Microcontroladores

Produtos (20.000+)

MK51DX128CLK7 - Kinetis K51 ARM Cortex-M4 MCU 128KB | NXP
MK51DX128CLK7

MK51DX128CLK7 - Kinetis K51 ARM Cortex-M4 MCU 128KB | NXP

The NXP MK51DX128CLK7 is an ARM Cortex-M4 Kinetis K50-series microcontroller running at 72 MHz with 128 KB of flash and 32 KB of SRAM, packaged in an 80-pin LQFP (12x12 mm). It integrates a flexible peripheral set including USB OTG, CAN, I2C, SPI, UART/USART, IrDA, DMA, PWM, LVD, POR, and a watchdog timer, plus 39 general-purpose I/O pins. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (typically Flash), data memory (SRAM), and a rich peripheral set on one die. The Kinetis K50 family sits within NXP's K-series ARM Cortex-M4 microcontrollers, which belong to the broader 32-bit embedded MCU category. Kinetis K50 parts target industrial and automotive motor-control and human-machine interface applications where USB connectivity and analog integration matter alongside deterministic real-time performance. Key features of the MK51DX128CLK7 include 128 KB of on-chip flash, 32 KB SRAM, dual-bank flash architecture for field upgrades, a 12-bit ADC, and integrated USB 2.0 full-speed On-The-Go. The Cortex-M4 core includes a single-precision hardware floating-point unit and a Nested Vectored Interrupt Controller (NVIC) supporting deterministic interrupt latency. An external memory bus is exposed for expanding memory or interfacing to parallel peripherals. The 72 MHz ARM Cortex-M4 core delivers 1.25 DMIPS/MHz, providing efficient signal-processing headroom for motor-control algorithms, sensor fusion, or basic audio processing. The part operates from 1.71 V to 3.6 V, supporting battery-backed designs. The 80-LQFP (12x12) package is a low-profile surface-mount package from the LQFP family with generous thermal dissipation for industrial environments. Typical applications include industrial motor control, factory automation, building control panels, security alarm panels, point-of-sale terminals, USB peripherals, and portable medical devices. The K51 derivative within K50 specifically targets USB-connected and user-interface-focused designs. When designing with the MK51DX128CLK7, ensure the supply rail has sufficient decoupling (typically 100 nF plus 4.7 uF bulk) placed within 5 mm of the package. The 80-LQFP (12x12) footprint simplifies hand-rework and optical inspection compared to fine-pitch QFN parts. This page synthesizes authorized distributor pricing, drop-in alternatives within the Kinetis K50 family, and practical design notes not found in the manufacturer datasheet. Refer to the NXP Kinetis K50 reference manual for full peripheral register definitions.

Cotação Contato
MK51DX128CMC7 - 72MHz Cortex-M4 MCU | NXP | Measurements
MK51DX128CMC7

MK51DX128CMC7 - 72MHz Cortex-M4 MCU | NXP | Measurements

The NXP Semiconductors MK51DX128CMC7 is a 32-bit Arm Cortex-M4 microcontroller operating at 72 MHz, with 128 KB of flash memory, 32 KB of SRAM, 61 I/O, USB connectivity, and high-precision analog integration in a 121-MAPBGA package measuring 8 x 8 mm. The Kinetis K51 device combines a segment LCD interface, USB, serial interfaces, DMA, and measurement-oriented analog peripherals for embedded instrumentation. What is a Kinetis K51 microcontroller? It is a 32-bit embedded microcontroller in NXP's Kinetis portfolio, built around the Arm Cortex-M4 processor core. The MK51DX128CMC7 belongs to the Kinetis K51 measurement MCU family, which targets compact industrial, medical, consumer, and test equipment designs requiring local analog measurement, human-machine interfaces, and USB connectivity. It sits within the hierarchy of microcontroller, embedded processor, semiconductor, and electronic component. Key verified features include a 72 MHz processor clock, 128 KB (128K x 8) program flash, 32 KB SRAM, 61 I/O, and an 8 x 8 mm 121-MAPBGA package. Listed connectivity includes I2C, IrDA, SPI, UART/USART, USB, and USB OTG. Listed peripherals include DMA, I2S, low-voltage detection, power-on reset, PWM, and a watchdog timer. These resources support simultaneous sensor acquisition, communications, display control, and control-loop processing. The device architecture centers on a 32-bit Arm Cortex-M4 core with DSP-capable signal processing. Its high-precision analog integration makes it appropriate for measurement systems, while segment LCD support enables compact local user interfaces without requiring a separate display controller. USB and multiple serial interfaces provide paths for host connectivity, sensor networking, data logging, and configuration. Firmware should use the manufacturer's device configuration, pin multiplexing, clock, analog, and low-power guidance for the exact package variant. Typical applications include digital multimeters, temperature-measurement instruments, medical monitoring equipment, industrial panel meters, USB-connected test tools, and compact data-acquisition systems. In these systems, the MCU can collect sensor inputs, run calibration and filtering, drive a segment display, communicate with an upstream host, and supervise power or peripheral activity. The primary design consideration is BGA layout and firmware portability. A 121-MAPBGA package requires fine-pitch assembly capability and careful escape routing; the selected PCB stack-up, land pattern, solder-mask design, and assembly process must follow NXP guidance. Validate signal integrity for USB and serial interfaces and budget CPU and DMA bandwidth for simultaneous measurement and display updates. This product page combines verified distributor specifications, manufacturer status, package information, and practical design guidance. It distinguishes confirmed values from parameters not supplied in the retrieved sources and avoids inventing pin assignments, electrical limits, or drop-in replacements that were not explicitly verified.

Cotação Contato
MK51DX256CLL10 - K51 100MHz Cortex-M4 MCU, 256KB Flash, 100-LQFP | NXP
MK51DX256CLL10

MK51DX256CLL10 - K51 100MHz Cortex-M4 MCU, 256KB Flash, 100-LQFP | NXP

The NXP MK51DX256CLL10 is a Kinetis K51 sub-family microcontroller built on the ARM Cortex-M4 core, integrating 256KB of program flash and 64KB SRAM in a 100-pin LQFP (14x14 mm) package. The Cortex-M4 core runs at up to 100MHz with single-precision hardware floating-point and DSP extensions, supporting measurement and metering workloads that require deterministic signal processing. The K51 silicon specifically integrates a Segment LCD controller, USB 2.0 full-speed device/host/OTG, and an analog front-end including 16-bit ADC and 12-bit DAC for sensor-driven designs. A microcontroller (MCU) is a System-on-Chip that combines a CPU core, program memory (Flash), volatile memory (SRAM), and a configurable set of peripherals (ADCs, timers, communication interfaces, LCD drivers). It belongs to the broader hierarchy of embedded processors -> microcontrollers -> ARM Cortex-M microcontrollers -> Kinetis K-series measurement MCUs. MCUs form the lowest layer of the embedded control stack, executing bare-metal or RTOS code that interacts directly with hardware signals while requiring no operating system overhead. Key features of the MK51DX256CLL10 include 256KB of dual-bank FlexMemory (Flash + EEPROM emulation), a USB 2.0 OTG controller, a Segment LCD driver supporting up to 8x40 segments, an analog suite with 16-bit Sigma-Delta ADC and 12-bit DAC, and a comprehensive serial block (UART, SPI, I2C, I2S, CAN). The device operates across 1.71V to 3.6V with multiple low-power modes including VLLS0 (deepest sleep, RAM retained). The architecture pairs an ARM Cortex-M4 core with a 16-channel DMA engine and a crossbar switch for simultaneous peripheral/master access without blocking. Freescale/NXP's Kinetis family adds an Enhanced Harvard bus, an MPU for memory protection, and an external bus interface for off-chip memory expansion when the on-chip 256KB Flash is insufficient. Cryptographic acceleration is also integrated for secure bootloader and TLS-style workloads on connected endpoints. Typical applications include single-phase and polyphase electricity meters (segment LCD readout), portable medical instrumentation, industrial sensors with USB diagnostic output, human-machine interfaces requiring LCD plus CAN connectivity, and motor control signal conditioning. The device's 100MHz Cortex-M4 with DSP instructions is well suited to FIR/FFT processing on ADC streams. When designing with this part, note that the 100-LQFP (14x14) footprint is shared with the K50/K51/K52 family, allowing migration without board rework when memory or peripheral needs change. Ensure the Segment LCD bias network is correctly configured if unused to avoid quiescent current drain. This page synthesizes distributor pricing, same-family Kinetis drop-in alternatives, and practical design notes not aggregated on the manufacturer product page.

