Microcontroladores

Produtos (20.000+)

MK64FN1M0VLL12 - K64 120MHz Cortex-M4F MCU 1MB Flash | NXP
MK64FN1M0VLL12

MK64FN1M0VLL12 - K64 120MHz Cortex-M4F MCU 1MB Flash | NXP

The NXP MK64FN1M0VLL12 is a Kinetis K64 sub-family microcontroller built on the ARM Cortex-M4F core running at up to 120 MHz with 1 MB of embedded Flash and 256 KB of SRAM, housed in a 100-pin LQFP (14x14 mm) package. It integrates a full-speed USB 2.0 On-The-Go controller, a 10/100 Mbps Ethernet MAC with MII/RMII, hardware encryption (AES, DES, SHA, RSA), and a rich analog/digital peripheral set including 16-bit SAR ADC, 12-bit DAC, comparators, FlexIO, and multiple timers. What is a Kinetis K-series microcontroller? The Kinetis K-series is NXP's portfolio of pin-, peripheral- and software-compatible ARM Cortex-M4F microcontrollers designed for low-power, mixed-signal embedded applications. The K64 sub-family specifically targets cost-effective connected nodes that require USB, Ethernet, and hardware-accelerated cryptography, placing it in the broader hierarchy: microcontroller (MCU) -> 32-bit MCU -> ARM Cortex-M MCU -> connected MCU -> industrial/IoT edge device. Key features include up to 120 MHz CPU with single-precision FPU and DSP instructions, 1 MB Flash with 256 KB SRAM, 4 KB FlexCache (in FlexMemory parts only - this part uses Non-Flex FTFE flash), full-speed USB OTG with on-chip FS PHY, 10/100 Ethernet MAC, multiple low-power modes (Run, Wait, Stop, VLPR, VLPS, LLS, VLLSx) with down to sub-uA RTC retention, and an operating voltage range of 1.71 V to 3.6 V supporting 1.8 V, 2.5 V, and 3.3 V rails. The K64 architecture pairs a Cortex-M4F core with a crossbar switch, a 4-channel DMA controller, and an efficient bit-band alias region. The hardware cryptography acceleration (AES-128, AES-256, DES, 3DES, SHA-1, SHA-256, RSA, and a true random number generator) makes it well suited to TLS/SSL offload in IoT edge nodes where software cryptography would starve the Cortex-M4F. Typical applications include industrial IoT gateways with Ethernet and USB, secure connected sensors, low-power motor control nodes, building automation controllers, and Ethernet-attached metering/lighting nodes. The integrated Ethernet MAC and USB OTG remove the need for an external PHY companion, reducing BOM cost and PCB area. When designing with the MK64FN1M0VLL12, provide a decoupling network of 100 nF X7R capacitors on each VDD pin and a bulk 4.7 uF on the main 3.3 V rail; place the 32.768 kHz crystal load capacitors as close to the XTAL32 pins as possible to avoid jitter on the PLL-derived system clock. Note that this part uses Non-Flex (FTFE) memory with 4 KB sectors programmed in 8-byte phrases - if your toolchain assumes 2 KB sector / 4-byte longword FlexMemory (FTFL) programming, reprogram the flash driver accordingly. This page synthesizes distributor pricing, drop-in alternatives, and practical K64 design notes not found in the manufacturer datasheet.

Cotação Contato
MK64FN1M0VLQ12 - 120MHz Cortex-M4F MCU 1MB Flash LQFP-144 | NXP
MK64FN1M0VLQ12

MK64FN1M0VLQ12 - 120MHz Cortex-M4F MCU 1MB Flash LQFP-144 | NXP

The NXP MK64FN1M0VLQ12 is a 32-bit ARM Cortex-M4 microcontroller with FPU from the Kinetis K64 sub-family, featuring 120 MHz CPU speed, 1 MB Flash and 256 KB SRAM in a 144-pin LQFP (20x20 mm) package. It integrates Full-Speed USB 2.0 with on-chip transceiver, 10/100 Mbps Ethernet MAC with IEEE 1588 precision time protocol, and a wide set of analog and digital peripherals for connected industrial designs. A Kinetis K64 sub-family MCU is a Cortex-M4 based microcontroller optimized for low-power, USB/Ethernet-connected applications that require large on-chip memory. The K64 sub-family sits within the broader Kinetis K series, which provides pin-, peripheral-, and software-compatible Cortex-M4 devices from 50 MHz to 180 MHz. As such, the MK64FN1M0VLQ12 acts as a system-on-chip solution for gateways, smart sensors, and human-machine interface (HMI) controllers where Ethernet and USB connectivity, deterministic real-time behaviour, and low active current are simultaneously required. Key features include 1 MB of program Flash, 256 KB of SRAM, four 16-bit ADCs (up to 818 ksps in 12-bit mode), two 12-bit DACs, multiple timer/PWM modules (FlexTimer, PDB, PIT), three SPI, four I2C, six UART, CAN, and I2S/SAI audio interfaces. An integrated 1.2 V core regulator with on-chip LDO and low-power run/wait/very-low-power-stop modes enable battery-friendly operation down to single-digit mA active current. The 144-LQFP (LQ) package exposes the full peripheral set including the EMAC/MII, USB OTG, and external memory bus (FlexBus). Architecturally, the device pairs an Arm Cortex-M4F core (single-precision FPU, DSP extensions, MPU) with a multi-layer AIPS-Lite bus matrix, dedicated DMA (eDMA) channels, and a flexible clock distribution tree driven by FLL/PLL blocks from an internal 50 MHz reference. Security and reliability features include a hardware CRC module, watchdog, external watchdog monitor, and JTAG/SWD debug. The K64 sub-family is supported by NXP Kinetis SDK 2.x, MCUXpresso IDE, and the FreeRTOS/Amazon FreeRTOS ecosystem, ensuring long-term software compatibility across pin-compatible K-series variants. Typical applications include industrial Ethernet IO modules, building automation controllers, smart energy gateways, USB-to-Ethernet bridges, HMI panels, and low-power connected sensor nodes. The combination of Ethernet MAC and USB OTG makes it a strong choice for protocol converters and IoT edge devices that must serve both fieldbus and host connectivity from a single MCU. When designing with the MK64FN1M0VLQ12, ensure the LQFP-144 PCB layout dedicates separate ground returns for the analog and digital domains and that the 1.2 V core supply decoupling is sized per the reference manual; otherwise noise coupling into the ADCs will degrade SNR. For lower-cost variants, the K22F and K24F sub-families offer pin compatibility at smaller flash densities. This page synthesizes distributor pricing, pin-compatible LQFP-144 alternatives from the same Kinetis family, and practical design notes that complement the manufacturer reference manual (K64P144M120SF5RM).

Cotação Contato
MK64FX512VMD12 - 120MHz ARM Cortex-M4 MCU 512KB Flash | NXP
MK64FX512VMD12

MK64FX512VMD12 - 120MHz ARM Cortex-M4 MCU 512KB Flash | NXP

The NXP Semiconductors MK64FX512VMD12 is a 120 MHz ARM Cortex-M4 microcontroller with FPU and DSP instructions, integrating 512 KB of program flash and 256 KB of SRAM, packaged in a 144-pin MAP-BGA (13x13 mm). It is part of the Kinetis K64 sub-family and operates from 1.71 V to 3.6 V, making it suitable for both 2.5 V and 3.3 V system rails. An ARM Cortex-M4 MCU is a 32-bit RISC processor core with a hardware single-precision floating-point unit and DSP extensions (MAC, SIMD), optimized for deterministic real-time control. Within the NXP portfolio, Kinetis MCUs belong to the broader K6x/K6x sub-family hierarchy: Cortex-M4 core -> Kinetis MCU family -> 32-bit microcontroller -> embedded processor -> semiconductor. The K64 sub-family specifically targets industrial connectivity and low-power IoT gateway applications. Key features include a 16-bit ADC with up to 24 channels, a 12-bit DAC, two 12-bit ADCs and 12-bit DAC, four 32-bit timers, two CAN 2.0B controllers, USB 2.0 full-speed with on-chip transceiver, 10/100 Ethernet MAC, and a low-power segment LCD controller (in some K64 variants). The integrated FPU accelerates single-precision math, and DSP instructions enable efficient sensor-fusion and motor-control algorithms at the boundary between MCU and DSP performance. Typical applications include industrial control PLCs and HMI panels, secure connected IoT gateways with Ethernet/USB, factory automation sensor nodes, low-power handheld measurement instruments, and H-bridge / 3-phase motor control (FOC, sinusoidal commutation) where the FPU + DSP combination removes the need for a separate DSP chip. When designing with this device, ensure the BGA land pattern follows the JEDEC MS-034 ball-pad geometry for 144-MAPBGA, and pay attention to the four corner balls for thermal pad and decoupling placement. The internal 1.2 V core regulator requires at least 4.7 uF of low-ESR ceramic capacitance on the VCAP pin to maintain regulation under dynamic load. This page synthesizes distributor pricing across DigiKey/Mouser/LCSC, alternative cross-reference findings, and practical design notes not found on any single distributor page.

