ADC feedback, instrument-cluster stepper driving, and CAN gateway nodes bridging body and powertrain segments. The S12XS family's combination of Flash size, integrated CAN, and automotive qualification also addresses ride-height controllers, smart junction boxes, and seat-control modules. When designing with S9S12XS256J0CAE, allocate a 4.7 µF or larger bulk decoupling capacitor near each VDD pair and keep the BDM/debug trace under 50 mm to preserve signal integrity for in-circuit debugging; note that selecting the J suffix device limits the upper operating temperature to 85 °C, so underhood designs should instead use the C-grade variant. This page synthesizes real-time distributor pricing, drop-in same-package alternatives, and practical design notes not found in the manufacturer datasheet alone.

USD $11,40 Em estoque

S9S12XS64J1MAE

S9S12XS64J1MAE - 16-bit MCU, 64KB Flash, 40MHz, S12X | NXP

The NXP S9S12XS64J1MAE is a 16-bit HCS12X microcontroller with 64KB Flash, 40MHz CPU speed, and 44 I/O pins, housed in a 64-pin LQFP (10x10 mm) package. The device operates across an automotive-grade temperature range of -40C to +125C and integrates CANbus, SCI, and SPI connectivity peripherals. What is an HCS12X microcontroller? The HCS12X is a 16-bit CISC microcontroller core from NXP, evolving from the original HC12 architecture. It belongs to the broader 16-bit MCU category, sitting between 8-bit MCUs and 32-bit ARM Cortex-M devices in the embedded computing hierarchy. S12X parts typically target cost-sensitive automotive body electronics, offering on-chip peripherals (CAN, PWM, timers) and Flash memory for firmware storage. Key features of the S9S12XS64J1MAE include 64KB (64K x 8) of Flash program memory, 4KB of RAM, an integrated LVD/POR/PWM/WDT peripheral set, and 44 general-purpose I/O pins. The 40MHz bus speed delivers sufficient throughput for body-control, sensor-fusion, and LIN/CAN slave-node applications while keeping active power modest. The S9S12XS64J1MAE uses the HCS12X CISC core with enhanced XGATE co-processor support in the wider S12XS family, allowing deterministic peripheral handling. The 5V-tolerant I/O and automotive qualification make it well-suited to operate alongside analog drivers in mixed-signal body modules without external level shifters. Typical applications include automotive body control modules, instrument clusters, HVAC panels, lighting controllers, door/window/seat modules, and CAN/LIN slave nodes. The combination of CAN+SCI+SPI connectivity and PWM-driven timers suits motor-control and LED-driver subsystems in vehicles. When designing with this MCU, ensure a robust 5V supply decoupling network and review the NXP S12XS reference manual for port-mux and interrupt-vector assignments. The 64KB Flash budget requires disciplined code-section placement for applications approaching the memory ceiling.

USD $6,20 Em estoque

S9S12XS64J1MAL

S9S12XS64J1MAL - HCS12X 16-bit MCU, 64KB Flash | NXP

The NXP S9S12XS64J1MAL is a 16-bit HCS12X microcontroller with 64KB of Flash memory, 40 MHz CPU clock speed, and a 112-pin LQFP package (20x20 mm). It is AEC-Q100 automotive-qualified for the -40C to +125C operating range and is engineered for cost-sensitive automotive body electronics applications. According to the NXP product page, it integrates an S12X CPU core, enhanced EEPROM, and a peripheral set tuned for body modules such as BCM, lighting controllers, and gateway ECUs. An MCU (microcontroller unit) is a single-chip computer that integrates a CPU core, memory (Flash/ROM, RAM, sometimes EEPROM), and peripherals (timers, ADC, communication blocks like CAN/SPI/UART). The S12X core family extends the HCS12 instruction set with an XGATE co-processor for deterministic I/O and interrupt servicing, enabling real-time response without CPU intervention. Within the broader taxonomy, MCUs sit under microcontrollers, which in turn fall under integrated circuits and the wider semiconductor category. The S12XS sub-family is the cost-optimized member of the S12X family, designed to scale from low-end body modules up through gateway and instrument cluster designs. Key differentiating specifications include 64KB Program Flash, 4KB EEPROM, 6KB RAM, four MSCAN (CAN) modules for automotive networking, an enhanced Capture Timer (ECT) module, up to 91 I/O lines, and an internal 5V supply operating mode. The 112-LQFP package provides robust thermal performance and easy PCB routing for multi-rail automotive designs, and the AEC-Q100 qualification plus wide -40C to +125C temperature grade makes it suitable for under-hood and chassis-mounted modules. The S12X core uses a 16-bit CISC architecture with a 20-bit address bus, supporting linear memory access up to 1MB - more than the HCS12 - while preserving object code compatibility with classic HCS12 parts for design portability. The XGATE peripheral co-processor handles DMA-like data moves and interrupt service routines with deterministic latency, offloading the main CPU so application code can focus on control loops and diagnostics. Typical applications include body control modules, HVAC panels, instrument clusters, lighting controllers, door/seat modules, and CAN-based sensor nodes. The combination of plentiful CAN channels, automotive temperature range, and 64KB of Flash makes the device well matched to mid-range body electronics where both networking and computational headroom are required. When designing with the S9S12XS64J1MAL, ensure the supply rail is regulated within the 2.97V to 5.5V range and that decoupling capacitors are placed close to the multiple VDD/VSS pin pairs to minimize switching noise on sensitive ADC channels. Use the XGATE for time-critical CAN frame handling to free the S12X CPU for diagnostics. This page synthesizes authorized distributor pricing, pin-compatible automotive-grade alternatives, and a comparison table not found on the manufacturer product page, helping procurement and design engineers select the right S12XS variant with confidence.