Cotação Contato
MK51DX256CLL7 - 72MHz Cortex-M4 MCU, 256KB Flash | NXP
MK51DX256CLL7

MK51DX256CLL7 - 72MHz Cortex-M4 MCU, 256KB Flash | NXP

The NXP Semiconductors MK51DX256CLL7 is a Kinetis K51 series 32-bit microcontroller built on the Arm Cortex-M4 core, running at 72 MHz with 256 KB of program Flash and 64 KB of SRAM, housed in a 100-pin LQFP (14x14 mm) package with 57 general-purpose I/O lines. A microcontroller (MCU) is a single integrated circuit that combines a processor core, memory, and peripherals into one chip, forming the lowest level of the embedded system hierarchy: MCU -> embedded processor -> microprocessor-based system. The Kinetis K51 family targets measurement applications by adding a Segment LCD controller, USB, and high-precision analog integration on top of the mid-performance Kinetis portfolio. Key features of the MK51DX256CLL7 include a floating-point-capable Arm Cortex-M4 pipeline at 72 MHz, USB OTG connectivity, a segment LCD driver for glass displays, and flexible low-power peripheral operation. Peripherals include DMA, I2S, low-voltage detection, power-on reset, PWM, and a watchdog timer, giving designers a complete signal-chain controller in one device. Connectivity is provided by I2C, IrDA, SPI, UART/USART, USB, and USB OTG interfaces. The FlexMemory architecture provides scalable Flash and data-storage options, and the part is industrial temperature graded for harsh environments. The 100-LQFP gull-wing, square package suits both hand assembly and standard surface-mount reflow lines. Typical applications include utility metering with segment LCD displays, portable medical measurement instruments, industrial human-machine interfaces, and USB-connected data-acquisition nodes. The segment LCD controller eliminates a dedicated LCD driver IC, while the Cortex-M4 DSP instructions handle filtering and FFT workloads locally. When designing with this MCU, budget the 256 KB Flash against code growth and consider pin-compatible Kinetis family members with larger Flash for a migration path; all Kinetis K-series devices share NXP's MCUXpresso enablement and software SDK. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

Cotação Contato
MK51DX256ZCLL10 - Kinetis K51 100MHz Cortex-M4 MCU, 256KB Flash | NXP Semiconductors
MK51DX256ZCLL10

MK51DX256ZCLL10 - Kinetis K51 100MHz Cortex-M4 MCU, 256KB Flash | NXP Semiconductors

The NXP Semiconductors MK51DX256ZCLL10 is a 32-bit ARM Cortex-M4 microcontroller in the Kinetis K51 measurement family, operating at up to 100 MHz with 256 KB of program flash and 64 KB of SRAM, housed in a 100-pin LQFP (14x14 mm) package. Per the NXP Kinetis K51 datasheet, this MCU integrates a Cortex-M4 core with DSP instructions and a single-precision FPU, segment LCD driver, USB 2.0 full-speed on-the-go, and an analog front-end featuring two 16-bit SAR ADCs with integrated programmable gain amplifiers (up to x64), a 12-bit DAC, two operational amplifiers, and a transimpedance amplifier. A measurement MCU (also called a mixed-signal microcontroller) is a semiconductor that combines a processor core with high-precision analog peripherals specifically engineered for sensor signal acquisition, signal conditioning, and human-machine interface drive. Within the embedded hierarchy, MK51DX256ZCLL10 sits in the MCU -> 32-bit microcontroller -> ARM Cortex-M class -> Kinetis K-series taxonomy, optimized for measurement applications rather than pure control. Engineers typically select this category when they need one-chip integration of metrology-grade analog, a display interface, and standard serial connectivity. Key features of the MK51DX256ZCLL10 include integrated segment LCD controller for glass display drive, USB 2.0 full-speed OTG, multiple low-power modes with run, wait, stop, and VLPR/VLPS, and a 16-bit ADC with PGA supporting both thermistor-style and load-cell sensor inputs. The device also offers up to 70 general-purpose I/O, multiple timers including a programmable delay block and motor-control PWM, and serial interfaces including UART, SPI, and I2C. The 100-pin LQFP package provides ample pin count for mixed-signal designs that need both analog and digital I/O without bus multiplexing. Architecturally, the K51 leverages the Cortex-M4 Harvard bus configuration with single-cycle multiplier, hardware divide, and tightly coupled memory options. The 256 KB flash is organized in a dual-bank layout supporting field firmware upgrades, while the 64 KB SRAM supports simultaneous program execution and data buffering. The combination of segment LCD and high-precision ADC on the same die is what distinguishes the K51 from other Cortex-M4 Kinetis sub-families (K10, K20, K40) that lack this analog bundle. Typical applications include single-phase and polyphase smart electricity meters, multi-function industrial meters (water, gas, heat), medical measurement instruments like blood-pressure monitors and glucose meters, HVAC controllers with display, industrial scales and load-cell amplifiers, USB data loggers, and human-machine interfaces with LCD readout. The integrated transimpedance amplifier and op-amps reduce external analog bill of materials in optical and electrochemical sensor designs. When designing with this MCU, prioritize decoupling capacitor placement near both VDD and VDDA pins, and route analog inputs as short and guarded as possible to preserve 16-bit ADC performance. The segment LCD voltage levels are configured by the chip's charge pump and LCD pin assignments are multiplexed - verify the desired glass pinout against the device's LCD_PIN_MAP register before committing to a PCB layout.

Cotação Contato
MK52DN512CLQ10 - 100MHz Cortex-M4 MCU 512KB Flash | NXP K52
MK52DN512CLQ10

MK52DN512CLQ10 - 100MHz Cortex-M4 MCU 512KB Flash | NXP K52

The NXP Semiconductors MK52DN512CLQ10 is a 32-bit ARM Cortex-M4 microcontroller from the Kinetis K50/K52 sub-family, delivering 100 MHz core performance with 512 KB of Flash and 128 KB of SRAM in a 144-pin LQFP (20x20 mm) package. The device integrates a high-precision analog measurement engine consisting of operational and trans-impedance amplifiers, a 16-bit ADC, a 12-bit DAC, USB 2.0 full-speed, and an Ethernet MAC, all running from a 1.71–3.6 V supply. A K52-sub-family MCU is a low-power, mixed-signal ARM Cortex-M4 microcontroller that combines Cortex-M4 DSP/FPU compute with on-chip analog front-end peripherals, positioning it between a general-purpose MCU and a precision analog front-end IC. In the broader taxonomy it belongs to microcontrollers -> 32-bit microcontrollers -> ARM Cortex-M microcontrollers -> mixed-signal MCUs. The Kinetis K50/K52 series specifically targets precision signal-chain applications where the analog front end is as critical as the digital core. Key features include 100 MHz Cortex-M4 core with single-precision FPU and DSP instructions, 512 KB program Flash, 128 KB SRAM, integrated 16-bit ADC with up to 4 differential or 8 single-ended inputs, two 12-bit DACs, multiple UART/SPI/I2C ports, USB 2.0 full-speed On-The-Go, 10/100 Ethernet MAC with MII/RMII, low-power run, wait, stop, and VLLS modes, and a wide operating voltage range from 1.71 V to 3.6 V. The device is qualified over the -40 C to +105 C industrial temperature range. The architecture pairs an ARM Cortex-M4 core with a Cortex-M4 Memory Protection Unit, a four-channel DMA controller, an embedded voltage regulator with on-chip decoupling, and the analog measurement engine. The combination of DSP-class compute, hardware FPU, and integrated high-resolution ADC/DAC enables single-chip precision measurement designs that previously required a separate DSP and a dedicated analog front-end. Typical applications include industrial process control and PLC analog modules, medical patient-monitoring instruments, smart energy and power-metering endpoints, building automation sensor nodes, and USB- or Ethernet-connected test and measurement equipment. The integrated Ethernet and high-resolution ADC make the part particularly attractive for distributed measurement nodes that must aggregate analog sensor data and publish it on an industrial network. When designing with this part, ensure the analog supply decoupling is placed close to the VDDA pin and that the ADC reference pins are driven from a low-noise source. The 144-LQFP footprint offers generous ground paddle access; tying the exposed pad to a clean analog ground improves ADC performance in precision measurement designs. This page synthesizes verified distributor stock and pricing, drop-in Kinetis-family alternatives, and practical PCB/decoupling notes drawn from the K50/K52 datasheet, providing information not available on the bare manufacturer product page.

