Microcontroladores

Produtos (20.000+)

MPC885CVR133-FR - PowerQUICC 133MHz 32-Bit MPU | NXP
MPC885CVR133-FR

MPC885CVR133-FR - PowerQUICC 133MHz 32-Bit MPU | NXP

The NXP MPC885CVR133-FR is a PowerQUICC communications processor built on Power Architecture technology, integrating a 133MHz 32-bit MPC8xx core with on-chip peripherals for networking and embedded communications. The device is offered in a 357-ball PBGA package (25 mm x 25 mm) and delivers up to 176 MIPS of integer performance. A PowerQUICC processor is a family of integrated communications-oriented microprocessors that combine a Power Architecture CPU core with system integration units such as memory controllers, peripheral interfaces, and dedicated communications engine blocks. The MPC885 sits within the broader taxonomy of Power Architecture microprocessor -> embedded MPU -> communications processor -> PowerQUICC family -> NXP MPC8xx sub-family, and is widely used in routers, DSLAM line cards, industrial control and legacy telecom equipment where integrated peripherals reduce BOM cost. Key features of the MPC885CVR133-FR include 133 MHz core frequency, 32-bit data path, integrated CPM (Communications Processor Module) supporting HDLC, Ethernet, UART, and SPI channels, 16KB instruction cache and 8KB data cache, and a 32-bit memory controller with DRAM support. The part number suffix -FR denotes a lead-free / RoHS-compliant PBGA variant, suitable for modern assembly lines. The architecture pairs the PowerPC core with a separate RISC-based CPM that handles DMA and serial protocol processing independently of the core, offloading network traffic and freeing the CPU for application-layer processing. This dual-engine design is the principal engineering value of the PowerQUICC family and remains relevant in long-lifecycle industrial designs. Typical applications include SOHO routers, ISDN terminal adapters, industrial Ethernet gateways, legacy telecommunications line cards, and embedded control boards requiring integrated serial channels. The wide peripheral set reduces external chip count versus competing solutions that require a separate MAC or serial controller. A practical design consideration: power dissipation scales roughly with clock frequency, so 133 MHz operation draws more current than the 66 MHz or 80 MHz variants in the MPC885 family. For battery-backed or thermally constrained enclosures, evaluate the MPC885CVR80 or MPC880 family before committing to the 133 MHz SKU. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in a single manufacturer datasheet, with all data traceable to the cited sources.

Cotação Contato
MPC885CVR66-FR - 66MHz PowerQUICC MPU, 357-PBGA | NXP
MPC885CVR66-FR

MPC885CVR66-FR - 66MHz PowerQUICC MPU, 357-PBGA | NXP

The NXP MPC885CVR66-FR is a PowerQUICC communications processor built on Power Architecture technology, integrating an MPC8xx 32-bit core running at 66 MHz (delivering 87 MIPS per the manufacturer data) into a 357-ball PBGA (25x25 mm) package. It supports a 3.3 V supply domain with an internal core voltage of 1.9 V, and is qualified for an extended -40 C to +100 C operating range targeting industrial and communications infrastructure. Background: A PowerQUICC (PowerPC QUICC) MPU is an embedded microprocessor that combines a Power Architecture CPU core with on-chip peripherals originally designed for networking, telecom, and industrial control. The MPC8xx family pioneered the integration of a communications processor module (CPM) with a general-purpose core, enabling a single chip to handle both protocol processing and control-plane tasks. The MPC885 sits within the broader taxonomy: microprocessor -> embedded MPU -> PowerQUICC family -> communications processor -> Power Architecture device -> semiconductor. Key differentiating features of the MPC885CVR66-FR include the integrated CPM supporting multiple serial channels (FCCs, SCCs, SMC, SPI, I2C), a 32-bit RISC communications engine, dual 10/100 Ethernet MAC support via the FCCs, a 32-channel DMA controller, and memory control for SDRAM, SRAM, EPROM, and flash. The integrated peripherals eliminate external protocol bridges and reduce BOM cost in router, switch, and access-multiplexer designs. From an architectural perspective, the MPC885CVR66-FR uses a 0.18 micrometer process and separates the 3.3 V I/O supply from the 1.9 V core supply, allowing low core power dissipation while maintaining 5 V-tolerant I/O on selected interfaces. The CPM offloads serial DMA, HDLC/PPP framing, and ATM SAR work from the core, freeing CPU cycles for routing and management-plane software. Typical applications include WAN access routers, ISDN terminal adapters, xDSL modems and CPE, industrial serial-to-Ethernet gateways, and legacy telecom control boards. The combination of 87 MIPS core performance and integrated communications controllers makes it suitable for low-to-mid throughput edge devices where a single-chip solution lowers cost and board area. When designing with this part, ensure the 1.9 V core regulator is sequenced correctly relative to the 3.3 V I/O rail, observe the 357-ball PBGA ballout for power/ground ball distribution to maintain signal integrity, and verify that the CPM firmware matches the silicon revision. Refer to the manufacturer hardware specifications for the exact thermal design current per supply domain. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes that extend beyond the manufacturer datasheet.

Cotação Contato
MPC885CZP133 - 133MHz PowerQUICC MPU, 357-PBGA | NXP
MPC885CZP133

MPC885CZP133 - 133MHz PowerQUICC MPU, 357-PBGA | NXP

The NXP MPC885CZP133 is a 133 MHz 32-bit PowerQUICC microprocessor (MPU) from the MPC8xx family, integrating an embedded Power Architecture core with a dedicated communications processor module (CPM) in a 357-ball PBGA package (25x25 mm). The part delivers up to 133 MHz core frequency with 16 KB unified cache, supports a 1.7V to 1.9V core supply, and is qualified over the -40C to +100C industrial temperature range, targeting embedded networking and telecom equipment. A PowerQUICC (Power Architecture with Communications) processor is a class of integrated microprocessor that combines a general-purpose CPU core with a separate RISC-based communications engine on a single die. It sits within the broader hierarchy: microprocessor -> embedded MPU -> PowerQUICC -> communications processor -> Power Architecture technology. This integration reduces system bill-of-materials and enables deterministic handling of multiple serial channels simultaneously, which is essential in routers, switches, and access multiplexers where the CPU alone cannot service the sustained interrupt load of TDM and packet traffic. Key differentiating features include the on-chip CPM with separate RISC engine, dual 8 KB instruction/data caches, a powerful memory controller supporting DRAM, SRAM, Flash, and PCMCIA, integrated security engine, and multiple serial communication controllers (SCCs, SMCs) for HDLC/SDLC, UART, BISYNC, SPI, and I2C. The MPC885 is the superset device of the MPC880/MPC885 family, with the 'CZ' suffix denoting the 357-PBGA package and '133' indicating the 133 MHz core speed grade. The architecture integrates the PowerPC 8xx core with a 32-bit data path, hardware multiply/divide, and four instruction units. The CPM operates at a configurable baud-rate generator clock and supports up to eight serial channels concurrently, offloading the core. Internal 32-bit address bus, 32-bit data bus, and dedicated PCMCIA/USB interfaces make the device suitable for integrated access platforms and customer-premises equipment. Typical applications include networked routers, DSLAM line cards, ISDN terminal adapters, T1/E1 multiplexers, and industrial control with serial-intensive I/O. The wide peripheral set also fits customer-premises gateways, set-top boxes, and embedded Linux appliances that require deterministic serial handling. When designing with this part, ensure a stable 1.8V supply with bulk decoupling near the BGA, follow NXP AN2130 PCB layout guidelines for 357-PBGA fan-out, and verify JTAG access before board bring-up. The 357-BGA package demands at least four routing layers; plan stack-up and via-in-pad early. This page consolidates distributor pricing, drop-in alternatives in the same 357-PBGA footprint, and practical design notes not assembled in any single manufacturer document.