USD $9,10 Em estoque

S9S12XS64J1VAAR

S9S12XS64J1VAAR - 16-bit S12X MCU, 64KB Flash, 80-QFP | NXP

The NXP (formerly Freescale) S9S12XS64J1VAAR is a 16-bit HCS12X-family automotive-qualified microcontroller built around the S12X CPU core and packaged in an 80-lead LQFP measuring 14 x 14 mm with 0.65 mm pitch. It integrates 64 KB of on-chip Flash, runs at up to 40 MHz bus frequency, and is supplied from a single 1.72 V to 1.98 V rail. With 59 general-purpose I/O lines, the part targets cost-sensitive body and chassis electronic control units where deterministic 16-bit performance is required. A microcontroller (MCU) is a single-chip computer that integrates a CPU, non-volatile program memory (Flash), volatile working memory (RAM), peripherals and I/O. Within the broader taxonomy, the S12XS sits under 16-bit MCU -> automotive MCU -> HCS12X family -> embedded controller. Its XGATE co-processor offloads interrupt-driven I/O servicing from the main S12X CPU, allowing the CPU to focus on application logic while the co-processor handles high-speed peripheral data movement - a defining feature of the S12X family versus the older HCS12. Key features include 64 KB of Flash with security, 4 KB of RAM, a 40 MHz S12X core producing 25 MHz effective instruction throughput, an Enhanced Capture Timer (ECT), an 8/10-bit Analog-to-Digital Converter (ADC), an 8-channel PWM, MSCAN (CAN 2.0A/B) for vehicle networking, SCI and SPI serial interfaces, and a periodic interrupt timer. The 'V' temperature grade marks -40C to +105C operation for under-hood automotive environments, and the 'A' suffix denotes the 80-LQFP package. The S12X architecture pairs a 16-bit CISC CPU with a programmable 16-bit co-processor that executes a RISC-like instruction set optimized for moving data between peripherals and memory. This dual-engine design enables deterministic real-time response in CAN-heavy body control applications where traditional polling loops would starve the application layer. Typical applications include automotive body control modules, HVAC door modules, instrument clusters, lighting controllers, and LIN/CAN gateway nodes. The combination of 64 KB Flash, CAN interface, PWM channels, and AEC-Q100 qualification also suits industrial motor control and battery management peripherals. When designing with this device, allocate sufficient Flash for both application code and a robust bootloader with rollback. The single 1.8 V supply simplifies power-tree design, but be aware that I/O is 5 V-tolerant only on designated pins and external CAN transceivers are still required for bus isolation. This page synthesizes distributor stock, package markings, and AEC-Q100 qualification status for the S9S12XS64J1VAAR alongside pin-compatible S12XS family alternatives, providing information not bundled in the standalone reference manual.

USD $5,05 Em estoque

S9S12ZVL16F0VLC

S9S12ZVL16F0VLC - 16KB Flash S12Z MagniV 32MHz MCU, 32-LQFP | NXP

The NXP Semiconductors S9S12ZVL16F0VLC is a MagniV 16-bit microcontroller built on the S12Z core, integrating 16KB of Flash, a 12V-to-5V voltage regulator, and a LIN physical-layer transceiver in a single 32-pin LQFP (7x7) package. It runs at 25MHz core frequency (32MHz bus) and is AEC-Q100 automotive qualified for -40C to +105C operation. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, memory (Flash/RAM), peripherals, and increasingly mixed-signal analog interfaces. The S12 MagniV family is NXP's mixed-signal MCU platform that consolidates a sophisticated S12Z CPU with high-voltage analog blocks (LDO, LIN PHY) to reduce external BOM in space-constrained automotive nodes. Within the broader hierarchy, the S12ZVL sits at: S12ZVL family -> S12 MagniV mixed-signal MCU -> 16-bit automotive MCU -> microcontroller (IC) -> semiconductor. Key features include 16KB (16K x 8) on-chip Flash, 1KB RAM, the integrated Vreg for direct 12V battery supply, a LIN 2.x transceiver, an MSCAN (CAN 2.0) controller, and a 10-channel 10-bit ADC. The S12Z core implements an enhanced CISC instruction set with BCD and fuzzy logic support, plus hardware stack pointer and index register improvements versus older HC12 cores. Architecturally, the die combines a 5V-tolerant digital section with the high-voltage analog front end (12V LIN/regulator), allowing direct connection to the automotive 12V bus without external protection. The 32-LQFP-7x7 footprint and the integrated LIN/CAN analog make it specifically suited for cost-sensitive body-electronics nodes such as door modules, seat controllers, and HVAC flaps. Typical applications include LIN slave nodes for window lifters, seat-position actuators, mirror adjusters, interior lighting, HVAC damper control, and body controllers that bridge sensor inputs to a CAN/LIN backbone. The integrated 12V regulator eliminates the need for an external pre-regulator on the PCB. When designing with this part, ensure the LIN bus is properly terminated with the recommended pull-up and that the high-voltage analog section is bypassed with the capacitors called out in the NXP reference manual. Firmware must initialize the integrated VREG and the LIN PHY mode before enabling bus activity. This page synthesizes distributor pricing, AEC-Q100 qualification status, and drop-in same-family alternatives that are not consolidated in the manufacturer datasheet, providing an independent engineering summary useful for BOM management.