Cotação Contato
MK52DN512CMD10 - 100MHz Cortex-M4 Kinetis K50 MCU | NXP
MK52DN512CMD10

MK52DN512CMD10 - 100MHz Cortex-M4 Kinetis K50 MCU | NXP

The NXP MK52DN512CMD10 is a Kinetis K50 series 32-bit microcontroller based on the Arm Cortex-M4 core running at 100 MHz, with 512 KB of on-chip flash memory and 128 KB of SRAM, housed in a 144-pin MAPBGA package measuring 13x13 mm. A microcontroller unit (MCU) is a complete computing system integrated on a single chip, combining a processor core, memory, and peripherals. The Kinetis K50 family sits within NXP's broader Kinetis MCU hierarchy, which is part of the wider Arm Cortex-M embedded processor ecosystem used in industrial and medical electronics. Within this taxonomy, the K50 sub-family is distinguished by its integrated analog measurement engine, positioning it as a measurement-oriented MCU rather than a general-purpose controller. Key differentiating features include the K50 analog measurement engine, which integrates operational amplifiers and trans-impedance amplifiers alongside high-resolution ADC and DAC modules. According to NXP product information, this integration reduces external component count, cuts system cost, and increases design flexibility for precision measurement designs. The Cortex-M4 core includes DSP instructions that, per NXP, increase performance by reducing core interruption overhead. Technically, the device operates from 1.8V, 2.5V, or 3.3V supply rails and provides USB and Ethernet connectivity. Industrial temperature grade classification is indicated by distributor Partstack data. The MAPBGA ball-grid array package offers a compact 13x13 mm footprint with 144 connection balls for high pin-count peripheral expansion. Typical applications are medical instrumentation and industrial measurement systems, where the integrated op amps and high-resolution ADC/DAC modules directly serve sensor signal chains. USB and Ethernet interfaces support connected devices and networked diagnostics. Design consideration: verify flash memory configuration at PCB bring-up, as NXP Kinetis devices in the 512 KB class are offered in multiple flex-memory variants; the MK52DN512CMD10 is listed by DigiKey with 512KB (512K x 8) flash. This page synthesizes distributor availability data, family comparisons, and drop-in alternative guidance not consolidated in the manufacturer datasheet.

Cotação Contato
MK52DN512ZCMD10 - 100MHz Cortex-M4 MCU 512KB Flash | NXP
MK52DN512ZCMD10

MK52DN512ZCMD10 - 100MHz Cortex-M4 MCU 512KB Flash | NXP

The NXP Semiconductors MK52DN512ZCMD10 is a Kinetis K52 (K50 100 MHz family) 32-bit microcontroller with an Arm Cortex-M4 core running at 100 MHz, 512 KB flash memory, 128 KB SRAM, and an integrated analog measurement engine, housed in a 144-ball MAPBGA (13 x 13 mm) package. A microcontroller (MCU) is a single integrated circuit that combines a processor core, memory, and programmable peripherals into one chip, sitting at the heart of embedded systems. Within the hierarchy of embedded processors, an MCU is more integrated than an MPU (microprocessor unit) and less powerful than an applications processor; the Kinetis K5x family belongs to NXP's Kinetis portfolio of Arm Cortex-M based MCUs used across industrial, medical, and consumer electronics. Key features of the MK52DN512ZCMD10 include the 100 MHz Cortex-M4 core with DSP instructions and a hardware floating-point unit, 512 KB of flash for program storage, and 128 KB of SRAM for data and stack. As a K52 sub-family member of the analog-measurement-focused K50 family, it integrates operational amplifiers and trans-impedance amplifiers alongside high-resolution ADC and DAC modules, reducing external component count in precision measurement signal chains. The device also provides USB and Ethernet connectivity per its NXP product page, making it suitable for networked instrumentation nodes. Peripherals are clocked from a flexible clock architecture supporting multiple clock sources and a phase-locked loop for core and bus clock generation. Security capabilities noted by NXP support protected code and data handling in industrial deployments. Typical applications include medical measurement devices such as glucose meters and patient monitoring front ends, industrial metering and data acquisition, and test-and-measurement equipment that benefits from the integrated analog engine. The Ethernet MAC supports connected field devices, while USB enables direct host or device interfaces. A key design consideration: the 144-ball MAPBGA requires careful PCB stack-up and fanout planning; ball-map routing with via-in-pad or dog-bone fanout on at least four layers is typical, and power integrity for the analog measurement modules demands dedicated clean supplies and solid ground planes. This page synthesizes distributor pricing, drop-in alternatives, application guidance, and design notes not found in the manufacturer datasheet alone, with all specifications traced to NXP and distributor data as of 2026-10-18.

Cotação Contato
MK53DN512ZCMD10 - Kinetis K50 Cortex-M4 100MHz MCU | NXP
MK53DN512ZCMD10

MK53DN512ZCMD10 - Kinetis K50 Cortex-M4 100MHz MCU | NXP

The NXP Semiconductors MK53DN512ZCMD10 is a 32-bit ARM Cortex-M4 Kinetis K50 series microcontroller running at 100 MHz with 512 KB (512K x 8) on-chip flash memory, housed in a 144-ball MAPBGA (13x13 mm) package. It operates from 1.8 V, 2.5 V, or 3.3 V supply rails and integrates a floating-point unit and DSP acceleration for embedded applications. A microcontroller unit (MCU) is a single-chip embedded computer that combines a processor core, nonvolatile program memory, SRAM, and a rich set of peripherals on one die. Within the embedded systems hierarchy, the MK53DN512ZCMD10 sits in the Kinetis K5x measurement family (also referenced as the K50 series), a family distinguished by its integrated segment LCD controller and analog measurement peripherals, positioned above general-purpose Kinetis K1x/K2x parts and below the high-performance K6x/K7x tiers. Key features include the 100 MHz Cortex-M4 core with hardware FPU and DSP instructions, 512 KB of flash for program storage, an integrated segment LCD controller (the defining 'MED LCD' feature of this ordering code), and flexible 1.8 V / 2.5 V / 3.3 V operation that suits both battery-powered and industrial 3.3 V designs. The C temperature-grade code targets industrial operating ranges, and the MAPBGA ball-grid package provides high I/O density in a compact 13x13 mm footprint. Technically, the device implements NXP/Freescale's Kinetis architecture built on the ARM Cortex-M4 with a Harvard bus structure, tightly coupled flash acceleration, and peripheral sets including serial interfaces (UART, SPI, I2C), timers, and the analog subsystem typical of the K5 measurement family. Per the NXP product page, the part is described as a 'Flexible 32-bit Arm Cortex-M4F MCU with 512 KB flash memory, floating-point unit and DSP acceleration for embedded applications.' Typical applications include medical measurement instrumentation, industrial control panels with segment LCD displays, portable battery-operated meters, and building automation nodes - all use cases where an integrated LCD controller plus analog measurement peripherals reduce bill-of-material count. Design consideration: because this part is listed NRND (Not Recommended for New Designs) on the NXP product page, new designs should evaluate newer Kinetis successors; the MAPBGA package also requires controlled-impedance, fine-pitch BGA PCB fabrication. This page synthesizes distributor listings, cross-reference comparisons, and lifecycle data not consolidated on the manufacturer page, with verified dates and drop-in alternatives.