Cotação Contato
MK65FX1M0VMI18 - Kinetis K65 180MHz Cortex-M4 MCU 1MB Flash | NXP
MK65FX1M0VMI18

MK65FX1M0VMI18 - Kinetis K65 180MHz Cortex-M4 MCU 1MB Flash | NXP

The NXP MK65FX1M0VMI18 is a Kinetis K65 32-bit ARM Cortex-M4 microcontroller with hardware encryption and tamper detection, 180 MHz core clock, 1 MB Flash, and integrated 10/100 Ethernet MAC, housed in a 169-pin MAPBGA (9x9 mm) package optimized for industrial, medical, and security-sensitive applications. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, peripherals, and I/O onto one silicon die. The Cortex-M4 is an ARM processor core specifically engineered for deterministic, real-time embedded control with DSP and single-precision FPU extensions. Microcontrollers in the Kinetis family target general-purpose and connectivity-rich embedded designs where on-chip Ethernet, USB, CAN, and security accelerators reduce system BOM and PCB complexity. Within the broader taxonomy, this part sits in the application-specific MCU sub-category, one tier above commodity Cortex-M0 devices and one tier below the Cortex-M7 high-performance line used in graphical HMI. Key features include 1 MB of embedded Flash and 256 KB of SRAM, two USB controllers (one with on-chip HS PHY), an integrated 10/100 Ethernet MAC with 1588 hardware timestamping, hardware AES and DES cryptographic accelerators, a true random number generator, and a passive tamper-detection grid. The ARM Cortex-M4 core with FPU delivers 180 MHz throughput and 1.25 DMIPS/MHz, while the integrated interrupt controller supports deterministic low-latency response required for industrial protocols. The K65 silicon integrates 12-bit ADCs, multiple DAC channels, FlexTimers, an SDHC interface, and a wide operating voltage range from 1.71 V to 3.6 V. The MAPBGA-169 (VMI) package exposes a 16-bit external bus for SDRAM expansion and supports a wide industrial temperature grade. Compared to lower-tier Kinetis K10/K20 devices, the K65 doubles Flash/RAM and adds Ethernet plus a second USB port. Typical applications include industrial Ethernet-based PLCs and IO-Link masters, secure point-of-sale terminals with hardware AES, medical patient monitors requiring tampered-event logging, and building automation gateways. The combination of hardware encryption, IEEE 1588 timestamping, and deterministic Cortex-M4 control loops makes it well suited to Industry 4.0 protocols such as PROFINET, EtherCAT, and EtherNet/IP. When designing with this device, plan a 4-layer PCB with continuous ground and stitched power planes to keep the MAPBGA-169 BGA return paths short, and place a 0.1 µF decoupling capacitor within 2 mm of every VDD pin. Ensure that the tamper grid is properly isolated from noise sources if it is routed across the PCB, and verify that the SDHC bus trace length matches the 50 Ω impedance requirement when using high-speed SD cards. This page synthesizes distributor pricing, drop-in alternatives from the same NXP family, and practical design notes not found in the manufacturer's datasheet.

Cotação Contato
MK66FN2M0VLQ18 - 180MHz Cortex-M4F 2MB MCU | NXP
MK66FN2M0VLQ18

MK66FN2M0VLQ18 - 180MHz Cortex-M4F 2MB MCU | NXP

The NXP Semiconductors MK66FN2M0VLQ18 is a 180 MHz ARM Cortex-M4F microcontroller with 2 MB flash memory, 256 KB SRAM, and a 144-LQFP 20 x 20 mm package. It combines advanced mixed-signal control connectivity and dual USB support for demanding embedded systems. According to the NXP product information and distributor records, this device is suited to complex control systems that require substantial local memory and extensive peripheral integration. A microcontroller is a programmable embedded controller that integrates a processor core, nonvolatile program memory, data memory, and peripherals such as communications ports, timers, analog converters, and digital I/O on one chip. The ARM Cortex-M4F core includes single-precision floating-point instructions for efficient control calculations, while large on-chip memories reduce external bus traffic and system complexity. This places the device in the 32-bit MCU, embedded processor, and industrial control hierarchy. The principal features include a 180 MHz maximum core frequency, 2 MB flash organized as 2M x 8, 256 KB SRAM, and both full-speed and high-speed USB support identified by the verified Kinetis K66 data. The integrated connectivity also includes Ethernet support. These interfaces enable a single controller to manage communications, real-time control loops, data acquisition, and user-facing functions without requiring several discrete interface devices. The Kinetis K66 architecture targets applications requiring large memory densities and low-power processing. Its Cortex-M4F core can accelerate digital filtering, motor-control mathematics, and general numeric workloads, while on-chip SRAM provides working memory for networking stacks and buffering. Exact cache, floating-point pipeline, power-state, and peripheral timing details should be confirmed in the NXP manufacturer datasheet before final qualification. Typical uses include industrial Ethernet controllers, USB-connected data acquisition, building and automation controllers, motor-control systems, and complex human-machine-interface equipment. The two USB controllers can support different device roles or peripheral functions, while Ethernet is useful for connected control platforms. These applications benefit from local program storage, fast deterministic execution, and a broad set of integrated interfaces. Design planning should include package-specific PCB layout, correct decoupling, clock configuration, boot-strapping, and firmware support for the selected USB mode. High-speed USB may require additional PLL and signal-integrity implementation, as noted in NXP community guidance. Engineers should also verify the complete pin mapping and peripheral instance availability against the manufacturer documentation before schematic capture. This page combines verified manufacturer and distributor facts with application guidance, selection trade-offs, and engineering-focused comparisons. It identifies the K66’s memory, core-frequency, USB, Ethernet, and package advantages without implying that differently packaged or architecturally incompatible devices are drop-in replacements.

Cotação Contato
MK66FN2M0VMD18 - 180MHz Cortex-M4F MCU, 2MB Flash, 144-MAPBGA
MK66FN2M0VMD18

MK66FN2M0VMD18 - 180MHz Cortex-M4F MCU, 2MB Flash, 144-MAPBGA

The NXP MK66FN2M0VMD18 is a high-performance 32-bit ARM Cortex-M4F microcontroller from the Kinetis K66 sub-family, delivering up to 180 MHz core frequency with a single-precision floating-point unit. It integrates 2 MB of flash memory and 256 KB of SRAM in a 144-pin MAPBGA (13x13 mm) package, designed for industrial and embedded applications requiring large memory density, dual USB (FS + HS) connectivity, and 10/100 Mbit/s Ethernet MAC with IEEE 1588 precision time protocol support. An MCU (microcontroller unit) is a single-chip computer that integrates a CPU core, memory, and programmable peripherals. Within the system hierarchy, MK66FN2M0VMD18 sits at: microcontroller -> embedded processor -> semiconductor. The Cortex-M4F core enables DSP instructions and FPU-based floating-point math, while the rich peripheral set (USB, Ethernet, CAN, SDHC, multiple timers, ADCs) supports complex industrial protocols without external coprocessors. The K66 maintains hardware/software compatibility with the broader Kinetis family, simplifying migration between K60, K64, and K66 sub-families. Key features include 2 MB program flash, 256 KB SRAM, dual USB 2.0 controllers (one full-speed, one high-speed ULPI-capable), IEEE 1588 Ethernet MAC, hardware cryptography (AES, DES, SHA), 16-bit ADC, 12-bit DAC, FlexTimers, low-power modes with RTC wake-up, and an operating voltage range of 1.71 V to 3.6 V. The device supports -40C to +105C extended industrial temperature grades. Architecturally, the MK66FN2M0VMD18 uses NXP's low-leakage process technology with an integrated voltage regulator and multiple low-power modes (VLPR, VLLS, STOP). The 144-MAPBGA package provides a compact 13x13 mm footprint suitable for space-constrained designs while maintaining robust thermal performance and full GPIO access. Typical applications include industrial Ethernet nodes (PROFINET, EtherNet/IP gateways), building automation controllers, point-of-sale terminals, industrial HMI panels, USB/Ethernet bridges, and IoT edge gateways. The dual-USB and Ethernet MAC make it ideal for connected industrial devices that require both wired networking and USB device/host functionality. When designing with this part, ensure the 144-MAPBGA PCB footprint has proper microvia/stacked-via escape routing. Use the NXP MCUXpresso IDE or Kinetis SDK for firmware development. Power decoupling requires bulk + bypass capacitors adjacent to each VDD pin group. This page synthesizes distributor pricing, cross-reference data, and practical engineering notes for the MK66FN2M0VMD18 not found in the manufacturer datasheet alone, providing engineers with a consolidated decision-making resource.

