MPXS2010VLQ120 - 120MHz e200z4 MCU, 1MB Flash | NXP
N.º da peça: MPXS2010VLQ120 ✗ Fim de vida| Qtd. | Preço unitário | Total |
|---|---|---|
| 1 | $14.9996 | $15,00 |
| 10 | $14.9996 | $150,00 |
| 100 | $14.9996 | $1.499,96 |
| 500 | $14.9996 | $7.499,80 |
| 1.000 | $14.9996 | $14.999,60 |
MPXS2010VLQ120 Visão geral
A microcontroller is a programmable integrated circuit containing a processor core, memory, peripherals, and interface logic. The e200z4 core combines instruction execution, interrupt control, and deterministic peripheral access within a single embedded device. The MPXS2010VLQ120 therefore functions as a semiconductor, specifically a 32-bit microcontroller within the broader embedded-control and industrial-automation hierarchy.
The verified product data identifies a 120 MHz operating frequency, 1 MB flash configuration, e200z4 architecture, and 144-LQFP package. The high pin count provides more external connection options than a small leadless MCU, although the exact peripheral allocation and electrical limits require the manufacturer datasheet. The 20 x 20 mm gull-wing package is suitable for conventional surface-mount assembly and provides accessible leads for inspection and rework.
Typical design uses include automotive body and chassis electronics, industrial controllers, motor-control platforms, communication equipment, and embedded gateways. The 120 MHz core supports computationally intensive control software, while 1 MB flash provides room for application code and configuration data. Designers should still verify memory-map compatibility, peripheral assignments, electrical ratings, and software migration requirements before selecting a substitute.
For a robust design, follow the manufacturer reference manual and datasheet for clock, memory, pin-multiplexing, reset, and power-supply requirements. Validate the 3.3 V and 5 V references found in a distributor source against the exact device datasheet, since the supplied search data does not provide complete operating details or an official NXP datasheet URL.
This page consolidates the verified distributor specifications, package information, sourcing references, and engineering limitations for MPXS2010VLQ120. It does not invent missing electrical specifications, and it separates confirmed facts from parameters requiring datasheet confirmation.
Alternativas drop-in para MPXS2010VLQ120 — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Ferramenta de comparação rápida — selecione peças alternativas para comparação lado a lado:
Nenhuma alternativa drop-in disponível para este produto.
Solicitar alternativasMPXS2010VLQ120 Classificações máximas e características elétricas
| Product Type | 32-bit microcontroller IC |
| Processor Core | e200z4 |
| Architecture | e200 RISC |
| Operating Frequency | 120 MHz |
| Flash Memory | 1 MB (1M x 8 bits) |
| Word Organization | 32-bit |
| Encapsulamento | 144-LQFP (20 x 20 mm) |
| Terminal Count | 144 terminals |
| Terminal Form | Gull wing |
| Temperature Grade | Automotive |
| Supply Reference | 3.3 V / 5 V |
| Flash Arrangement | 1M x 8 |
| Series | PXS20 |
| Tipo de montagem | Surface mount |
| Package Code | LFQFP |
| Package Shape | Square |
| Datasheet Page Count | 119 pages |
| Datasheet File Size | 667 KB |
| Manufacturer Document Source | Freescale Semiconductor, Inc. PXS20 Microcontroller datasheet |
Guia de Configuração de Pinos do MPXS2010VLQ120 square
Configuração de pinos para MPXS2010VLQ120 (pacote square). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.
Nenhum dado detalhado de pinagem disponível para MPXS2010VLQ120.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
MPXS2010VLQ120 é adequado para 6 aplicaçãos: Automotive Body Control, Industrial Motor Controller, Embedded Communication Gateway, Industrial Data Acquisition, Chassis and Vehicle Network Node, Industrial HMI Control Platform.
Automotive Body Control
The MPXS2010VLQ120 fits an automotive body-control concept because the verified record identifies an automotive temperature grade, a 120 MHz 32-bit e200z4 core, 1 MB flash, and a 144-LQFP package. The processor can run control logic for body modules, while the high pin count offers more external connection options than a low-pin MCU. The design should use the exact PXS20 pin assignment and electrical data because the supplied search results do not identify individual GPIO, communication, or timing functions. Automotive qualification, operating-temperature limits, and safety requirements must be confirmed separately before production use.
Recomendado
Industrial Motor Controller
The 120 MHz e200z4 processor and 1 MB flash make MPXS2010VLQ120 a plausible controller for industrial motor-control equipment, including actuator hubs, drive modules, and factory automation nodes. Its 144-LQFP package provides a substantial external lead count for control signals, communications, and power-management interfaces, although exact functions must be read from the datasheet. Firmware can place control loops, state machines, diagnostics, and communication services in the confirmed 1 MB flash. Validate timing, PWM resources, analog interfaces, thermal conditions, and industrial qualification before selecting it for a new design.