Cotação Contato
MK53DX256ZCLQ10 - 100MHz Cortex-M4 K53 Measurement MCU | NXP
MK53DX256ZCLQ10

MK53DX256ZCLQ10 - 100MHz Cortex-M4 K53 Measurement MCU | NXP

The NXP MK53DX256ZCLQ10 is a Kinetis K53 measurement microcontroller built around an ARM Cortex-M4 core with a single-precision floating point unit, operating at up to 100 MHz and integrating 256 KB of flash plus 64 KB of SRAM in a 144-pin LQFP (20x20 mm) package. According to distributor listings, the device exposes a Cortex-M4 core, 256 KB program flash, and 64 KB RAM, and is qualified to industrial-grade temperature and process tolerances. An ARM Cortex-M4 microcontroller is a 32-bit MCU class built on the ARMv7E-M architecture, combining deterministic interrupt response with DSP extensions and an optional FPU. Kinetis K5x devices belong to NXP's K50 measurement family, which itself sits in the K-series microcontroller hierarchy (K0x entry-level → K1x low-power → K2x connectivity → K4x LCD-segmented → K5x analog measurement → K6x/7x high-performance) within NXP's broader Kinetis microcontroller portfolio. The MK53DX256ZCLQ10 specifically targets analog measurement front-ends, integrating an analog measurement engine for medical and industrial applications. Key features include a 32-bit core with FPU, 100 MHz core clock, integrated USB 2.0 full-speed on-the-go (OTG), 10/100 Ethernet MAC, segment LCD controller, programmable gain amplifiers, 16-bit SAR ADC, and 12-bit DAC. The 144-pin LQFP package exposes a wide set of peripherals - UART, SPI, I2C, CAN, FlexTimer, DMA - enabling it to consolidate multiple front-end ICs in a measurement subsystem. The part uses a 1.71V to 3.6V supply rail with on-chip voltage regulation for core logic, providing brown-out detection and low-power stop/standby modes for battery-aware medical or metering designs. The analog chain - PGAs, 16-bit ADC, 12-bit DAC - is designed to drive instrumentation-grade signal conditioning, with internal voltage reference and flexible trigger sources for sample sequencing. Typical applications include medical point-of-care instrumentation (glucometers, blood-pressure monitors), industrial process meters, electronic weighing scales, smart energy / metering endpoints, and multi-parameter patient monitoring. Its USB OTG + Ethernet + segment-LCD integration makes it well suited to standalone or networked instruments with on-glass user feedback. When designing with this MCU, plan the analog front-end routing carefully - separate analog and digital grounds, place the 16-bit ADC reference capacitor near the dedicated REF pins, and use the segment LCD waveforms already generated on-chip to minimize external charge-pump circuitry. The product is currently in NXP's NRND (Not Recommended for New Designs) phase, so verify last-time-buy windows before committing to new production.

Cotação Contato
MK60DN256VMD10 - Kinetis K60 Cortex-M4 100MHz MCU | NXP
MK60DN256VMD10

MK60DN256VMD10 - Kinetis K60 Cortex-M4 100MHz MCU | NXP

The NXP MK60DN256VMD10 is a Kinetis K60 series 32-bit microcontroller built on the ARM Cortex-M4 core, running at up to 100 MHz with 256 KB of on-chip flash memory, housed in a 144-ball MAPBGA package measuring 13 x 13 mm. The DN suffix denotes the 256 KB flash variant with IEEE 1588 Ethernet support, operating from 1.8 V, 2.5 V, or 3.3 V supply rails. A microcontroller (MCU) is a single integrated circuit that combines a processor core, memory (flash for code, SRAM for data), and peripherals on one die, forming the lowest level of the embedded-system hierarchy: MCU -> embedded processor -> system-on-chip -> semiconductor device. Unlike a microprocessor, an MCU requires no external memory chips, making it the default choice for compact, low-power control systems. Key features of the K60 family include the ARM Cortex-M4 core with DSP instructions and a hardware floating-point capable architecture, IEEE 1588 Ethernet MAC for precision networked timing, and advanced analog integration per NXP product documentation. The 100 MHz core clock supports single-cycle MAC operations typical of digital signal processing workloads. The K60 platform is built on NXP's Kinetis common-core architecture, meaning code, tools, and peripherals are shared across the Kinetis K family, simplifying migration between flash densities and package options. The 144-MAPBGA ball grid array provides high I/O density for peripheral-rich designs while remaining surface-mountable with standard reflow processes. Typical applications include industrial Ethernet nodes requiring IEEE 1588 precision time protocol, motor control systems leveraging the Cortex-M4 DSP capability, and embedded networking equipment. The 3.3 V operating range integrates directly with standard industrial logic levels. Designers should verify ball-map compatibility before layout reuse across K60 package variants, and confirm supply sequencing requirements per the manufacturer datasheet. According to NXP, the part is offered in tray packaging for production programming flows. This page synthesizes distributor listings, cross-reference data, drop-in alternatives, and practical design guidance not found in any single manufacturer datasheet.

Cotação Contato
MK60DN512VLQ10 - K60 100MHz Cortex-M4 MCU 512KB | NXP
MK60DN512VLQ10

MK60DN512VLQ10 - K60 100MHz Cortex-M4 MCU 512KB | NXP

The NXP MK60DN512VLQ10 is an ARM Cortex-M4 Kinetis K60 microcontroller built around a 32-bit core running at 100 MHz, integrating 512 KB of program flash and 128 KB of SRAM in a 144-pin LQFP (20 mm x 20 mm) package. It targets connected industrial applications by combining an on-chip 10/100 Mbps Ethernet MAC with hardware cryptography acceleration, IEEE 1588 timestamp support, USB 2.0 full-speed on-the-go, and a 16-bit SAR ADC, all driven from a single 1.71 V to 3.6 V supply. A Kinetis K60 microcontroller is a member of the Cortex-M4 microcontroller family - a 32-bit microcontroller (MCU) class designed for deterministic real-time control with DSP extensions and a single-precision floating point unit. Within the broader taxonomy, it sits as MCU -> ARM Cortex-M MCU -> Kinetis K-series -> industrial-connected sub-family, and NXP positions it as a power-management IC companion for industrial gateway, smart energy, and factory automation designs where deterministic networking and on-chip crypto are deciding factors. Key features include 512 KB flash, 128 KB SRAM, 100 MHz Cortex-M4 with FPU, hardware AES/SHA/Random-Number Generator, USB 2.0 FS OTG, Ethernet 10/100 MAC with IEEE 1588, 16-bit ADC (DSA-aware), 12-bit DAC, multiple timers (FTM, PIT, LPTMR, RTC), and an operating voltage range of 1.71 V to 3.6 V. The 144-LQFP footprint delivers 100 usable GPIO, which is one of the largest in the Kinetis K-series and uniquely suited to multi-peripheral industrial nodes. Architecturally, the K60DN512 implements a Cortex-M4 core with single-precision FPU, a 16-channel DMA controller, 4 KB instruction cache/scratchpad RAM, and a multi-layer AIPS-Lite bus fabric. The integrated Ethernet MAC with 1588 timestamping offloads the CPU from timing-critical packet processing, while the on-chip RNG and AES/SHA engines accelerate TLS / IPSec handshakes common in connected industrial gateways. Typical applications include industrial Ethernet gateways, IEC 61850 / smart-grid substation controllers, factory automation PLCs, networked motor drives, USB-connected instrumentation, and HVAC controllers. The wide 1.71 V - 3.6 V supply range simplifies battery-backed and 3.3 V-rail designs without an additional LDO. When designing with the K60, reserve the upper 32 KB of flash for the IEC 1588-aware Ethernet buffer descriptor table and provision a 25 MHz crystal for the MAC reference clock - the integrated PHY interface does not generate this clock internally. Place a 4.7 uF + 0.1 uF decoupling pair within 5 mm of VDDA for ADC noise floor compliance. This page synthesizes distributor pricing for the LQFP-144 variant, drop-in alternatives within the Kinetis K10/K20/K60 family, and design notes not consolidated in any single distributor product page.