Cotação Contato
MK66FX1M0VLQ18 - Kinetis K66 180MHz Cortex-M4F MCU, 1MB Flash | NXP
MK66FX1M0VLQ18

MK66FX1M0VLQ18 - Kinetis K66 180MHz Cortex-M4F MCU, 1MB Flash | NXP

The NXP Semiconductors MK66FX1M0VLQ18 is a high-performance 32-bit ARM Cortex-M4F microcontroller from the Kinetis K66 sub-family, running at up to 180 MHz with an integrated single-precision FPU and DSP instructions. It integrates 1 MB of program flash and 256 KB of SRAM on-chip, and is delivered in a 144-pin LQFP (20x20 mm) package optimized for industrial Ethernet and USB-OTG designs. A microcontroller (MCU) is a single-chip computer that combines a CPU core, volatile and non-volatile memory, peripherals, and I/O. The Cortex-M4F is ARM's embedded core with hardware floating-point, deterministic interrupts, and DSP extensions tailored for real-time signal processing. The Kinetis K66 sub-family sits in NXP's mid-to-high tier of Kinetis MCUs, balancing large memory density with low-power modes for energy-constrained connected products. Key features of the MK66FX1M0VLQ18 include IEEE 1588 hardware Ethernet, dual USB-OTG controllers with on-chip HS PHY, a 16-bit ADC with DMA, multiple UART/SPI/I2C modules, an SDHC interface, a hardware encryption module (CAU), and FlexTimer/PWM blocks. The 144-LQFP footprint exposes up to 100 GPIO, with 5V-tolerant I/O for mixed-voltage designs and a 1.71-3.6V operating supply range. The K66 architecture uses a 90nm low-power process, multi-layer AHB bus matrix, and low-leakage SRAM retention that yields run-mode current under 1 mA/MHz and deep-sleep currents below 5 uA. The device includes an MMCAU accelerator for AES, DES, and SHA hash offload, freeing CPU cycles for protocol stacks. Typical applications include industrial IoT gateways with EtherCAT or PROFINET bridging, USB instrumentation, point-of-sale terminals, smart metering, motor-control reference designs, and audio processing nodes. The large flash supports full TCP/IP stacks plus application firmware without external memory. When designing, ensure proper decoupling (100 nF + 4.7 uF per VDD/VSS pair) and route the differential USB and Ethernet impedance-controlled traces per NXP application note AN4830. Verify JTAG/SWD pull-ups for in-circuit debug sessions. This page consolidates distributor stock, drop-in K6x alternatives, and practical layout notes that complement - not duplicate - the NXP K66 datasheet.

Cotação Contato
MK70FN1M0VMJ15 - 150MHz Cortex-M4 MCU, 1MB Flash | NXP
MK70FN1M0VMJ15

MK70FN1M0VMJ15 - 150MHz Cortex-M4 MCU, 1MB Flash | NXP

The NXP Semiconductors MK70FN1M0VMJ15 is a 32-bit ARM Cortex-M4 Kinetis K70 microcontroller running at up to 150 MHz, integrating 1 MB of program flash and 128 KB of SRAM in a 256-ball MAP-BGA (17x17) package. The K70 sub-family combines a Cortex-M4 core with single-precision FPU, a graphic LCD controller, two USB controllers (FS and HS), an Ethernet MAC, and a rich analog/mixed-signal peripheral set for human-machine interface and connected embedded designs. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), working memory (SRAM), and configurable peripherals on one silicon die. Within the broader semiconductor taxonomy, microcontrollers sit under microprocessors and embedded processors, and within the Kinetis family they are categorized as Cortex-M4 based mixed-signal MCUs optimized for low-power and graphics-rich HMI applications. The K70 targets single-chip QVGA color displays and can be paired with external memory to drive up to SVGA panels. Key features include 1 MB Flash, 128 KB SRAM, IEEE 1588 hardware timestamps, a 16-bit SAR ADC with up to 4 channels, two 12-bit DACs, a low-power timer, real-time clock, carrier modulator transmitter, and USB 2.0 full-/high-speed OTG with on-chip HS PHY. The device operates from 1.71 V to 3.6 V, supports multiple low-power modes (Wait, Very-Low-Power Wait, Stop, VLLS), and the 256 MAP-BGA package provides the I/O density needed for display, Ethernet, and USB interfaces running concurrently. Architecturally, the K70 uses an ARM Cortex-M4 core with DSP extensions and a single-precision floating-point unit, enabling deterministic interrupt response and efficient signal-processing workloads. The integrated graphic LCD controller, TFT and segment LCD support, and anti-aliasing hardware accelerate rich UI rendering without burdening the CPU. The 150 MHz core mark, paired with tightly-coupled peripherals, places the MK70FN1M0VMJ15 squarely in the high-performance, mixed-signal HMI MCU tier of the Kinetis portfolio. Typical applications include industrial control panels with color TFT displays, point-of-sale terminals and kiosks, navigational displays, medical patient-monitoring equipment with graphical UIs, and connected building/HVAC controllers with Ethernet connectivity. The integrated Ethernet MAC and dual USB OTG allow the MK70FN1M0VMJ15 to serve as a bridge MCU between local touch/display interfaces and networked back-ends. When designing with the MK70FN1M0VMJ15, ensure the 256-ball BGA layout uses microvia-compatible PCB stack-up, route HS USB differential pairs with 90 ohm differential impedance, and provide adequate decoupling for the multiple supply rails. Plan boot configuration straps (BOOTCFG0/1) for in-system Flash programming and consider the device's industrial temperature range when validating in HMI enclosures.

Cotação Contato
MK70FX512VMJ12 - 120MHz Cortex-M4 MCU, 512KB Flash | NXP
MK70FX512VMJ12

MK70FX512VMJ12 - 120MHz Cortex-M4 MCU, 512KB Flash | NXP

The NXP MK70FX512VMJ12 is a Kinetis K70 32-bit ARM Cortex-M4 microcontroller with FPU operating at up to 120 MHz, integrating 512 KB of program flash and 512 KB of FlexMemory on-chip, plus 128 KB SRAM, two USB controllers (one with on-chip HS/LS PHY), an Ethernet MAC, hardware encryption, and an integrated TFT/LCD controller, packaged in a 256-ball MAP-BGA (17 x 17 mm, tray). A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, peripherals, and I/O. Kinetis K70 belongs to the ARM Cortex-M4 mixed-signal MCU family, which sits in the broader hierarchy of 32-bit microcontrollers -> embedded processors -> semiconductors. Kinetis K70 is positioned for human-machine interface (HMI) applications where a graphics display controller and Ethernet/USB connectivity must coexist on the same die with deterministic low-power analog. Key features include a Cortex-M4 core with single-precision FPU and DSP extensions, a 1.71 V to 3.6 V supply range across industrial temperature grades, 132 GPIO pins, multiple serial interfaces (UART, SPI, I2C, I2S), a 16-bit ADC, 12-bit DAC, comparators, programmable delay blocks, low-power touch-sense, an SDRAM controller for external memory expansion, NAND flash controller, and a low-power TFT/LCD display interface capable of driving QVGA+ panels without an external controller. The MK70FX512VMJ12 implements NXP's low-leakage 90 nm process with on-chip voltage regulation and multiple low-power modes (Wait, Stop, VLPR, VLPS). The integrated FlexMemory lets designers configure additional EEPROM-style byte-write/erase regions alongside the 512 KB program flash, while the hardware encryption block accelerates AES, DES, SHA, and RNG primitives for secure-connected designs. Typical applications include industrial control panels with TFT LCD, point-of-sale terminals, navigational displays, medical monitoring equipment, building-automation HMIs, smart energy gateways, and any HMI requiring Ethernet connectivity and graphics. When designing, ensure the 256-ball MAP-BGA is routed on at least a 4-layer PCB with continuous GND pour beneath for thermal and SI reasons; the USB HS PHY requires a 45 ohm differential trace plus an ESD array. Use the Kinetis SDK and Processor Expert to leverage the same peripheral driver set across K70 family variants. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes that are not collated in the manufacturer datasheet alone.