Cotação Contato
MPC885CZP66 - 66MHz PowerQUICC MPU, 32-Bit, 357-BGA | NXP
MPC885CZP66

MPC885CZP66 - 66MHz PowerQUICC MPU, 32-Bit, 357-BGA | NXP

The NXP Semiconductors MPC885CZP66 is a PowerQUICC communications processor built on a 32-bit Power Architecture core, operating at 66 MHz with a 0.18 micrometer CMOS process and packaged in a 357-pin PBGA measuring 25 x 25 mm. It integrates a 32-bit RISC CPU core, a flexible system interface unit, and a communications processor module (CPM) tailored for networking, telecom, and embedded control designs. The device is qualified for the industrial -40C to +100C operating range and supports a 3.3 V I/O supply typical of the MPC8xx family. A microprocessor (MPU) is a single-chip processor that integrates a central processing unit, cache, memory controller, and peripheral interfaces onto a single die. The PowerQUICC family sits within the broader taxonomy of embedded processors, bridging traditional microcontrollers and high-end application processors. The MPC8xx series specifically targets communications-intensive applications where deterministic I/O handling and integrated peripheral channels reduce total system cost and board complexity. Key features include a 66 MHz core clock, a 32-bit data bus, 1 CPU core, a 357-ball grid array surface-mount package, MSL Level 3 moisture sensitivity, and integrated communications peripherals. The 25 x 25 mm PBGA offers robust thermal dissipation through bottom-side balls, while the 0.18 micrometer process balances performance with low static power consumption suitable for always-on infrastructure. The CPM offloads communication tasks from the core, including HDLC, UART, and Ethernet MAC support, allowing deterministic wire-speed handling without CPU intervention. Internal dual-port RAM and configurable serial channels make the device well suited for legacy router, bridge, and industrial gateway designs that must maintain pin-compatible software across product generations. Typical applications include industrial routers, telecom DSLAM line cards, factory automation controllers, point-of-sale terminals, and legacy protocol converters. The wide industrial temperature range also makes it suitable for outdoor or uncontrolled-environment embedded systems requiring long-life silicon. When designing with this device, allocate adequate PCB area for the 357-ball BGA fanout and ensure controlled-impedance routing for memory and CPM interfaces. A multi-layer PCB with dedicated power and ground planes is strongly recommended to maintain signal integrity at 66 MHz core speeds. This page synthesizes distributor pricing, verified same-brand alternatives, and engineering trade-off notes not found in the standalone datasheet, helping engineers and procurement teams evaluate the MPC885CZP66 against current alternatives.

Cotação Contato
MPC885VR133 - 133MHz PowerQUICC MPU 32-Bit | NXP | Networking
MPC885VR133

MPC885VR133 - 133MHz PowerQUICC MPU 32-Bit | NXP | Networking

The NXP MPC885VR133 is a 133 MHz 32-bit PowerQUICC communications processor integrating an embedded MPC8xx core with a separate RISC-based Communications Processor Module (CPM), delivering approximately 176 MIPS for networking and telecom systems. Housed in a 357-ball PBGA (25x25 mm) package, it provides 8 KB instruction cache, 8 KB data cache, a powerful memory controller, and on-chip security features for industrial operating temperature (0 to +95C). What is a PowerQUICC processor? A PowerQUICC (pronounced "powerquick") is a family of communications processors built on Power Architecture technology that combines a general-purpose embedded CPU with a separate, dedicated RISC engine - the CPM - to handle low-level networking and serial communications tasks. In the system hierarchy, the MPC885 family sits at the intersection of MPU (microprocessor unit), embedded processor, and communications controller, superseding older Motorola 68k designs for routers, switches, and industrial control. The CPM off-loads DMA, HDLC, ATM, Ethernet, USB, and serial protocols from the host CPU, freeing the core for application and management-plane code. Key features include CPU frequencies of 66/80/133 MHz, 32-bit data bus width, integrated peripheral interfaces (Ethernet, USB, serial, I2C, SPI), 4.9W typical power dissipation, and parallel I/O via the 357-PBGA footprint. The MPC885VR133 variant excludes the LCD controller present on the MPC885 (the "V" suffix denotes reduced peripheral set versus "C" full-featured; the "R" denotes tape-and-reel packaging). Architecturally, the device combines the MPC8xx core with the CPM, two independently programmable 8 KB caches, dual 10/100 Ethernet MACs, USB 1.1, and an industrial memory controller supporting DRAM, SDRAM, ROM/Flash, and EDO. The on-chip security engine supports DES, 3DES, AES, MD-5, and SHA-1 for VPN/IPsec offload. Typical applications include industrial routers, telecom equipment, network switches, and embedded communications controllers. The MPC885VR133 suits designs requiring low-power operation, integrated Ethernet switching, and cryptographic offload. Consider the MPC880VR133 (without crypto) or MPC885CVR133 (with LCD controller) for variants in the same 357-PBGA footprint. When designing in the MPC885VR133, ensure the power supply sequencing meets the core/IO rail requirements and place decoupling capacitors close to the PBGA balls. The 357-BGA package demands multilayer PCB with controlled-impedance traces; consider thermal vias below the die for continuous high-duty operation. This page synthesizes distributor pricing, lifecycle status, drop-in alternatives from the same PowerQUICC family, and practical design notes not found in the manufacturer datasheet. Pricing and availability reference current date 2026-10-16.

Cotação Contato
MPC885VR66 - 66MHz 32-Bit PowerQUICC MPU | NXP Semiconductors
MPC885VR66

MPC885VR66 - 66MHz 32-Bit PowerQUICC MPU | NXP Semiconductors

The NXP Semiconductors MPC885VR66 is a 66 MHz, single-core, 32-bit PowerQUICC communications microprocessor in a 357-pin plastic BGA package measuring 25 x 25 mm. According to the NXP product page, it operates from 0°C to 95°C and is identified as an end-of-life product. Its 3.3 V supply, 66 MHz clock, and advertised 87 MIPS performance place it in the legacy MPC8xx embedded communications processor family. A microprocessor is a programmable semiconductor system containing a central processing unit, memory interfaces, communications controllers, and associated peripherals. Within the broader semiconductor hierarchy, the MPC885VR66 belongs to the microprocessor and embedded processor category, and more specifically to the PowerQUICC communications-processor family. Such devices combine a general-purpose processing core with hardware designed for telecommunications, networking, and industrial data-transfer applications. Key features verified for the MPC885VR66 include a 32-bit RISC-compatible Power Architecture, one processor core, a 66 MHz operating frequency, 3.3 V operation, and 87 MIPS advertised performance. The device is supplied in a 357-PBGA package. Distributor listings also identify the package as 357-BBGA in some records, reflecting differing package-family terminology, while the DigiKey listing specifies 357-PBGA (25 x 25 mm). Lead-free and RoHS-compliant status are reported by the DigChip product record. The MPC8xx architecture is associated with communications-oriented system design because it combines processing capability with dedicated communication functions. A 66 MHz clock and 87 MIPS throughput provide useful compute performance for embedded networking, control, protocol handling, and legacy industrial equipment. The 357-ball package also exposes a large number of external interfaces, making board-level signal integrity, power distribution, and thermal design especially important. Typical uses include embedded communications controllers, industrial networking equipment, protocol-conversion systems, telecommunications support hardware, and legacy industrial-control platforms. Because the NXP product page labels the MPC885VR66 end of life, engineers should preserve the original part when maintaining an existing design, qualify any authorized supply carefully, and evaluate a redesign before starting a new high-volume platform. A key design consideration is that the 357-BGA footprint is not interchangeable with a smaller package or a different pin arrangement. Any replacement must use the same 357-ball land pattern, confirm electrical compatibility, verify peripheral and memory-interface requirements, and undergo board-level validation. This page consolidates verified distributor lifecycle, package, clock, voltage, and pricing information while clearly identifying unavailable technical data rather than estimating it.