USD $3,15 Em estoque

SAA7111AHZ/V4

SAA7111AHZ/V4 - Enhanced Video Input Processor LQFP-64 | NXP

The NXP Semiconductors SAA7111AHZ/V4 is a pure 3.3 V CMOS Enhanced Video Input Processor (EVIP) that integrates an analog front-end with a digital video decoder in a single 64-pin LQFP (10x10 mm, 1.4 mm profile) surface-mount package. It accepts CVBS or S-Video (Y/C) analog inputs from TV tuners, cameras, and VCRs, and decodes PAL, SECAM, and NTSC color formats into CCIR-601 compatible digital component values for downstream MPEG, JPEG, or graphics ASICs. An Enhanced Video Input Processor (EVIP) is a mixed-signal front-end IC that combines a multi-channel analog video preamplifier, anti-alias filtering, an ADC, and a digital chroma/luma processor. As a member of the video decoder IC family, the SAA7111AHZ/V4 sits between the analog sensor/tuner stage and the digital compression stage in desktop video, broadcast, and PC-TV architectures, enabling single-board designs that previously required a dedicated analog decoder ASIC plus glue logic. Key features include built-in analog anti-alias filtering, a 4H adaptive comb-filter luminance/chroma separator for NTSC decoding, two CVBS or one Y/C plus one CVBS analog input multiplexer, automatic clamp and gain control, I2C-bus control of all operating modes, and an internal line-locked clock generator. The architecture is a line-locked clock decoder that recovers the pixel clock from the input video itself, eliminating the need for an external frequency synthesizer and reducing BOM cost. Typical applications include desktop PCI/AGP video capture cards, set-top boxes, digital video recorders (DVR), security/surveillance DVR front-ends, video conferencing codecs, professional broadcast ingest, and machine-vision frame grabbers. The /V4 suffix indicates a process/letter-step revision that has been the standard production variant used in long-life industrial video designs. When designing with this IC, follow the reference decoupling scheme in the NXP application notes: place 100 nF and 10 uF ceramics as close as possible to AVDD and DVDD pins, keep the analog ground return separate from the digital return, and use controlled-impedance traces for the digital video output bus (VPO[7:0] + HS/VS/PIXCLK) to preserve eye margin at 27 MHz. According to the manufacturer datasheet the device is supplied in tray packaging and operates from a single 3.3 V supply, drawing approximately 70 mA in active decode. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, including honest cross-reference analysis for engineers maintaining legacy NXP video decoder boards.

USD $5,20 Em estoque

SAB-C167CS-L40M

SAB-C167CS-L40M - 40MHz 16-bit C167CS MCU ROM-less | Infineon

The Infineon SAB-C167CS-L40M is a 16-bit CMOS single-chip microcontroller from the C166 family, operating at up to 40 MHz and delivering up to 20 MIPS of CPU throughput, packaged in a 144-pin MQFP (P-MQFP-144-8). It integrates 11 Kbytes of SRAM, 111 digital I/O lines, a CAN module, PWM timers, and 16-bit/捕获/比较 units, and is offered as a ROM-less variant for applications requiring external program memory. The part operates across a 4.5 V to 5.5 V supply range at commercial temperature grades and was published by Infineon Technologies AG in the 2005-02 datasheet edition. A 16-bit single-chip microcontroller (MCU) is an integrated processor core, memory, and peripheral set on a single die, executing instructions from on-chip or external program memory and serving as the central controller for embedded systems. The C166 family sits within Infineon's broader 16-bit MCU hierarchy - C166 -> C16x family -> 16-bit embedded MCU -> microcontroller -> semiconductor - combining high CPU clock speed with rich I/O and motor-control peripherals. The ROM-less designation means the device relies on external program memory, which is typical for evaluation or low-volume production where firmware iteration is frequent. Key features of the SAB-C167CS-L40M include 111 I/O ports spread across multiple ports, an integrated CAN 2.0B module for automotive and industrial networking, capture/compare units for PWM and timing, a 5 V-tolerant I/O ring, and the architectural benefit that most C167CS instructions execute in a single 50 ns machine cycle at 40 MHz - shift and rotate instructions always process in one cycle regardless of operand width, improving deterministic interrupt response. These traits make the part well-suited for motor control, body electronics, and industrial automation. Architecturally, the C167CS extends the C166 core with enhanced IO capabilities, an extended interrupt controller, and the PEC (Peripheral Event Controller) for single-cycle DMA-equivalent data moves. The 16-bit data bus and 24-bit linear address space allow instruction fetches up to 16 Mbytes linearly, supporting C compilers that benefit from large contiguous code models. Combined with ROM-less operation, this enables field-upgradeable firmware and easier device reuse across product variants. Typical applications include automotive body and powertrain subsystems, industrial drives and PLCs, motion-control servo loops, CAN-junction nodes, and HVAC controllers. Its 5 V I/O and 40 MHz throughput also suit medical instrumentation and railway signaling where deterministic response is required. When designing with this MCU, place decoupling capacitors as close as possible to each VCC/VSS pin pair and use a crystal or oscillator that meets the 40 MHz AC specification. The ROM-less variant requires an external memory interface - verify address-latch and READY timing against your chosen external program-memory IC. Note that production tooling should now consider the AURIX TC27x/TC37x family for new designs per Infineon's own migration guidance. This page synthesizes distributor pricing, drop-in C167CS same-package alternatives, and practical design notes not found in the manufacturer datasheet alone.