Cotação Contato
MK70FX512VMJ15 - 150MHz Kinetis K70 Cortex-M4 MCU | NXP
MK70FX512VMJ15

MK70FX512VMJ15 - 150MHz Kinetis K70 Cortex-M4 MCU | NXP

The NXP MK70FX512VMJ15 is a 32-bit ARM Cortex-M4 microcontroller from the Kinetis K70 sub-family, operating at up to 150 MHz with FPU and DSP instructions, and integrating 512 KB of program flash plus 512 KB of FlexMemory and 128 KB of SRAM in a 256-pin MAPBGA (17x17 mm) package. A Kinetis K-series microcontroller is a low-power mixed-signal MCU that combines a Cortex-M4 core, on-chip analog peripherals, hardware crypto, and connectivity such as Ethernet, USB, and an LCD segment/dot-matrix driver, intended for applications that need a single chip to drive a color QVGA display while running communication stacks. Within the NXP taxonomy it sits in the hierarchy: Kinetis K70 -> K-series -> Kinetis -> 32-bit MCU -> microcontroller -> semiconductor, and is the K70 sub-family member optimized for color QVGA TFT panels and segment LCDs. Key features of the MK70FX512VMJ15 include an integrated TSI touch-sensing interface, hardware encryption (AES, DES, SHA), a 16-bit ADC with up to 64 channels, a 12-bit DAC, multiple timer/PWM blocks, two USB controllers (one with HS ULPI PHY), and an Ethernet MAC with IEEE 1588 support, all powered from a 1.71-3.6 V supply. The 256-pin MAPBGA exposes 8-bit and 16-bit SDRAM/DDR memory interfaces, ideal for buffered LCD panels. Architecturally the part uses a Cortex-M4 core with single-precision FPU and DSP extensions, JTAG/SWD debug, and a Cortex-M4 trace macrocell. The on-chip regulator supports low-power Run, Wait, Stop, and VLPR/VLPS modes, and the FlexMemory lets engineers configure EEPROM-like regions for data logging. Mixed-signal integration is a hallmark: dual 16-bit ADCs, 12-bit DAC, comparators with 6-bit DAC, and a 1.2 V internal voltage reference. Typical applications include industrial control panels with TFT/LCD HMI, navigational displays, point-of-sale terminals, medical patient-monitoring equipment, and graphical data-acquisition panels where Ethernet or USB OTG connectivity is required. The integrated SDRAM/DDR controller also suits portable medical instruments and barcode-scanner HMI. A key design consideration when using the MK70FX512VMJ15 is the 256-pin MAPBGA layout, which requires microvia and HDI PCB technology for escape routing; engineers should plan for at least four layers and follow NXP's K70 hardware design notes for SDRAM signal integrity and decoupling. This page synthesizes distributor pricing, drop-in same-family alternatives from the K70 sub-family, and practical design notes not found in the manufacturer datasheet, so engineers can shorten the BOM-validation cycle for this part.

Cotação Contato
MKE02Z16VLC2 - 20MHz Cortex-M0+ 16KB Flash MCU | NXP
MKE02Z16VLC2

MKE02Z16VLC2 - 20MHz Cortex-M0+ 16KB Flash MCU | NXP

The NXP MKE02Z16VLC2 is an entry-level ARM Cortex-M0+ microcontroller from the Kinetis KE02 sub-family, delivering up to 20 MHz core performance with 16 KB of on-chip Flash and 2 KB of SRAM in a 32-pin LQFP package. It operates from 2.7 V to 5.5 V single-supply rails and supports ambient temperatures from -40 °C to +105 °C for industrial-grade deployments. The KE02 sub-family is the entry point to the broader Kinetis E series and is pin-compatible with other Kinetis E devices and the legacy 8-bit S08P family. An MCU (microcontroller) is a single-chip computer that integrates a CPU core, memory, and programmable peripherals. The Cortex-M0+ architecture is the smallest and most energy-efficient ARM core designed for embedded applications, offering a 32-bit instruction set in a footprint competitive with 8-bit devices. The KE02 sits within NXP's Kinetis E series of low-power, high-robustness MCUs targeting cost-sensitive industrial and consumer segments. Key features include a 20 MHz Cortex-M0+ core with a single-cycle 32-bit x 32-bit hardware multiplier, 16 KB Flash with 2.7-5.5 V write voltage range, 2 KB SRAM, and a power management controller (PMC) with three modes: Run, Wait, and Stop. The integrated analog includes ADCs and comparators; communication peripherals cover UART, SPI, and I2C, while timers support PWM and capture/compare functions. The 32-LQFP package provides flexible I/O for cost-sensitive designs. The KE02 architecture leverages the Cortex-M0+ core's two-stage pipeline and reduced instruction set for predictable interrupt latency and deterministic execution, critical in motor and lighting control loops. The wide 5 V supply tolerance eliminates the need for level shifters in 3.3 V mixed-signal environments and improves transient immunity in industrial settings. Hardware ECC and watchdog support provide functional safety for white-goods and small-motor applications. Typical applications include household appliances, BLDC and small DC motor control, lighting ballasts, HVAC fan control, industrial sensors, and low-cost consumer electronics. The pin-compatibility with the wider Kinetis E family allows seamless migration to higher-memory or feature-rich variants without PCB rework, protecting firmware and layout investment during product evolution. When designing with this MCU, allocate pin functions early because the 32-pin LQFP limits available I/O. Decouple VDD with a 100 nF ceramic close to the pin, and ensure the reset pin has a proper pull-up to guarantee clean startup across the full -40 °C to +105 °C operating range. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design considerations compiled from the NXP datasheet and authorized distributor listings - information not consolidated on any single source page.

Cotação Contato
MKE02Z16VLC2R - 20MHz 16KB Flash ARM Cortex-M0+ MCU | NXP
MKE02Z16VLC2R

MKE02Z16VLC2R - 20MHz 16KB Flash ARM Cortex-M0+ MCU | NXP

The NXP MKE02Z16VLC2R is a 20 MHz 32-bit ARM Cortex-M0+ microcontroller with 16 KB of Flash memory, 2 KB of SRAM, and 28 GPIO in a 32-LQFP package. It belongs to the Kinetis KE02 family, combining a compact general-purpose MCU with communication, timing, control, analog, and power-management peripherals for cost-sensitive embedded designs. A microcontroller is a programmable system-on-chip that integrates a processor core, memory, and peripherals into one device. The ARM Cortex-M0+ core uses a 32-bit architecture and executes compact embedded firmware, while the KE02 family emphasizes low cost, low power, and high robustness. The MKE02Z16VLC2R is positioned as an entry point into NXP's Kinetis E-series portfolio and is identified as pin-compatible with Kinetis E-series devices and the S08P family. Verified features include a 20 MHz operating frequency, 16 KB programmable Flash, 2 KB SRAM, 28 I/O, and connectivity through I2C, SPI, and UART/USART. Listed peripherals include low-voltage detection, pulse-width modulation, and a watchdog timer. Its power-management module supports Run, Wait, and Stop modes, helping conserve energy when the application does not require continuous processing. The KE02 architecture combines a compact Cortex-M0+ core with integrated communication and control resources, reducing external component requirements in compact control boards. Flash supports in-system programming, while SRAM provides working memory for firmware execution. The available I2C, SPI, and serial interfaces allow the MCU to connect sensors, memory, converters, actuators, and human-interface devices without requiring several dedicated interface controllers. Typical uses include industrial control modules, small sensor nodes, building and appliance controllers, compact power converters, communication equipment, and low-cost embedded products. The 32-LQFP package exposes 28 I/O and is suitable for conventional PCB assembly, prototype boards, and automated production lines that require a leaded surface-mount package. Designers should select the MCU according to firmware size, SRAM demand, peripheral requirements, low-power behavior, and operating-temperature limits. If design rules specify automotive qualification or extended environmental ratings, those requirements must be checked separately because the provided data does not establish AEC-Q100 qualification. Validate all pin multiplexing, clock, and peripheral settings against the current manufacturer documentation before release. This product page combines verified manufacturer and distributor information, practical selection guidance, application context, and honest handling of missing technical data. It is intended to help engineers identify whether the MKE02Z16VLC2R fits a new embedded design or an existing 32-LQFP controller platform.