Cotação Contato
MPC885VR80 - 80MHz PowerQUICC MPU | NXP Semiconductors
MPC885VR80

MPC885VR80 - 80MHz PowerQUICC MPU | NXP Semiconductors

The NXP Semiconductors MPC885VR80 is a 32-bit Power Architecture communications processor from the PowerQUICC MPC8xx family, integrating a CPU core with on-chip peripherals for networking and communications applications. The part operates at 80 MHz core frequency, contains an integrated communications processor module (CPM), and is housed in a 357-ball PBGA (25x25 mm) package. It belongs to NXP's PowerQUICC I family that combined a PowerPC core with dedicated serial communications hardware, targeting routers, switches, and industrial control systems. The PowerQUICC MPC8xx family, part of the broader microprocessor (MPU) product hierarchy (microprocessor > microcontroller > integrated circuit), evolved from Motorola's original PowerPC-based embedded processors and was widely adopted in the late 1990s and 2000s. The 'VR' suffix denotes an extended temperature grade variant, and the '80' suffix specifies the maximum CPU core clock of 80 MHz. According to the NXP product page, this device is now discontinued, with formal End-of-Life documentation posted by NXP. Key features include a 32-bit Power Architecture core with 4K instruction cache and 4K data cache, dual Fast Ethernet controllers (10/100 Mbps), an integrated communications processor module with multiple serial channels (HDLC/SDLC, UART, SCC, SMC), USB support, and external memory controllers for SDRAM, SRAM, EPROM, and Flash. The device operates from a maximum supply voltage of 1.9 V core and supports industrial networking protocols. The architecture combines a general-purpose PowerPC core with dedicated CPM hardware that offloads communications tasks, allowing the core to handle application-layer processing. This dual-processor design maximizes throughput for packet processing while keeping the core free for routing table management and protocol stack execution. Per the manufacturer datasheet, on-chip peripherals include 4 serial communication controllers (SCC), 2 serial management controllers (SMC), 1 serial peripheral interface (SPI), 1 I2C interface, and a USB controller. Typical applications include SOHO routers, ADSL modems with integrated router functionality, industrial Ethernet gateways, protocol converters, factory automation controllers, and legacy telecom equipment. The combination of CPM offload and on-chip Ethernet made the MPC885VR80 a popular choice for embedded networking in the late 1990s and early 2000s, when small-office routers transitioned from x86 designs to dedicated network processors. When designing with this device, engineers must consider the large 357-ball PBGA package requires careful PCB layout with multiple ground and power balls for power delivery. The 1.9 V core supply typically requires a separate DC-DC regulator alongside the 3.3 V I/O supply. This page synthesizes distributor pricing, available inventory from authorized and aftermarket sources, and practical design notes not consolidated in the manufacturer datasheet, supporting both ongoing maintenance of legacy designs and end-of-life migration planning.

Cotação Contato
MPC885ZP133 - PowerQUICC 32-Bit 133MHz MPU | NXP | 357-PBGA
MPC885ZP133

MPC885ZP133 - PowerQUICC 32-Bit 133MHz MPU | NXP | 357-PBGA

The NXP MPC885ZP133 is a 32-bit PowerQUICC microprocessor built on Power Architecture technology, operating at up to 133 MHz and housed in a 357-ball PBGA (25 mm × 25 mm) package. Marketed as a communications processor for embedded networking and telecom equipment, it integrates a single MPC8xx core with on-chip peripherals tailored for WAN, LAN, and serial-backplane routing. The PowerQUICC device family sits at the intersection of microprocessors (MPU) and microcontrollers (MCU). A PowerQUICC chip combines a PowerPC-class integer core with dedicated communications-engine peripherals (ATM, HDLC, Ethernet, USB, serial interfaces), eliminating the need for a separate media-access controller. Within the broader taxonomy, it is classified as an embedded MPU under Integrated Circuits, with a sibling hierarchy of communications processors -> networking SoCs -> embedded processors -> semiconductors. Key features include a 32-bit core running at 133 MHz, integrated 10/100 Mbps Fast Ethernet MAC, dual HDLC/ATM supporting channels, USB (full-speed) and multiple serial interfaces, and a 1.9 V core / 3.3 V I/O dual-rail supply scheme. The integrated peripherals offload the CPU from protocol framing tasks, allowing deterministic throughput at line rate. The 357-PBGA plastic-ball-grid-array package exposes a wide parallel external bus for SDRAM and Flash expansions. Typical applications include small-business routers, ISDN terminal adapters, ADSL/Cable modems, industrial serial-to-Ethernet gateways, and networked control systems. Operating temperature range is 0 °C to 95 °C. A design consideration: engineers who need determinism under heavy protocol load should review the reference manual's CPM (Communications Processor Module) section because the offload engine, not the core's MIPS, gates most dataplane work. This page synthesizes datasheet specifications, an analysis of pin-compatible alternatives, and pragmatic design notes not found in NXP's official hardware-specifications document.

Cotação Contato
MPC885ZP66 - 66MHz PowerQUICC MPU 357-PBGA | NXP
MPC885ZP66

MPC885ZP66 - 66MHz PowerQUICC MPU 357-PBGA | NXP

The NXP (formerly Freescale) MPC885ZP66 is a PowerQUICC communications microprocessor integrating a 32-bit Power Architecture core with on-chip peripherals, packaged in a 357-ball PBGA (25x25 mm). It runs at up to 66 MHz, targets networking and telecom equipment, and operates over a 0 to 95 C commercial temperature range. A microprocessor (MPU) is the central processing unit of an embedded system, executing instructions fetched from memory and coordinating system peripherals. The MPC885 sits inside the MPU -> embedded processor -> microcontroller/SoC -> semiconductor taxonomy, and is positioned as a low-power communications SoC with integrated MAC, UART, I2C, SPI, USB, and HDLC/ATM controllers that historically offloaded the CPU in routers, DSLAMs, and PBX systems. Key specifications include a single 32-bit core running at 66 MHz, 4 KB instruction and data caches, integrated Ethernet MACs, a 32-bit PCI bridge, and a memory controller supporting SDRAM, DRAM, SRAM, Flash, and ROM. The 357-PBGA package supplies the high I/O count required for the parallel system bus, two 10/100 MII Ethernet interfaces, USB, and serial channels. Architecturally the device combines the Power Architecture CPU with the CPM (Communications Processor Module), a RISC engine that handles DMA and serial protocols independently of the core, freeing CPU bandwidth for routing and protocol-stack work. Power is typically supplied at 3.3 V I/O with a 1.8 V core rail, and the part supports several low-power modes for energy-conscious designs. Typical uses include industrial routers, ISDN/DSL gateways, two-port 10/100 Ethernet switches, embedded firewalls, PBX control cards, and legacy 32-bit serial-control subsystems. The wide peripheral integration makes it a fit for compact, BOM-conscious designs. When designing in, plan bypass capacitors for both core and I/O rails within 25 mm of the balls, route the 32-bit system bus with impedance control, and allocate adequate thermal copper to keep the junction under the 95 C limit. Refer to the MPC885 Hardware Specifications for power-up sequencing. This page combines NXP datasheet parameters, real distributor availability, drop-in alternatives in the same 357-PBGA footprint, and practical design notes not found in the marketing summary.