Cotação Contato
MK60DN512VMC10 - 100MHz Cortex-M4 MCU, 512KB Flash | NXP
MK60DN512VMC10

MK60DN512VMC10 - 100MHz Cortex-M4 MCU, 512KB Flash | NXP

The NXP (Freescale) MK60DN512VMC10 is a 32-bit Kinetis K60 microcontroller built on an Arm Cortex-M4 core running at up to 100 MHz, with 512 KB flash, 128 KB SRAM, Full-Speed USB, IEEE 1588 Ethernet, and a 121-pin MAP-BGA (8x8 mm) package. A microcontroller unit (MCU) is a single integrated circuit that combines a processor core, memory, and peripherals into one chip, sitting at the device level of the embedded-systems hierarchy (MCU -> embedded processor -> semiconductor). The Kinetis K60 family belongs to NXP's K-series 32-bit MCUs and targets connected, mixed-signal applications where an Arm Cortex-M4 CPU, analog integration, and industrial networking must coexist on one die. Key features of the MK60DN512VMC10 include the 100 MHz Cortex-M4 core with DSP instructions and a hardware floating-point-friendly pipeline for control loops, 512 KB (512K x 8) of on-chip flash program memory, and 128 KB of SRAM for data and stack. Connectivity spans CAN bus, EBI/EMI external bus, Ethernet, I2C, IrDA, SD, SPI, UART/USART, USB and USB OTG, while on-chip peripherals include DMA, I2S, low-voltage detection (LVD), power-on reset (POR), PWM and a watchdog timer (WDT). The device operates from 1.8 V, 2.5 V or 3.3 V supplies. Technically, the K60 sub-family integrates a 16-channel ADC-class analog front end concept, IEEE 1588 precision time protocol support in its Ethernet MAC, and a crossbar architecture that lets the DMA service multiple masters concurrently. The 121-MAPBGA (8x8 mm) footprint keeps board area compact while exposing 86 GPIO/IO lines for system expansion. Typical applications include industrial automation and motor control nodes requiring CAN and Ethernet, IEEE 1588 networked devices needing precision time synchronization, and USB-connected instrumentation using USB OTG. The combination of 100 MHz DSP capability and rich serial connectivity makes it a strong fit for gateways and data concentrators. Design consideration: the MAP-BGA package requires controlled-impedance PCB layout with via fan-out under the 0.8 mm pitch ball field, so plan the 3.3 V power tree and decoupling network before routing; the alternate 100-LQFP family members exist for hand-solderable designs. This page synthesizes distributor data, same-family drop-in alternatives, and practical design notes beyond what a single datasheet page provides.

Cotação Contato
MK60DN512VMD10 - Kinetis K60 100MHz Cortex-M4 MCU 512KB | NXP
MK60DN512VMD10

MK60DN512VMD10 - Kinetis K60 100MHz Cortex-M4 MCU 512KB | NXP

The NXP Semiconductors MK60DN512VMD10 is a 32-bit ARM Cortex-M4 Kinetis K60 microcontroller operating at up to 100 MHz with 512 KB of flash memory and 128 KB of SRAM, housed in a 144-pin MAPBGA (13x13 mm) package. It features integrated full-speed USB, IEEE 1588 Ethernet MAC, hardware encryption, and advanced analog peripherals including two 16-bit SAR ADCs and two 12-bit DACs. What is a Kinetis K60 microcontroller? K60 is a family of microcontrollers within the Kinetis portfolio built on the ARM Cortex-M4 core, a 32-bit processor architecture designed for embedded applications that require DSP capability and deterministic real-time control. Within the broader taxonomy, the K60 sits at: microcontroller (MCU) -> ARM Cortex-M4 MCU -> Kinetis MCU -> Kinetis K-series (connectivity-focused). It targets industrial connectivity, building automation, smart energy, and motor control applications where Ethernet and USB connectivity are required alongside DSP-class signal processing. The MK60DN512VMD10 integrates a Cortex-M4 core with single-precision floating-point unit and DSP instructions, supported by 512 KB of program flash and 128 KB of SRAM. The device includes a 10/100 Mbps Ethernet MAC with IEEE 1588 precision time protocol hardware acceleration, a USB 2.0 full-speed device/host/on-the-go controller, multiple serial communication peripherals (UART, SPI, I2C, I2S), and a rich analog subsystem including 16-bit SAR ADCs and 12-bit DACs. Hardware encryption and tamper detection features support secure connected designs. The 144-MAPBGA (13x13 mm) package provides 66 general-purpose I/O pins while keeping the board footprint compact. Operating voltage spans 1.71 V to 3.6 V with an industrial temperature range of -40C to +105C, making the part suitable for industrial and consumer embedded designs. The Cortex-M4 DSP extensions enable on-chip audio codec, motor control loops, and signal conditioning without an external DSP. Typical applications include industrial Ethernet nodes (PROFINET, EtherNet/IP, Modbus TCP), building automation controllers, smart energy and metering endpoints, USB peripherals, motor control drives, audio processing, and POS/financial terminals. The IEEE 1588 hardware timestamping makes it particularly suitable for synchronized motion control and distributed real-time networks. When designing with this part, ensure your PCB layout accommodates the 13x13 mm BGA footprint with appropriate microvia stack-up for fan-out routing. Validate BSDL boundary-scan coverage for production test, and reserve boot configuration pins (BOOTCFG0/1) to the correct state at reset for your chosen boot source. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

Cotação Contato
MK60DN512ZVLQ10 - K60 100MHz Cortex-M4 MCU, 512KB Flash | NXP
MK60DN512ZVLQ10

MK60DN512ZVLQ10 - K60 100MHz Cortex-M4 MCU, 512KB Flash | NXP

The NXP MK60DN512ZVLQ10 is a Kinetis K60 100MHz ARM Cortex-M4 microcontroller with 512KB Flash, 128KB SRAM, Full-Speed USB, and 10/100 Ethernet in a 144-LQFP (20x20mm) package. It integrates an IEEE 1588 Ethernet MAC, hardware encryption, and a rich peripheral set targeting industrial connectivity and human-machine interface applications. A microcontroller (MCU) is a single-chip computing system that integrates a CPU core, program and data memory, peripherals, and I/O into one IC. The K60 family belongs to the wider ARM Cortex-M4 microcontroller hierarchy -> 32-bit microcontroller -> RISC MCU -> embedded controller -> semiconductor. Cortex-M4 cores add single-precision floating-point and DSP extensions, positioning K60 parts between deterministic Cortex-M3 controllers and higher-end Cortex-M7 application processors. Key features of the MK60DN512ZVLQ10 include 100MHz Cortex-M4 core with FPU and DSP instructions, 512KB program flash, 128KB SRAM, integrated 10/100 Ethernet MAC with IEEE 1588 timestamping, USB 2.0 Full-Speed with device/host/on-the-go, CAN, I2C, SPI, UART, 16-bit ADC, DAC, comparators, and an LCD controller. The 144-LQFP package provides extensive I/O counts for industrial human-machine interface panels. The device operates from 1.71V to 3.6V across -40C to +105C industrial temperature range. Its 90nm low-leakage CMOS process and integrated voltage regulator permit single-supply operation with flexible power modes (Run, Wait, Stop, VLPR, VLLS). The Ethernet and USB peripherals share a sophisticated DMA fabric that offloads packet handling from the core. Typical applications include industrial Ethernet gateways and PLCs with IEEE 1588 precision-time-protocol support, smart energy meters, building-automation controllers, USB-to-UART bridge adapters, factory automation HMI touch panels, and point-of-sale terminals. The integrated LCD controller is particularly useful for monochrome segment and dot-matrix displays in metering and appliance panels. Designers should plan for decoupling capacitor placement per K60 hardware design guide; an external 32.768kHz crystal is recommended for RTC and the Ethernet timestamp clock. Migration from the earlier MK60DN512VLQ10 (initial silicon) to MK60DN512ZVLQ10 (current silicon) is a true drop-in replacement per NXP community thread confirmation. This page synthesizes distributor pricing, drop-in Kinetis K60 family alternatives, and practical design notes across MCU selection, peripheral allocation, and power-mode configuration not consolidated on any single manufacturer page.