Cotação Contato
MKE02Z32VLD2 - 20MHz Cortex-M0+ MCU 32KB Flash | NXP
MKE02Z32VLD2

MKE02Z32VLD2 - 20MHz Cortex-M0+ MCU 32KB Flash | NXP

The NXP Semiconductors MKE02Z32VLD2 is a Kinetis KE02 sub-family 32-bit microcontroller built on the Arm Cortex-M0+ core running at up to 20 MHz, with 32 KB flash memory, 4 KB SRAM, and a wide 2.7 V to 5.5 V operating voltage range, housed in a 44-pin LQFP (10 x 10 mm) surface-mount package. A microcontroller (MCU) is a single integrated circuit that combines a processor core, memory, and peripheral functions such as timers, communication interfaces, and analog converters. Within the power-management hierarchy of embedded systems, the Kinetis E series positions the KE02 as the entry point to NXP's 5 V-tolerant, high-robustness MCU portfolio, pin compatible with the wider Kinetis E series and with NXP's legacy 8-bit S08P family, easing migration from 8-bit designs. Key features include the 20 MHz Cortex-M0+ core with a single-cycle 32-bit x 32-bit multiplier, 32 KB of self-programmable flash with a 2.7 V to 5.5 V flash write voltage range, and an ambient temperature range of -40 C to +105 C for demanding industrial environments. Integrated analog and robust 5 V operation eliminate the need for an external level-shifting supply rail, reducing bill-of-materials cost. The KE02 architecture emphasizes robustness: wide-voltage single-supply operation, ESD-hardened I/O structures, and peripheral sets targeted at motor control, power conversion, and human-machine interfaces. The Cortex-M0+ core delivers low power consumption and code density compatible with the existing Arm toolchain ecosystem, including MCUXpresso IDE and Keil MDK. Typical applications include home appliances, industrial motor control, power supplies and battery chargers, and automotive body modules where 5 V robustness and wide temperature range are required. When designing with this device, budget flash and SRAM carefully: 4 KB of SRAM is ample for bare-metal control loops but constrains RTOS or protocol-stack-heavy designs; consider the pin-compatible 64 KB MKE02Z64VLD2 variant for growth headroom. This page synthesizes distributor pricing, same-footprint drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

Cotação Contato
MKE02Z32VQH4 - 40MHz Cortex-M0+ 32KB MCU | NXP
MKE02Z32VQH4

MKE02Z32VQH4 - 40MHz Cortex-M0+ 32KB MCU | NXP

The NXP Semiconductors MKE02Z32VQH4 is a 32-bit ARM Cortex-M0+ Kinetis KE02 microcontroller operating up to 40 MHz, with 32 KB of Flash memory and 4 KB of SRAM, housed in a 64-QFP 14 mm x 14 mm package. It is designed for cost-sensitive, high-reliability applications in electrically noisy automotive and industrial environments. A microcontroller is a programmable system-on-chip that integrates a processor core, memory, and peripherals such as timers, serial interfaces, analog blocks, and interrupt-control resources. The Kinetis KE02 family belongs to the broader 32-bit microcontroller hierarchy and combines deterministic control with flexible embedded software. The MKE02Z32VQH4 targets motor-control, general embedded, and industrial applications that require a compact 64-pin solution. The verified product information identifies a 32-bit Cortex-M0+ core, 40 MHz maximum operating frequency, 32 KB Flash, 4 KB SRAM, and a 5 V robust MCU architecture. Its enhanced ESD/EMC performance is intended for high-electrical-noise equipment. The package provides 64 gull-wing terminals, while the QFP form factor supports conventional surface-mount assembly and easier inspection than very fine-pitch packages. NXP describes the KE02 family as a cost-sensitive MCU solution with FlexTimer modules and low-power operating modes. These features support periodic control, motor-control signal generation, communications, and energy-conscious embedded operation. Firmware developers can use the Cortex-M0+ instruction set and integrated peripherals to reduce external component count and consolidate control functions on one device. Typical applications include small motor controllers, industrial sensor nodes, appliance control boards, automotive accessory modules, and low-cost embedded systems. The 40 MHz operating rate supports responsive control-loop execution, while 32 KB Flash provides room for application code and configuration data. The 4 KB SRAM is sufficient for moderate buffering and stack requirements when firmware is kept within verified memory limits. When designing a PCB, confirm every signal, supply, ground, and exposed-package connection against the NXP datasheet and reference manual before layout release. Decoupling, clock stability, motor-power isolation, analog grounding, and ESD protection remain design-specific requirements rather than inferred guarantees. Validate production firmware and electrical performance under the actual noise, temperature, and load conditions. This product record combines verified manufacturer and distributor information, commercial availability data, package characteristics, and design guidance. It is intended to help engineers source the exact MPN and assess it against same-family variants without presenting unverified substitutions as drop-in replacements.

Cotação Contato
MKE02Z64VLC2 - 20MHz Cortex-M0+ 64KB Flash MCU | NXP Kinetis
MKE02Z64VLC2

MKE02Z64VLC2 - 20MHz Cortex-M0+ 64KB Flash MCU | NXP Kinetis

The NXP MKE02Z64VLC2 is a Kinetis KE02 sub-family 32-bit Arm Cortex-M0+ microcontroller with 64 KB flash, 4 KB SRAM, and a 20 MHz CPU core, housed in a 32-pin LQFP (7x7 mm) package. It operates from a wide 2.7 V to 5.5 V supply and supports the same voltage range for flash write operations, making it tolerant of industrial 5 V rails and battery transients. An integrated single-cycle 32-bit x 32-bit multiplier and an ambient operating temperature of -40 C to +105 C position this part for robust embedded control. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, volatile and non-volatile memory, peripherals, and I/O. The Cortex-M0+ is the most energy-efficient Arm core for entry-level MCUs, while the Kinetis E series is NXP's 5 V-tolerant, EMC-robust MCU family for white goods, industrial sensors, and automotive body modules. The KE02 is the entry-point sub-family of the Kinetis E family and is pin-compatible with the broader E series and with NXP's legacy 8-bit S08P family, enabling easy migration from older designs. Key features include a 20 MHz Cortex-M0+ core with single-cycle 32-bit x 32-bit hardware multiplier, 64 KB program flash, 4 KB SRAM, an integrated 16-bit ADC, multiple serial communication interfaces (typically UART, SPI, I2C), timers, and a 5 V-tolerant I/O structure. The part supports low-power run, wait, and stop modes, and includes a low-voltage detect / brown-out reset block that holds the part in reset when VDD falls below safe thresholds. Hardware CRC, watchdog, and clock-loss detection improve functional safety at the system level. The KE02 architecture uses a fast Cortex-M0+ core coupled with a multi-layer AHB-Lite bus matrix, giving deterministic interrupt latency for real-time control loops. The flash memory controller and SRAM share a single 32-bit AHB-Lite port, while peripheral bridges expose timers, ADC, and communication modules at a separate bus speed. This split-bus design keeps ADC sampling and PWM switching predictable even when the CPU is servicing interrupts. Typical applications include white-goods motor control (washing machines, dishwashers, small appliances), industrial sensor conditioning, building automation nodes, low-end body-control automotive modules, and HVAC fan/pump control. The wide 5 V tolerance and -40 C to +105 C ambient rating also suit outdoor lighting and smart-meter peripherals. When designing with this part, ensure that the 5 V-tolerant I/O pins do not exceed VDDA + 0.3 V and that decoupling capacitors are placed within 5 mm of each supply pin. For high-noise industrial environments, place a ferrite bead on the analog supply and add an external watchdog supervisor if the application requires a SIL-class safety level. This page synthesizes XAIPART distributor pricing, drop-in Kinetis E alternatives, and practical design notes not collected in the manufacturer datasheet alone.