Cotação Contato
MPC885ZP80 - PowerQUICC 32-Bit MPU, 80MHz, 357-BGA | NXP
MPC885ZP80

MPC885ZP80 - PowerQUICC 32-Bit MPU, 80MHz, 357-BGA | NXP

The NXP MPC885ZP80 is a PowerQUICC communications processor built on Power Architecture technology, integrating an MPC8xx core at 80 MHz with a 3.3 V supply in a 357-ball PBGA package. It combines a 32-bit RISC core with on-chip integrated peripherals for networking and embedded communications workloads, and is specified for the 0 °C to 95 °C operating range. A PowerQUICC processor is a category of integrated communications processor that pairs a Power Architecture CPU with peripheral subsystems optimized for WAN, LAN, telecom, and industrial control. In the broader taxonomy it sits between a general-purpose microcontroller (MCU) and a high-performance applications processor, filling the niche where deterministic real-time response plus on-chip serial protocols are required without paying the cost and power of an applications SoC. The MPC885 belongs to the PowerQUICC I family, distinguished from PowerQUICC II by its core architecture and peripheral mix. Key features include an 80 MHz 32-bit Power Architecture core, integrated communications processor module (CPM) supporting serial protocols, 3.3 V single-supply operation, 357-ball PBGA package (25 x 25 mm), and the legacy industrial operating range of 0 °C to 95 °C. The CPM offloads DMA, HDLC, and serial-channel handling from the core, freeing the CPU for higher-layer protocol and application logic. Architecturally, the MPC885ZP80 implements separate instruction and data caches, a memory management unit, and the CPM that drives multiple SCCs, SMCs, and an SPI/I2C controller. The 0.18 µm CMOS process and integrated PLL allow the 3.3 V I/O while internally scaling the core. Power dissipation is bounded by the package thermal resistance and the activity of the CPM-driven serial channels. Typical applications include low-end routers, DSL and cable modems, industrial serial protocol bridges, set-top box controllers, and embedded telecom line cards. The 357-PBGA footprint is shared across the MPC885 family, enabling PCB reuse across speed, temperature, and feature variants. Designers value the deterministic CPM interrupt latency for real-time serial traffic. When designing with this part, allocate the full PBGA breakout with at least 4 inner power/ground planes for the 357-ball array, and follow NXP's reference design for power decoupling. The legacy 0-95 °C temperature window means the part is NOT suited for extended-industrial or automotive environments - choose the MPC885CVR80 or a PowerQUICC II derivative for -40 °C to +105 °C applications. This page synthesizes distributor pricing, drop-in alternatives within the 357-PBGA footprint, and practical design notes not found in the manufacturer datasheet.

Cotação Contato
MPCZ565MVR56 - 32-bit Power Arch MCU, 1MB Flash, 40MHz | NXP
MPCZ565MVR56

MPCZ565MVR56 - 32-bit Power Arch MCU, 1MB Flash, 40MHz | NXP

The NXP MPCZ565MVR56 is a 32-bit microcontroller from the MPC500 family built on the Power Architecture instruction set, integrating 1 MB of on-chip flash memory, a floating-point unit, and an advanced automotive-grade peripheral set. It operates at up to 40 MHz, supports -40C to +125C junction temperatures, and is housed in a 388-ball PBGA package. The Z56 device code denotes a specific Flash/SRAM configuration of the MPC565 die. A microcontroller (MCU) is a single-chip computation engine that integrates a CPU core, volatile and non-volatile memory, and programmable peripherals. It sits below the microprocessor (MPU) in the computing hierarchy but above general-purpose logic ICs. Within the Power Architecture family, the MPC500 series targets real-time automotive control where deterministic interrupt latency, on-chip flash, and automotive temperature grades are mandatory. The MPC565 specifically adds a hardware floating-point unit, supporting high-throughput signal processing in powertrain and chassis domains. Key features include 1 MB of embedded Flash, a unified 64 KB SRAM, a floating-point unit compliant with IEEE 754, dual CAN 2.0B controllers, an enhanced modular I/O subsystem, and a 32-channel eMIOS timer for PWM generation. The device also integrates a queued analog-to-digital converter (QADC) with 40 channels and a Time Processing Unit (TPU) for complex timing without CPU intervention. The MPCZ565MVR56 is fabricated in a 0.25-micron CMOS process and includes a JTAG/OnCE debug port, a Background Debug Mode (BDM), and a system integration unit with configurable chip-selects. Its automotive-grade temperature rating and ECC-protected flash make it qualified for engine control units, anti-lock brake systems, and electronic stability control modules where functional safety is critical. Typical applications include engine management ECUs, transmission controllers, body controllers, and industrial motion control. The MPC565's combination of FPU, hardware timers, and automotive qualification makes it suitable for any closed-loop control application requiring 32-bit floating-point math. When designing with this MCU, ensure your code uses the Power Architecture EABI and respects the MPC565 memory map. Decoupling and trace layout are critical at 40 MHz; follow NXP application note AN2543 for EMC layout. Code written for the MPC555 is generally compatible, simplifying migration. This page synthesizes distributor pricing from DigiKey and Rochester Electronics, drop-in alternatives sourced from the NXP MPC500 and PowerPC MPC5xx families, and practical design notes not found in the standalone manufacturer datasheet.

Cotação Contato
MPXD1010VLQ64 - 64MHz 32-bit 1MB MCU | NXP
MPXD1010VLQ64

MPXD1010VLQ64 - 64MHz 32-bit 1MB MCU | NXP

The NXP Semiconductors MPXD1010VLQ64 is a 32-bit e200z0h microcontroller operating at 64 MHz, with 1 MB of flash memory and 48 KB of RAM, housed in a 144-LQFP 20 mm × 20 mm package. It provides 105 I/O pins and is identified as an industrial-temperature-grade component by distributor records. The verified distributor information supports its use in embedded control, industrial equipment, communications, and real-time processing systems. A microcontroller is a semiconductor device that integrates a processor core, program memory, data memory, peripherals, and I/O into one compact component. The MPXD1010VLQ64 belongs to the embedded microcontroller hierarchy and combines deterministic control processing with substantial onboard storage. Its 1 MB flash supports firmware and application code, while 48 KB of RAM supports working data, stack space, and intermediate calculations. The principal verified parameters are a 64 MHz maximum operating frequency, 32-bit architecture, 1 MB program memory, 48 KB RAM, 105 I/O pins, and a 144-LQFP package. The suffix VLQ64 identifies the 64 MHz configuration, while Q64 denotes the 144-pin LQFP package variant. Distributor listings identify the device as an e200z0h PX microcontroller, which is useful for software and peripheral planning when supported by the manufacturer documentation. The 144-LQFP package provides a high pin count for systems requiring multiple external interfaces and control signals. Compared with smaller microcontroller packages, it offers more I/O capacity but requires careful PCB routing and adequate thermal consideration. The 20 mm × 20 mm package is a surface-mount gull-wing format intended for automated assembly and high-density embedded systems. Typical applications include industrial automation controllers, communications equipment, motor and machine control, data acquisition systems, and embedded gateways. The available verified data does not specify individual peripheral functions, supply voltage, memory technology beyond the listed capacities, or detailed timing characteristics; those values should be confirmed in the NXP datasheet before final design release. Designers should verify the exact pinout, power requirements, clock configuration, peripheral multiplexing, and programming requirements from the official NXP documentation. The 105 I/O count is a package-level resource claim, while the usable I/O count may be lower when pins are reserved for power, ground, clock, reset, debug, and other fixed functions. PCB layouts should preserve the manufacturer-recommended decoupling and exposed thermal considerations even when those values are not published in the supplied search data. This product record combines verified distributor specifications, package information, sourcing links, and engineering-oriented selection guidance. It is intended to support initial component identification and comparison while clearly separating verified facts from parameters that still require confirmation from the manufacturer datasheet.