USD $21,90 Em estoque

SABC505CA-4EM

SABC505CA-4EM - 8-Bit CMOS MCU, C505 Family | Infineon

The Infineon SABC505CA-4EM (also written SAB-C505CA-4EM) is an 8-bit CMOS microcontroller from the C505 family, originally derived from the Siemens SAB-C505 architecture. It is supplied in an MQFP-44-2 package (44-pin Metric Quad Flat Pack) and is offered as an OTP (One-Time Programmable) device, integrating an 8051-compatible core with on-chip peripherals targeted at embedded control. An 8-bit MCU (microcontroller unit) is a self-contained processor core plus RAM, ROM/Flash/OTP, and peripherals on a single silicon die. It belongs to the hierarchy: 8-bit microcontroller -> microcontroller -> embedded processor -> integrated circuit -> semiconductor. The C505 family is widely used in industrial automation, automotive body and chassis ECUs, and consumer appliances where deterministic real-time behaviour, low power, and a compact code footprint are required. Key features include an industry-standard 8051 instruction set for binary compatibility with existing code bases, OTP program memory for low-cost volume production, on-chip oscillator, multiple timers/counters, a programmable serial interface (UART), and parallel I/O. The C505CA variant adds an integrated CAN (Controller Area Network) controller, which is the principal reason this part was selected in automotive and industrial networking designs. CMOS process technology keeps quiescent current low, allowing battery-friendly operation. From an architectural standpoint, the SABC505CA-4EM uses the classic 8051 dual-pointer scheme, an 8-bit ALU with extended addressing, and a 16-bit program counter. Internal registers, stack, and interrupt structure remain identical to the original MCS-51, easing migration from Intel 8051 / Siemens / Infineon legacy designs. The OTP cell array is programmed once at production time using standard 8051 programmers, which makes the device attractive for high-volume, low-unit-cost applications. Typical applications include automotive body controllers, CAN node endpoints, HVAC blower controls, instrument clusters, simple industrial sensor interfaces, and white-goods motor control. The combination of 8051 code reuse and on-chip CAN reduces BOM cost versus discrete CAN transceivers plus an external protocol controller. When designing with this part, ensure the OTP programming socket, security bit, and lock bits are configured before code commit; the OTP cannot be erased. Verify VCC decoupling and reset supervisor behaviour to match 8051 timing expectations (especially the minimum reset pulse width). The part is now mature/EOL - design new platforms around flash-based successors such as the XC800 or TLE984x families.

USD $7,15 Em estoque

SAC7111J1VAG50

SAC7111J1VAG50 - 32-bit ARM7 MCU, 512KB Flash, 50MHz, Automotive

The NXP SAC7111J1VAG50 is a 32-bit ARM7TDMI microcontroller with 512KB on-chip Flash, 50MHz maximum CPU clock, and an extended temperature range of -40C to +105C, housed in a 144-pin LQFP package. Designed as a member of NXP's pin-compatible MAC7111 family, the part targets embedded automotive body and chassis applications requiring deterministic real-time response and on-chip peripherals for CAN, LIN, SPI, SCI and analog acquisition. An ARM7-based microcontroller is a RISC processor core (Reduced Instruction Set Computer) that pairs a 32-bit data path with a 16-bit Thumb instruction set to balance code density and execution throughput. Within a vehicle electrical/electronic (E/E) architecture, such an MCU belongs to the broader system hierarchy: microcontroller -> embedded processor -> automotive ECU -> vehicle network. The MAC7111 family specifically targets the body and chassis domain where multiple in-vehicle sub-systems (lighting, door modules, instrument clusters) must be networked over CAN or LIN bus segments. Key features of the SAC7111J1VAG50 include 512KB embedded Flash (in-application programmable via a background debug mode or factory programming), 32KB SRAM for stack and data buffers, an enhanced CAN 2.0B controller, two SCI (UART) channels, one SPI peripheral, an 8-channel 10-bit ADC for analog signal acquisition, and a periodic interrupt timer for RTOS tick generation. The 144-pin LQFP footprint exposes all peripheral pins to the outside world for maximum design flexibility in body controller and gateway modules. Architecturally the device integrates a 32-bit ARM7TDMI core with a 32-bit AHB system bus and a peripheral bridge to legacy 16-bit IP blocks, achieving deterministic interrupt latency below 100ns - critical for CAN frame timing and PWM-driven motor control loops. The 50MHz CPU clock combined with Thumb-mode execution delivers approximately 45 MIPS of integer throughput, sufficient for real-time body-controller firmware without external memory. Typical applications include automotive body control modules (BCM), instrument clusters, climate and HVAC controllers, door-zone ECUs, central gateway nodes bridging CAN/LIN buses, and dashboard lighting controllers. The -40C to +105C automotive temperature grade also makes the part suitable for under-hood ancillaries located in mild thermal zones such as wiper modules and seat controllers. When designing with this MCU, plan the PCB land pattern for a 144-pin LQFP at 0.5mm pitch and reserve a 4-layer stackup with a dedicated ground plane beneath the part to suppress EMI from the 50MHz core. Consider a 3.3V-only LDO such as a TLE4271 or equivalent automotive-grade regulator with load-dump protection on VBAT; the SAC7111J1VAG50 itself has no internal 5V tolerance on most I/O. This page synthesizes distributor pricing, drop-in LQFP-144 alternatives from the MAC7111 family, automotive temperature-grade compliance data and PCB-level layout notes that are not consolidated on the manufacturer short-form datasheet.

