INA128PA vs INA2126PA Comparação
Comparação detalhada lado a lado de INA128PA por Texas Instruments e INA2126PA por Texas Instruments. Compare especificações principais, parâmetros elétricos, encapsulamento, status do ciclo de vida, preços e disponibilidade para determinar o melhor componente para os requisitos do seu projeto.
Texas Instruments
INA2126PA - Dual 36V Micropower Instrumentation Amplifier | Texas Instruments
INA2126PA ✓ AtivoComparação de especificações
| Parâmetro | INA128PA | INA2126PA |
|---|---|---|
| Marca | Texas Instruments | Texas Instruments |
| Categoria | Amplifier ICs | Amplifier ICs |
| Status do ciclo de vida | Ativo | Ativo |
| Product Type | Precision instrumentation amplifier | Dual precision instrumentation amplifier |
| Architecture | Three-op-amp instrumentation amplifier | Two-op-amp instrumentation amplifier |
| Number of Circuits | 1 circuit | — |
| Encapsulamento | 8-pin PDIP | 16-pin PDIP |
| Common-Mode Rejection Ratio | 130 dB | — |
| Minimum Common-Mode Rejection | 120 dB | — |
| Corrente de repouso | 700 µA | 175 μA per channel |
| Maximum Input Offset Voltage | 50 µV | — |
| Maximum Input Voltage Drift | 0.5 µV/°C | — |
| Maximum Input Bias Current | 5 nA | — |
| Input Protection | ±40 V | — |
| Supply Range | Up to ±18 V | — |
| Gain Range | 1 to 10,000 | — |
| Gain Setting | Single external resistor | — |
| Bandwidth at Gain 100 | 200 kHz | — |
| Green Product | Yes | — |
| Restricted Substances | No Sb/Br | — |
| Temperatura de operação | -40°C to +85°C | — |
| Tipo de montagem | Through-hole | Through-hole |
| Number of Channels | — | 2 channels |
| Supply Voltage Range | — | ±1.35 V to ±18 V |
| Maximum Supply Voltage | — | 36 V |
| Offset Voltage | — | 250 μV |
| Gain-Bandwidth Product | — | 200 kHz |
| Input Type | — | Differential input |
| Package Type | — | Through-hole PDIP |
| Application Category | — | Precision differential-signal acquisition |
| Portable Operation | — | Supported by low quiescent current |
| Status RoHS | — | [DATA_NEEDED: RoHS status] |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |
| Faixa de temperatura de operação | — | [DATA_NEEDED: operating temperature range] |
| Gain Set Resistance | — | [DATA_NEEDED: gain-set resistor requirements] |