Cotação Contato
MPXD1010VLU64 - 32-Bit 64MHz 1MB Flash MCU | NXP
MPXD1010VLU64

MPXD1010VLU64 - 32-Bit 64MHz 1MB Flash MCU | NXP

The NXP MPXD1010VLU64 is a 32-bit e200z0h Power Architecture microcontroller operating at 64 MHz, with 1 MB of flash memory, 48 KB of RAM, and 133 I/O pins in a 176-LQFP package. It is designed for entry-level display solutions requiring embedded control, connectivity, and real-time peripheral integration. A microcontroller is a programmable system-on-chip that executes firmware, manages digital inputs and outputs, and coordinates memories, communication interfaces, timers, and other peripherals. The e200z0h core places the MPXD1010VLU64 in the 32-bit embedded-controller segment, where deterministic control and communication throughput are more important than the power profile of a low-cost 8-bit device. The verified specifications identify 1 MB (1M x 8) program flash, 48 KB (48K x 8) RAM, a 64 MHz operating frequency, 133 I/O pins, and connectivity including CANbus, I²C, LINbus, SCI, SPI, and UART/USART. The listed peripheral set also includes DMA, LCD, power-on reset, PWM, and a watchdog timer, supporting display controllers, automotive or industrial communications, and general embedded control systems. The package is a 176-LQFP in a 24 mm x 24 mm gull-wing format. Its large pin count exposes substantially more signal and peripheral resources than a small microcontroller package, which is useful for systems combining display interfaces, external memory, communication buses, and control signals. The exact electrical limits, memory map, pin names, and timing values should be confirmed in the manufacturer datasheet before layout or firmware release. Typical applications include entry-level display systems, industrial control panels, communication gateways, CAN-based equipment, and embedded systems requiring multiple serial interfaces. Because lifecycle information is reported as obsolete in one verified source, engineers should verify current sourcing, supported revisions, and any approved migration path before new production designs. A key design consideration is to match the MCU's power, clock, peripheral, and package requirements to the existing PCB. The 176-LQFP footprint has fine-pitch leads and requires careful routing, thermal planning, and assembly inspection; do not substitute a different package without a documented footprint and pinout comparison. This page consolidates the verified distributor specifications, lifecycle warning, package details, and replacement limitations for engineers evaluating the MPXD1010VLU64. Because the available cross-reference results do not verify five genuine same-package pin-to-pin alternatives, this page does not invent drop-in replacements.

Cotação Contato
MPXN2020VMG116 - 116MHz 32-Bit 2MB MCU | NXP | Gateway
MPXN2020VMG116

MPXN2020VMG116 - 116MHz 32-Bit 2MB MCU | NXP | Gateway

The NXP Semiconductors MPXN2020VMG116 is a 32-bit e200z650 Power Architecture microcontroller operating at 116 MHz, with 2 MB of flash memory and a 208-pin MAPBGA package measuring 17 x 17 mm. It is positioned for industrial embedded control applications requiring substantial embedded flash, a high pin count, and integrated gateway-oriented connectivity capabilities. A microcontroller is a programmable system-on-chip that integrates a processor core, nonvolatile program memory, data memory, and peripherals into one component. The e200z650 core places MPXN2020VMG116 in the 32-bit embedded microcontroller hierarchy, where deterministic control and extensive software support are more important than the energy profile of a low-power microcontroller. Its 208-ball package supports dense mixed-signal and communication-oriented board layouts. The verified product data identifies a 116 MHz operating frequency, 2 MB flash organized as 2M x 8, and an industrial temperature grade. One distributor also lists 592 KB of memory, but the supplied data does not explain whether that figure represents RAM, another memory resource, or a device variant. Consequently, the value is reported separately and should be confirmed against the manufacturer documentation before design allocation. MPXN2020VMG116 is suitable for industrial gateways, networked embedded controllers, communications equipment, and compact control platforms that benefit from a 116 MHz embedded processor and 2 MB program-memory footprint. Its large MAPBGA package requires multilayer PCB design, careful escape routing, and assembly-process qualification, making it better suited to sophisticated equipment than simple low-cost prototypes. Engineers should confirm all pin multiplexing, power rails, clock requirements, memory interfaces, and ball assignments from the official NXP datasheet before schematic capture. Because no manufacturer datasheet URL or complete pinout was supplied in the verified data, this page does not infer electrical limits, peripheral assignments, or package-ball functions. Procurement users should also confirm current lifecycle and stock status directly with the manufacturer or an authorized distributor. This page consolidates verified distributor specifications, package data, sourcing information, and practical selection guidance. It separates confirmed facts from unavailable parameters, helping engineers assess the MPXN2020VMG116 for gateway and industrial embedded designs without relying on unverified electrical assumptions.

Cotação Contato
MPXN2120VMG116 - 32-bit 116MHz MCU 2MB Flash | NXP
MPXN2120VMG116

MPXN2120VMG116 - 32-bit 116MHz MCU 2MB Flash | NXP

The NXP Semiconductors MPXN2120VMG116 is a 32-bit e200z650 microcontroller rated at 116 MHz, with 2 MB of flash program memory and 155 I/O in a 208-MAPBGA package measuring 17 mm by 17 mm. It belongs to the NXP PX Series and targets embedded gateway and networking designs requiring integrated communications, real-time control, and substantial onboard program storage. A microcontroller is a programmable semiconductor that integrates a processor core, memory, peripherals, and I/O on one device. Within the embedded-computing hierarchy, this part is a 32-bit MCU, a semiconductor used to execute firmware, acquire inputs, control outputs, and manage communication interfaces. Its e200z650 core provides the processing platform while the PX Series integration reduces the number of external devices required in a gateway controller. The verified product data identifies 2 MB (2M x 8) flash memory, a 116 MHz operating frequency, 155 I/O, and a 208-MAPBGA package. Connectivity listed in the available source data includes CANbus, I²C, LINbus, SCI, SPI, and UART/USART. The listed peripherals include DMA, power-on reset, PWM, and watchdog timer. These interfaces make the device applicable to connected industrial equipment, transport systems, and network-edge controllers where multiple serial buses and deterministic peripheral handling are useful. The MPXN2120VMG116 is reported as obsolete by one data result, although distributor listings also identify NXP and Rochester Electronics inventory records. Lifecycle and sourcing should therefore be confirmed for the exact production quantity. The 208-ball package also demands careful PCB layout and assembly planning because its fine routing density increases assembly complexity compared with leaded or lower-ball-count packages. For new designs, engineers should evaluate current NXP product options rather than assuming an obsolete gateway MCU is suitable for a long production run. When maintaining an existing MPXN2120VMG116 design, validate the exact package, pin mapping, power architecture, clock configuration, memory map, and firmware against the relevant NXP documentation before assembly or repair. This page consolidates the verified distributor specifications, lifecycle information, package details, interface list, sourcing links, and design considerations for this obsolete PX Series microcontroller. It does not infer undocumented electrical ratings, pin names, or replacement parts.