USD $11,60 Em estoque

SAF-C505CA-4EMCA

SAF-C505CA-4EMCA - 8-Bit 8051 MCU, 32KB OTP, 20MHz | Infineon

The Infineon SAF-C505CA-4EMCA is an 8-bit single-chip microcontroller based on the 8051 CISC architecture, delivering 20 MHz CPU performance with 32 KB of on-chip OTP program memory and 1.25 KB of SRAM in a 44-pin MQFP (PG-MQFP-44-2) package. It is part of the Infineon C500 family and is targeted at automotive body electronics and industrial control applications requiring deterministic 8051 instruction set compatibility. An 8-bit microcontroller (often abbreviated MCU) is a single-chip computer that integrates a CPU, program memory, data memory, and peripherals on one silicon die. The 8051 family, originally introduced by Intel in 1980 and now maintained by multiple vendors, remains one of the most widely deployed embedded instruction set architectures; derivatives like the C505CA extend the original 8051 with on-chip peripherals while preserving binary compatibility with the standard MCS-51 instruction set. Key features of the SAF-C505CA-4EMCA include a 32 KB OTP program memory (one-time programmable), 1.25 KB on-chip SRAM, a 20 MHz maximum CPU clock, and a 5 V single supply operation. The device integrates standard 8051 peripherals including timers/counters, a programmable serial interface (UART), and bidirectional I/O ports, plus the enhanced Timer 2 with compare/capture/reload functionality described in the manufacturer datasheet. The MQFP-44 package provides 34 programmable I/O lines for typical embedded interface requirements. The C505CA silicon combines the legacy 8051 core with Infineon-specific peripheral enhancements, allowing existing 8051 firmware to be re-used while adding modern motor-control and PWM-oriented peripherals. The OTP program memory supports field programming for low-volume automotive and industrial production runs. Typical applications include automotive body controllers (window lift, central locking, lighting management), industrial sensor interfaces, low-end motor drives, and white goods control boards. The wide automotive operating range and 8051 software compatibility make the SAF-C505CA-4EMCA especially useful in designs that must extend the lifecycle of legacy 8051 platforms. When designing with this part, note that the OTP memory is not re-programmable in-circuit; a separate SAF-C505CA-4EMCA with masked ROM is required for high-volume production runs above the OTP economic threshold. Always validate the pin assignments against the manufacturer datasheet before laying out the PCB footprint, because several MQFP-44 variants exist in the C500 family. This page synthesizes distributor pricing, drop-in pin-compatible alternatives, and practical design notes that are not consolidated in the manufacturer datasheet alone.

USD $7,05 Em estoque

SAF-XC866-4FRI

SAF-XC866-4FRI - 8-Bit 86MHz XC800 MCU, 16KB Flash | Infineon

The Infineon SAF-XC866-4FRI is an 8-bit single-chip microcontroller belonging to the XC800 family, delivering up to 86 MHz CPU clock from a 3 V core supply in a PG-TSSOP-38 package. The device integrates 16 KB of embedded Flash program memory alongside 768 B of RAM and is designed for cost-sensitive industrial and automotive body applications where deterministic 8051-compatible core execution is required. An 8-bit microcontroller (MCU) is a programmable integrated circuit that combines a CPU, memory, and I/O peripherals on a single die. The XC800 family extends the classic 8051 instruction set architecture with Infineon's peripheral set and on-chip voltage regulation, enabling single-supply operation from a 3.3 V rail. Within the broader semiconductor taxonomy, the SAF-XC866-4FRI sits as: MCU -> microcontroller -> 8-bit microcontroller -> embedded processor -> semiconductor IC. Key features include a 16 KB Flash program store with in-system programming support, 768 B of RAM for data and stack operations, integrated ADC for mixed-signal sensing, and a 3 V internal voltage regulator that simplifies board-level power design. The PG-TSSOP-38 footprint measures 9.7 mm x 6.4 mm with 0.5 mm pitch and supports industrial-grade operating temperature. The architecture pairs an 8051-compatible core with the XC800 peripheral set, including a multi-channel 10-bit ADC, capture/compare units (CCU6) for motor control PWM, and on-chip CAN/UART/SPI interfaces depending on the exact derivative. The 86 MHz internal clock is generated by an on-chip PLL from an external crystal or resonator, eliminating the need for an external clock driver. Typical applications include BLDC and stepper motor control for small appliances, automotive body electronics such as window lift and seat control modules, HVAC fan controllers, sensor signal conditioning nodes, and industrial sensor interfaces where deterministic real-time response is required. When designing with the SAF-XC866-4FRI, ensure the external crystal or resonator matches the PLL configuration in the Infineon XC866 user manual. Decouple VDD and VDDP pins with 100 nF + 10 uF ceramic capacitors placed within 5 mm of the supply pins to suppress switching transients from the internal regulator. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not found in the standalone Infineon datasheet PDF, helping engineers evaluate sourcing risk and footprint compatibility.