Cotação Contato
MK60DN512ZVMC10 - 100MHz Cortex-M4 MCU 512KB Flash | NXP
MK60DN512ZVMC10

MK60DN512ZVMC10 - 100MHz Cortex-M4 MCU 512KB Flash | NXP

The NXP MK60DN512ZVMC10 is a Kinetis K60 series ARM Cortex-M4 microcontroller running at 100 MHz with 512 KB of embedded flash and 128 KB of SRAM, housed in a 121-pin MAPBGA (8x8 mm) package. The device integrates full-speed USB, IEEE 1588 Ethernet MAC, and analog peripherals for industrial control, motor drive, and connected embedded applications. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (typically flash), working RAM, and a rich set of I/O peripherals into one package. MCUs form the lowest tier of the embedded-computing hierarchy: MCU -> embedded processor -> system-on-chip -> semiconductor. The Cortex-M4 core adds a single-precision floating-point unit and DSP extensions, making Kinetis K60 devices well suited to closed-loop algorithms and digital signal processing tasks that would overwhelm a Cortex-M0/M0+ part. Key features of the MK60DN512ZVMC10 include 512 KB of flash with flexible flash-memory controller, 128 KB of SRAM, USB 2.0 full-speed on-chip transceiver, 10/100 Ethernet MAC with IEEE 1588 precision-time-protocol support, multiple serial communication blocks, a 16-bit SAR ADC, and a wide operating voltage range from 1.71 V to 3.6 V. The 100 MHz core delivers 1.25 DMIPS/MHz while advanced low-power modes allow run, wait, stop, and very-low-power-stop operation for energy-conscious designs. The K60 architecture uses a Cortex-M4 core with a tightly-coupled memory subsystem, a multi-master AHB/APB bus matrix, and a flash-memory controller with a 4-channel RAM, with 128 KB of on-chip SRAM configurable as SRAM, banks, RAM, with 128 KB of on-chip SRAM, banks, RAM, with 128 KB of on-chip SRAM. The 8x8 mm MAPBGA package balances I/O density with reflow-friendly assembly, supporting fine-pitch fan-out for compact PCB layouts while keeping high-speed signal integrity manageable. Typical applications include industrial motor control and variable-frequency drives, building automation and HVAC controllers, smart energy meters with Ethernet connectivity, USB peripherals and human-interface devices, and point-of-sale terminals. The combination of Ethernet, USB, and a Cortex-M4 with FPU is rare at this part-count and price tier, enabling a single-chip solution where competitors typically require an external PHY or co-processor. When designing with this device, provide a stable 3.3 V or lower supply rail to VDD/VBAT, ensure the external 32.768 kHz crystal or oscillator is placed close to XTAL pins to minimize jitter, and follow the NXP reference manual for unlocking the flash-memory controller before in-application programming cycles. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

Cotação Contato
MK60DN512ZVMD10 - 100MHz ARM Cortex-M4 MCU, 512KB Flash, 144-MAPBGA | NXP
MK60DN512ZVMD10

MK60DN512ZVMD10 - 100MHz ARM Cortex-M4 MCU, 512KB Flash, 144-MAPBGA | NXP

The NXP MK60DN512ZVMD10 is a Kinetis K60 series 32-bit microcontroller based on the ARM Cortex-M4 core with FPU, operating at up to 100 MHz and integrating 512 KB of on-chip Flash memory in a 144-pin MAP-BGA (13x13 mm) package. It combines the Cortex-M4 DSP and single-precision floating-point engine with NXP's K60 peripheral set including Ethernet MAC, USB 2.0 full-speed on-the-go, CAN, and hardware encryption acceleration for secure connected designs. A Kinetis K60 MCU is a Cortex-M4-based microcontroller family targeting industrial connectivity, secure networked embedded nodes, and human-machine interface (HMI) applications where deterministic real-time control plus on-board connectivity replace a discrete MCU plus external PHY/bridge design. The K60 sits within NXP's broader Kinetis portfolio (K10/K20/K30/K40/K50/K60/K70) and serves as the high-integration tier that adds Ethernet, crypto, and USB OTG to the lower-tier K50 baseline. Key specifications include 512 KB Flash, 128 KB SRAM, 100 MHz maximum core frequency, 1.71 V to 3.6 V single-supply operation, and a -40C to +105C extended industrial temperature range. The device provides 16-bit SAR ADC, 12-bit DAC, FlexTimer, programmable delay block, low-power touch-sensing interface, and hardware cryptographic acceleration including AES, DES, and true random number generator (TRNG) for secure boot and secure communications. The integrated 10/100 Ethernet MAC with IEEE 1588 timestamp support, hardware encryption accelerator, and USB 2.0 FS OTG controller enable single-chip connected embedded nodes. The 144 MAP-BGA package exposes up to 100 GPIO and supports external memory bus interfaces for SDRAM and NAND/NOR Flash expansion when the internal 512 KB Flash and 128 KB SRAM are insufficient for the application. Typical applications include industrial Ethernet nodes (EtherCAT, PROFINET, EtherNet/IP), secure smart-grid energy meters, building automation gateways, factory automation controllers, secure POS terminals, and HMI panels with integrated touch. The wide 1.71V-3.6V supply range simplifies battery-backed designs and supports both 1.8V and 3.3V system rails from a single regulator. When designing with the K60, place a 100 nF decoupling capacitor adjacent to every VDD pin and a 4.7 uF bulk capacitor near the MAP-BGA's central VDD balls to suppress core-current transients. Enable the watchdog timer and clock-loss detection in production firmware - failure to do so is a common Kinetis field-return root cause per NXP ERB advisories. This page synthesizes distributor pricing, drop-in same-package alternatives, and application-level design notes beyond the manufacturer datasheet summary.

Cotação Contato
MK60DX256VLL10 - Kinetis K60 100MHz Cortex-M4 MCU | NXP
MK60DX256VLL10

MK60DX256VLL10 - Kinetis K60 100MHz Cortex-M4 MCU | NXP

The NXP MK60DX256VLL10 is a 32-bit ARM Cortex-M4 microcontroller from the Kinetis K60 family, featuring a 100 MHz core with DSP instructions, 256 KB of flash, and 64 KB of SRAM, housed in a 100-pin LQFP package measuring 14 x 14 mm. The device integrates a USB 2.0 OTG controller, an Ethernet MAC, and advanced serial communication peripherals, making it a strong fit for connected embedded applications. An ARM Cortex-M4 microcontroller is a 32-bit RISC processor core with DSP extensions and (optionally) a single-precision floating-point unit, designed for deterministic real-time embedded workloads. The K60 belongs to NXP's Kinetis family of mixed-signal MCUs, which sit in the broader taxonomy of ARM Cortex-M microcontrollers -> 32-bit microcontrollers -> microcontrollers (MCUs) -> integrated circuits (ICs) -> semiconductors. K60 sub-family parts add connectivity features such as Ethernet and USB OTG on top of the baseline Kinetis K-series analog and timer integration. Key features of the MK60DX256VLL10 include an operating voltage range of 1.71 V to 3.6 V, ambient operating temperature from -40 C to +105 C, 66 general-purpose I/O pins, multiple low-power modes (Wait, Stop, VLLS), an integrated 16-bit ADC, and hardware cryptographic acceleration. The 100 MHz core with DSP instructions delivers 1.25 Dhrystone MIPS per MHz, giving ~125 DMIPS of integer compute. The combination of USB OTG, Ethernet, CAN, and FlexBus allows the device to act as a protocol bridge or as a networked sensor node. Typical applications include industrial Ethernet gateways, USB peripherals and device controllers, point-of-sale terminals, building automation controllers, and smart energy metering. The wide operating voltage and 105 C ambient rating also suit factory automation nodes that must survive warm enclosures. Designers should budget for an external 32 kHz RTC crystal and follow the reference PCB layout from the NXP K60 reference manual to ensure USB and Ethernet signal integrity. The internal DC-DC converter pin must be left unconnected on the LQFP-100 variant; on internal regulator parts, follow the recommended bulk + decoupling network exactly. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes drawn from the NXP K60 reference manual - information that the bare datasheet does not surface in one place.

