INA128PA vs INA2126PA So sánh
So sánh chi tiết song song của INA128PA bằng Texas Instruments và INA2126PA bằng Texas Instruments. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.
Texas Instruments
INA2126PA - Dual 36V Micropower Instrumentation Amplifier | Texas Instruments
INA2126PA ✓ Hoạt độngSo sánh thông số kỹ thuật
| Tham số | INA128PA | INA2126PA |
|---|---|---|
| Thương hiệu | Texas Instruments | Texas Instruments |
| Danh mục | Amplifier ICs | Amplifier ICs |
| Trạng thái vòng đời | Hoạt động | Hoạt động |
| Product Type | Precision instrumentation amplifier | Dual precision instrumentation amplifier |
| Architecture | Three-op-amp instrumentation amplifier | Two-op-amp instrumentation amplifier |
| Number of Circuits | 1 circuit | — |
| Hộp | 8-pin PDIP | 16-pin PDIP |
| Common-Mode Rejection Ratio | 130 dB | — |
| Minimum Common-Mode Rejection | 120 dB | — |
| Điện áp yên tĩnh | 700 µA | 175 μA per channel |
| Maximum Input Offset Voltage | 50 µV | — |
| Maximum Input Voltage Drift | 0.5 µV/°C | — |
| Maximum Input Bias Current | 5 nA | — |
| Input Protection | ±40 V | — |
| Supply Range | Up to ±18 V | — |
| Gain Range | 1 to 10,000 | — |
| Gain Setting | Single external resistor | — |
| Bandwidth at Gain 100 | 200 kHz | — |
| Green Product | Yes | — |
| Restricted Substances | No Sb/Br | — |
| Nhiệt độ hoạt động | -40°C to +85°C | — |
| Kiểu lắp đặt | Through-hole | Through-hole |
| Number of Channels | — | 2 channels |
| Supply Voltage Range | — | ±1.35 V to ±18 V |
| Maximum Supply Voltage | — | 36 V |
| Offset Voltage | — | 250 μV |
| Gain-Bandwidth Product | — | 200 kHz |
| Input Type | — | Differential input |
| Package Type | — | Through-hole PDIP |
| Application Category | — | Precision differential-signal acquisition |
| Portable Operation | — | Supported by low quiescent current |
| Trạng thái RoHS | — | [DATA_NEEDED: RoHS status] |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |
| Khoảng nhiệt độ hoạt động | — | [DATA_NEEDED: operating temperature range] |
| Gain Set Resistance | — | [DATA_NEEDED: gain-set resistor requirements] |