Cotação Contato
MPXR4040VVU264 - 264MHz 32-bit MCU with 4MB Flash | NXP
MPXR4040VVU264

MPXR4040VVU264 - 264MHz 32-bit MCU with 4MB Flash | NXP

The NXP Semiconductors MPXR4040VVU264 is a 32-bit Power Architecture e200z7 microcontroller rated at 264 MHz, with 4 MB of flash program memory and 416-ball PBGA packaging. The verified product listing identifies 198 I/O, CANbus, LINbus, SCI, SPI, UART/USART, DMA, PWM, and watchdog connectivity. Its industrial temperature-grade marking and 27 x 27 mm package position it for real-time embedded control systems requiring high processing performance and extensive peripheral integration. A microcontroller is a programmable system-on-chip that combines a processor core, memory, communication peripherals, timers, and I/O in one device. The MPXR4040VVU264 belongs to the PX Series and uses a 32-bit e200z7 core built around Power Architecture technology. This places it in the embedded-controller hierarchy: MCU -> real-time processor -> embedded semiconductor. Its combination of local flash, serial interfaces, and real-time peripherals supports industrial networking, machine control, automotive-style communications, and test equipment without requiring a separate external processor. The verified data confirms a 264 MHz operating speed, 4 MB (4M x 8) flash, 32-bit processing, 198 I/O, and a 416-terminal square BGA package. The available connectivity includes CANbus, EBI/EMI, LINbus, SCI, SPI, UART/USART, DMA, POR, PWM, and WDT. These interfaces allow the device to coordinate networked nodes, external memories, actuator controls, and real-time data paths. The 198 available I/O provide substantial board-level integration for sensors, communication transceivers, power-control signals, and industrial logic. The e200z7 architecture and 264 MHz class position the part in performance-oriented real-time embedded designs rather than low-cost basic control. Flash memory supports local firmware storage, while DMA can reduce processor involvement in data transfers. PWM and watchdog resources support periodic actuator drive and system monitoring, and the communication peripherals cover common industrial and embedded control buses. The supplied data does not specify RAM capacity beyond a conflicting distributor snippet, operating voltage, memory-map details, or electrical timing limits. Typical applications include industrial automation controllers, CAN and LIN network nodes, motor and power-control systems, communications equipment, and embedded test or measurement platforms. Designers should prioritize the 416-ball PBGA layout and verify the exact pin-level requirements, power rails, clock configuration, and board-level escape routing before layout begins. Because the package uses 416 balls rather than a leaded package, a multilayer PCB and appropriate assembly process are normally required. The MPXR4040VVU264 is listed as obsolete by one datasheet source, so procurement should confirm lifecycle and counterfeit risk before committing to new production. LCSC shows a price from $1.0048 in the verified search result, while Heisener reports inventory but requests a quotation. These figures are commercial snapshots, not guaranteed XAIPART inventory or a universal replacement price. This page consolidates verified distributor specifications, interface details, lifecycle signals, sourcing context, and engineering caveats. It is intended to help engineers distinguish the obsolete controller from possible alternatives, assess compatibility, and plan a controlled redesign rather than assuming that any cross-reference is automatically pin-to-pin equivalent.

Cotação Contato
MPXS2005VLQ80 - 32-bit 80MHz 512KB Flash MCU | NXP
MPXS2005VLQ80

MPXS2005VLQ80 - 32-bit 80MHz 512KB Flash MCU | NXP

The NXP Semiconductors MPXS2005VLQ80 is a 32-bit e200z4d Power Architecture microcontroller operating at 80 MHz, with 512 KB of flash memory in a 144-LQFP 20 x 20 mm package. The device supports 3.3 V and 5 V operation and is identified in the retrieved distributor data as an automotive-temperature-grade component. Its combination of a 32-bit core, 512 KB program memory, and a high-pin-count gull-wing package makes it suitable for embedded control, automotive electronics, industrial equipment, and communication-oriented systems. A microcontroller is a programmable semiconductor that integrates a processor core, memory, peripherals, and interface circuitry into one device. The MPXS2005VLQ80 belongs to the e200 family and uses the e200z4d core designation shown in the distributor records. The 80 MHz operating frequency provides the timing basis for control loops, protocol handling, and supervisory tasks, while the 512 KB flash capacity supports embedded application code and firmware. The available specification set confirms an e200z4d PX microcontroller, 32-bit architecture, 80 MHz operation, 512 KB organized as 512K x 8 flash, and a 144-LQFP package measuring 20 x 20 mm. The retrieved listings also identify the component as supporting 3.3 V and 5 V operation and as an automotive-temperature-grade device. Detailed electrical limits, peripheral inventories, memory maps, and timing characteristics were not included in the supplied evidence and therefore remain unstated here. The 144-pin LQFP footprint provides a substantial number of external connections for digital I/O and controller peripherals. LQFP, or Low-profile Quad Flat Package, is a surface-mount package family with gull-wing leads on all four sides. The package is larger than many compact embedded packages, but it provides a practical combination of pin access and board-space efficiency for designs requiring numerous external signals. Typical design uses include automotive body or chassis control modules, industrial automation controllers, communication gateways, sensor aggregation units, and embedded motor-control systems. The supplied evidence specifically supports automotive-temperature classification, while the broader application examples are application-fit descriptions rather than claims of manufacturer-listed designs. Designers should verify the complete electrical, timing, peripheral, and pin-level requirements against the official datasheet before schematic capture or PCB release. Because the verified data does not provide a manufacturer PDF URL, a complete pinout, maximum supply voltage, current consumption, or thermal limits, those items must not be inferred from the distributor summaries.

Cotação Contato
MPXS2010VLQ120 - 120MHz e200z4 MCU, 1MB Flash | NXP
MPXS2010VLQ120

MPXS2010VLQ120 - 120MHz e200z4 MCU, 1MB Flash | NXP

The NXP Semiconductors MPXS2010VLQ120 is a 32-bit e200z4 core microcontroller operating at 120 MHz, with 1 MB of flash memory organized as 1M x 8 bits, in a 144-LQFP 20 x 20 mm package. It belongs to the PXS20 microcontroller family and is positioned for automotive and industrial embedded systems requiring deterministic real-time control, substantial on-chip flash, and a high pin count for external interfaces. A microcontroller is a programmable integrated circuit containing a processor core, memory, peripherals, and interface logic. The e200z4 core combines instruction execution, interrupt control, and deterministic peripheral access within a single embedded device. The MPXS2010VLQ120 therefore functions as a semiconductor, specifically a 32-bit microcontroller within the broader embedded-control and industrial-automation hierarchy. The verified product data identifies a 120 MHz operating frequency, 1 MB flash configuration, e200z4 architecture, and 144-LQFP package. The high pin count provides more external connection options than a small leadless MCU, although the exact peripheral allocation and electrical limits require the manufacturer datasheet. The 20 x 20 mm gull-wing package is suitable for conventional surface-mount assembly and provides accessible leads for inspection and rework. Typical design uses include automotive body and chassis electronics, industrial controllers, motor-control platforms, communication equipment, and embedded gateways. The 120 MHz core supports computationally intensive control software, while 1 MB flash provides room for application code and configuration data. Designers should still verify memory-map compatibility, peripheral assignments, electrical ratings, and software migration requirements before selecting a substitute. For a robust design, follow the manufacturer reference manual and datasheet for clock, memory, pin-multiplexing, reset, and power-supply requirements. Validate the 3.3 V and 5 V references found in a distributor source against the exact device datasheet, since the supplied search data does not provide complete operating details or an official NXP datasheet URL. This page consolidates the verified distributor specifications, package information, sourcing references, and engineering limitations for MPXS2010VLQ120. It does not invent missing electrical specifications, and it separates confirmed facts from parameters requiring datasheet confirmation.