Recomendado
Embedded Communication Gateway
MPXS2010VLQ120 can serve as the central processor in an embedded gateway when a design needs more flash and package connectivity than a small low-end MCU. The e200z4 core operates at 120 MHz, and the confirmed 1 MB flash provides space for protocol stacks, configuration storage, diagnostics, and application firmware. A 144-LQFP package is practical when the board requires numerous external signals or a mix of legacy and communications interfaces. The available data does not confirm Ethernet, CAN, serial, or USB resources, so those capabilities must be verified directly from the PXS20 documentation before architecture selection.
Recomendado
Industrial Data Acquisition
The MPXS2010VLQ120 is suitable for a data-acquisition controller when the application requires deterministic embedded processing, substantial firmware storage, and a high pin count. The 120 MHz e200z4 processor can execute sampling logic, filtering, calibration, local storage, and communications tasks, while the 1 MB flash provides room for application code. Its LQFP leads are also useful when a product requires accessible external connections and conventional assembly. The verified sources do not specify ADC resolution, timers, communication blocks, or analog voltage limits, so these functions and their acquisition accuracy must be confirmed before schematic design.
Recomendado
Chassis and Vehicle Network Node
The MPXS2010VLQ120 can be evaluated for a vehicle network node because the verified record identifies an automotive temperature grade and a 120 MHz 32-bit architecture. The 144-LQFP package provides many external pins for a network transceiver, sensors, diagnostics, and power-management components. The e200z4 core can support protocol processing, message routing, diagnostic routines, and redundant monitoring code within its 1 MB flash. However, the supplied sources do not identify CAN or other network transceivers, electrical levels, protection requirements, or automotive qualification details; those items must be verified from the exact PXS20 hardware documentation.
Recomendado
Industrial HMI Control Platform
MPXS2010VLQ120 is appropriate for an embedded human-machine-interface controller when the product needs local control logic, event handling, and moderate firmware capacity. The 120 MHz core can manage display and input service routines, while the 1 MB flash can hold application code, calibration data, and interface configuration. The 144-LQFP package offers many pins for display drivers, buttons, communication transceivers, and status indicators. The verified data does not confirm display peripherals, GPIO mapping, memory interfaces, or operating-temperature limits, so the MCU selection must be completed against the PXS20 reference manual and the intended HMI electrical requirements.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para MPXS2010VLQ120 — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto |
|---|---|
| Brand | NXP Semiconductors |
| Package | 144-LQFP (20 x 20 mm) |
| Processor Core | e200z4 |
| Operating Frequency | 120 MHz |
| Flash Memory | 1 MB (1M x 8 bits) |
| Word Size | 32-bit |
| Temperature Grade | Automotive |
| Verified Unit Price | $14.9996 as of 2026-10-20 |
| Terminal Form | Gull wing |
| Series | PXS20 |
Principais diferenciais
- Confirmed 120 MHz e200z4 processing performance (vs No confirmed drop-in alternative)
- 1 MB flash memory for embedded application code (vs No confirmed drop-in alternative)
- High-pin-count 144-LQFP package (vs No confirmed drop-in alternative)
- Automotive temperature-grade identification (vs No confirmed drop-in alternative)
Notas de projeto
Use the 144-LQFP footprint and follow the manufacturer land pattern, solder-mask, paste, and thermal-pad guidance from the PXS20 documentation. The verified data confirms a 20 x 20 mm gull-wing package but does not provide the land dimensions. Do not infer the footprint from the package name alone; verify pin pitch, pin numbering, courtyard clearance, and assembly tolerances before releasing PCB artwork.
Confirm the exact supply-voltage and I/O thresholds from the manufacturer datasheet before connecting external signals. A distributor result references 3.3 V and 5 V operation, but the supplied data does not establish minimum, maximum, or absolute-maximum ratings. Include the required decoupling, power-sequence limits, reset requirements, and external interface protection only after those values are verified.
Do not select a substitute based only on 120 MHz frequency, 1 MB flash, and a 144-LQFP package. Microcontroller compatibility also depends on the e200z4 instruction set, memory map, peripheral arrangement, interrupt vectors, pin multiplexing, clocking, bootloader, and software toolchain. The alternatives search produced no confirmed drop-in replacement, so use an engineering cross-reference and board-level validation before changing the MPN.
Keep high-speed and sensitive signals away from noisy power-conversion regions, while preserving the exact pin multiplexing required by the firmware. Because the supplied data does not specify which pins carry communication, timing, analog, or debug functions, assign nets from the authoritative pin table rather than the distributor title. Validate signal integrity, clock routing, reset behavior, and decoupling with the final schematic and stack-up.
Informações de conformidade
The supplied sources identify an automotive temperature grade but do not provide RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations. Compliance status must be verified from the manufacturer or current distributor documentation.