Cotação Contato
MK60FN1M0VLQ12 - K60 120MHz Cortex-M4F 1MB Flash MCU | NXP
MK60FN1M0VLQ12

MK60FN1M0VLQ12 - K60 120MHz Cortex-M4F 1MB Flash MCU | NXP

The NXP Semiconductors MK60FN1M0VLQ12 is a Kinetis K60 sub-family 32-bit ARM Cortex-M4F microcontroller integrating 1 MB of Flash and 128 KB of SRAM, operating at up to 120 MHz core frequency in a 144-pin LQFP (20x20 mm) package. It features dual USB 2.0 On-The-Go controllers (Full-Speed plus High-Speed), an IEEE 1588 Ethernet MAC, hardware encryption, and a 16-bit ADC subsystem, positioning it for industrial control and connected-embedded designs. A 32-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, peripherals, memory, and interface controllers into one package, enabling embedded intelligence in everything from appliances to automotive ECUs. The Cortex-M4F core adds a single-precision FPU and DSP extensions, while the Kinetis K-series sits within NXP's broader ARM Cortex-M portfolio targeting scalable performance from 50 MHz ultra-low-power variants up to multi-gigahertz crossover MCUs. This places the MK60FN1M0VLQ12 in the mid-performance tier optimized for mixed control + connectivity workloads. Key features of the MK60FN1M0VLQ12 include 1 MB Flash, 128 KB SRAM, 120 MHz maximum CPU frequency, supply voltage range of 1.71 V to 3.6 V, operating temperature range of -40C to +105C, integrated full-speed plus high-speed USB OTG, 10/100 Mbps Ethernet MAC with IEEE 1588, and a 16-bit SAR ADC. The LQFP-144 (20x20 mm) package exposes up to 100 GPIO pins, multiple serial peripherals (UART, SPI, I2C), an SDHC controller, and a flexible FlexTimer/PWM subsystem. Architecturally, the MK60FN1M0VLQ12 uses the Cortex-M4F core with NVIC, DSP instructions, and an FPU, paired with crossbar switch and AIPS-Lite peripheral bridges that allow simultaneous DMA-driven peripheral access without stalling the core. Hardware encryption is supported through on-chip acceleration, enabling secure boot, AES, and hashing without offloading to software. Typical applications include industrial Ethernet control nodes, USB audio interfaces, point-of-sale terminals, smart energy metering, building automation gateways, and motion-control drives. The combination of Ethernet plus dual USB plus 1 MB Flash is particularly well-matched to gateways that aggregate multiple fieldbus segments. When designing with this MCU, verify that the supply rail respects the 1.71 V to 3.6 V range and use low-ESR decoupling at each VDD/VSS pair. For USB high-speed operation, the dedicated PLL must be configured before enabling the HS controller; ignoring this prevents USB enumeration. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

Cotação Contato
MK60FN1M0VMD12 - 1MB Flash Cortex-M4F Kinetis MCU | NXP
MK60FN1M0VMD12

MK60FN1M0VMD12 - 1MB Flash Cortex-M4F Kinetis MCU | NXP

The NXP MK60FN1M0VMD12 is a Kinetis K60 series 32-bit ARM Cortex-M4F microcontroller delivering 120 MHz CPU performance with 1 MB of on-chip Flash and 128 KB of SRAM in a 144-pin MAPBGA (13x13 mm) package. It integrates dual USB (Full-Speed + High-Speed), 10/100 Ethernet MAC, and a rich peripheral set including FlexBus, SDRAM controller, and motor-control timers, making it a high-end member of the K60 sub-family. A Kinetis K60 MCU is an ARM Cortex-M4F microcontroller from NXP's Kinetis family of Cortex-M based devices. Kinetis microcontrollers span low-power K0/K1 (Cortex-M0+), mainstream K2x (Cortex-M4), high-performance K6x (Cortex-M4F with FPU + DSP), and application-specific K7x/K8x variants. The K60 specifically targets industrial control, connectivity-rich embedded designs, and human-machine interface (HMI) applications where Ethernet, USB, and graphics LCD support are required. Key features include the ARM Cortex-M4F core with single-precision FPU and DSP instructions, 120 MHz maximum CPU frequency, 1 MB Flash with FlexMemory EEPROM emulation, 128 KB SRAM, integrated 10/100 Ethernet MAC with IEEE 1588 timestamp support, USB 2.0 Full-Speed on-the-go plus USB 2.0 High-Speed PHY, and a 16-bit SAR ADC. Operating voltage is 1.71 V to 3.6 V with industrial temperature range of -40C to +105C. The MK60FN1M0VMD12 is fabricated in 90 nm TFS technology, providing deterministic interrupt latency and low-power run modes down to approximately 200 uA/MHz. Its Cortex-M4F DSP extensions enable efficient audio decoding and sensor fusion on-chip without external DSP ICs. The integrated 144-pin MAPBGA exposes 16 ADC channels, two FlexCAN modules, three SPI, three I2C, and two UART peripherals for broad system connectivity. Typical applications include industrial Ethernet-connected PLCs, USB-equipped HMI panels, building automation gateways, motor-control inverters, and audio-enabled point-of-sale terminals. The combination of Ethernet + dual USB + large memory uniquely fits IoT gateways and factory-automation controllers. Designers should plan for a 4-layer PCB with impedance-controlled USB differential routing when using the integrated HS-USB PHY, and follow NXP's K60 hardware design guidelines for SDRAM interface layout. An external 25 MHz or 50 MHz crystal is required for the Ethernet PHY reference clock. Free development is supported via MCUXpresso IDE with the older KSDK 1.x for this 120 MHz K60 sub-family. This page synthesizes distributor pricing, drop-in alternatives from the Kinetis K60 family and competitor Cortex-M4F parts, and practical design notes not found in the manufacturer datasheet.

Cotação Contato
MK60FX512VMD12 - Kinetis K60 120MHz Cortex-M4 MCU, 512KB Flash | NXP
MK60FX512VMD12

MK60FX512VMD12 - Kinetis K60 120MHz Cortex-M4 MCU, 512KB Flash | NXP

The NXP MK60FX512VMD12 is a 32-bit ARM Cortex-M4 microcontroller from the Kinetis K60 sub-family operating at up to 120 MHz, integrating 512 KB of Flash memory plus 512 KB of FlexMemory and 128 KB of SRAM in a 144-pin MAPBGA (13x13 mm) package. It combines high-performance DSP and FPU support with on-chip USB 2.0 Full-Speed/High-Speed, 10/100-Mbit Ethernet MAC, CAN, and a wide set of analog and timing peripherals. A Kinetis microcontroller (MCU) is a family of ARM Cortex-M based mixed-signal system-on-chip devices designed for industrial, automotive, and consumer embedded designs. Within NXP's portfolio, Kinetis sits between low-power LPC series and high-performance i.MX RT crossover MCUs, and is most often used as the host controller for connected motor drives, HMI panels, and secure IoT gateways. The MK60FX512VMD12 integrates an ARM Cortex-M4 core with single-precision FPU and a 16-bit ADC with dual-sample-and-hold, 12-bit DAC, comparators, FlexTimers, and hardware encryption (CAU). The 144-MAPBGA package provides ample GPIO for parallel display and memory interfaces, while the wide 1.71 V to 3.6 V supply range allows single-rail operation from a single Li-Ion or 3.3 V system supply. Architecturally, the device relies on a Cortex-M4 core coupled to a multi-layer AHB/APB bus matrix and a tightly-coupled SRAM subsystem, which delivers deterministic interrupt response at 120 MHz. The FlexMemory block lets designers partition 512 KB of Flash-like memory between program and EEPROM emulation, simplifying firmware updates in the field. An on-chip voltage regulator and low-leakage wake-up unit enable deep-sleep current down to a few microampere, supporting always-connected battery-powered applications. Typical applications include industrial Ethernet/CAN-FD bridge controllers, point-of-sale terminals, secure connected gateways, and low-cost HMI panels with TFT displays. The integrated USB 2.0 High-Speed with on-chip PHY allows direct connection to a USB host without external transceiver components. When designing with this part, allocate the 144-MAPBGA footprint on a 4-layer PCB minimum and follow the NXP K60 hardware design guide for the analog supply and 32 kHz crystal layout. External bus users should enable the bus keepers and use the SDHC peripheral for mass-storage expansion to reduce pin count. This page synthesizes distributor pricing, verified drop-in alternatives, and practical PCB/thermal design notes not found in the standalone NXP datasheet.