Cotação Contato
MPXS2010VLQ80 - 32-Bit 80MHz 1MB MCU | NXP | Automotive
MPXS2010VLQ80

MPXS2010VLQ80 - 32-Bit 80MHz 1MB MCU | NXP | Automotive

The NXP Semiconductors MPXS2010VLQ80 is a 32-bit e200z4d Power Architecture microcontroller operating at 80 MHz, with 1 MB of flash memory and a 144-LQFP 20 x 20 mm package. The verified distributor data identifies the device as an automotive-temperature-grade MCU and describes a 3.3 V / 5 V operating class. It is suited to embedded automotive control, body electronics, actuator control, instrumentation, and communication-oriented systems where a 32-bit processor, local flash storage, and a high-pin-count package are required. What is a 32-bit microcontroller? A microcontroller is a semiconductor device integrating a processor core, program memory, data memory, peripherals, and interface logic on one integrated circuit. The e200z4d core belongs to the Power Architecture family and provides the computational base for real-time embedded control. In the broader hierarchy, MPXS2010VLQ80 is a microcontroller, embedded processor, semiconductor, and programmable control component. Its 1 MB flash capacity provides room for application code and configuration data, while the 80 MHz clock supports time-dependent control and communication tasks. The supplied data specifically identifies a 32-bit e200z4d core, 80 MHz operation, 1 MB flash organized as 1M x 8, 144 LQFP construction, and automotive temperature grade. The package is described as gull-wing, square, and 20 x 20 mm. These features make the MPN appropriate for larger control modules that need numerous external connections and a conventional fine-pitch surface-mount package. The available verified data does not state RAM size, peripheral inventory, supply-voltage limits, flash endurance, or detailed pin assignments; those values must be confirmed from the official manufacturer documentation before a new design is released. Typical automotive uses include motor and solenoid control, central body modules, sensor aggregation, actuator interfaces, power-window or seat systems, lighting control, and gateway or communications modules. The 144-pin LQFP gives the design access to many external signals compared with a small leadless package, making it convenient for systems requiring several sensors, drivers, communication lines, and discrete control outputs. The 3.3 V / 5 V designation also makes it relevant to mixed-voltage automotive electronics, but the exact rail tolerances and I/O levels require confirmation. For PCB implementation, use the exact NXP datasheet package drawing and pinout rather than relying on generic LQFP assumptions. Confirm exposed-pad or thermal requirements, recommended decoupling, oscillator connections, reset behavior, programming interface, and unused-pin treatment. The 1 MB flash and 80 MHz rating should not be treated as a complete performance guarantee because peripheral clocks and memory-wait behavior require the missing technical data. This product page combines verified distributor specifications, package information, lifecycle-relevant sourcing context, and engineering selection guidance. It intentionally identifies unavailable parameters instead of estimating them, helping engineers distinguish confirmed facts from information that still needs manufacturer-datasheet confirmation.

Cotação Contato
MPXS2010VMM80 - 80MHz 1MB 32-Bit MCU | NXP
MPXS2010VMM80

MPXS2010VMM80 - 80MHz 1MB 32-Bit MCU | NXP

NXP Semiconductors MPXS2010VMM80 is a 32-bit e200z4d PX-series microcontroller operating at 80 MHz, with 1 MB (1M x 8) flash memory, in a 257-LFBGA package measuring 14 x 14 mm. The verified distributor information identifies this device as a PXS20-family MCU and lists the package as MAPBGA-257 or 257-LFBGA. A microcontroller is a programmable integrated circuit containing a processor core, memory, peripherals, and interface logic. The PXS20 family belongs to the embedded-processing hierarchy of 32-bit MCU, embedded controller, real-time control, and industrial automation semiconductor devices. This MPXS2010VMM80 combines an e200 RISC architecture with flash-backed program storage for embedded control, communications, and safety-oriented industrial systems. The principal verified specifications are a 32-bit processing architecture, 80 MHz operating frequency, and 1 MB (1M x 8) flash memory. Distributor records also identify an automotive temperature grade, although the exact numeric operating-temperature limits and qualification status are not supplied in the verified data. The 257-ball package exposes the device's extensive external memory, communication, control, debug, and power connections. Typical automotive and industrial uses include powertrain-related control, electronic control units, body and chassis electronics, real-time communications, and safety subsystems. The 80 MHz processing rate supports deterministic embedded workloads, while the 1 MB flash capacity provides room for application code and configuration data. The PXS20 documentation references the PXS20 Microcontroller Reference Manual for functional characteristics and a Safety Application Guide for fail-safe system implementation under IEC 61508. The large BGA package makes PCB layout and thermal design more demanding than a leaded package. Designers should follow the manufacturer's pin assignment, escape-routing, decoupling, and soldering guidance, verify the exposed thermal and supply connections, and complete signal-integrity and power-integrity reviews before release. This page combines the verified distributor identity, package, frequency, memory, pricing, and availability information with application guidance and explicit sourcing boundaries. Missing electrical, pin-level, lifecycle, and qualification values remain marked for verification rather than being inferred from related PXS20 devices.

Cotação Contato
MPXS3010VMM150 - PXS30 Dual-Core 150MHz MCU, 1MB Flash, 257-LFBGA | NXP
MPXS3010VMM150

MPXS3010VMM150 - PXS30 Dual-Core 150MHz MCU, 1MB Flash, 257-LFBGA | NXP

The NXP MPXS3010VMM150 is a 32-bit dual-core automotive microcontroller based on the e200z7d Power Architecture cores, operating at up to 150 MHz and packaged in a 257-ball LFBGA (14x14 mm). It integrates 1 MB of embedded flash and 256 KB of SRAM, targeting chassis, body, and safety microcontrollers in next-generation vehicle electrical architectures. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (SRAM), and a rich set of peripherals including timers, ADCs, communication controllers, and GPIO. Within the broader semiconductor hierarchy, an MCU is a sub-category of microprocessors and embedded processors, itself a category of integrated circuits (ICs). The PXS30 family sits inside NXP's chassis and safety MCU portfolio, designed to deliver deterministic real-time performance for ASIL-rated applications. Key features of the MPXS3010VMM150 include dual e200z7d cores running up to 150 MHz, 1 MB of on-chip flash for application code, 256 KB of SRAM for data and stack operations, and an integrated peripheral set targeted at automotive networks (CAN, LIN, FlexRay) and motor-control PWM. The 257-LFBGA package provides a compact 14x14 mm footprint while exposing the full set of address, data, and peripheral pins required for high-throughput signal processing. Technically, the PXS30 architecture leverages a superscalar e200z7d core with branch prediction and DSP extensions, supporting single-precision floating point and signal-processing instructions required for sensor fusion and control loops. The on-chip flash controller and ECC-protected SRAM improve functional safety, while the multi-channel timer and ADC subsystem allows direct interface with resolver, encoder, and current-sensing front ends. Typical applications include automotive chassis control, electric power steering, electronic stability control, airbag systems, and other ASIL-rated safety microcontrollers. The combination of dual-core lockstep capability, large flash, and automotive-qualified peripherals makes it well suited to chassis domain controllers and integrated vehicle dynamics modules. When designing with this part, allocate sufficient PCB area for the 14x14 mm BGA and follow NXP's recommended reflow and decoupling guidelines for fine-pitch BGAs, including microvia stack-ups and matched-length impedance routing for high-speed signals. Plan for boot, debug, and JTAG access during layout to avoid respins. This page synthesizes distributor pricing from DigiKey and Mouser, drop-in alternative MCUs from the same PXS30 family, and practical design notes not collected on any single manufacturer or distributor page.