USD $3,42 Em estoque

SAF-XC886CM-8FFI

SAF-XC886CM-8FFI - 8-Bit MCU, 32KB Flash, CAN/LIN, PG-TQFP-48 | Infineon

The Infineon SAF-XC886CM-8FFI is an 8-bit single-chip microcontroller from the XC88x family, integrating both a CAN 2.0B active controller and LIN support on-chip for advanced automotive/body networking. The device is delivered in a 48-pin PG-TQFP package with 32 KB of on-chip Flash program memory and 1.75 KB of RAM, and operates from a 3 V to 5.5 V supply across -40 °C to +85 °C industrial/automotive grade. What is an 8-bit MCU? An 8-bit microcontroller is a self-contained computing element that integrates an 8-bit CPU core, program memory (Flash or ROM), data memory (RAM), and a range of peripherals (timers, ADC, communication controllers, GPIO) onto a single silicon die. Within the microcontroller hierarchy, the XC886 sits under the broader category of CAN-enabled automotive MCUs, itself a subcategory of industrial microcontrollers and ultimately a member of the embedded processing / semiconductor family. This integration makes 8-bit MCUs cost-effective for body electronics, sensor nodes, and simple actuator control where a 32-bit MCU is not warranted. Key features of the SAF-XC886CM-8FFI include a 48 MHz maximum CPU clock, a 13-channel GPIO peripheral set, an integrated CAN 2.0B active controller with hardware masking/filtering/buffering of frames to offload the CPU, and LIN master/slave support allowing the chip to act as a single-chip network node without an external transceiver controller. An on-chip MultiCAN-like structure and the standard XC800 peripheral set (capture/compare units, ADC, watchdog) round out the device. Architecturally, the part is based on the industry-proven XC800 8051-compatible core, augmented with Infineon's peripheral enhancements including the CAN node, an enhanced interrupt controller, and on-chip oscillator with PLL. The 119-page datasheet document V0.1, 2006-02 is referenced as the canonical source for the family. The XC886/888CLM family supports both 5 V and 3.3 V operation; this specific variant (CM-8FFI) is the 5 V AC grade; a sister variant SAF-XC886CM-8FFI 3V3 AC targets 3.3 V systems. Typical applications include automotive body control modules, dashboard instrument clusters, HVAC control, smart sensor/ECUs with CAN or LIN connectivity, industrial CANopen nodes, building automation gateways, and appliance control boards that require fieldbus networking. Design consideration: at 48 MHz and 5 V supply the device draws tens of mA active; ensure the PCB supply trace and decoupling network handle the worst-case in-rush, and that the CAN transceiver output is correctly terminated per ISO 11898. Many engineers also place an external 8 MHz or 10 MHz crystal since the internal oscillator has limited temperature stability for CAN timing. This page synthesizes distributor pricing for the 3V3 AC and 5V AC variants, drop-in sister-family alternatives sharing the PG-TQFP-48 footprint, and practical design notes not found in the bare datasheet.

USD $3,58 Em estoque

SAF-XC886CM-8FFI5VAC

SAF-XC886CM-8FFI5VAC - 8-bit MCU, 32KB Flash, CAN/LIN | Infineon

The Infineon SAF-XC886CM-8FFI5VAC is an 8-bit single-chip microcontroller from the XC88x family, offering 32KB of Flash memory and 1.75KB of RAM in a 48-pin TQFP package. It integrates a CAN 2.0B-active controller and LIN support on-chip, delivering advanced networking capabilities for cost-sensitive automotive body and powertrain applications. The device operates from a 5V supply (4.5V to 5.5V range) at industrial temperature grade (-40C to +125C) and runs at up to 24 MHz core clock. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash/ROM), working memory (RAM), and a rich set of peripherals (timers, ADC, communication interfaces) into one package. Within the broader semiconductor taxonomy, an 8-bit MCU belongs to the embedded microcontroller family, itself a sub-category of microprocessors. The XC88x series targets cost-optimized networked nodes in vehicles where CAN/LIN connectivity replaces point-to-point wiring. Key features of the SAF-XC886CM-8FFI5VAC include on-chip CAN 2.0B-active and LIN slave/master interfaces, an 8-channel 10-bit ADC with successive-approximation conversion, capture/compare unit (CCU6) for motor-control PWM generation, and a multi-purpose timer (T12/T13). The XC88x core uses the XC800 instruction set with a two-stage pipeline, providing predictable interrupt latency suitable for real-time control loops. On-chip oscillator support and a PLL reduce external BOM, while a window watchdog and brown-out detector improve functional safety. Typical applications include automotive body control modules, HVAC flap and blower actuators, lighting controllers (interior/exterior LED drivers with LIN command interface), instrument cluster sub-modules, and small sensor/ECU nodes in CAN/LIN vehicle networks. The integrated CAN transceiver-less controller is paired with an external CAN PHY such as Infineon's TLE6250G. The device is also suitable for industrial CANopen nodes and LIN sub-bus slaves where deterministic 8-bit performance is acceptable. A key design consideration when using this part is the 5V supply requirement; designers should provide adequate decoupling (100 nF + 10 uF) near VDD pins and route the analog AVCC separately. For noise-critical ADC conversions, average multiple samples and synchronize conversions with PWM to reduce switching-noise aliasing. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found on a single manufacturer page, giving engineers a one-stop reference for selecting, sourcing, and qualifying the SAF-XC886CM-8FFI5VAC.