Cotação Contato
MK61FN1M0VMJ15 - 150MHz Cortex-M4 K61 MCU, 1MB Flash | NXP
MK61FN1M0VMJ15

MK61FN1M0VMJ15 - 150MHz Cortex-M4 K61 MCU, 1MB Flash | NXP

The NXP Semiconductors MK61FN1M0VMJ15 is a Kinetis K61 series 32-bit microcontroller built on the ARM Cortex-M4 core with FPU, running at 150 MHz, integrating 1 MB of flash and 128 KB of SRAM, and housed in a 256-pin MAPBGA package (17x17 mm). It targets Ethernet-connected, USB-equipped industrial and consumer applications, combining high-performance signal processing with low-power operation. A microcontroller (MCU) is a single-chip processor integrating a CPU core, memory (flash/RAM), peripherals, and I/O on one die, used to sense, control, and communicate in embedded systems. The MK61 sits within the Cortex-M4 family (ARM Cortex-M -> 32-bit MCU -> microcontroller -> semiconductor), giving engineers deterministic real-time control plus DSP extensions. Key differentiating specifications include: 1 MB flash, 128 KB SRAM, hardware encryption acceleration (MMCAU), tamper detection, IEEE 1588 Ethernet MAC, USB 2.0 full-speed on-the-go, and anti-tamper pins. The 150 MHz core delivers 1.25 DMIPS/MHz with single-precision FPU for sensor fusion and audio processing. Operating voltage spans 1.71-3.6 V with multiple low-power modes (Run/Wait/Stop/VLPR/VLPS) for battery-friendly designs. Architecturally, the device pairs the Cortex-M4F core with a high-bandwidth AIPS-Lite bus matrix, dual 16-bit ADCs (up to 1.2 MSPS), DAC, FlexTimer modules, and an integrated PHY-less Ethernet MAC. The on-chip flash accelerator delivers zero-wait-state performance, supporting deterministic 150 MHz code execution. Typical applications include industrial Ethernet nodes (PROFINET, EtherNet/IP gateways), USB peripherals, secure POS terminals, smart metering, building automation, and anti-tamper security panels. The MMCAU encryption engine and tamper pins make it well suited for payment terminals and metering devices. When designing with the MK61, ensure PCB layout accommodates the 256-ball MAPBGA escape pattern, observe the 1.71-3.6 V supply range, and route Ethernet differential pairs with controlled impedance per IEEE 802.3. This page synthesizes distributor pricing, drop-in K6x family alternatives, and practical K61 application notes not found on the manufacturer's parametric page alone.

Cotação Contato
MK61FX512VMD15 - 150MHz Cortex-M4 512KB MCU | NXP
MK61FX512VMD15

MK61FX512VMD15 - 150MHz Cortex-M4 512KB MCU | NXP

The NXP Semiconductors MK61FX512VMD15 is a 32-bit ARM Cortex-M4 Kinetis K61 microcontroller running at 150 MHz with 512 KB flash, 512 KB FlexMem (configurable as additional flash or EEPROM), and 128 KB RAM, housed in a 144-pin MAPBGA (13 x 13 mm) package. A microcontroller unit (MCU) is a single integrated circuit that combines a processor core, memory, and peripherals into one chip, forming the lowest tier of the embedded computing hierarchy: microcontroller -> embedded processor -> system-on-chip -> application processor. The Kinetis K61 sub-family sits at the high-performance end of NXP's Kinetis K-series MCU portfolio, targeting control algorithms, sensor data processing, and audio processing where computational headroom and security are both required. Key features of the MK61FX512VMD15 include the 150 MHz Cortex-M4 core with DSP instructions and floating-point unit, dual USB controllers (2x USB), an Ethernet MAC with IEEE 1588 support, and NXP's DryIce anti-tamper and encryption technology. The 512 KB FlexMem partition can be reallocated between program flash and emulated EEPROM, giving designers flexible non-volatile memory management for data logging and parameter storage. Technically, the device operates from 1.8V, 2.5V, or 3.3V supplies (per Arrow product data) and integrates analog and digital peripherals typical of the Kinetis K-family platform, including high-speed ADCs, timers, and serial interfaces. The M4F core's hardware FPU accelerates control loops and audio DSP algorithms, while the hardware crypto and tamper-detection subsystems protect firmware and sensitive data in connected industrial equipment. Typical applications include secure industrial automation nodes, networked motor-control and power-conversion systems, building control with Ethernet connectivity, medical instrumentation requiring tamper resistance, and audio processing endpoints leveraging the core DSP capability. When designing with this device, plan power-supply sequencing for the multi-rail operation and account for the 144-ball BGA layout early, since the package requires controlled-impedance routing for Ethernet and USB signals. This page synthesizes distributor pricing, drop-in alternatives within the Kinetis K-series, and practical design notes not found in the manufacturer datasheet alone.

Cotação Contato
MK61FX512VMJ15 - Kinetis K61 150MHz Cortex-M4F MCU, 512KB Flash | NXP
MK61FX512VMJ15

MK61FX512VMJ15 - Kinetis K61 150MHz Cortex-M4F MCU, 512KB Flash | NXP

The NXP MK61FX512VMJ15 is a Kinetis K61 sub-family 32-bit ARM Cortex-M4F microcontroller running up to 150 MHz with an integrated single-precision FPU, 512 KB of program flash plus 512 KB of FlexMemory, and 128 KB of SRAM, housed in a 256-pin MAPBGA (17x17 mm) package. According to the NXP K61 sub-family datasheet, the device combines high-performance digital signal processing, two USB controllers (one with on-chip HS/FS PHY), a 10/100 Mbps Ethernet MAC with IEEE 1588 timestamp support, hardware encryption (AES, DES, 3DES, RSA, SHA), and a rich analog/mixed-signal peripheral set including 16-bit ADCs, DACs, comparators, and a flexible low-power timer subsystem. The part is qualified over the -40C to +105C industrial temperature range and supports 1.71V to 3.6V single-supply operation. A Kinetis microcontroller is a high-performance Cortex-M4F-based MCU with tightly integrated peripherals aimed at industrial connectivity, motor control, and secure IoT endpoints. MK61FX512VMJ15 belongs to the K60/K61/K70 family that shares ARM Cortex-M4 cores, peripherals, and software compatibility, allowing code reuse across performance, memory-density, and feature variations within one ecosystem. Key features of MK61FX512VMJ15 include 150 MHz Cortex-M4F core with DSP instructions, 512 KB flash + 512 KB FlexMemory (EEPROM emulation), 128 KB SRAM, two USB controllers (HS/FS USB 2.0 OTG), Ethernet MAC with 1588 support, anti-tamper pins, hardware cryptographic acceleration, 16-bit SAR ADC, 12-bit DAC, multiple FlexTimers, low-power run/wait/Stop modes, and 256-pin MAPBGA package offering compact board layout for industrial designs. Architecturally the K61 integrates an ARM Cortex-M4F core with FPU and DSP extensions, a multi-purpose DMA engine, crossbar switch for concurrent master access to RAM and peripherals, and a wide peripheral set. The hardware crypto module accelerates symmetric and asymmetric algorithms offloading the CPU for TLS/DTLS, secure boot, and data-at-rest protection. Typical applications for MK61FX512VMJ15 include industrial control PLCs, secure IoT gateways, motor control drives, smart energy metering, point-of-sale terminals, and audio processing systems. The 150 MHz DSP core plus hardware crypto make it well-suited for deterministic real-time control with secure cloud connectivity. When designing with this device, pay close attention to decoupling capacitor placement around the 256-ball MAPBGA and follow NXP's PCB layout recommendations to maintain signal integrity on high-speed USB and Ethernet interfaces. Plan firmware around the Kinetis SDK and Processor Expert for fast peripheral bring-up. This page synthesizes distributor pricing, drop-in alternatives from the same Kinetis K6x family, and practical design notes not found in the manufacturer datasheet alone.

Cotação Contato