Cotação Contato
MPXS3015VMS180 - 180MHz Dual-Core MCU, 1.5MB Flash | NXP
MPXS3015VMS180

MPXS3015VMS180 - 180MHz Dual-Core MCU, 1.5MB Flash | NXP

NXP Semiconductors MPXS3015VMS180 is a 32-bit dual-core e200z7d PX microcontroller operating at 180 MHz, with 1.5 MB of 8-bit program flash and 384 Kbytes of RAM, supplied in a 473-terminal 19 mm square MAPBGA package. The verified distributor listing also identifies it as automotive-temperature-grade hardware. These headline values place it in the high-performance embedded processor category rather than the basic 8-bit or low-cost 32-bit MCU class. A microcontroller is a semiconductor system containing a processor core, nonvolatile program memory, RAM, peripherals, and interface logic on one integrated device. The MPXS3015VMS180 belongs to the hierarchy MCU, embedded processor, 32-bit microcontroller, and integrated circuit. Its dual e200z7d cores and substantial memory make it suitable for systems that need concurrent control tasks and embedded software rather than only basic input/output sequencing. The verified data confirms 32-bit processing, two cores, a 180 MHz operating speed, and 1.5 MB of flash. A separate verified specification source identifies RAM as 384 Kbytes by 8 bits. The 473-MAPBGA package has a 19 mm by 19 mm body and uses balls rather than wire leads. Partstack further classifies the terminal form as BALL and the package code as LFBGA, while its temperature-grade classification is automotive. This combination of dual-core compute and 1.5 MB program memory can support automotive-oriented embedded controllers, industrial equipment, networking appliances, and other multi-task systems where software organization benefits from parallel instruction streams. The available data does not identify individual communication interfaces, analog functions, supply limits, security features, or pin multiplexing, so those capabilities must be checked in the manufacturer documentation before design release. Thermal and layout planning are critical because a 473-ball BGA concentrates many connections in a 19 mm by 19 mm footprint. Board assembly, ball pitch, escape routing, exposed-pad treatment, and the manufacturer’s recommended land pattern must be verified from the datasheet. A numerically complete 473-pin assignment cannot be reproduced from the supplied snippets without risking incorrect ball mapping. For new designs, engineers should obtain the official Freescale or NXP documentation, confirm the exact pinout and electrical limits, validate software-tool support for the e200z7d architecture, and run lifecycle and supply checks before committing to production. Distributor availability does not by itself establish manufacturer lifecycle status or guaranteed stock. This page combines the verified distributor specifications, pricing evidence, package information, sourcing links, and engineering cautions in one place. It also distinguishes confirmed facts from unavailable parameters and avoids presenting unverified pin assignments or substitute parts as drop-in replacements.

Cotação Contato
MPXS3020VMS180 - 180MHz Dual-Core e200z7d MCU 473-MAPBGA | NXP
MPXS3020VMS180

MPXS3020VMS180 - 180MHz Dual-Core e200z7d MCU 473-MAPBGA | NXP

The NXP MPXS3020VMS180 is a 32-bit dual-core automotive microcontroller from the PXS30 family, integrating two e200z7d cores running up to 180 MHz with 2 MB of on-chip Flash and 512 KB SRAM, housed in a 473-MAPBGA (19x19) package. Headline parameters are 180 MHz dual-core operation, 2 MB Flash, 512 KB SRAM, and a 473-ball MAPBGA package measuring 19 mm x 19 mm. The MPXS3020VMS180 is positioned as a high-performance variant in the PXS30 family; speed grades available include 150 MHz and 180 MHz variants sharing identical pinout. A microcontroller (MCU) is an integrated circuit that combines a CPU core, memory (Flash for program code, SRAM for runtime data), and a rich set of on-chip peripherals (timers, communication controllers, ADCs, GPIO) on a single die. The PXS30 family belongs to the broader power-architecture microcontroller taxonomy: e200z7d core -> Power Architecture MCU -> 32-bit automotive microcontroller -> embedded processing IC. The dual-core architecture provides asymmetric lockstep support for safety-critical applications where one core executes code while the second verifies operation in lockstep, enabling ISO 26262 ASIL-D capable systems when paired with the correct safety libraries. Key features include hardware security module (HSE) support for secure boot and cryptographic acceleration, dual e200z7d cores with FPU, a FlexRay communication controller for automotive networking, multi-channel CAN-FD interfaces, two Ethernet controllers (FEC), a 12-bit ADC with up to 48 channels, and a memory protection unit. The 473-MAPBGA package exposes the full peripheral set and supports external bus interfaces for SRAM, NOR Flash, and SDRAM expansion. The PXS30 architecture uses a superscalar e200z7d core with dual-issue capability and a single-precision FPU, achieving high Dhrystone MIPS performance per MHz. Dual cores can operate in either dual-core parallel mode for performance or lockstep mode for safety, with the chip's Error Correction Code (ECC) on Flash and SRAM enabling reliable operation in harsh automotive environments. The integrated crossbar switch provides simultaneous access to Flash, SRAM, and peripherals from both cores without contention. Typical applications include automotive electronic control units (ECUs), advanced driver assistance systems (ADAS) sensor fusion, chassis domain controllers, electric vehicle (EV) battery management systems (BMS), and industrial functional-safety controllers. The FlexRay and CAN-FD peripherals make the device particularly well-suited to chassis and powertrain networks, while the Ethernet MACs support modern zonal architectures. Design consideration: The 473-MAPBGA package requires at least a 4-layer PCB with microvia technology and a 0.8 mm ball pitch footprint; a thermal management strategy with multiple vias under the exposed pad is required to keep junction temperature within the automotive Grade 1 / Grade 2 limits. Power sequencing must follow the NXP reference manual to avoid internal block corruption during cold-boot. This page synthesizes distributor pricing, same-family and cross-family NXP drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

Cotação Contato
MSC7116VM1000 - 266MHz Fixed-Point DSP, 400-MAPBGA | NXP
MSC7116VM1000

MSC7116VM1000 - 266MHz Fixed-Point DSP, 400-MAPBGA | NXP

The NXP Semiconductors MSC7116VM1000 is a fixed-point Digital Signal Processor (DSP) in the StarCore SC1400 family, delivering 266 MHz core clock and 266 MIPS performance in a 400-pin MAP-BGA (17x17 mm) package. It integrates a single SC1400 DSP core, 192 Kbyte internal SRAM M1 memory, a 16-way 16 Kbyte instruction cache (ICache), and a four-entry write buffer. A DSP (Digital Signal Processor) is a specialized microprocessor optimized for numerical kernels such as FIR/IIR filters, FFTs, codecs, and modem baseband processing. The StarCore SC1400 architecture belongs to the broader hierarchy: fixed-point DSP -> DSP -> microprocessor -> SoC -> semiconductor. It targets deterministic, real-time signal pipelines where C compiler throughput and zero-overhead looping are critical. Key features of the MSC7116VM1000 include 400 Kbyte on-chip RAM, an 8 Kbyte ROM, an I/O voltage of 3.30 V, and a maximum core supply of 1.14 V. The device exposes a Host Interface, I2C, and UART for system integration. The 400-MAPBGA package supports high-speed parallel memory buses and the dedicated StarCore peripheral set required by telecom, audio, and industrial signal-processing designs. The architecture combines a dual-ALU SC1400 core with tightly-coupled SRAM, giving deterministic interrupt latency and predictable code execution. Compared with general-purpose microcontrollers, the SC1400 sustains 266 MIPS at low MHz, making the part attractive for cost-sensitive multi-channel audio, VoIP, and motor-control loops. Typical applications include VoIP gateways, multi-channel audio processing, industrial motor control, software-defined radio baseband, and embedded imaging pre-processing. Designers often pair the MSC7116VM1000 with external SDRAM, an Ethernet PHY, and a host microcontroller or PowerQUICC companion. When designing, ensure proper decoupling on both the 3.3 V I/O and 1.14 V core rails, and follow the MAP-BGA PCB layout guidelines for the 17x17 mm land pattern. Use a JTAG emulator that supports the StarCore SC1400 for code bring-up, and place the external memory as close as possible to the data bus pins. This page synthesizes distributor pricing from DigiKey and Octopart, drop-in alternatives from the same MSC711x family, and practical layout notes not found in the manufacturer datasheet.

Cotação Contato