Cotação Contato
MKE02Z64VLC2557 - 32-bit ARM Cortex-M0+ 64KB Flash MCU | NXP
MKE02Z64VLC2557

MKE02Z64VLC2557 - 32-bit ARM Cortex-M0+ 64KB Flash MCU | NXP

The NXP MKE02Z64VLC2557 is a 32-bit ARM Cortex-M0+ microcontroller from the Kinetis KE02 sub-family, integrating 64 KB of Flash memory in a 32-pin LQFP (7x7 mm) package. It operates up to 20 MHz core frequency, includes up to 4 KB of SRAM, and is designed for cost-sensitive industrial and consumer embedded applications where deterministic Cortex-M0+ performance and small footprint matter. A microcontroller (MCU) is an integrated circuit that combines a CPU core, program memory (Flash), data memory (SRAM), and a rich set of peripherals (timers, ADCs, communication interfaces, GPIOs) on a single die. MCUs sit at the bottom of the embedded-computing hierarchy: MCU -> microcontroller -> embedded processor -> semiconductor IC. The Cortex-M0+ core is the smallest and most energy-efficient member of the ARM Cortex-M family, designed for deterministic interrupt response and ultra-low active/standby power - features that make it the de facto choice for battery-operated sensor nodes and small appliance controllers. Key features of the MKE02Z64VLC2557 include the ARM Cortex-M0+ core, 64 KB on-chip Flash, 4 KB SRAM, multiple low-power modes (Wait, Stop), and an internal clock source that allows operation without external crystals. The 32-pin LQFP (7x7) package gives designers 28 usable GPIO lines, ample for keypad scanning, LED drivers, and serial-bridge designs. The wide operating voltage range (typically 2.7 V to 5.5 V for the KE02 family) supports both 3.3 V and 5 V system rails, simplifying industrial designs. The Kinetis KE02 sub-family uses the Cortex-M0+ v0 architecture with a 2-stage pipeline, single-cycle 32x32 hardware multiply, and the standard ARM Cortex-M NVIC for interrupt handling. On-chip peripherals include multiple UART, SPI, and I2C modules, a 12-bit ADC, and FlexTimer/PWM modules suitable for motor control loops. The device's deterministic interrupt latency and atomic bit-banding make firmware development simpler compared to 8-bit legacy MCUs. Typical applications include home appliances (washing-machine user interfaces, induction-cooker control boards), small motor control (BLDC fans, low-power pumps), sensor interface modules, and industrial controllers that have historically used 8-bit MCUs. The KE02's 5 V tolerance on key pins also makes it a popular upgrade path for legacy 8051 designs. When designing with the MKE02Z64VLC2557, ensure the VDDA pin is decoupled with a 100 nF + 1 uF pair placed close to the package, and that the RESET pin has the proper 10 kohm pull-up. The internal clock source can remove the cost of an external crystal in cost-sensitive designs, but for timing-critical peripherals (UART, PWM) the external reference is recommended. This page synthesizes distributor pricing, lifecycle status, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

Cotação Contato
MKE02Z64VLD2 - 20MHz Cortex-M0+ MCU, 64KB Flash, 44-LQFP | NXP
MKE02Z64VLD2

MKE02Z64VLD2 - 20MHz Cortex-M0+ MCU, 64KB Flash, 44-LQFP | NXP

The NXP MKE02Z64VLD2 is an ARM Cortex-M0+ microcontroller from the Kinetis KE02 sub-family, delivering 20 MHz CPU performance with 64 KB of embedded flash and 4 KB of SRAM in a 44-pin LQFP (10x10 mm) package. As the entry-point to the Kinetis E series portfolio, it is pin-compatible with the rest of the Kinetis E series and with the legacy 8-bit S08P family, simplifying upgrades from existing designs. It operates across a 2.7 V to 5.5 V supply range, supporting both 3.3 V and 5 V rails typical in industrial and cost-sensitive automotive nodes. What is a Kinetis KE02 microcontroller? A Kinetis KE02 MCU is part of NXP's Kinetis E series of 32-bit ARM Cortex-M0+ microcontrollers designed for cost-sensitive, 5 V-tolerant, robust applications. In the taxonomy it falls under microcontroller -> 32-bit MCU -> ARM Cortex-M0+ MCU -> Kinetis E series -> KE02 sub-family. It is engineered for harsh electrical environments (high EMI, wide temperature range, brown-out immunity), making it a workhorse for appliance, industrial control, sensor interface, and automotive body-class applications. Key features include 64 KB on-chip flash, 4 KB SRAM, a 20 MHz Cortex-M0+ core, an internal clock with multiple power modes (Run, Wait, Stop), a 12-bit ADC, timers, PWM, and communication peripherals including UART, SPI, and I2C. The 5 V-tolerant I/O simplifies interfacing to legacy analog and power components without level shifters. Architecturally, the KE02 leverages an ARM Cortex-M0+ core with a Von-Neumann bus and a flash write voltage range of 2.7 V to 5.5 V. The Power Management Module (PMC) integrates three low-power modes to optimize energy efficiency in battery-powered or energy-starved nodes. Robust peripherals are tuned for industrial-grade EMC and ESD performance. Typical applications include industrial sensor hubs, automotive body and lighting controllers, white goods and major-appliance motor control (BLDC/PMSM), HVAC controllers, and low-cost IoT edge nodes. The wide-supply 5 V tolerance makes it well-suited for retrofit 5 V designs dominated by analog sensor front-ends. For designers, verify that your required peripheral set (ADC channels, timer/PWM count, communication port count) matches the LQFP-44 pinout before reuse; the KE02 sub-family offers variants with differing peripheral mixes in the same package. When migrating to a higher flash variant, the KE02Z64 footprint stays the same and the firmware platform remains binary-compatible.

Cotação Contato
MKE02Z64VQH2557 - 20MHz Cortex-M0+ 64KB MCU | NXP
MKE02Z64VQH2557

MKE02Z64VQH2557 - 20MHz Cortex-M0+ 64KB MCU | NXP

The NXP Semiconductors MKE02Z64VQH2557 is a 32-bit ARM Cortex-M0+ microcontroller from the Kinetis KE02 family, running at up to 20 MHz with 64 KB of flash program memory, 57 general-purpose I/O lines, and a 10-bit ADC, housed in a 64-pin LQFP (QFP, 14x14 mm, 0.8 mm pitch) surface-mount package. A microcontroller (MCU) is a single integrated circuit that combines a processor core, memory, and peripherals into one chip, forming the lowest tier of the embedded-processor hierarchy (MCU -> embedded processor -> microprocessor -> system-on-chip). The Kinetis KE02 sub-family is NXP's entry point into 32-bit embedded control, designed to replace 8-bit MCUs such as the HC08 and S08 families while pin-preserving migration paths exist within NXP's portfolio. Key features of the MKE02Z64VQH2557 include the ultra-low-power Cortex-M0+ core with its two-stage pipeline and high code density, 64 KB of on-chip flash memory, a wide 2.7V to 5.5V supply range with 3.3V nominal operation, multiple PWM channels for motor and power control, and an integrated 10-bit ADC. The 57 configurable I/O lines provide substantial connectivity for a 64-pin device. Technically, the KE02 family targets cost-sensitive, noisy electrical environments such as home appliances and industrial power conversion. NXP engineered the family with enhanced ESD and EMI robustness, and the wide voltage range allows direct operation from rectified mains-derived supplies or industrial rails without a dedicated regulator stage. The CMOS process keeps quiescent consumption low, and multiple low-power modes support battery-adjacent designs. Typical applications include small motor control (fans, pumps, BLDC drivers), AC-induction and universal-motor control in white goods, power supplies and battery chargers with PWM control loops, digital power conversion, and industrial sensing nodes that need an ADC plus robust I/O. For design-in, note that the 20 MHz core frequency bounds the arithmetic throughput, so timing-critical control loops should be validated at worst-case clock tolerance; the 10-bit ADC resolution is adequate for PWM-based power control but not precision instrumentation. This page synthesizes distributor pricing, drop-in same-family alternatives, and practical design notes not found in the manufacturer datasheet, with prices as of 2026-10-18.