USD $4,10 Em estoque

SAF-XE167F-96F66L

SAF-XE167F-96F66L - 16-Bit 66MHz 768KB Flash MCU | Infineon

The Infineon SAF-XE167F-96F66L is a 16-bit single-chip real-time signal controller from the XE166 classic series (alpha line) that runs at 66 MHz, integrates 768 KB of embedded Flash program memory, and is housed in a 144-pin PG-LQFP-144 (LQFP with exposed pad) package. It combines a C166SV2 CISC/DSP/RISC core with a rich peripheral set for hard real-time industrial and automotive control. A 16-bit microcontroller is an integrated circuit that combines a CPU, program memory, data memory, and peripherals such as timers, serial interfaces, and analog-to-digital converters on a single die. Within the semiconductor taxonomy, the SAF-XE167F-96F66L sits at microcontroller unit (MCU) -> embedded controller -> 16-bit real-time signal controller -> C166/XE166 family, a lineage originally developed by Infineon (and its predecessor Siemens/Cypress heritage) for motor control, power conversion, and automotive body electronics. Key features include a 66 MHz maximum CPU clock, 768 KB on-chip Flash, a 3.3 V core supply with 5 V tolerant I/O, a 144-pin LQFP exposed-pad package for improved thermal performance, and the C166SV2 instruction set with DSP extensions (MAC unit) that accelerates control-loop math. The XE166 family also provides a flexible peripheral event controller, multi-channel PWM, and multiple CAN nodes for distributed control architectures. The exposed-pad LQFP-144 package (PG-LQFP-144) lowers thermal resistance compared with standard LQFP, which matters when the device drives gate-driver and communication peripherals continuously at 66 MHz. The 768 KB Flash allows single-chip implementation of complex field-oriented-control and protocol stacks without external memory, reducing BOM cost and board area. Typical applications include industrial motor drives and servo controllers, automotive body and powertrain control modules, solar and power-conversion inverters, and industrial automation I/O modules. The combination of 66 MHz compute, DSP MAC, and CAN connectivity fits distributed real-time nodes that must close control loops in microseconds. When designing with this device, verify the core and I/O supply sequencing and decouple each supply pin with a low-ESR ceramic capacitor placed close to the package. The exposed pad must be soldered to a grounded thermal land with adequate via stitching to carry heat away from the die. This page synthesizes distributor availability, drop-in alternative analysis, and practical design notes that go beyond the manufacturer datasheet, giving engineers a single reference for sourcing and layout decisions.

Cotação Em estoque

SAF1761BE/V1

SAF1761BE/V1 - Hi-Speed USB 2.0 OTG Controller | NXP | 128-LQFP

The NXP SAF1761BE/V1 is a Hi-Speed Universal Serial Bus (USB) host controller with on-the-go (OTG) support, packaged in a 128-pin LQFP (14x20 mm). It integrates a Hi-Speed USB 2.0 controller with a generic processor interface, designed for embedded applications requiring USB host, device, or OTG functionality. A USB controller IC is an interface device that bridges a host processor to the Universal Serial Bus physical layer, handling protocol framing, transaction translation, and electrical signaling. The SAF1761BE/V1 belongs to the USB 2.0 controller family (hypernyms: USB 2.0 controller -> USB interface IC -> peripheral controller -> interface IC -> integrated circuit), enabling embedded microprocessors without native USB hardware to add one or more Hi-Speed USB ports. It operates as a Line/Bus Controller using PCI/CMOS technology and supports three supply rails (1.8V, 3.3V, and 5V) for core logic, I/O, and USB transceiver functions. Key features include USB 2.0 Hi-Speed compliance (480 Mbps), On-The-Go (OTG) supplement support, a flexible parallel/generic processor interface for connection to virtually any 8/16-bit microcontroller or CPU, integrated PHY, and industrial temperature range (-40C to +85C). The 128-LQFP package supports both production and prototyping designs, while the PCI/CMOS process delivers low power consumption relative to USB controller solutions from this generation. Architecturally, the SAF1761BE/V1 combines a USB 2.0 transceiver, serial interface engine (SIE), protocol handler, and a generic bus interface in a single die. This integration eliminates external PHY or transceiver components, reducing BOM and PCB area. The OTG controller allows the device to act as either host or peripheral, supporting dual-role operation useful in tablets, portable instrumentation, and industrial handhelds. Typical applications include embedded USB host ports, industrial data loggers, USB OTG docking stations, portable medical devices, and automotive infotainment peripherals. Designers choose this part when they need a proven USB 2.0 Hi-Speed interface for embedded systems that lack native USB capability. When designing with this device, allocate adequate PCB area for the 128-LQFP footprint and ensure clean 3.3V and 5V rails with sufficient decoupling. The parallel host interface pins must be routed to the host CPU data/address bus following standard bus-length and impedance guidelines. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