Cotação Contato
MKE04Z64VLK4R - 48MHz Cortex-M0+ MCU 64KB Flash LQFP-80 | NXP
MKE04Z64VLK4R

MKE04Z64VLK4R - 48MHz Cortex-M0+ MCU 64KB Flash LQFP-80 | NXP

The NXP MKE04Z64VLK4R is a Kinetis KE04 family microcontroller built on the ARM Cortex-M0+ core running at 48 MHz, integrating 64 KB of flash program memory and 8 KB of SRAM in an 80-pin LQFP package. It is part of NXP's Kinetis E series designed for cost-sensitive, high-reliability applications in electrically noisy industrial and consumer environments, offering enhanced ESD/EMC robustness versus general-purpose Cortex-M0+ devices. What is a Cortex-M0+ microcontroller? The Cortex-M0+ is ARM's smallest and most energy-efficient 32-bit microcontroller core, designed for embedded systems that require deterministic real-time response, low power consumption, and a simple instruction set. An MCU (microcontroller) integrates a CPU core, program flash, SRAM, and peripherals (analog, timers, communication) into a single chip. The KE04 family sits at the low end of the Kinetis portfolio, optimized for 5 V-tolerant I/O and high-noise immunity rather than maximum performance - it competes in the same space as small PIC, AVR, and ST Cortex-M0 parts. Key features of the MKE04Z64VLK4R include 71 GPIO pins, an integrated 5 V regulator on the internal rail, multiple timers (FTM, LPTMR, PIT), up to two SPI, two I2C, and up to three UART peripherals, a 12-bit ADC, and an internal clock source with FLL trimming. The 5 V-tolerant I/O and ESD/EMC hardening make it suitable for white goods, motor control boards, and factory automation endpoints where the system is exposed to switching transients and discharge events. Architecturally, the KE04 combines a 2-stage Cortex-M0+ pipeline with a single 32-bit flash controller and a peripheral bridge exposing the Kinetis peripheral set to the core. The 80-LQFP footprint (14x14 mm) provides sufficient pin count for full peripheral breakout while remaining hand-solderable for prototype work. Typical applications include BLDC and stepper motor controllers in appliances, industrial sensor interfaces, HVAC control boards, low-end point-of-sale terminals, and any 5 V system replacing legacy 8-bit designs. The wide supply range and integrated analog simplify design-in versus discrete solutions. When designing with this part, ensure your SWD/JTAG header is brought out to a standardized 2x5 0.05" connector to allow field firmware updates. Designers familiar with other Kinetis parts will recognize the peripheral set; KE04 differs from KE02 mainly in flash density and ADC channel count. This page synthesizes distributor pricing, drop-in alternatives (including same-package KE-series variants and cross-package KE04 pinouts), and practical design notes not found in the standard NXP product brief.

Cotação Contato
MKE04Z64VQH4557 - 64KB Flash Kinetis KE04 ARM Cortex-M0+ MCU | NXP
MKE04Z64VQH4557

MKE04Z64VQH4557 - 64KB Flash Kinetis KE04 ARM Cortex-M0+ MCU | NXP

The NXP MKE04Z64VQH4557 is a Kinetis KE04 sub-family 32-bit ARM Cortex-M0+ microcontroller (MCU) integrating 64 KB of flash memory and 4 KB of SRAM in a 64-pin LQFP/QFP package (14x14 mm). It is a member of the 8-bit Kinetis E series designed to replace legacy HC08/HC11 microcontrollers with a low-power 32-bit core. The MKE04Z64VQH4557 runs at up to 48 MHz CPU clock with an operating voltage range of 2.7 V to 5.5 V, supporting direct interfacing with 5 V analog and digital peripherals. A microcontroller (MCU) is an integrated circuit that combines a CPU core, memory (Flash + RAM), peripherals (timers, ADC, communication interfaces), and interrupt control on a single die. The MKE04Z64VQH4557 belongs to the Kinetis E family, which sits within NXP's broader ARM Cortex-M microcontroller portfolio. Its hierarchical classification is: ARM Cortex-M0+ core -> Kinetis E series -> Kinetis KE04 sub-family -> low-power 5 V MCU. This 5 V-tolerant MCU class bridges legacy 8-bit designs and modern 32-bit Cortex-M architectures, providing a software-compatible upgrade path. Key features include an 8-channel, 12-bit SAR ADC with up to 1 Msps sampling, up to 58 available GPIO pins with interrupt capability, two analog comparators (ACMP), a 6-channel PWM/timer module (FTM), one I2C, two UART, and one SPI peripheral. The device includes a low-power Run, Wait, and Stop power modes, plus a 1 kHz low-power timer that operates in Stop mode for wakeup duty cycling. The Kinetis KE04 architecture uses a Cortex-M0+ core with a single-cycle multiplier and a single 32-bit bus matrix that connects core, flash, RAM and AIPS-Lite peripheral bridge. The flash controller supports 8-bit, 16-bit and 32-bit reads to accelerate thumb code execution. The chip implements a 6-channel FlexTimer (FTM) supporting PWM, input capture, and output compare, plus a 16-bit low-power timer (LPTMR) for low-power wakeup duty cycles. Typical applications include industrial control (sensor signal chains, motor drive PWM, building automation), automotive body electronics (LIN slaves, lighting controllers, climate modules), home appliances (washing machines, refrigerators, induction cookers), and low-cost consumer products needing 5 V tolerance with 32-bit performance. The wide 2.7-5.5 V supply lets designers connect directly to 3.3 V or 5 V sensors without level shifters. When designing with this MCU, keep analog and digital ground returns separated to maintain ADC accuracy, place a 100 nF decoupling cap on every VDD pin, and use the CWDT or window watchdog timer to recover from code-locking events in noisy industrial environments. This page synthesizes distributor pricing, drop-in Kinetis family alternatives, and practical design notes not found in the manufacturer datasheet alone.

Cotação Contato
MKE04Z8VWJ4 - Cortex-M0+ 48MHz MCU, 8KB Flash, 20-SOIC | NXP
MKE04Z8VWJ4

MKE04Z8VWJ4 - Cortex-M0+ 48MHz MCU, 8KB Flash, 20-SOIC | NXP

The NXP MKE04Z8VWJ4 is a 32-bit ARM Cortex-M0+ microcontroller from the Kinetis KE04 sub-family, running up to 48 MHz with 8 KB of Flash and 1 KB of SRAM in a 20-pin wide-body SOIC (WB SOIC) package. The part targets cost-sensitive, high-reliability industrial and appliance applications operating in electrically noisy environments, providing enhanced ESD/EMC performance that simplifies compliance with industrial EMI/ESD standards. A microcontroller (MCU) is an integrated circuit that combines a processor core, program memory (Flash), data memory (SRAM), and a rich set of on-chip peripherals (timers, ADC, communication interfaces, GPIO) on a single die. The Cortex-M0+ architecture, as implemented in the KE04, sits in the ARM Cortex-M hierarchy above Cortex-M0 and below Cortex-M3/M4 in performance and feature set, offering Thumb-2 instruction set compatibility, deterministic interrupt latency, and ultra-low power sleep modes. The Kinetis KE04 sub-family further positions the MKE04Z8VWJ4 within the broader NXP Kinetis E series for 5V-tolerant, robust MCU designs. Key features of the MKE04Z8VWJ4 include an integrated analog block with a 12-bit ADC and analog comparator, multiple timer modules (FTM, TPM, LPTMR), communication peripherals including UART, SPI, and I2C, an internal LDO regulator for stable core supply, and a wide operating voltage range supporting both 3.3V and 5V rails. The device's 5V-tolerant GPIO and enhanced ESD/EMC immunity reduce external protection component cost. The Kinetis KE04 architecture uses a 2-stage pipeline Cortex-M0+ core with single-cycle I/O access, enabling deterministic 48 MHz operation at low power. The on-chip Flash controller supports byte-addressable programming and EEPROM-like data storage emulation in the main Flash array. Hardware CRC and a watchdog timer (WDOG) provide functional safety hooks for industrial control loops. Typical applications include household appliances (white goods, motor control front-ends), industrial sensor conditioning, smart metering edge nodes, automotive body electronics (non-safety), and low-cost human-machine interface (HMI) controllers. The wide SOIC package also supports hand-soldering and rework in prototype runs. When designing with this device, ensure that the supply decoupling network uses a 100 nF ceramic capacitor close to each VDD pin and a bulk 4.7 uF capacitor on the main rail. Verify that your code execution timing budget fits within 48 MHz cycles, and confirm that your chosen in-circuit debugger is CMSIS-DAP compatible. This page synthesizes distributor pricing, drop-in Kinetis family alternatives, application guidance, and parametric comparisons beyond the manufacturer datasheet excerpt, helping engineers select and source the MKE04Z8VWJ4 with confidence.

Cotação Contato
MKE14F512VLL16 - Kinetis KE14F 168MHz Cortex-M4F 512KB | NXP
MKE14F512VLL16

MKE14F512VLL16 - Kinetis KE14F 168MHz Cortex-M4F 512KB | NXP

The NXP MKE14F512VLL16 is a Kinetis KE14F microcontroller featuring an ARM Cortex-M4F core running up to 168 MHz with 512 KB of Flash and 64 KB SRAM in a 100-pin LQFP package. It targets 5V-tolerant, robust industrial applications that require deterministic real-time control with rich communication peripherals. A microcontroller (MCU) is a single-chip computer containing a CPU core, Flash program memory, SRAM, and a rich set of on-chip peripherals such as timers, ADCs, communication interfaces (UART, SPI, I2C, CAN), and GPIOs. Within the broader semiconductor taxonomy, MCUs belong to integrated circuits > microcontrollers, sitting between simple 8-bit controllers and full applications processors, and form the core of virtually every embedded system. Key features of the MKE14F512VLL16 include an ARM Cortex-M4F core with single-precision FPU and DSP extensions, 512 KB of on-chip Flash plus 64 KB FlexMemory for EEPROM emulation, 64 KB SRAM, and a high-accuracy 8-channel analog-to-digital converter supporting 12-bit resolution. The device also integrates CAN 2.0B (FlexCAN), multiple UART/SPI/I2C interfaces, a low-power run, wait, and stop modes with multiple wake-up sources, and operates across an extended industrial temperature range from -40C to +105C. The 5V-tolerant I/O enables direct interfacing with legacy industrial sensors and actuators without level shifters. Architecturally, the KE14F combines an efficient Cortex-M4F core with a tightly-coupled peripheral set including a flexible low-power timer subsystem, a motor-control-grade PWM module, and a robust ESD/EMC protection scheme. The integrated FlexCAN module is specifically hardened for industrial CAN networks, and the dual-watchdog architecture with an independent clock source enhances functional safety for safety-critical systems. Typical applications include industrial motor control (BLDC, PMSM, and stepper drives), CAN-enabled building automation nodes, factory automation PLCs and remote I/O, smart energy meters, lighting control systems, and HVAC controllers. The 5V-tolerant GPIO simplifies interfacing with industrial sensors that operate at 5V logic levels. When designing with this device, the engineer must respect the supply decoupling guidelines, route the high-speed analog reference (VREFH) with low-noise traces, and ensure the JTAG/SWD trace length is matched for reliable in-circuit programming. Compared with Kinetis E lower-tier variants, the KE14F adds an FPU and larger memory, making it the preferred choice when floating-point DSP workloads and code density matter. This page synthesizes distributor pricing, drop-in alternatives sourced from NXP's Kinetis KE1xF family, and practical design notes not found in the manufacturer datasheet alone.

Cotação Contato
MKE14F512VLL16557 - 168MHz Cortex-M4F 512KB MCU | NXP
MKE14F512VLL16557

MKE14F512VLL16557 - 168MHz Cortex-M4F 512KB MCU | NXP

The NXP MKE14F512VLL16557 is an ARM Cortex-M4F microcontroller from the Kinetis KE1xF family, featuring a 32-bit core running up to 168 MHz with single-precision FPU and DSP instructions, 512 KB of Flash, and packaged in a 100-pin LQFP (14x14 mm). It targets cost-sensitive industrial and automotive-grade embedded applications where deterministic performance, large memory, and a rich peripheral set are required. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, memory (Flash and RAM), and a wide range of peripherals such as timers, ADC/DAC, communication interfaces, and GPIOs into a single IC. Within the broader semiconductor taxonomy, the MKE14F512VLL16557 sits under microcontroller -> embedded processor -> integrated circuit -> semiconductor, and within NXP's portfolio under Kinetis E series -> ARM Cortex-M4 based MCU. The Cortex-M4F architecture adds IEEE 754 single-precision floating-point and DSP extensions, enabling efficient execution of control-loop algorithms, signal processing, and motor-control math. Key features of this part include 512 KB program Flash, 64 KB SRAM (typical KE1xF configuration), a 12-bit ADC with up to 1 MSPS conversion rate, multiple FlexTimer modules, up to four UART modules, two SPI and two I2C ports, and a CAN 2.0B interface. The device supports operating voltages from 2.7V to 5.5V and an industrial temperature range of -40C to +105C. Technically, the KE1xF family is built on a 90 nm flash process and uses an ARM Cortex-M4F core with a 3-stage pipeline. The 168 MHz core mark delivers 1.25 DMIPS/MHz, sufficient for closed-loop motor control and real-time industrial protocols. The integrated FPU eliminates the need for an external math coprocessor, while DSP instructions accelerate FFT and FIR filter operations used in sensor conditioning. Typical applications include industrial motor control (BLDC/PMSM), building automation, smart metering, HVAC control, point-of-sale terminals, and human-machine interface (HMI) panels. The large 512 KB Flash and broad peripheral mix make it well-suited for protocol stacks such as Modbus, CANopen, and PROFINET that demand both memory and real-time determinism. When designing with the MKE14F512VLL16557, ensure decoupling capacitors are placed close to the multiple VDD/VSS pin pairs of the 100-LQFP package and that the analog supply (VDDA) is filtered separately to achieve the ADC's specified SNR. The NXP Kinetis SDK and Processor Expert configuration tools provide pin-muxing and peripheral initialization code, significantly reducing firmware bring-up time. This page synthesizes distributor pricing (as of 2026-10-19), same-family drop-in alternatives, and practical design notes not consolidated in the manufacturer datasheet.

Cotação Contato
MKE15Z128VLH7557 - 128KB Flash Cortex-M0+ 72MHz MCU | NXP
MKE15Z128VLH7557

MKE15Z128VLH7557 - 128KB Flash Cortex-M0+ 72MHz MCU | NXP

The NXP MKE15Z128VLH7557 is a 32-bit ARM Cortex-M0+ microcontroller from the Kinetis KE1xZ family, featuring 128 KB of flash memory, a 72 MHz CPU core, and an integrated 64-pin LQFP (10x10 mm) package optimized for automotive and industrial control applications. As a member of the KE15Z sub-family, it targets cost-sensitive embedded designs that require a balance of low power consumption, robust peripherals, and automotive-grade reliability. What is a Cortex-M0+ microcontroller? An ARM Cortex-M0+ microcontroller is a 32-bit reduced instruction set computing (RISC) processor core designed by ARM Holdings for ultra-low-power embedded applications. The Cortex-M0+ architecture sits within the broader ARM Cortex-M family (M0, M0+, M3, M4, M7, M33) and provides a bridge between 8/16-bit legacy microcontrollers and higher-performance Cortex-M3/M4 cores. It belongs to the larger taxonomy of microcontrollers (MCU) -> embedded processors -> semiconductors, and it is widely used in automotive body electronics, industrial sensor nodes, and consumer devices where deterministic real-time performance and low active/standby power are critical. Key features of the MKE15Z128VLH7557 include 128 KB of on-chip flash for program storage, up to 72 MHz core frequency with a single-cycle 32-bit x 32-bit multiplier for efficient signal processing, and a comprehensive set of on-chip peripherals. The device integrates multiple low-power modes (Wait, Stop, VLPR, VLPS), hardware CRC, and a flexible interrupt controller to support deterministic real-time operation. The 64-pin LQFP (10x10 mm) package offers ample I/O count for mixed-signal designs while remaining compatible with standard SMT assembly lines. Architecturally, the KE15Z leverages a Cortex-M0+ core with a single AHB-Lite bus matrix connecting flash, SRAM, and peripherals. The 72 MHz operating frequency enables execution of 90 DMIPS (1.25 DMIPS/MHz), and the integrated memory protection unit and bit-banding aliasing provide deterministic memory access for safety-critical applications. An on-chip voltage regulator supports a wide operating voltage range, and the analog mix includes multiple 12-bit ADCs with configurable resolution and sample rates suitable for sensor interface circuits. Typical applications include automotive body controllers, HVAC control modules, seat adjustment ECUs, industrial sensor hubs, low-end motor control, and battery-powered IoT edge nodes. The combination of automotive-grade qualification, robust peripherals, and low-power operation makes it well-suited to designs that must pass stringent automotive EMC and ESD requirements. When designing with the MKE15Z128VLH7557, verify the latest Kinetis KE1xZ reference manual for the complete peripheral pin-out and clock-tree configuration. The 64-pin LQFP package requires a 10x10 mm PCB footprint with 0.5 mm pitch; verify pin 1 orientation against the package marking to avoid reverse-mount failures during production. This page synthesizes distributor pricing, drop-in alternatives within the same LQFP-64 footprint, and practical design considerations not consolidated in the manufacturer datasheet, enabling faster component selection and qualification for automotive and industrial projects.

Cotação Contato