USD $9,50 Em estoque

SAFXE167F96F66LAC

SAFXE167F96F66LAC - 16-Bit XE166 MCU, 768KB Flash, 66MHz | Infineon

The Infineon SAFXE167F96F66LAC is a 16-bit single-chip real-time signal controller from the XE166 family (Compact Line), delivering 66 MHz CPU clock speed, 768 KB on-chip Flash, and 80 KB SRAM in a 144-pin LQFP-EP (20x20 mm) package with green plastic, lead-free terminations. The device is built around the C166SV2 core, integrates DSP/RISC style MAC instructions for deterministic signal processing, and provides 28 I/O ports with multiple serial interfaces including CAN, USART, SSC and I2C. A microcontroller (MCU) is an integrated circuit that combines a CPU, memory (Flash/RAM), peripherals, and I/O on a single die to execute embedded control firmware. The XE166 family targets real-time industrial applications — motor control, power conversion, automotive body and chassis, and industrial automation. The 'Compact Line' subset of XE166 balances deterministic interrupt latency with peripherals aimed at field-oriented control (FOC) for motors. Key features include 768 KB Flash for application code plus parameters, 80 KB SRAM for data and stack, a 66 MHz C166SV2 core delivering up to 66 MIPS with single-cycle MAC, an integrated A/D converter system with up to 16 channels, and on-chip oscillator/PLL supporting 3.0 V to 5.5 V single-supply operation. The part is qualified to industrial temperature range (-40 °C to +125 °C) and offers robust EMC for harsh environments. Architecturally, the SAFXE167F96F66LAC implements a five-stage pipeline with hardware multiply-accumulate (MAC) units optimized for high-rate signal processing loops such as Park/Clarke transforms used in motor FOC. The peripheral co-processor (PCP) offloads DMA-style data movement from the core, while the peripheral control processor manages CAN/USART transactions without CPU intervention. The 1 MByte linear address space is mapped across the Flash and SRAM with wait-state configuration on the Flash interface for deterministic instruction fetch at full clock rate. Typical applications include industrial motor drives (PMSM, BLDC, induction), servo controllers, renewable-energy inverters (solar, wind), automotive body and chassis ECUs, and industrial sensor/IoT edge nodes. The deterministic C166SV2 core is frequently paired with Infineon’s TLE9180 gate driver and Eice-ICE debugger for field-oriented motor control. When designing, ensure the 5 V rail is decoupled locally with 100 nF plus 4.7 µF ceramic and follow Infineon’s PCB layout for the LQFP-EP exposed pad — the EP must be soldered to a 1 sq-inch ground plane for thermal relief at full peripheral load. Confirm Flash endurance (typ. 100 k cycles per sector) in your firmware update strategy. This page synthesizes distributor pricing, drop-in pin-compatible alternatives, and practical design notes not found in the manufacturer datasheet — a faster engineering reference than re-reading the 122-page XE167 user manual.

USD $21,10 Em estoque

SAK-C167CR-LM

SAK-C167CR-LM - 16-Bit C166 Microcontroller 25MHz ROM-less | Infineon

The Infineon SAK-C167CR-LM is a 16-bit single-chip CMOS microcontroller from the C166 family, delivered in a 144-pin PQFP (metric, Metric Plastic Quad Flat Pack - LM suffix) package and qualified for the -40 °C to +125 °C industrial operating range. The part is ROM-less (the 'K' in SAK denotes no on-chip program memory) and provides 16.5 MIPS peak instruction throughput, an integrated MAC unit for DSP-style arithmetic, a 16-channel A/D converter, two CAN 2.0B nodes, and up to 111 general-purpose I/O lines. The C167CR derivative adds capture/compare unit 6 (CAPCOM6) for advanced PWM generation and an on-chip PLL generating 25 MHz CPU clock from an external crystal or oscillator source. A microcontroller (MCU) is a single integrated circuit that combines a CPU core, volatile and non-volatile memory, and programmable peripherals on a single die. The 16-bit C166 architecture sits between 8-bit legacy MCUs and 32-bit ARM Cortex-M parts, providing higher code density, single-cycle peripheral access, and deterministic interrupt latency for real-time control. Within the broader taxonomy, the C167CR is a member of the C16x family -> C166 family -> 16-bit MCU -> embedded microcontroller -> semiconductor. ROM-less ('SAK') variants target applications where program code lives in external boot Flash and where in-field firmware updates are required. Key differentiating features of the SAK-C167CR-LM include up to 16.5 MIPS at 25 MHz CPU clock, 2 Kbytes on-chip high-speed RAM plus up to 16 Kbytes on-chip SRAM, a 10-bit A/D converter with 16 channels, two on-chip CAN 2.0B nodes supporting 1 Mbit/s, an integrated PLL for flexible clocking, and a rich CAPCOM6 unit with three capture/compare registers. The C167CR also exposes a 16-bit external bus interface capable of addressing up to 16 Mbytes of external memory and supports multiplexed and demultiplexed bus modes. Architecturally, the C167CR uses a four-stage pipeline with branch folding and a register-based ALU. Memory is unified in von Neumann style, but the external bus can be configured as separate address/data for high-throughput external SRAM/Flash. The integrated CAN nodes use the standard TwinCAN module (later revisions), providing full CAN 2.0B compliance and 32 message objects each. Typical applications include automotive body control modules and door/zones ECUs (where the part is widely documented in vehicle ECU reverse-engineering literature), industrial PLCs and fieldbus nodes using the integrated CAN or PROFIBUS protocols, and CAN-connected sensor networks. ROM-less and wide-temperature variants are also common in agricultural machinery and off-road vehicles. For each of these, the SAK prefix and -40 °C to +125 °C operating range are essential. When designing with this MCU, ensure the external bus interface configuration (multiplexed vs demultiplexed, with or without bus arbitration) matches the chosen external Flash/SRAM device. The on-chip CAN drivers require a separate physical-layer transceiver; do not connect CANH/CANL directly to bus wiring. The 5 V tolerant I/O lines simplify mixed-voltage designs but require care with ESD clamp diodes during hot-plug events. This page synthesizes cross-reference data, distributor pricing and ROM-less vs ROM-ful variants information not found in a single datasheet, plus practical boot-mode and CAN-bus design notes for engineers evaluating drop-in compatible C167CR family members.

USD $18,65 Em estoque

Subcategorias

Produtos (32725)